Commit 91a00302 authored by Paul Mackerras's avatar Paul Mackerras Committed by Benjamin Herrenschmidt

powerpc: Sync RPA note in zImage with kernel's RPA note

Commit 9b09c6d9 ("powerpc: Change the
default link address for pSeries zImage kernels") changed the
real-base value in the CHRP note added by the addnote program from
12MB to 32MB to give more space for Open Firmware to load the zImage.
(The real-base value says where we want OF to position itself in
memory.)  However, this change was ineffective on most pSeries
machines, because the RPA note added by addnote has the "ignore me"
flag set to 1.  This was intended to tell OF to ignore just the RPA
note, but has the side effect of also making OF ignore the CHRP note
(at least on most pSeries machines).

To solve this we have to set the "ignore me" flag to 0 in the RPA
note.  (We can't just omit the RPA note because that is equivalent to
having an RPA note with default values, and the default values are not
what we want.)  However, then we have to make sure the values in the
zImage's RPA note match up with the values that the kernel supplies
later in prom_init.c with either the ibm,client-architecture-support
call or the process-elf-header call in prom_send_capabilities().

So this sets the "ignore me" flag in the RPA note in addnote to 0, and
adjusts the RPA note values in addnote.c and in prom_init.c to be
consistent with each other and with the values in ibm_architecture_vec.

However, since the wrapper is independent of the kernel, this doesn't
ensure that the notes will stay consistent.  To ensure that, this adds
code to addnote.c so that it can extract the kernel's RPA note from
the kernel binary and put that in the zImage.  To that end, we put the
kernel's fake ELF header (which contains the kernel's RPA note) into
its own section, and arrange for wrapper to pull out that section with
objcopy and pass it to addnote, which then extracts the RPA note from
it and transfers it to the zImage.
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 58f467ce
...@@ -11,7 +11,12 @@ ...@@ -11,7 +11,12 @@
* as published by the Free Software Foundation; either version * as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version. * 2 of the License, or (at your option) any later version.
* *
* Usage: addnote zImage * Usage: addnote zImage [note.elf]
*
* If note.elf is supplied, it is the name of an ELF file that contains
* an RPA note to use instead of the built-in one. Alternatively, the
* note.elf file may be empty, in which case the built-in RPA note is
* used (this is to simplify how this is invoked from the wrapper script).
*/ */
#include <stdio.h> #include <stdio.h>
#include <stdlib.h> #include <stdlib.h>
...@@ -43,27 +48,29 @@ char rpaname[] = "IBM,RPA-Client-Config"; ...@@ -43,27 +48,29 @@ char rpaname[] = "IBM,RPA-Client-Config";
*/ */
#define N_RPA_DESCR 8 #define N_RPA_DESCR 8
unsigned int rpanote[N_RPA_DESCR] = { unsigned int rpanote[N_RPA_DESCR] = {
0, /* lparaffinity */ 1, /* lparaffinity */
64, /* min_rmo_size */ 128, /* min_rmo_size */
0, /* min_rmo_percent */ 0, /* min_rmo_percent */
40, /* max_pft_size */ 46, /* max_pft_size */
1, /* splpar */ 1, /* splpar */
-1, /* min_load */ -1, /* min_load */
0, /* new_mem_def */ 1, /* new_mem_def */
1, /* ignore_my_client_config */ 0, /* ignore_my_client_config */
}; };
#define ROUNDUP(len) (((len) + 3) & ~3) #define ROUNDUP(len) (((len) + 3) & ~3)
unsigned char buf[512]; unsigned char buf[512];
unsigned char notebuf[512];
#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) #define GET_16BE(b, off) (((b)[off] << 8) + ((b)[(off)+1]))
#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) #define GET_32BE(b, off) ((GET_16BE((b), (off)) << 16) + \
GET_16BE((b), (off)+2))
#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ #define PUT_16BE(b, off, v) ((b)[off] = ((v) >> 8) & 0xff, \
buf[(off) + 1] = (v) & 0xff) (b)[(off) + 1] = (v) & 0xff)
#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ #define PUT_32BE(b, off, v) (PUT_16BE((b), (off), (v) >> 16), \
PUT_16BE((off) + 2, (v))) PUT_16BE((b), (off) + 2, (v)))
/* Structure of an ELF file */ /* Structure of an ELF file */
#define E_IDENT 0 /* ELF header */ #define E_IDENT 0 /* ELF header */
...@@ -88,15 +95,71 @@ unsigned char buf[512]; ...@@ -88,15 +95,71 @@ unsigned char buf[512];
unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
unsigned char *read_rpanote(const char *fname, int *nnp)
{
int notefd, nr, i;
int ph, ps, np;
int note, notesize;
notefd = open(fname, O_RDONLY);
if (notefd < 0) {
perror(fname);
exit(1);
}
nr = read(notefd, notebuf, sizeof(notebuf));
if (nr < 0) {
perror("read note");
exit(1);
}
if (nr == 0) /* empty file */
return NULL;
if (nr < E_HSIZE ||
memcmp(&notebuf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0 ||
notebuf[E_IDENT+EI_CLASS] != ELFCLASS32 ||
notebuf[E_IDENT+EI_DATA] != ELFDATA2MSB)
goto notelf;
close(notefd);
/* now look for the RPA-note */
ph = GET_32BE(notebuf, E_PHOFF);
ps = GET_16BE(notebuf, E_PHENTSIZE);
np = GET_16BE(notebuf, E_PHNUM);
if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
goto notelf;
for (i = 0; i < np; ++i, ph += ps) {
if (GET_32BE(notebuf, ph + PH_TYPE) != PT_NOTE)
continue;
note = GET_32BE(notebuf, ph + PH_OFFSET);
notesize = GET_32BE(notebuf, ph + PH_FILESZ);
if (notesize < 34 || note + notesize > nr)
continue;
if (GET_32BE(notebuf, note) != strlen(rpaname) + 1 ||
GET_32BE(notebuf, note + 8) != 0x12759999 ||
strcmp((char *)&notebuf[note + 12], rpaname) != 0)
continue;
/* looks like an RPA note, return it */
*nnp = notesize;
return &notebuf[note];
}
/* no RPA note found */
return NULL;
notelf:
fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", fname);
exit(1);
}
int int
main(int ac, char **av) main(int ac, char **av)
{ {
int fd, n, i; int fd, n, i;
int ph, ps, np; int ph, ps, np;
int nnote, nnote2, ns; int nnote, nnote2, ns;
unsigned char *rpap;
if (ac != 2) { if (ac != 2 && ac != 3) {
fprintf(stderr, "Usage: %s elf-file\n", av[0]); fprintf(stderr, "Usage: %s elf-file [rpanote.elf]\n", av[0]);
exit(1); exit(1);
} }
fd = open(av[1], O_RDWR); fd = open(av[1], O_RDWR);
...@@ -107,6 +170,7 @@ main(int ac, char **av) ...@@ -107,6 +170,7 @@ main(int ac, char **av)
nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr); nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr);
nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote); nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote);
rpap = NULL;
n = read(fd, buf, sizeof(buf)); n = read(fd, buf, sizeof(buf));
if (n < 0) { if (n < 0) {
...@@ -124,16 +188,19 @@ main(int ac, char **av) ...@@ -124,16 +188,19 @@ main(int ac, char **av)
exit(1); exit(1);
} }
ph = GET_32BE(E_PHOFF); if (ac == 3)
ps = GET_16BE(E_PHENTSIZE); rpap = read_rpanote(av[2], &nnote2);
np = GET_16BE(E_PHNUM);
ph = GET_32BE(buf, E_PHOFF);
ps = GET_16BE(buf, E_PHENTSIZE);
np = GET_16BE(buf, E_PHNUM);
if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
goto notelf; goto notelf;
if (ph + (np + 2) * ps + nnote + nnote2 > n) if (ph + (np + 2) * ps + nnote + nnote2 > n)
goto nospace; goto nospace;
for (i = 0; i < np; ++i) { for (i = 0; i < np; ++i) {
if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) {
fprintf(stderr, "%s already has a note entry\n", fprintf(stderr, "%s already has a note entry\n",
av[1]); av[1]);
exit(0); exit(0);
...@@ -148,37 +215,42 @@ main(int ac, char **av) ...@@ -148,37 +215,42 @@ main(int ac, char **av)
/* fill in the program header entry */ /* fill in the program header entry */
ns = ph + 2 * ps; ns = ph + 2 * ps;
PUT_32BE(ph + PH_TYPE, PT_NOTE); PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
PUT_32BE(ph + PH_OFFSET, ns); PUT_32BE(buf, ph + PH_OFFSET, ns);
PUT_32BE(ph + PH_FILESZ, nnote); PUT_32BE(buf, ph + PH_FILESZ, nnote);
/* fill in the note area we point to */ /* fill in the note area we point to */
/* XXX we should probably make this a proper section */ /* XXX we should probably make this a proper section */
PUT_32BE(ns, strlen(arch) + 1); PUT_32BE(buf, ns, strlen(arch) + 1);
PUT_32BE(ns + 4, N_DESCR * 4); PUT_32BE(buf, ns + 4, N_DESCR * 4);
PUT_32BE(ns + 8, 0x1275); PUT_32BE(buf, ns + 8, 0x1275);
strcpy((char *) &buf[ns + 12], arch); strcpy((char *) &buf[ns + 12], arch);
ns += 12 + strlen(arch) + 1; ns += 12 + strlen(arch) + 1;
for (i = 0; i < N_DESCR; ++i, ns += 4) for (i = 0; i < N_DESCR; ++i, ns += 4)
PUT_32BE(ns, descr[i]); PUT_32BE(buf, ns, descr[i]);
/* fill in the second program header entry and the RPA note area */ /* fill in the second program header entry and the RPA note area */
ph += ps; ph += ps;
PUT_32BE(ph + PH_TYPE, PT_NOTE); PUT_32BE(buf, ph + PH_TYPE, PT_NOTE);
PUT_32BE(ph + PH_OFFSET, ns); PUT_32BE(buf, ph + PH_OFFSET, ns);
PUT_32BE(ph + PH_FILESZ, nnote2); PUT_32BE(buf, ph + PH_FILESZ, nnote2);
/* fill in the note area we point to */ /* fill in the note area we point to */
PUT_32BE(ns, strlen(rpaname) + 1); if (rpap) {
PUT_32BE(ns + 4, sizeof(rpanote)); /* RPA note supplied in file, just copy the whole thing over */
PUT_32BE(ns + 8, 0x12759999); memcpy(buf + ns, rpap, nnote2);
strcpy((char *) &buf[ns + 12], rpaname); } else {
ns += 12 + ROUNDUP(strlen(rpaname) + 1); PUT_32BE(buf, ns, strlen(rpaname) + 1);
for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) PUT_32BE(buf, ns + 4, sizeof(rpanote));
PUT_32BE(ns, rpanote[i]); PUT_32BE(buf, ns + 8, 0x12759999);
strcpy((char *) &buf[ns + 12], rpaname);
ns += 12 + ROUNDUP(strlen(rpaname) + 1);
for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
PUT_32BE(buf, ns, rpanote[i]);
}
/* Update the number of program headers */ /* Update the number of program headers */
PUT_16BE(E_PHNUM, np + 2); PUT_16BE(buf, E_PHNUM, np + 2);
/* write back */ /* write back */
lseek(fd, (long) 0, SEEK_SET); lseek(fd, (long) 0, SEEK_SET);
......
...@@ -307,7 +307,9 @@ fi ...@@ -307,7 +307,9 @@ fi
# post-processing needed for some platforms # post-processing needed for some platforms
case "$platform" in case "$platform" in
pseries|chrp) pseries|chrp)
$objbin/addnote "$ofile" ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote
$objbin/addnote "$ofile" "$ofile".rpanote
rm -r "$ofile".rpanote
;; ;;
coff) coff)
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
......
...@@ -732,7 +732,7 @@ static struct fake_elf { ...@@ -732,7 +732,7 @@ static struct fake_elf {
u32 ignore_me; u32 ignore_me;
} rpadesc; } rpadesc;
} rpanote; } rpanote;
} fake_elf = { } fake_elf __section(.fakeelf) = {
.elfhdr = { .elfhdr = {
.e_ident = { 0x7f, 'E', 'L', 'F', .e_ident = { 0x7f, 'E', 'L', 'F',
ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, ELFCLASS32, ELFDATA2MSB, EV_CURRENT },
...@@ -774,13 +774,13 @@ static struct fake_elf { ...@@ -774,13 +774,13 @@ static struct fake_elf {
.type = 0x12759999, .type = 0x12759999,
.name = "IBM,RPA-Client-Config", .name = "IBM,RPA-Client-Config",
.rpadesc = { .rpadesc = {
.lpar_affinity = 0, .lpar_affinity = 1,
.min_rmo_size = 64, /* in megabytes */ .min_rmo_size = 128, /* in megabytes */
.min_rmo_percent = 0, .min_rmo_percent = 0,
.max_pft_size = 48, /* 2^48 bytes max PFT size */ .max_pft_size = 46, /* 2^46 bytes max PFT size */
.splpar = 1, .splpar = 1,
.min_load = ~0U, .min_load = ~0U,
.new_mem_def = 0 .new_mem_def = 1
} }
} }
}; };
......
...@@ -203,6 +203,9 @@ SECTIONS ...@@ -203,6 +203,9 @@ SECTIONS
*(.rela*) *(.rela*)
} }
/* Fake ELF header containing RPA note; for addnote */
.fakeelf : AT(ADDR(.fakeelf) - LOAD_OFFSET) { *(.fakeelf) }
/* freed after init ends here */ /* freed after init ends here */
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
__init_end = .; __init_end = .;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment