mwifiex: Fix reporting 'operation not supported' error code

ENOTSUPP (double PP) is internal linux kernel code 524 available only in
kernel include file linux/errno.h and not exported to userspace.

EOPNOTSUPP (OP; double PP) is standard code 95 for reporting 'operation not
supported' available via kernel include file uapi/asm-generic/errno.h.

ENOTSUP (single P) is alias for EOPNOTSUPP defined only in userspace
include file bits/errno.h and not available in kernel.

Because Linux kernel does not support ENOTSUP (single P) and because
userspace does not support ENOTSUPP (double PP), report error code for
'operation not supported' via EOPNOTSUPP macro.

This patch fixes problem that mwifiex kernel driver sends to userspace
unsupported error codes like: "failed: -524 (No error information)".
After applying this patch userspace see: "failed: -95 (Not supported)".
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200703112151.18917-1-pali@kernel.org

drivers/net/wireless/marvell/mwifiex/cfg80211.c

@@ -3727,11 +3727,11 @@ mwifiex_cfg80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev,
 	int ret;
 
 	if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	switch (action_code) {
 	case WLAN_TDLS_SETUP_REQUEST:
@@ -3799,11 +3799,11 @@ mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 
 	if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) ||
 	    !(wiphy->flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if (!(priv->bss_type == MWIFIEX_BSS_TYPE_STA && priv->media_connected))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mwifiex_dbg(priv->adapter, MSG,
 		    "TDLS peer=%pM, oper=%d\n", peer, action);
@@ -3833,7 +3833,7 @@ mwifiex_cfg80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 	default:
 		mwifiex_dbg(priv->adapter, ERROR,
 			    "tdls_oper: operation not supported\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	return mwifiex_tdls_oper(priv, peer, action);
@@ -3914,11 +3914,11 @@ mwifiex_cfg80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 
 	if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	return mwifiex_tdls_oper(priv, mac, MWIFIEX_TDLS_CREATE_LINK);
 }
@@ -4151,11 +4151,11 @@ mwifiex_cfg80211_change_station(struct wiphy *wiphy, struct net_device *dev,
 
 	/* we support change_station handler only for TDLS peers*/
 	if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	/* make sure we are in station mode and connected */
 	if ((priv->bss_type != MWIFIEX_BSS_TYPE_STA) || !priv->media_connected)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	priv->sta_params = params;
 

drivers/net/wireless/marvell/mwifiex/main.c

@@ -953,7 +953,7 @@ int mwifiex_set_mac_address(struct mwifiex_private *priv,
 	} else {
 		/* Internal mac address change */
 		if (priv->bss_type == MWIFIEX_BSS_TYPE_ANY)
-			return -ENOTSUPP;
+			return -EOPNOTSUPP;
 
 		mac_addr = old_mac_addr;
 

drivers/net/wireless/marvell/mwifiex/sta_cmd.c

@@ -1723,7 +1723,7 @@ mwifiex_cmd_tdls_config(struct mwifiex_private *priv,
 	default:
 		mwifiex_dbg(priv->adapter, ERROR,
 			    "Unknown TDLS configuration\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	le16_unaligned_add_cpu(&cmd->size, len);
@@ -1849,7 +1849,7 @@ mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 		break;
 	default:
 		mwifiex_dbg(priv->adapter, ERROR, "Unknown TDLS operation\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	le16_unaligned_add_cpu(&cmd->size, config_len);