Commit 91ab4ed3 authored by Easwar Hariharan's avatar Easwar Hariharan Committed by Doug Ledford

staging/rdma/hfi1: Implement LED beaconing for maintenance

This patch implements LED beaconing for maintenance. A MAD packet with
the LEDInfo attribute set to 1 will enable LED beaconing with a duty
cycle of 2s on and 1.5s off. A MAD packet with the LEDInfo attribute
set to 0 will disable beaconing and return the LED to normal operation.
Reviewed-by: default avatarDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: default avatarEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: default avatarMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: default avatarJubin John <jubin.john@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
parent 7b0b01aa
......@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
......@@ -18,7 +18,7 @@
*
* BSD LICENSE
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
......@@ -1172,63 +1172,64 @@ int hfi1_set_lid(struct hfi1_pportdata *ppd, u32 lid, u8 lmc)
return 0;
}
/*
* Following deal with the "obviously simple" task of overriding the state
* of the LEDs, which normally indicate link physical and logical status.
* The complications arise in dealing with different hardware mappings
* and the board-dependent routine being called from interrupts.
* and then there's the requirement to _flash_ them.
*/
#define LED_OVER_FREQ_SHIFT 8
#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT)
/* Below is "non-zero" to force override, but both actual LEDs are off */
#define LED_OVER_BOTH_OFF (8)
void shutdown_led_override(struct hfi1_pportdata *ppd)
{
struct hfi1_devdata *dd = ppd->dd;
if (atomic_read(&ppd->led_override_timer_active)) {
del_timer_sync(&ppd->led_override_timer);
atomic_set(&ppd->led_override_timer_active, 0);
}
/* Shut off LEDs after we are sure timer is not running */
setextled(dd, 0);
}
static void run_led_override(unsigned long opaque)
{
struct hfi1_pportdata *ppd = (struct hfi1_pportdata *)opaque;
struct hfi1_devdata *dd = ppd->dd;
int timeoff;
int ph_idx;
unsigned long timeout;
int phase_idx;
if (!(dd->flags & HFI1_INITTED))
return;
ph_idx = ppd->led_override_phase++ & 1;
ppd->led_override = ppd->led_override_vals[ph_idx];
timeoff = ppd->led_override_timeoff;
phase_idx = ppd->led_override_phase & 1;
setextled(dd, phase_idx);
timeout = ppd->led_override_vals[phase_idx];
/* Set up for next phase */
ppd->led_override_phase = !ppd->led_override_phase;
/*
* don't re-fire the timer if user asked for it to be off; we let
* it fire one more time after they turn it off to simplify
*/
if (ppd->led_override_vals[0] || ppd->led_override_vals[1])
mod_timer(&ppd->led_override_timer, jiffies + timeoff);
mod_timer(&ppd->led_override_timer, jiffies + timeout);
else
/* Hand control of the LED to the DC for normal operation */
write_csr(dd, DCC_CFG_LED_CNTRL, 0);
}
void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int val)
/*
* To have the LED blink in a particular pattern, provide timeon and timeoff
* in milliseconds. To turn off custom blinking and return to normal operation,
* provide timeon = timeoff = 0.
*/
void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int timeon,
unsigned int timeoff)
{
struct hfi1_devdata *dd = ppd->dd;
int timeoff, freq;
if (!(dd->flags & HFI1_INITTED))
return;
/* First check if we are blinking. If not, use 1HZ polling */
timeoff = HZ;
freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT;
if (freq) {
/* For blink, set each phase from one nybble of val */
ppd->led_override_vals[0] = val & 0xF;
ppd->led_override_vals[1] = (val >> 4) & 0xF;
timeoff = (HZ << 4)/freq;
} else {
/* Non-blink set both phases the same. */
ppd->led_override_vals[0] = val & 0xF;
ppd->led_override_vals[1] = val & 0xF;
}
ppd->led_override_timeoff = timeoff;
/* Convert to jiffies for direct use in timer */
ppd->led_override_vals[0] = msecs_to_jiffies(timeoff);
ppd->led_override_vals[1] = msecs_to_jiffies(timeon);
ppd->led_override_phase = 1; /* Arbitrarily start from LED on phase */
/*
* If the timer has not already been started, do so. Use a "quick"
......@@ -1293,14 +1294,8 @@ int hfi1_reset_device(int unit)
for (pidx = 0; pidx < dd->num_pports; ++pidx) {
ppd = dd->pport + pidx;
if (atomic_read(&ppd->led_override_timer_active)) {
/* Need to stop LED timer, _then_ shut off LEDs */
del_timer_sync(&ppd->led_override_timer);
atomic_set(&ppd->led_override_timer_active, 0);
}
/* Shut off LEDs after we are sure timer is not running */
ppd->led_override = LED_OVER_BOTH_OFF;
shutdown_led_override(ppd);
}
if (dd->flags & HFI1_HAS_SEND_DMA)
sdma_exit(dd);
......
......@@ -7,7 +7,7 @@
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
......@@ -20,7 +20,7 @@
*
* BSD LICENSE
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
......@@ -669,14 +669,17 @@ struct hfi1_pportdata {
u8 overrun_threshold;
u8 phy_error_threshold;
/* used to override LED behavior */
u8 led_override; /* Substituted for normal value, if non-zero */
u16 led_override_timeoff; /* delta to next timer event */
u8 led_override_vals[2]; /* Alternates per blink-frame */
u8 led_override_phase; /* Just counts, LSB picks from vals[] */
/* Used to override LED behavior for things like maintenance beaconing*/
/*
* Alternates per phase of blink
* [0] holds LED off duration, [1] holds LED on duration
*/
unsigned long led_override_vals[2];
u8 led_override_phase; /* LSB picks from vals[] */
atomic_t led_override_timer_active;
/* Used to flash LEDs in override mode */
struct timer_list led_override_timer;
u32 sm_trap_qp;
u32 sa_qp;
......@@ -1599,14 +1602,14 @@ void hfi1_free_devdata(struct hfi1_devdata *);
void cc_state_reclaim(struct rcu_head *rcu);
struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra);
void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int timeon,
unsigned int timeoff);
/*
* Set LED override, only the two LSBs have "public" meaning, but
* any non-zero value substitutes them for the Link and LinkTrain
* LED states.
* Only to be used for driver unload or device reset where we cannot allow
* the timer to fire even the one extra time, else use hfi1_set_led_override
* with timeon = timeoff = 0
*/
#define HFI1_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
#define HFI1_LED_LOG 2 /* Logical (link) YELLOW LED */
void hfi1_set_led_override(struct hfi1_pportdata *ppd, unsigned int val);
void shutdown_led_override(struct hfi1_pportdata *ppd);
#define HFI1_CREDIT_RETURN_RATE (100)
......
......@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
......@@ -18,7 +18,7 @@
*
* BSD LICENSE
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
......@@ -908,6 +908,8 @@ static void shutdown_device(struct hfi1_devdata *dd)
/* disable the send device */
pio_send_control(dd, PSC_GLOBAL_DISABLE);
shutdown_led_override(ppd);
/*
* Clear SerdesEnable.
* We can't count on interrupts since we are stopping.
......
......@@ -5,7 +5,7 @@
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
......@@ -18,7 +18,7 @@
*
* BSD LICENSE
*
* Copyright(c) 2015 Intel Corporation.
* Copyright(c) 2015, 2016 Intel Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
......@@ -3449,7 +3449,10 @@ static int __subn_set_opa_led_info(struct opa_smp *smp, u32 am, u8 *data,
return reply((struct ib_mad_hdr *)smp);
}
setextled(dd, on);
if (on)
hfi1_set_led_override(dd->pport, 2000, 1500);
else
hfi1_set_led_override(dd->pport, 0, 0);
return __subn_get_opa_led_info(smp, am, data, ibdev, port, resp_len);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment