Commit 91be260f authored by Nicolas Sugino's avatar Nicolas Sugino Committed by Mauro Carvalho Chehab

[media] dib8000: Add support for Mygica/Geniatech S2870

MyGica/Geniatech S2870 is very similar to the S870 but with dual tuner. The card is recognised as Geniatech STK8096-PVR.

[mchehab@osg.samsung.com: Fix some checkpatch.pl issues]
Signed-off-by: default avatarNicolas Sugino <nsugino@3way.com.ar>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 99e44da7
......@@ -118,6 +118,7 @@
#define USB_PID_DIBCOM_STK807XP 0x1f90
#define USB_PID_DIBCOM_STK807XPVR 0x1f98
#define USB_PID_DIBCOM_STK8096GP 0x1fa0
#define USB_PID_DIBCOM_STK8096PVR 0x1faa
#define USB_PID_DIBCOM_NIM8096MD 0x1fa8
#define USB_PID_DIBCOM_TFE8096P 0x1f9C
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
......
......@@ -1736,8 +1736,13 @@ static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
return -ENODEV;
if (adap->id == 0) {
if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
return -ENODEV;
} else {
if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
return -ENODEV;
}
st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
......@@ -1773,6 +1778,20 @@ static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int stk809x_frontend1_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *state = adap->priv;
if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
return -ENODEV;
state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x82, 0);
adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
......@@ -3794,6 +3813,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
/* 80 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) },
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E) },
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E_SE) },
{ USB_DEVICE(USB_VID_PCTV, USB_PID_DIBCOM_STK8096PVR) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
......@@ -4959,6 +4979,59 @@ struct dvb_usb_device_properties dib0700_devices[] = {
RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 2,
.adapter = {
{
.num_frontends = 1,
.fe = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
.frontend_attach = stk809x_frontend_attach,
.tuner_attach = dib809x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
} },
.size_of_priv =
sizeof(struct dib0700_adapter_state),
}, {
.num_frontends = 1,
.fe = { {
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
.pid_filter = stk80xx_pid_filter,
.pid_filter_ctrl = stk80xx_pid_filter_ctrl,
.frontend_attach = stk809x_frontend1_attach,
.tuner_attach = dib809x_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
} },
.size_of_priv =
sizeof(struct dib0700_adapter_state),
},
},
.num_device_descs = 1,
.devices = {
{ "DiBcom STK8096-PVR reference design",
{ &dib0700_usb_id_table[83], NULL },
{ NULL },
},
},
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
.module_name = "dib0700",
.rc_query = dib0700_rc_query_old_firmware,
.allowed_protos = RC_BIT_RC5 |
RC_BIT_RC6_MCE |
RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment