pinctrl: intel: Convert capability list to features

Communities can have features provided in the capability list.
Traverse the list and convert to respective features.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

drivers/pinctrl/intel/pinctrl-intel.c

@@ -29,6 +29,16 @@
 #define REVID_SHIFT			16
 #define REVID_MASK			GENMASK(31, 16)
 
+#define CAPLIST				0x004
+#define CAPLIST_ID_SHIFT		16
+#define CAPLIST_ID_MASK			GENMASK(23, 16)
+#define CAPLIST_ID_GPIO_HW_INFO		1
+#define CAPLIST_ID_PWM			2
+#define CAPLIST_ID_BLINK		3
+#define CAPLIST_ID_EXP			4
+#define CAPLIST_NEXT_SHIFT		0
+#define CAPLIST_NEXT_MASK		GENMASK(15, 0)
+
 #define PADBAR				0x00c
 
 #define PADOWN_BITS			4
@@ -1472,7 +1482,7 @@ static int intel_pinctrl_probe(struct platform_device *pdev,
 	for (i = 0; i < pctrl->ncommunities; i++) {
 		struct intel_community *community = &pctrl->communities[i];
 		void __iomem *regs;
-		u32 padbar;
+		u32 offset;
 		u32 value;
 
 		*community = pctrl->soc->communities[i];
@@ -1488,11 +1498,36 @@ static int intel_pinctrl_probe(struct platform_device *pdev,
 			community->features |= PINCTRL_FEATURE_1K_PD;
 		}
 
+		/* Determine community features based on the capabilities */
+		offset = CAPLIST;
+		do {
+			value = readl(regs + offset);
+			switch ((value & CAPLIST_ID_MASK) >> CAPLIST_ID_SHIFT) {
+			case CAPLIST_ID_GPIO_HW_INFO:
+				community->features |= PINCTRL_FEATURE_GPIO_HW_INFO;
+				break;
+			case CAPLIST_ID_PWM:
+				community->features |= PINCTRL_FEATURE_PWM;
+				break;
+			case CAPLIST_ID_BLINK:
+				community->features |= PINCTRL_FEATURE_BLINK;
+				break;
+			case CAPLIST_ID_EXP:
+				community->features |= PINCTRL_FEATURE_EXP;
+				break;
+			default:
+				break;
+			}
+			offset = (value & CAPLIST_NEXT_MASK) >> CAPLIST_NEXT_SHIFT;
+		} while (offset);
+
+		dev_dbg(&pdev->dev, "Community%d features: %#08x\n", i, community->features);
+
 		/* Read offset of the pad configuration registers */
-		padbar = readl(regs + PADBAR);
+		offset = readl(regs + PADBAR);
 
 		community->regs = regs;
-		community->pad_regs = regs + padbar;
+		community->pad_regs = regs + offset;
 
 		if (community->gpps)
 			ret = intel_pinctrl_add_padgroups_by_gpps(pctrl, community);

drivers/pinctrl/intel/pinctrl-intel.h

@@ -143,6 +143,10 @@ struct intel_community {
 /* Additional features supported by the hardware */
 #define PINCTRL_FEATURE_DEBOUNCE	BIT(0)
 #define PINCTRL_FEATURE_1K_PD		BIT(1)
+#define PINCTRL_FEATURE_GPIO_HW_INFO	BIT(2)
+#define PINCTRL_FEATURE_PWM		BIT(3)
+#define PINCTRL_FEATURE_BLINK		BIT(4)
+#define PINCTRL_FEATURE_EXP		BIT(5)
 
 /**
  * PIN_GROUP - Declare a pin group