Merge tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Huawei B593u-12

 - added support for virt board aligned to QEMU MIPS virt board

 - added support for doing DMA coherence on a per device base

 - reworked handling of RALINK SoCs

 - cleanup for Loongon64 barriers

 - removed deprecated support for MIPS_CMP SMP handling method

 - removed support Sibyte CARMEL and CHRINE boards

 - cleanups and fixes

* tag 'mips_6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
  MIPS: uprobes: Restore thread.trap_nr
  MIPS: Don't clear _PAGE_SPECIAL in _PAGE_CHG_MASK
  MIPS: Sink body of check_bugs_early() into its only call site
  MIPS: Mark check_bugs() as __init
  Revert "MIPS: generic: Enable all CPUs supported by virt board in Kconfig"
  MIPS: octeon_switch: Remove duplicated labels
  MIPS: loongson2ef: Add missing break in cs5536_isa
  MIPS: Remove set_swbp() in uprobes.c
  MIPS: Use def_bool y for ARCH_SUPPORTS_UPROBES
  MIPS: fw: Allow firmware to pass a empty env
  MIPS: Remove deprecated CONFIG_MIPS_CMP
  MIPS: lantiq: remove unused function declaration
  MIPS: Drop unused positional parameter in local_irq_{dis,en}able
  MIPS: mm: Remove local_cache_flush_page
  MIPS: Remove no longer used ide.h
  MIPS: mm: Remove unused *cache_page_indexed flush functions
  MIPS: generic: Enable all CPUs supported by virt board in Kconfig
  MIPS: Add board config for virt board
  MIPS: Octeon: Disable CVMSEG by default on other platforms
  MIPS: Loongson: Don't select platform features with CPU
  ...

Documentation/devicetree/bindings/mips/loongson/devices.yaml

@@ -37,6 +37,18 @@ properties:
         items:
           - const: loongson,loongson64v-4core-virtio
 
+      - description: LS1B based boards
+        items:
+          - enum:
+              - loongson,lsgz-1b-dev
+          - const: loongson,ls1b
+
+      - description: LS1C based boards
+        items:
+          - enum:
+              - loongmasses,smartloong-1c
+          - const: loongson,ls1c
+
 additionalProperties: true
 
 ...

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -777,6 +777,8 @@ patternProperties:
     description: Lontium Semiconductor Corporation
   "^loongson,.*":
     description: Loongson Technology Corporation Limited
+  "^loongmasses,.*":
+    description: Nanjing Loongmasses Ltd.
   "^lsi,.*":
     description: LSI Corp. (LSI Logic)
   "^lwn,.*":

arch/mips/Kbuild.platforms

@@ -29,7 +29,6 @@ platform-$(CONFIG_SGI_IP30)		+= sgi-ip30/
 platform-$(CONFIG_SGI_IP32)		+= sgi-ip32/
 platform-$(CONFIG_SIBYTE_BCM112X)	+= sibyte/
 platform-$(CONFIG_SIBYTE_SB1250)	+= sibyte/
-platform-$(CONFIG_SIBYTE_BCM1x55)	+= sibyte/
 platform-$(CONFIG_SIBYTE_BCM1x80)	+= sibyte/
 platform-$(CONFIG_SNI_RM)		+= sni/
 platform-$(CONFIG_MACH_TX49XX)		+= txx9/

arch/mips/Kconfig

@@ -16,7 +16,6 @@ config MIPS
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
-	select ARCH_SUPPORTS_UPROBES
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
 	select ARCH_USE_MEMTEST
@@ -113,7 +112,6 @@ config MACH_INGENIC
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT
 	select DMA_NONCOHERENT
-	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select IRQ_MIPS_CPU
 	select PINCTRL
 	select GPIOLIB
@@ -132,7 +130,6 @@ choice
 
 config MIPS_GENERIC_KERNEL
 	bool "Generic board-agnostic MIPS kernel"
-	select ARCH_HAS_SETUP_DMA_OPS
 	select MIPS_GENERIC
 	select BOOT_RAW
 	select BUILTIN_DTB
@@ -488,7 +485,6 @@ config MACH_LOONGSON64
 	select BOARD_SCACHE
 	select CSRC_R4K
 	select CEVT_R4K
-	select CPU_HAS_WB
 	select FORCE_PCI
 	select ISA
 	select I8259
@@ -565,7 +561,6 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MICROMIPS
 	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MIPS_CPS
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_RELOCATABLE
@@ -793,24 +788,6 @@ config SGI_IP32
 	help
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
-config SIBYTE_CRHINE
-	bool "Sibyte BCM91120C-CRhine"
-	select BOOT_ELF32
-	select SIBYTE_BCM1120
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_SB1
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_CARMEL
-	bool "Sibyte BCM91120x-Carmel"
-	select BOOT_ELF32
-	select SIBYTE_BCM1120
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_SB1
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
@@ -824,7 +801,7 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select SIBYTE_BCM1125H
+	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -1075,7 +1052,7 @@ config FW_CFE
 	bool
 
 config ARCH_SUPPORTS_UPROBES
-	bool
+	def_bool y
 
 config DMA_NONCOHERENT
 	bool
@@ -1086,8 +1063,10 @@ config DMA_NONCOHERENT
 	# by pgprot_writcombine can be mixed, and the latter sometimes provides
 	# significant advantages.
 	#
+	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_DMA_WRITE_COMBINE
 	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select ARCH_HAS_DMA_SET_UNCACHED
 	select DMA_NONCOHERENT_MMAP
@@ -1181,12 +1160,6 @@ config SYS_SUPPORTS_LITTLE_ENDIAN
 config MIPS_HUGE_TLB_SUPPORT
 	def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
 
-config IRQ_MSP_SLP
-	bool
-
-config IRQ_MSP_CIC
-	bool
-
 config IRQ_TXX9
 	bool
 
@@ -1364,7 +1337,6 @@ config CPU_LOONGSON2F
 	bool "Loongson 2F"
 	depends on SYS_HAS_CPU_LOONGSON2F
 	select CPU_LOONGSON2EF
-	select GPIOLIB
 	help
 	  The Loongson 2F processor implements the MIPS III instruction set
 	  with many extensions.
@@ -1786,7 +1758,6 @@ config CPU_LOONGSON2EF
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
-	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON32
 	bool
@@ -1851,11 +1822,9 @@ config SYS_HAS_CPU_MIPS32_R3_5
 
 config SYS_HAS_CPU_MIPS32_R5
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_MIPS32_R6
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_MIPS64_R1
 	bool
@@ -1865,15 +1834,12 @@ config SYS_HAS_CPU_MIPS64_R2
 
 config SYS_HAS_CPU_MIPS64_R5
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_MIPS64_R6
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_P5600
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_R3000
 	bool
@@ -1898,7 +1864,6 @@ config SYS_HAS_CPU_NEVADA
 
 config SYS_HAS_CPU_R10000
 	bool
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
 
 config SYS_HAS_CPU_RM7000
 	bool
@@ -1927,7 +1892,6 @@ config SYS_HAS_CPU_BMIPS4380
 config SYS_HAS_CPU_BMIPS5000
 	bool
 	select SYS_HAS_CPU_BMIPS
-	select ARCH_HAS_SYNC_DMA_FOR_CPU
 
 #
 # CPU may reorder R->R, R->W, W->R, W->W
@@ -2298,15 +2262,10 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.
 
-config MIPS_VPE_LOADER_CMP
-	bool
-	default "y"
-	depends on MIPS_VPE_LOADER && MIPS_CMP
-
 config MIPS_VPE_LOADER_MT
 	bool
 	default "y"
-	depends on MIPS_VPE_LOADER && !MIPS_CMP
+	depends on MIPS_VPE_LOADER
 
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
@@ -2322,31 +2281,10 @@ config MIPS_VPE_APSP_API
 	bool "Enable support for AP/SP API (RTLX)"
 	depends on MIPS_VPE_LOADER
 
-config MIPS_VPE_APSP_API_CMP
-	bool
-	default "y"
-	depends on MIPS_VPE_APSP_API && MIPS_CMP
-
 config MIPS_VPE_APSP_API_MT
 	bool
 	default "y"
-	depends on MIPS_VPE_APSP_API && !MIPS_CMP
-
-config MIPS_CMP
-	bool "MIPS CMP framework support (DEPRECATED)"
-	depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
-	select SMP
-	select SYNC_R4K
-	select SYS_SUPPORTS_SMP
-	select WEAK_ORDERING
-	default n
-	help
-	  Select this if you are using a bootloader which implements the "CMP
-	  framework" protocol (ie. YAMON) and want your kernel to make use of
-	  its ability to start secondary CPUs.
-
-	  Unless you have a specific need, you should use CONFIG_MIPS_CPS
-	  instead of this.
+	depends on MIPS_VPE_APSP_API
 
 config MIPS_CPS
 	bool "MIPS Coherent Processing System support"
@@ -2802,9 +2740,6 @@ config HOTPLUG_CPU
 config SMP_UP
 	bool
 
-config SYS_SUPPORTS_MIPS_CMP
-	bool
-
 config SYS_SUPPORTS_MIPS_CPS
 	bool
 

arch/mips/Makefile

@@ -181,9 +181,47 @@ endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
 
+cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
+ifdef CONFIG_CPU_LOONGSON64
+cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
+cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
+cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
+endif
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
+
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
+endif
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON64)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
 
 # For smartmips configurations, there are hundreds of warnings due to ISA overrides
 # in assembly and header files. smartmips is only supported for MIPS32r1 onwards

arch/mips/ath79/Kconfig

@@ -29,20 +29,4 @@ config SOC_QCA955X
 config PCI_AR724X
 	def_bool n
 
-config ATH79_DEV_GPIO_BUTTONS
-	def_bool n
-
-config ATH79_DEV_LEDS_GPIO
-	def_bool n
-
-config ATH79_DEV_SPI
-	def_bool n
-
-config ATH79_DEV_USB
-	def_bool n
-
-config ATH79_DEV_WMAC
-	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-	def_bool n
-
 endif

arch/mips/bcm47xx/board.c

@@ -193,6 +193,7 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
 /* boardtype, boardnum, boardrev */
 static const
 struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
+	{{BCM47XX_BOARD_HUAWEI_B593U_12, "Huawei B593u-12"}, "0x053d", "1234", "0x1301"},
 	{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
 	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
 	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},

arch/mips/bcm47xx/leds.c

@@ -222,6 +222,11 @@ bcm47xx_leds_dlink_dir330[] __initconst = {
 
 /* Huawei */
 
+static const struct gpio_led
+bcm47xx_leds_huawei_b593u_12[] __initconst = {
+	BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_huawei_e970[] __initconst = {
 	BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -672,6 +677,9 @@ void __init bcm47xx_leds_register(void)
 		bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
 		break;
 
+	case BCM47XX_BOARD_HUAWEI_B593U_12:
+		bcm47xx_set_pdata(bcm47xx_leds_huawei_b593u_12);
+		break;
 	case BCM47XX_BOARD_HUAWEI_E970:
 		bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
 		break;

arch/mips/cavium-octeon/Kconfig

@@ -14,7 +14,8 @@ config CAVIUM_CN63XXP1
 config CAVIUM_OCTEON_CVMSEG_SIZE
 	int "Number of L1 cache lines reserved for CVMSEG memory"
 	range 0 54
-	default 1
+	default 0 if !CAVIUM_OCTEON_SOC
+	default 1 if CAVIUM_OCTEON_SOC
 	help
 	  CVMSEG LM is a segment that accesses portions of the dcache as a
 	  local memory; the larger CVMSEG is, the smaller the cache is.

arch/mips/cavium-octeon/octeon-irq.c

@@ -2290,7 +2290,7 @@ static irqreturn_t octeon_irq_cib_handler(int my_irq, void *data)
 static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 				      struct device_node *parent)
 {
-	const __be32 *addr;
+	struct resource res;
 	u32 val;
 	struct octeon_irq_cib_host_data *host_data;
 	int parent_irq;
@@ -2309,21 +2309,19 @@ static int __init octeon_irq_init_cib(struct device_node *ciu_node,
 		return -ENOMEM;
 	raw_spin_lock_init(&host_data->lock);
 
-	addr = of_get_address(ciu_node, 0, NULL, NULL);
-	if (!addr) {
+	r = of_address_to_resource(ciu_node, 0, &res);
+	if (r) {
 		pr_err("ERROR: Couldn't acquire reg(0) %pOFn\n", ciu_node);
-		return -EINVAL;
+		return r;
 	}
-	host_data->raw_reg = (u64)phys_to_virt(
-		of_translate_address(ciu_node, addr));
+	host_data->raw_reg = (u64)phys_to_virt(res.start);
 
-	addr = of_get_address(ciu_node, 1, NULL, NULL);
-	if (!addr) {
+	r = of_address_to_resource(ciu_node, 1, &res);
+	if (r) {
 		pr_err("ERROR: Couldn't acquire reg(1) %pOFn\n", ciu_node);
-		return -EINVAL;
+		return r;
 	}
-	host_data->en_reg = (u64)phys_to_virt(
-		of_translate_address(ciu_node, addr));
+	host_data->en_reg = (u64)phys_to_virt(res.start);
 
 	r = of_property_read_u32(ciu_node, "cavium,max-bits", &val);
 	if (r) {
@@ -2874,11 +2872,11 @@ static struct irq_chip octeon_irq_chip_ciu3_mbox = {
 static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
 				       struct device_node *parent)
 {
-	int i;
+	int i, ret;
 	int node;
 	struct irq_domain *domain;
 	struct octeon_ciu3_info *ciu3_info;
-	const __be32 *zero_addr;
+	struct resource res;
 	u64 base_addr;
 	union cvmx_ciu3_const consts;
 
@@ -2888,14 +2886,11 @@ static int __init octeon_irq_init_ciu3(struct device_node *ciu_node,
 	if (!ciu3_info)
 		return -ENOMEM;
 
-	zero_addr = of_get_address(ciu_node, 0, NULL, NULL);
-	if (WARN_ON(!zero_addr))
-		return -EINVAL;
-
-	base_addr = of_translate_address(ciu_node, zero_addr);
-	base_addr = (u64)phys_to_virt(base_addr);
+	ret = of_address_to_resource(ciu_node, 0, &res);
+	if (WARN_ON(ret))
+		return ret;
 
-	ciu3_info->ciu3_addr = base_addr;
+	ciu3_info->ciu3_addr = base_addr = (u64)phys_to_virt(res.start);
 	ciu3_info->node = node;
 
 	consts.u64 = cvmx_read_csr(base_addr + CIU3_CONST);

arch/mips/configs/generic/board-virt.config

+CONFIG_COMMON_CLK=y
+
+CONFIG_GOLDFISH=y
+CONFIG_GOLDFISH_PIC=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_HOST_GENERIC=y
+
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GOLDFISH=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_XHCI_HCD=y
+
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y

arch/mips/fw/lib/cmdline.c

@@ -53,7 +53,7 @@ char *fw_getenv(char *envname)
 {
 	char *result = NULL;
 
-	if (_fw_envp != NULL) {
+	if (_fw_envp != NULL && fw_envp(0) != NULL) {
 		/*
 		 * Return a pointer to the given environment variable.
 		 * YAMON uses "name", "value" pairs, while U-Boot uses

arch/mips/include/asm/asmmacro.h

@@ -45,12 +45,12 @@
 #endif
 
 #ifdef CONFIG_CPU_HAS_DIEI
-	.macro	local_irq_enable reg=t0
+	.macro	local_irq_enable
 	ei
 	irq_enable_hazard
 	.endm
 
-	.macro	local_irq_disable reg=t0
+	.macro	local_irq_disable
 	di
 	irq_disable_hazard
 	.endm

arch/mips/include/asm/bugs.h

@@ -24,13 +24,7 @@ extern void check_bugs64_early(void);
 extern void check_bugs32(void);
 extern void check_bugs64(void);
 
-static inline void check_bugs_early(void)
-{
-	if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
-		check_bugs64_early();
-}
-
-static inline void check_bugs(void)
+static inline void __init check_bugs(void)
 {
 	unsigned int cpu = smp_processor_id();
 

arch/mips/include/asm/cache.h

@@ -16,4 +16,6 @@
 
 #define __read_mostly __section(".data..read_mostly")
 
+extern void cache_noop(void);
+
 #endif /* _ASM_CACHE_H */

arch/mips/include/asm/cacheflush.h

@@ -110,7 +110,6 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 	unsigned long len);
 
 extern void (*flush_icache_all)(void);
-extern void (*local_flush_data_cache_page)(void * addr);
 extern void (*flush_data_cache_page)(unsigned long addr);
 
 /* Run kernel code uncached, useful for cache probing functions. */

arch/mips/include/asm/cpu-features.h

@@ -118,10 +118,27 @@
 #define cpu_has_3k_cache	__isa_lt_and_opt(1, MIPS_CPU_3K_CACHE)
 #endif
 #ifndef cpu_has_4k_cache
-#define cpu_has_4k_cache	__isa_ge_or_opt(1, MIPS_CPU_4K_CACHE)
+#define cpu_has_4k_cache	__opt(MIPS_CPU_4K_CACHE)
 #endif
 #ifndef cpu_has_octeon_cache
-#define cpu_has_octeon_cache	0
+#define cpu_has_octeon_cache						\
+({									\
+	int __res;							\
+									\
+	switch (current_cpu_type()) {					\
+	case CPU_CAVIUM_OCTEON:						\
+	case CPU_CAVIUM_OCTEON_PLUS:					\
+	case CPU_CAVIUM_OCTEON2:					\
+	case CPU_CAVIUM_OCTEON3:					\
+		__res = 1;						\
+		break;							\
+									\
+	default:							\
+		__res = 0;						\
+	}								\
+									\
+	__res;								\
+})
 #endif
 /* Don't override `cpu_has_fpu' to 1 or the "nofpu" option won't work.  */
 #ifndef cpu_has_fpu

arch/mips/include/asm/ide.h

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * This file contains the MIPS architecture specific IDE code.
- */
-#ifndef __ASM_IDE_H
-#define __ASM_IDE_H
-
-#include <ide.h>
-
-#endif /* __ASM_IDE_H */

arch/mips/include/asm/io.h

@@ -210,7 +210,7 @@ void iounmap(const volatile void __iomem *addr);
 #define ioremap_wc(offset, size)					\
 	ioremap_prot((offset), (size), boot_cpu_data.writecombine)
 
-#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64)
+#if defined(CONFIG_CPU_CAVIUM_OCTEON)
 #define war_io_reorder_wmb()		wmb()
 #else
 #define war_io_reorder_wmb()		barrier()

arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h

@@ -53,6 +53,7 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_DLINK_DIR130,
 	BCM47XX_BOARD_DLINK_DIR330,
 
+	BCM47XX_BOARD_HUAWEI_B593U_12,
 	BCM47XX_BOARD_HUAWEI_E970,
 
 	BCM47XX_BOARD_LINKSYS_E900V1,

arch/mips/include/asm/mach-generic/ide.h

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994-1996  Linus Torvalds & authors
- *
- * Copied from i386; many of the especially older MIPS or ISA-based platforms
- * are basically identical.  Using this file probably implies i8259 PIC
- * support in a system but the very least interrupt numbers 0 - 15 need to
- * be put aside for legacy devices.
- */
-#ifndef __ASM_MACH_GENERIC_IDE_H
-#define __ASM_MACH_GENERIC_IDE_H
-
-#ifdef __KERNEL__
-
-#include <linux/pci.h>
-#include <linux/stddef.h>
-#include <asm/processor.h>
-
-/* MIPS port and memory-mapped I/O string operations.  */
-static inline void __ide_flush_prologue(void)
-{
-#ifdef CONFIG_SMP
-	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
-		preempt_disable();
-#endif
-}
-
-static inline void __ide_flush_epilogue(void)
-{
-#ifdef CONFIG_SMP
-	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
-		preempt_enable();
-#endif
-}
-
-static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
-{
-	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
-		unsigned long end = addr + size;
-
-		while (addr < end) {
-			local_flush_data_cache_page((void *)addr);
-			addr += PAGE_SIZE;
-		}
-	}
-}
-
-/*
- * insw() and gang might be called with interrupts disabled, so we can't
- * send IPIs for flushing due to the potencial of deadlocks, see the comment
- * above smp_call_function() in arch/mips/kernel/smp.c.	 We work around the
- * problem by disabling preemption so we know we actually perform the flush
- * on the processor that actually has the lines to be flushed which hopefully
- * is even better for performance anyway.
- */
-static inline void __ide_insw(unsigned long port, void *addr,
-	unsigned int count)
-{
-	__ide_flush_prologue();
-	insw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
-{
-	__ide_flush_prologue();
-	insl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_outsw(unsigned long port, const void *addr,
-	unsigned long count)
-{
-	__ide_flush_prologue();
-	outsw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_outsl(unsigned long port, const void *addr,
-	unsigned long count)
-{
-	__ide_flush_prologue();
-	outsl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	readsw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	readsl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	writesw(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 2);
-	__ide_flush_epilogue();
-}
-
-static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
-{
-	__ide_flush_prologue();
-	writesl(port, addr, count);
-	__ide_flush_dcache_range((unsigned long)addr, count * 4);
-	__ide_flush_epilogue();
-}
-
-/* ide_insw calls insw, not __ide_insw.	 Why? */
-#undef insw
-#undef insl
-#undef outsw
-#undef outsl
-#define insw(port, addr, count) __ide_insw(port, addr, count)
-#define insl(port, addr, count) __ide_insl(port, addr, count)
-#define outsw(port, addr, count) __ide_outsw(port, addr, count)
-#define outsl(port, addr, count) __ide_outsl(port, addr, count)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_MACH_GENERIC_IDE_H */

arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h

@@ -94,9 +94,6 @@ extern __iomem void *ltq_cgu_membase;
 #define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
 #define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
 
-/* allow booting xrx200 phys */
-int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
-
 /* request a non-gpio and set the PIO config */
 #define PMU_PPE			 BIT(13)
 extern void ltq_pmu_enable(unsigned int module);

arch/mips/include/asm/mach-ralink/mt7620.h

@@ -11,7 +11,8 @@
 #ifndef _MT7620_REGS_H_
 #define _MT7620_REGS_H_
 
-#define MT7620_SYSC_BASE		0x10000000
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+#define MT7620_SYSC_BASE		IOMEM(0x10000000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04

arch/mips/include/asm/mach-ralink/rt288x.h

@@ -11,7 +11,8 @@
 #ifndef _RT288X_REGS_H_
 #define _RT288X_REGS_H_
 
-#define RT2880_SYSC_BASE		0x00300000
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+#define RT2880_SYSC_BASE		IOMEM(0x00300000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04

arch/mips/include/asm/mach-ralink/rt305x.h

@@ -43,7 +43,8 @@ static inline int soc_is_rt5350(void)
 	return ralink_soc == RT305X_SOC_RT5350;
 }
 
-#define RT305X_SYSC_BASE		0x10000000
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+#define RT305X_SYSC_BASE		IOMEM(0x10000000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04

arch/mips/include/asm/mach-ralink/rt3883.h

@@ -10,8 +10,10 @@
 
 #include <linux/bitops.h>
 
+#define IOMEM(x)		((void __iomem *)(KSEG1ADDR(x)))
+
 #define RT3883_SDRAM_BASE	0x00000000
-#define RT3883_SYSC_BASE	0x10000000
+#define RT3883_SYSC_BASE	IOMEM(0x10000000)
 #define RT3883_TIMER_BASE	0x10000100
 #define RT3883_INTC_BASE	0x10000200
 #define RT3883_MEMC_BASE	0x10000300

arch/mips/include/asm/pgtable-bits.h

@@ -280,6 +280,7 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
 #define __WRITEABLE	(_PAGE_SILENT_WRITE | _PAGE_WRITE | _PAGE_MODIFIED)
 
 #define _PAGE_CHG_MASK	(_PAGE_ACCESSED | _PAGE_MODIFIED |	\
-			 _PAGE_SOFT_DIRTY | _PFN_MASK | _CACHE_MASK)
+			 _PAGE_SOFT_DIRTY | _PFN_MASK |   \
+			 _CACHE_MASK | _PAGE_SPECIAL)
 
 #endif /* _ASM_PGTABLE_BITS_H */

arch/mips/include/asm/processor.h

@@ -202,11 +202,13 @@ struct octeon_cop2_state {
 #define COP2_INIT						\
 	.cp2			= {0,},
 
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+	CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 struct octeon_cvmseg_state {
 	unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE]
 			    [cpu_dcache_line_size() / sizeof(unsigned long)];
 };
-
+#endif
 #else
 #define COP2_INIT
 #endif
@@ -263,7 +265,10 @@ struct thread_struct {
 	unsigned long trap_nr;
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128)));
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+	CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128)));
+#endif
 #endif
 	struct mips_abi *abi;
 };

arch/mips/include/asm/rtlx.h

@@ -81,7 +81,6 @@ struct rtlx_channel {
 extern struct rtlx_info {
 	unsigned long id;
 	enum rtlx_state state;
-	int ap_int_pending;	/* Status of 0 or 1 for CONFIG_MIPS_CMP only */
 
 	struct rtlx_channel channel[RTLX_CHANNELS];
 } *rtlx;

arch/mips/include/asm/sibyte/board.h

@@ -7,7 +7,7 @@
 #define _SIBYTE_BOARD_H
 
 #if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \
-    defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR)
+    defined(CONFIG_SIBYTE_LITTLESUR)
 #include <asm/sibyte/swarm.h>
 #endif
 
@@ -15,10 +15,6 @@
 #include <asm/sibyte/sentosa.h>
 #endif
 
-#ifdef CONFIG_SIBYTE_CARMEL
-#include <asm/sibyte/carmel.h>
-#endif
-
 #ifdef CONFIG_SIBYTE_BIGSUR
 #include <asm/sibyte/bigsur.h>
 #endif

arch/mips/include/asm/sibyte/carmel.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2002 Broadcom Corporation
- */
-#ifndef __ASM_SIBYTE_CARMEL_H
-#define __ASM_SIBYTE_CARMEL_H
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_int.h>
-
-#define SIBYTE_BOARD_NAME "Carmel"
-
-#define GPIO_PHY_INTERRUPT	2
-#define GPIO_NONMASKABLE_INT	3
-#define GPIO_CF_INSERTED	6
-#define GPIO_MONTEREY_RESET	7
-#define GPIO_QUADUART_INT	8
-#define GPIO_CF_INT		9
-#define GPIO_FPGA_CCLK		10
-#define GPIO_FPGA_DOUT		11
-#define GPIO_FPGA_DIN		12
-#define GPIO_FPGA_PGM		13
-#define GPIO_FPGA_DONE		14
-#define GPIO_FPGA_INIT		15
-
-#define LEDS_CS			2
-#define LEDS_PHYS		0x100C0000
-#define MLEDS_CS		3
-#define MLEDS_PHYS		0x100A0000
-#define UART_CS			4
-#define UART_PHYS		0x100D0000
-#define ARAVALI_CS		5
-#define ARAVALI_PHYS		0x11000000
-#define IDE_CS			6
-#define IDE_PHYS		0x100B0000
-#define ARAVALI2_CS		7
-#define ARAVALI2_PHYS		0x100E0000
-
-#if defined(CONFIG_SIBYTE_CARMEL)
-#define K_GPIO_GB_IDE	9
-#define K_INT_GB_IDE	(K_INT_GPIO_0 + K_GPIO_GB_IDE)
-#endif
-
-
-#endif /* __ASM_SIBYTE_CARMEL_H */

arch/mips/include/asm/sibyte/swarm.h

@@ -24,11 +24,6 @@
 #define SIBYTE_HAVE_PCMCIA 0
 #define SIBYTE_HAVE_IDE	   0
 #endif
-#ifdef CONFIG_SIBYTE_CRHINE
-#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
-#define SIBYTE_HAVE_PCMCIA 0
-#define SIBYTE_HAVE_IDE	   0
-#endif
 
 /* Generic bus chip selects */
 #define LEDS_CS		3

arch/mips/include/asm/smp-ops.h

@@ -80,22 +80,6 @@ static inline int register_up_smp_ops(void)
 #endif
 }
 
-static inline int register_cmp_smp_ops(void)
-{
-#ifdef CONFIG_MIPS_CMP
-	extern const struct plat_smp_ops cmp_smp_ops;
-
-	if (!mips_cm_present())
-		return -ENODEV;
-
-	register_smp_ops(&cmp_smp_ops);
-
-	return 0;
-#else
-	return -ENODEV;
-#endif
-}
-
 static inline int register_vsmp_smp_ops(void)
 {
 #ifdef CONFIG_MIPS_MT_SMP

arch/mips/include/asm/vpe.h

@@ -29,12 +29,8 @@
 
 static inline int aprp_cpu_index(void)
 {
-#ifdef CONFIG_MIPS_CMP
-	return setup_max_cpus;
-#else
 	extern int tclimit;
 	return tclimit;
-#endif
 }
 
 enum vpe_state {

arch/mips/kernel/Makefile

@@ -58,16 +58,13 @@ obj-$(CONFIG_CPU_BMIPS)		+= smp-bmips.o bmips_vec.o bmips_5xxx_init.o
 obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
 obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
-obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
 obj-$(CONFIG_MIPS_CPS_NS16550)	+= cps-vec-ns16550.o
 obj-$(CONFIG_MIPS_SPRAM)	+= spram.o
 
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
-obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o
 obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o
 obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
-obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
 obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
 
 obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o

arch/mips/kernel/asm-offsets.c

@@ -306,7 +306,10 @@ void output_octeon_cop2_state_defines(void)
 	OFFSET(OCTEON_CP2_HSH_IVW,	octeon_cop2_state, cop2_hsh_ivw);
 	OFFSET(OCTEON_CP2_SHA3,		octeon_cop2_state, cop2_sha3);
 	OFFSET(THREAD_CP2,	task_struct, thread.cp2);
+#if defined(CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE) && \
+    CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	OFFSET(THREAD_CVMSEG,	task_struct, thread.cvmseg.cvmseg);
+#endif
 	BLANK();
 }
 #endif

arch/mips/kernel/cps-vec.S

@@ -116,6 +116,8 @@ not_nmi:
 	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
 	mtc0	t0, CP0_STATUS
 
+	/* We don't know how to do coherence setup on earlier ISA */
+#if MIPS_ISA_REV > 0
 	/* Skip cache & coherence setup if we're already coherent */
 	lw	s7, GCR_CL_COHERENCE_OFS(s1)
 	bnez	s7, 1f
@@ -129,6 +131,7 @@ not_nmi:
 	li	t0, 0xff
 	sw	t0, GCR_CL_COHERENCE_OFS(s1)
 	ehb
+#endif /* MIPS_ISA_REV > 0 */
 
 	/* Set Kseg0 CCA to that in s0 */
 1:	mfc0	t0, CP0_CONFIG
@@ -515,6 +518,7 @@ LEAF(mips_cps_boot_vpes)
 	 nop
 	END(mips_cps_boot_vpes)
 
+#if MIPS_ISA_REV > 0
 LEAF(mips_cps_cache_init)
 	/*
 	 * Clear the bits used to index the caches. Note that the architecture
@@ -588,6 +592,7 @@ dcache_done:
 	jr	ra
 	 nop
 	END(mips_cps_cache_init)
+#endif /* MIPS_ISA_REV > 0 */
 
 #if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM)
 

arch/mips/kernel/cpu-probe.c

@@ -1602,6 +1602,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
+	/* Octeon has different cache interface */
+	c->options &= ~MIPS_CPU_4K_CACHE;
 	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_CAVIUM_CN38XX:
 	case PRID_IMP_CAVIUM_CN31XX:

arch/mips/kernel/mips-cm.c

@@ -181,11 +181,16 @@ static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
 
 phys_addr_t __mips_cm_phys_base(void)
 {
-	u32 config3 = read_c0_config3();
 	unsigned long cmgcr;
 
 	/* Check the CMGCRBase register is implemented */
-	if (!(config3 & MIPS_CONF3_CMGCR))
+	if (!(read_c0_config() & MIPS_CONF_M))
+		return 0;
+
+	if (!(read_c0_config2() & MIPS_CONF_M))
+		return 0;
+
+	if (!(read_c0_config3() & MIPS_CONF3_CMGCR))
 		return 0;
 
 	/* Read the address from CMGCRBase */

arch/mips/kernel/octeon_switch.S

@@ -428,7 +428,6 @@ done_restore:
 	jr	ra
 	 nop
 	.space 30 * 4, 0
-octeon_mult_save_end:
 	EXPORT(octeon_mult_save_end)
 	END(octeon_mult_save)
 
@@ -448,7 +447,6 @@ octeon_mult_save_end:
 	sd	k0, PT_MPL+8(sp)      /* PT_MPL+8  has MPL1 */
 	jr	ra
 	 sd	k1, PT_MPL+16(sp)     /* PT_MPL+16 has MPL2 */
-octeon_mult_save2_end:
 	EXPORT(octeon_mult_save2_end)
 	END(octeon_mult_save2)
 
@@ -480,7 +478,6 @@ octeon_mult_save2_end:
 	sd	$10, PT_MPL+(4*8)(sp)	/* store MPL4 */
 	jr	ra
 	 sd	$11, PT_MPL+(5*8)(sp)	/* store MPL5 */
-octeon_mult_save3_end:
 	EXPORT(octeon_mult_save3_end)
 	END(octeon_mult_save3)
 	.set pop
@@ -498,7 +495,6 @@ octeon_mult_save3_end:
 	jr	ra
 	 nop
 	.space 30 * 4, 0
-octeon_mult_restore_end:
 	EXPORT(octeon_mult_restore_end)
 	END(octeon_mult_restore)
 
@@ -517,7 +513,6 @@ octeon_mult_restore_end:
 	mtp1	v0			/* P1 */
 	jr	ra
 	 mtp0	v1			/* P0 */
-octeon_mult_restore2_end:
 	EXPORT(octeon_mult_restore2_end)
 	END(octeon_mult_restore2)
 
@@ -548,7 +543,6 @@ octeon_mult_restore2_end:
 	.word	0x714b000b
 	/* mtp2	$10, $11		   restore P2 and P5 */
 
-octeon_mult_restore3_end:
 	EXPORT(octeon_mult_restore3_end)
 	END(octeon_mult_restore3)
 	.set pop

arch/mips/kernel/rtlx-cmp.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include <linux/wait.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-
-#include <asm/mips_mt.h>
-#include <asm/vpe.h>
-#include <asm/rtlx.h>
-
-static int major;
-
-static void rtlx_interrupt(void)
-{
-	int i;
-	struct rtlx_info *info;
-	struct rtlx_info **p = vpe_get_shared(aprp_cpu_index());
-
-	if (p == NULL || *p == NULL)
-		return;
-
-	info = *p;
-
-	if (info->ap_int_pending == 1 && smp_processor_id() == 0) {
-		for (i = 0; i < RTLX_CHANNELS; i++) {
-			wake_up(&channel_wqs[i].lx_queue);
-			wake_up(&channel_wqs[i].rt_queue);
-		}
-		info->ap_int_pending = 0;
-	}
-}
-
-void _interrupt_sp(void)
-{
-	smp_send_reschedule(aprp_cpu_index());
-}
-
-int __init rtlx_module_init(void)
-{
-	struct device *dev;
-	int i, err;
-
-	if (!cpu_has_mipsmt) {
-		pr_warn("VPE loader: not a MIPS MT capable processor\n");
-		return -ENODEV;
-	}
-
-	if (num_possible_cpus() - aprp_cpu_index() < 1) {
-		pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"
-			"Pass maxcpus=<n> argument as kernel argument\n");
-
-		return -ENODEV;
-	}
-
-	major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops);
-	if (major < 0) {
-		pr_err("rtlx_module_init: unable to register device\n");
-		return major;
-	}
-
-	/* initialise the wait queues */
-	for (i = 0; i < RTLX_CHANNELS; i++) {
-		init_waitqueue_head(&channel_wqs[i].rt_queue);
-		init_waitqueue_head(&channel_wqs[i].lx_queue);
-		atomic_set(&channel_wqs[i].in_open, 0);
-		mutex_init(&channel_wqs[i].mutex);
-
-		dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
-				    "%s%d", RTLX_MODULE_NAME, i);
-		if (IS_ERR(dev)) {
-			while (i--)
-				device_destroy(mt_class, MKDEV(major, i));
-
-			err = PTR_ERR(dev);
-			goto out_chrdev;
-		}
-	}
-
-	/* set up notifiers */
-	rtlx_notify.start = rtlx_starting;
-	rtlx_notify.stop = rtlx_stopping;
-	vpe_notify(aprp_cpu_index(), &rtlx_notify);
-
-	if (cpu_has_vint) {
-		aprp_hook = rtlx_interrupt;
-	} else {
-		pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
-		err = -ENODEV;
-		goto out_class;
-	}
-
-	return 0;
-
-out_class:
-	for (i = 0; i < RTLX_CHANNELS; i++)
-		device_destroy(mt_class, MKDEV(major, i));
-out_chrdev:
-	unregister_chrdev(major, RTLX_MODULE_NAME);
-
-	return err;
-}
-
-void __exit rtlx_module_exit(void)
-{
-	int i;
-
-	for (i = 0; i < RTLX_CHANNELS; i++)
-		device_destroy(mt_class, MKDEV(major, i));
-
-	unregister_chrdev(major, RTLX_MODULE_NAME);
-
-	aprp_hook = NULL;
-}

arch/mips/kernel/setup.c

@@ -786,7 +786,8 @@ void __init setup_arch(char **cmdline_p)
 	setup_early_printk();
 #endif
 	cpu_report();
-	check_bugs_early();
+	if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64))
+		check_bugs64_early();
 
 #if defined(CONFIG_VT)
 #if defined(CONFIG_VGA_CONSOLE)

arch/mips/kernel/smp-cmp.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.
- *    Chris Dearman (chris@mips.com)
- */
-
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/sched/task_stack.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <asm/hardirq.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips_mt.h>
-#include <asm/amon.h>
-
-static void cmp_init_secondary(void)
-{
-	struct cpuinfo_mips *c __maybe_unused = &current_cpu_data;
-
-	/* Assume GIC is present */
-	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
-				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
-
-	/* Enable per-cpu interrupts: platform specific */
-
-#ifdef CONFIG_MIPS_MT_SMP
-	if (cpu_has_mipsmt)
-		cpu_set_vpe_id(c, (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
-				  TCBIND_CURVPE);
-#endif
-}
-
-static void cmp_smp_finish(void)
-{
-	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
-	/* CDFIXME: remove this? */
-	write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ));
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* If we have an FPU, enroll ourselves in the FPU-full mask */
-	if (cpu_has_fpu)
-		cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
-	local_irq_enable();
-}
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it running
- * smp_bootstrap is the place to resume from
- * __KSTK_TOS(idle) is apparently the stack pointer
- * (unsigned long)idle->thread_info the gp
- */
-static int cmp_boot_secondary(int cpu, struct task_struct *idle)
-{
-	struct thread_info *gp = task_thread_info(idle);
-	unsigned long sp = __KSTK_TOS(idle);
-	unsigned long pc = (unsigned long)&smp_bootstrap;
-	unsigned long a0 = 0;
-
-	pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(),
-		__func__, cpu);
-
-#if 0
-	/* Needed? */
-	flush_icache_range((unsigned long)gp,
-			   (unsigned long)(gp + sizeof(struct thread_info)));
-#endif
-
-	amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
-	return 0;
-}
-
-/*
- * Common setup before any secondaries are started
- */
-void __init cmp_smp_setup(void)
-{
-	int i;
-	int ncpu = 0;
-
-	pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__);
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* If we have an FPU, enroll ourselves in the FPU-full mask */
-	if (cpu_has_fpu)
-		cpumask_set_cpu(0, &mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
-	for (i = 1; i < NR_CPUS; i++) {
-		if (amon_cpu_avail(i)) {
-			set_cpu_possible(i, true);
-			__cpu_number_map[i]	= ++ncpu;
-			__cpu_logical_map[ncpu] = i;
-		}
-	}
-
-	if (cpu_has_mipsmt) {
-		unsigned int nvpe = 1;
-#ifdef CONFIG_MIPS_MT_SMP
-		unsigned int mvpconf0 = read_c0_mvpconf0();
-
-		nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-#endif
-		smp_num_siblings = nvpe;
-	}
-	pr_info("Detected %i available secondary CPU(s)\n", ncpu);
-}
-
-void __init cmp_prepare_cpus(unsigned int max_cpus)
-{
-	pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n",
-		 smp_processor_id(), __func__, max_cpus);
-
-#ifdef CONFIG_MIPS_MT
-	/*
-	 * FIXME: some of these options are per-system, some per-core and
-	 * some per-cpu
-	 */
-	mips_mt_set_cpuoptions();
-#endif
-
-}
-
-const struct plat_smp_ops cmp_smp_ops = {
-	.send_ipi_single	= mips_smp_send_ipi_single,
-	.send_ipi_mask		= mips_smp_send_ipi_mask,
-	.init_secondary		= cmp_init_secondary,
-	.smp_finish		= cmp_smp_finish,
-	.boot_secondary		= cmp_boot_secondary,
-	.smp_setup		= cmp_smp_setup,
-	.prepare_cpus		= cmp_prepare_cpus,
-};

arch/mips/kernel/smp-cps.c

@@ -361,6 +361,8 @@ static int cps_boot_secondary(int cpu, struct task_struct *idle)
 
 static void cps_init_secondary(void)
 {
+	int core = cpu_core(&current_cpu_data);
+
 	/* Disable MT - we only want to run 1 TC per VPE */
 	if (cpu_has_mipsmt)
 		dmt();
@@ -376,6 +378,9 @@ static void cps_init_secondary(void)
 		BUG_ON(ident != mips_cm_vp_id(smp_processor_id()));
 	}
 
+	if (core > 0 && !read_gcr_cl_coherence())
+		pr_warn("Core %u is not in coherent domain\n", core);
+
 	if (cpu_has_veic)
 		clear_c0_status(ST0_IM);
 	else

arch/mips/kernel/uprobes.c

@@ -191,6 +191,7 @@ void arch_uprobe_abort_xol(struct arch_uprobe *aup,
 {
 	struct uprobe_task *utask = current->utask;
 
+	current->thread.trap_nr = utask->autask.saved_trap_nr;
 	instruction_pointer_set(regs, utask->vaddr);
 }
 
@@ -207,24 +208,6 @@ unsigned long arch_uretprobe_hijack_return_addr(
 	return ra;
 }
 
-/**
- * set_swbp - store breakpoint at a given address.
- * @auprobe: arch specific probepoint information.
- * @mm: the probed process address space.
- * @vaddr: the virtual address to insert the opcode.
- *
- * For mm @mm, store the breakpoint instruction at @vaddr.
- * Return 0 (success) or a negative errno.
- *
- * This version overrides the weak version in kernel/events/uprobes.c.
- * It is required to handle MIPS16 and microMIPS.
- */
-int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
-	unsigned long vaddr)
-{
-	return uprobe_write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN);
-}
-
 void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
 				  void *src, unsigned long len)
 {

arch/mips/kernel/vpe-cmp.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- */
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-#include <asm/vpe.h>
-
-static int major;
-
-void cleanup_tc(struct tc *tc)
-{
-
-}
-
-static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t len)
-{
-	struct vpe *vpe = get_vpe(aprp_cpu_index());
-	struct vpe_notifications *notifier;
-
-	list_for_each_entry(notifier, &vpe->notify, list)
-		notifier->stop(aprp_cpu_index());
-
-	release_progmem(vpe->load_addr);
-	vpe->state = VPE_STATE_UNUSED;
-
-	return len;
-}
-static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
-
-static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
-			 char *buf)
-{
-	struct vpe *vpe = get_vpe(aprp_cpu_index());
-
-	return sprintf(buf, "%d\n", vpe->ntcs);
-}
-
-static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
-			  const char *buf, size_t len)
-{
-	struct vpe *vpe = get_vpe(aprp_cpu_index());
-	unsigned long new;
-	int ret;
-
-	ret = kstrtoul(buf, 0, &new);
-	if (ret < 0)
-		return ret;
-
-	/* APRP can only reserve one TC in a VPE and no more. */
-	if (new != 1)
-		return -EINVAL;
-
-	vpe->ntcs = new;
-
-	return len;
-}
-static DEVICE_ATTR_RW(ntcs);
-
-static struct attribute *vpe_attrs[] = {
-	&dev_attr_kill.attr,
-	&dev_attr_ntcs.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(vpe);
-
-static void vpe_device_release(struct device *cd)
-{
-}
-
-static struct class vpe_class = {
-	.name = "vpe",
-	.dev_release = vpe_device_release,
-	.dev_groups = vpe_groups,
-};
-
-static struct device vpe_device;
-
-int __init vpe_module_init(void)
-{
-	struct vpe *v = NULL;
-	struct tc *t;
-	int err;
-
-	if (!cpu_has_mipsmt) {
-		pr_warn("VPE loader: not a MIPS MT capable processor\n");
-		return -ENODEV;
-	}
-
-	if (num_possible_cpus() - aprp_cpu_index() < 1) {
-		pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"
-			"Pass maxcpus=<n> argument as kernel argument\n");
-		return -ENODEV;
-	}
-
-	major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops);
-	if (major < 0) {
-		pr_warn("VPE loader: unable to register character device\n");
-		return major;
-	}
-
-	err = class_register(&vpe_class);
-	if (err) {
-		pr_err("vpe_class registration failed\n");
-		goto out_chrdev;
-	}
-
-	device_initialize(&vpe_device);
-	vpe_device.class	= &vpe_class;
-	vpe_device.parent	= NULL;
-	dev_set_name(&vpe_device, "vpe_sp");
-	vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR);
-	err = device_add(&vpe_device);
-	if (err) {
-		pr_err("Adding vpe_device failed\n");
-		goto out_class;
-	}
-
-	t = alloc_tc(aprp_cpu_index());
-	if (!t) {
-		pr_warn("VPE: unable to allocate TC\n");
-		err = -ENOMEM;
-		goto out_dev;
-	}
-
-	/* VPE */
-	v = alloc_vpe(aprp_cpu_index());
-	if (v == NULL) {
-		pr_warn("VPE: unable to allocate VPE\n");
-		kfree(t);
-		err = -ENOMEM;
-		goto out_dev;
-	}
-
-	v->ntcs = 1;
-
-	/* add the tc to the list of this vpe's tc's. */
-	list_add(&t->tc, &v->tc);
-
-	/* TC */
-	t->pvpe = v;	/* set the parent vpe */
-
-	return 0;
-
-out_dev:
-	device_del(&vpe_device);
-
-out_class:
-	put_device(&vpe_device);
-	class_unregister(&vpe_class);
-
-out_chrdev:
-	unregister_chrdev(major, VPE_MODULE_NAME);
-
-	return err;
-}
-
-void __exit vpe_module_exit(void)
-{
-	struct vpe *v, *n;
-
-	device_unregister(&vpe_device);
-	class_unregister(&vpe_class);
-	unregister_chrdev(major, VPE_MODULE_NAME);
-
-	/* No locking needed here */
-	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list)
-		if (v->state != VPE_STATE_UNUSED)
-			release_vpe(v);
-}

arch/mips/kernel/vpe.c

@@ -794,7 +794,7 @@ static int vpe_open(struct inode *inode, struct file *filp)
 
 static int vpe_release(struct inode *inode, struct file *filp)
 {
-#if defined(CONFIG_MIPS_VPE_LOADER_MT) || defined(CONFIG_MIPS_VPE_LOADER_CMP)
+#ifdef CONFIG_MIPS_VPE_LOADER_MT
 	struct vpe *v;
 	Elf_Ehdr *hdr;
 	int ret = 0;

arch/mips/loongson2ef/Kconfig

@@ -7,6 +7,7 @@ choice
 config LEMOTE_FULOONG2E
 	bool "Lemote Fuloong(2e) mini-PC"
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select CEVT_R4K
@@ -36,6 +37,7 @@ config LEMOTE_FULOONG2E
 config LEMOTE_MACH2F
 	bool "Lemote Loongson 2F family machines"
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select BOARD_SCACHE
@@ -46,6 +48,7 @@ config LEMOTE_MACH2F
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select GPIOLIB
 	select FORCE_PCI
 	select I8259
 	select IRQ_MIPS_CPU

arch/mips/loongson2ef/Platform

@@ -2,41 +2,6 @@
 # Loongson Processors' Support
 #
 
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e
-cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f
-#
-# Some versions of binutils, not currently mainline as of 2019/02/04, support
-# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
-# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
-# description).
-#
-# We disable this in order to prevent the assembler meddling with the
-# instruction that labels refer to, ie. if we label an ll instruction:
-#
-# 1: ll v0, 0(a0)
-#
-# ...then with the assembler fix applied the label may actually point at a sync
-# instruction inserted by the assembler, and if we were using the label in an
-# exception table the table would no longer contain the address of the ll
-# instruction.
-#
-# Avoid this by explicitly disabling that assembler behaviour. If upstream
-# binutils does not merge support for the flag then we can revisit & remove
-# this later - for now it ensures vendor toolchains don't cause problems.
-#
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
-
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
-cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
 #
 # Loongson Machines' Support
 #

arch/mips/loongson2ef/common/cs5536/cs5536_isa.c

@@ -213,7 +213,7 @@ void pci_isa_write_reg(int reg, u32 value)
 			lo |= 0x00000063;
 			_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
 		}
-
+		break;
 	default:
 		/* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
 		break;

arch/mips/loongson64/Platform

-#
-# Loongson Processors' Support
-#
-
-
-cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
-
-ifdef CONFIG_CPU_LOONGSON64
-cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
-cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
 #
 # Loongson Machines' Support
 #

arch/mips/loongson64/setup.c

@@ -6,7 +6,6 @@
 #include <linux/export.h>
 #include <linux/init.h>
 
-#include <asm/wbflush.h>
 #include <asm/bootinfo.h>
 #include <linux/libfdt.h>
 #include <linux/of_fdt.h>
@@ -17,20 +16,6 @@
 
 void *loongson_fdt_blob;
 
-static void wbflush_loongson(void)
-{
-	asm(".set\tpush\n\t"
-	    ".set\tnoreorder\n\t"
-	    ".set mips3\n\t"
-	    "sync\n\t"
-	    "nop\n\t"
-	    ".set\tpop\n\t"
-	    ".set mips0\n\t");
-}
-
-void (*__wbflush)(void) = wbflush_loongson;
-EXPORT_SYMBOL(__wbflush);
-
 void __init plat_mem_setup(void)
 {
 	if (loongson_fdt_blob)

arch/mips/loongson64/smp.c

@@ -27,30 +27,13 @@ DEFINE_PER_CPU(int, cpu_state);
 
 #define LS_IPI_IRQ (MIPS_CPU_IRQ_BASE + 6)
 
-static void *ipi_set0_regs[16];
-static void *ipi_clear0_regs[16];
-static void *ipi_status0_regs[16];
-static void *ipi_en0_regs[16];
-static void *ipi_mailbox_buf[16];
+static void __iomem *ipi_set0_regs[16];
+static void __iomem *ipi_clear0_regs[16];
+static void __iomem *ipi_status0_regs[16];
+static void __iomem *ipi_en0_regs[16];
+static void __iomem *ipi_mailbox_buf[16];
 static uint32_t core0_c0count[NR_CPUS];
 
-/* read a 32bit value from ipi register */
-#define loongson3_ipi_read32(addr) readl(addr)
-/* read a 64bit value from ipi register */
-#define loongson3_ipi_read64(addr) readq(addr)
-/* write a 32bit value to ipi register */
-#define loongson3_ipi_write32(action, addr)	\
-	do {					\
-		writel(action, addr);		\
-		__wbflush();			\
-	} while (0)
-/* write a 64bit value to ipi register */
-#define loongson3_ipi_write64(action, addr)	\
-	do {					\
-		writeq(action, addr);		\
-		__wbflush();			\
-	} while (0)
-
 static u32 (*ipi_read_clear)(int cpu);
 static void (*ipi_write_action)(int cpu, u32 action);
 static void (*ipi_write_enable)(int cpu);
@@ -136,26 +119,28 @@ static u32 legacy_ipi_read_clear(int cpu)
 	u32 action;
 
 	/* Load the ipi register to figure out what we're supposed to do */
-	action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]);
+	action = readl_relaxed(ipi_status0_regs[cpu_logical_map(cpu)]);
 	/* Clear the ipi register to clear the interrupt */
-	loongson3_ipi_write32(action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+	writel_relaxed(action, ipi_clear0_regs[cpu_logical_map(cpu)]);
+	nudge_writes();
 
 	return action;
 }
 
 static void legacy_ipi_write_action(int cpu, u32 action)
 {
-	loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]);
+	writel_relaxed((u32)action, ipi_set0_regs[cpu]);
+	nudge_writes();
 }
 
 static void legacy_ipi_write_enable(int cpu)
 {
-	loongson3_ipi_write32(0xffffffff, ipi_en0_regs[cpu_logical_map(cpu)]);
+	writel_relaxed(0xffffffff, ipi_en0_regs[cpu_logical_map(cpu)]);
 }
 
 static void legacy_ipi_clear_buf(int cpu)
 {
-	loongson3_ipi_write64(0, ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+	writeq_relaxed(0, ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
 }
 
 static void legacy_ipi_write_buf(int cpu, struct task_struct *idle)
@@ -171,14 +156,15 @@ static void legacy_ipi_write_buf(int cpu, struct task_struct *idle)
 	pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
 			cpu, startargs[0], startargs[1], startargs[2]);
 
-	loongson3_ipi_write64(startargs[3],
+	writeq_relaxed(startargs[3],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x18);
-	loongson3_ipi_write64(startargs[2],
+	writeq_relaxed(startargs[2],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x10);
-	loongson3_ipi_write64(startargs[1],
+	writeq_relaxed(startargs[1],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x8);
-	loongson3_ipi_write64(startargs[0],
+	writeq_relaxed(startargs[0],
 			ipi_mailbox_buf[cpu_logical_map(cpu)] + 0x0);
+	nudge_writes();
 }
 
 static void csr_ipi_probe(void)
@@ -418,7 +404,7 @@ static irqreturn_t loongson3_ipi_interrupt(int irq, void *dev_id)
 		c0count = c0count ? c0count : 1;
 		for (i = 1; i < nr_cpu_ids; i++)
 			core0_c0count[i] = c0count;
-		__wbflush(); /* Let others see the result ASAP */
+		nudge_writes(); /* Let others see the result ASAP */
 	}
 
 	return IRQ_HANDLED;

arch/mips/mm/c-octeon.c

@@ -83,8 +83,13 @@ static void octeon_flush_icache_all_cores(struct vm_area_struct *vma)
 	else
 		mask = *cpu_online_mask;
 	cpumask_clear_cpu(cpu, &mask);
+#ifdef CONFIG_CAVIUM_OCTEON_SOC
 	for_each_cpu(cpu, &mask)
 		octeon_send_ipi_single(cpu, SMP_ICACHE_FLUSH);
+#else
+	smp_call_function_many(&mask, (smp_call_func_t)octeon_local_flush_icache,
+			       NULL, 1);
+#endif
 
 	preempt_enable();
 #endif

arch/mips/mm/c-r3k.c

@@ -261,10 +261,6 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma,
 		r3k_flush_icache_range(kaddr, kaddr + PAGE_SIZE);
 }
 
-static void local_r3k_flush_data_cache_page(void *addr)
-{
-}
-
 static void r3k_flush_data_cache_page(unsigned long addr)
 {
 }
@@ -302,7 +298,6 @@ void r3k_cache_init(void)
 
 	__flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
 
-	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
 	flush_data_cache_page = r3k_flush_data_cache_page;
 
 	_dma_cache_wback_inv = r3k_dma_cache_wback_inv;

arch/mips/mm/c-r4k.c

@@ -110,20 +110,6 @@ static unsigned long dcache_size __read_mostly;
 static unsigned long vcache_size __read_mostly;
 static unsigned long scache_size __read_mostly;
 
-/*
- * Dummy cache handling routines for machines without boardcaches
- */
-static void cache_noop(void) {}
-
-static struct bcache_ops no_sc_ops = {
-	.bc_enable = (void *)cache_noop,
-	.bc_disable = (void *)cache_noop,
-	.bc_wback_inv = (void *)cache_noop,
-	.bc_inv = (void *)cache_noop
-};
-
-struct bcache_ops *bcops = &no_sc_ops;
-
 #define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
 #define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
 
@@ -201,24 +187,6 @@ static void r4k_blast_dcache_user_page_setup(void)
 
 #endif
 
-static void (* r4k_blast_dcache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_dcache_page_indexed_setup(void)
-{
-	unsigned long dc_lsize = cpu_dcache_line_size();
-
-	if (dc_lsize == 0)
-		r4k_blast_dcache_page_indexed = (void *)cache_noop;
-	else if (dc_lsize == 16)
-		r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
-	else if (dc_lsize == 32)
-		r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
-	else if (dc_lsize == 64)
-		r4k_blast_dcache_page_indexed = blast_dcache64_page_indexed;
-	else if (dc_lsize == 128)
-		r4k_blast_dcache_page_indexed = blast_dcache128_page_indexed;
-}
-
 void (* r4k_blast_dcache)(void);
 EXPORT_SYMBOL(r4k_blast_dcache);
 
@@ -280,39 +248,6 @@ static inline void tx49_blast_icache32(void)
 				     addr | ws, 32);
 }
 
-static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	blast_icache32_page_indexed(page);
-	local_irq_restore(flags);
-}
-
-static inline void tx49_blast_icache32_page_indexed(unsigned long page)
-{
-	unsigned long indexmask = current_cpu_data.icache.waysize - 1;
-	unsigned long start = INDEX_BASE + (page & indexmask);
-	unsigned long end = start + PAGE_SIZE;
-	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
-	unsigned long ws_end = current_cpu_data.icache.ways <<
-			       current_cpu_data.icache.waybit;
-	unsigned long ws, addr;
-
-	CACHE32_UNROLL32_ALIGN2;
-	/* I'm in even chunk.  blast odd chunks */
-	for (ws = 0; ws < ws_end; ws += ws_inc)
-		for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
-			cache_unroll(32, kernel_cache, Index_Invalidate_I,
-				     addr | ws, 32);
-	CACHE32_UNROLL32_ALIGN;
-	/* I'm in odd chunk.  blast even chunks */
-	for (ws = 0; ws < ws_end; ws += ws_inc)
-		for (addr = start; addr < end; addr += 0x400 * 2)
-			cache_unroll(32, kernel_cache, Index_Invalidate_I,
-				     addr | ws, 32);
-}
-
 static void (* r4k_blast_icache_page)(unsigned long addr);
 
 static void r4k_blast_icache_page_setup(void)
@@ -355,34 +290,6 @@ static void r4k_blast_icache_user_page_setup(void)
 
 #endif
 
-static void (* r4k_blast_icache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_icache_page_indexed_setup(void)
-{
-	unsigned long ic_lsize = cpu_icache_line_size();
-
-	if (ic_lsize == 0)
-		r4k_blast_icache_page_indexed = (void *)cache_noop;
-	else if (ic_lsize == 16)
-		r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
-	else if (ic_lsize == 32) {
-		if (IS_ENABLED(CONFIG_WAR_R4600_V1_INDEX_ICACHEOP) &&
-		    cpu_is_r4600_v1_x())
-			r4k_blast_icache_page_indexed =
-				blast_icache32_r4600_v1_page_indexed;
-		else if (IS_ENABLED(CONFIG_WAR_TX49XX_ICACHE_INDEX_INV))
-			r4k_blast_icache_page_indexed =
-				tx49_blast_icache32_page_indexed;
-		else if (current_cpu_type() == CPU_LOONGSON2EF)
-			r4k_blast_icache_page_indexed =
-				loongson2_blast_icache32_page_indexed;
-		else
-			r4k_blast_icache_page_indexed =
-				blast_icache32_page_indexed;
-	} else if (ic_lsize == 64)
-		r4k_blast_icache_page_indexed = blast_icache64_page_indexed;
-}
-
 void (* r4k_blast_icache)(void);
 EXPORT_SYMBOL(r4k_blast_icache);
 
@@ -428,24 +335,6 @@ static void r4k_blast_scache_page_setup(void)
 		r4k_blast_scache_page = blast_scache128_page;
 }
 
-static void (* r4k_blast_scache_page_indexed)(unsigned long addr);
-
-static void r4k_blast_scache_page_indexed_setup(void)
-{
-	unsigned long sc_lsize = cpu_scache_line_size();
-
-	if (scache_size == 0)
-		r4k_blast_scache_page_indexed = (void *)cache_noop;
-	else if (sc_lsize == 16)
-		r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
-	else if (sc_lsize == 32)
-		r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
-	else if (sc_lsize == 64)
-		r4k_blast_scache_page_indexed = blast_scache64_page_indexed;
-	else if (sc_lsize == 128)
-		r4k_blast_scache_page_indexed = blast_scache128_page_indexed;
-}
-
 static void (* r4k_blast_scache)(void);
 
 static void r4k_blast_scache_setup(void)
@@ -1821,13 +1710,10 @@ void r4k_cache_init(void)
 	setup_scache();
 
 	r4k_blast_dcache_page_setup();
-	r4k_blast_dcache_page_indexed_setup();
 	r4k_blast_dcache_setup();
 	r4k_blast_icache_page_setup();
-	r4k_blast_icache_page_indexed_setup();
 	r4k_blast_icache_setup();
 	r4k_blast_scache_page_setup();
-	r4k_blast_scache_page_indexed_setup();
 	r4k_blast_scache_setup();
 	r4k_blast_scache_node_setup();
 #ifdef CONFIG_EVA
@@ -1859,7 +1745,6 @@ void r4k_cache_init(void)
 	__flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
 
 	flush_icache_all	= r4k_flush_icache_all;
-	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
 	local_flush_icache_range	= local_r4k_flush_icache_range;
@@ -1867,15 +1752,9 @@ void r4k_cache_init(void)
 	__local_flush_icache_user_range	= local_r4k_flush_icache_user_range;
 
 #ifdef CONFIG_DMA_NONCOHERENT
-	if (dma_default_coherent) {
-		_dma_cache_wback_inv	= (void *)cache_noop;
-		_dma_cache_wback	= (void *)cache_noop;
-		_dma_cache_inv		= (void *)cache_noop;
-	} else {
 	_dma_cache_wback_inv	= r4k_dma_cache_wback_inv;
 	_dma_cache_wback	= r4k_dma_cache_wback_inv;
 	_dma_cache_inv		= r4k_dma_cache_inv;
-	}
 #endif /* CONFIG_DMA_NONCOHERENT */
 
 	build_clear_page();
@@ -1908,7 +1787,6 @@ void r4k_cache_init(void)
 		/* I$ fills from D$ just by emptying the write buffers */
 		flush_cache_page = (void *)b5k_instruction_hazard;
 		flush_cache_range = (void *)b5k_instruction_hazard;
-		local_flush_data_cache_page = (void *)b5k_instruction_hazard;
 		flush_data_cache_page = (void *)b5k_instruction_hazard;
 		flush_icache_range = (void *)b5k_instruction_hazard;
 		local_flush_icache_range = (void *)b5k_instruction_hazard;
@@ -1928,7 +1806,6 @@ void r4k_cache_init(void)
 		flush_cache_range	= (void *)cache_noop;
 		flush_icache_all	= (void *)cache_noop;
 		flush_data_cache_page	= (void *)cache_noop;
-		local_flush_data_cache_page	= (void *)cache_noop;
 		break;
 	}
 }

arch/mips/mm/cache.c

@@ -17,6 +17,7 @@
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
 
+#include <asm/bcache.h>
 #include <asm/cacheflush.h>
 #include <asm/processor.h>
 #include <asm/cpu.h>
@@ -48,14 +49,30 @@ void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
 EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
 
 /* MIPS specific cache operations */
-void (*local_flush_data_cache_page)(void * addr);
 void (*flush_data_cache_page)(unsigned long addr);
 void (*flush_icache_all)(void);
 
-EXPORT_SYMBOL_GPL(local_flush_data_cache_page);
 EXPORT_SYMBOL(flush_data_cache_page);
 EXPORT_SYMBOL(flush_icache_all);
 
+/*
+ * Dummy cache handling routine
+ */
+
+void cache_noop(void) {}
+
+#ifdef CONFIG_BOARD_SCACHE
+
+static struct bcache_ops no_sc_ops = {
+	.bc_enable = (void *)cache_noop,
+	.bc_disable = (void *)cache_noop,
+	.bc_wback_inv = (void *)cache_noop,
+	.bc_inv = (void *)cache_noop
+};
+
+struct bcache_ops *bcops = &no_sc_ops;
+#endif
+
 #ifdef CONFIG_DMA_NONCOHERENT
 
 /* DMA cache operations. */

arch/mips/mti-malta/Makefile

@@ -14,6 +14,4 @@ obj-y				+= malta-platform.o
 obj-y				+= malta-setup.o
 obj-y				+= malta-time.o
 
-obj-$(CONFIG_MIPS_CMP)		+= malta-amon.o
-
 CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt

arch/mips/mti-malta/malta-amon.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2013 Imagination Technologies Ltd.
- *
- * Arbitrary Monitor Interface
- */
-#include <linux/kernel.h>
-#include <linux/smp.h>
-
-#include <asm/addrspace.h>
-#include <asm/mipsmtregs.h>
-#include <asm/mips-boards/launch.h>
-#include <asm/vpe.h>
-
-int amon_cpu_avail(int cpu)
-{
-	struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-
-	if (cpu < 0 || cpu >= NCPULAUNCH) {
-		pr_debug("avail: cpu%d is out of range\n", cpu);
-		return 0;
-	}
-
-	launch += cpu;
-	if (!(launch->flags & LAUNCH_FREADY)) {
-		pr_debug("avail: cpu%d is not ready\n", cpu);
-		return 0;
-	}
-	if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
-		pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
-		return 0;
-	}
-
-	return 1;
-}
-
-int amon_cpu_start(int cpu,
-		    unsigned long pc, unsigned long sp,
-		    unsigned long gp, unsigned long a0)
-{
-	volatile struct cpulaunch *launch =
-		(struct cpulaunch  *)CKSEG0ADDR(CPULAUNCH);
-
-	if (!amon_cpu_avail(cpu))
-		return -1;
-	if (cpu == smp_processor_id()) {
-		pr_debug("launch: I am cpu%d!\n", cpu);
-		return -1;
-	}
-	launch += cpu;
-
-	pr_debug("launch: starting cpu%d\n", cpu);
-
-	launch->pc = pc;
-	launch->gp = gp;
-	launch->sp = sp;
-	launch->a0 = a0;
-
-	smp_wmb();		/* Target must see parameters before go */
-	launch->flags |= LAUNCH_FGO;
-	smp_wmb();		/* Target must see go before we poll  */
-
-	while ((launch->flags & LAUNCH_FGONE) == 0)
-		;
-	smp_rmb();	/* Target will be updating flags soon */
-	pr_debug("launch: cpu%d gone!\n", cpu);
-
-	return 0;
-}
-
-#ifdef CONFIG_MIPS_VPE_LOADER_CMP
-int vpe_run(struct vpe *v)
-{
-	struct vpe_notifications *n;
-
-	if (amon_cpu_start(aprp_cpu_index(), v->__start, 0, 0, 0) < 0)
-		return -1;
-
-	list_for_each_entry(n, &v->notify, list)
-		n->start(VPE_MODULE_MINOR);
-
-	return 0;
-}
-#endif

arch/mips/mti-malta/malta-init.c

@@ -289,8 +289,6 @@ void __init prom_init(void)
 
 	if (!register_cps_smp_ops())
 		return;
-	if (!register_cmp_smp_ops())
-		return;
 	if (!register_vsmp_smp_ops())
 		return;
 	register_up_smp_ops();

arch/mips/mti-malta/malta-platform.c

@@ -43,7 +43,6 @@
 static struct plat_serial8250_port uart8250_data[] = {
 	SMC_PORT(0x3F8, 4),
 	SMC_PORT(0x2F8, 3),
-#ifndef CONFIG_MIPS_CMP
 	{
 		.mapbase	= 0x1f000900,	/* The CBUS UART */
 		.irq		= MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
@@ -53,7 +52,6 @@ static struct plat_serial8250_port uart8250_data[] = {
 		.flags		= CBUS_UART_FLAGS,
 		.regshift	= 3,
 	},
-#endif
 	{ },
 };
 

arch/mips/pci/pci-lantiq.c

@@ -118,7 +118,7 @@ static int ltq_pci_startup(struct platform_device *pdev)
 
 	/* and enable the clocks */
 	clk_enable(clk_pci);
-	if (of_find_property(node, "lantiq,external-clock", NULL))
+	if (of_property_read_bool(node, "lantiq,external-clock"))
 		clk_enable(clk_external);
 	else
 		clk_disable(clk_external);

arch/mips/pci/pci-rt3883.c

@@ -419,7 +419,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 
 	/* find the interrupt controller child node */
 	for_each_child_of_node(np, child) {
-		if (of_get_property(child, "interrupt-controller", NULL)) {
+		if (of_property_read_bool(child, "interrupt-controller")) {
 			rpc->intc_of_node = child;
 			break;
 		}

arch/mips/ralink/Kconfig

@@ -29,18 +29,22 @@ choice
 		select MIPS_AUTO_PFN_OFFSET
 		select MIPS_L1_CACHE_SHIFT_4
 		select HAVE_PCI
+		select SOC_BUS
 
 	config SOC_RT305X
 		bool "RT305x"
+		select SOC_BUS
 
 	config SOC_RT3883
 		bool "RT3883"
 		select HAVE_PCI
+		select SOC_BUS
 
 	config SOC_MT7620
 		bool "MT7620/8"
 		select CPU_MIPSR2_IRQ_VI
 		select HAVE_PCI
+		select SOC_BUS
 
 	config SOC_MT7621
 		bool "MT7621"

arch/mips/ralink/mt7620.c

@@ -11,6 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@@ -49,6 +51,8 @@
 /* does the board have sdram or ddram */
 static int dram_type;
 
+static struct ralink_soc_info *soc_info_ptr;
+
 static __init u32
 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
@@ -324,35 +328,76 @@ mt7628_dram_init(struct ralink_soc_info *soc_info)
 	}
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init mt7620_get_soc_name0(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
-	unsigned char *name = NULL;
-	u32 n0;
-	u32 n1;
-	u32 rev;
-	u32 cfg0;
-	u32 pmu0;
-	u32 pmu1;
-	u32 bga;
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7620_get_soc_name1(void)
+{
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7620_soc_valid(void)
+{
+	if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 &&
+	    mt7620_get_soc_name1() == MT7620_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static bool __init mt7628_soc_valid(void)
+{
+	if (mt7620_get_soc_name0() == MT7620_CHIP_NAME0 &&
+	    mt7620_get_soc_name1() == MT7628_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static unsigned int __init mt7620_get_rev(void)
+{
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7620_get_bga(void)
+{
+	return (mt7620_get_rev() >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+}
+
+static unsigned int __init mt7620_get_efuse(void)
+{
+	return __raw_readl(MT7620_SYSC_BASE + SYSC_REG_EFUSE_CFG);
+}
+
+static unsigned int __init mt7620_get_soc_ver(void)
+{
+	return (mt7620_get_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-	bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+static unsigned int __init mt7620_get_soc_eco(void)
+{
+	return (mt7620_get_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7620_get_soc_name(struct ralink_soc_info *soc_info)
+{
+	if (mt7620_soc_valid()) {
+		u32 bga = mt7620_get_bga();
 
-	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
 		if (bga) {
 			ralink_soc = MT762X_SOC_MT7620A;
-			name = "MT7620A";
 			soc_info->compatible = "ralink,mt7620a-soc";
+			return "MT7620A";
 		} else {
 			ralink_soc = MT762X_SOC_MT7620N;
-			name = "MT7620N";
 			soc_info->compatible = "ralink,mt7620n-soc";
+			return "MT7620N";
 		}
-	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+	} else if (mt7628_soc_valid()) {
+		u32 efuse = mt7620_get_efuse();
+		unsigned char *name = NULL;
 
 		if (efuse & EFUSE_MT7688) {
 			ralink_soc = MT762X_SOC_MT7688;
@@ -362,17 +407,63 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 			name = "MT7628AN";
 		}
 		soc_info->compatible = "ralink,mt7628an-soc";
+		return name;
 	} else {
-		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n",
+		      mt7620_get_soc_name0(), mt7620_get_soc_name1());
+	}
+}
+
+static const char __init *mt7620_get_soc_id_name(void)
+{
+	if (ralink_soc == MT762X_SOC_MT7620A)
+		return "mt7620a";
+	else if (ralink_soc == MT762X_SOC_MT7620N)
+		return "mt7620n";
+	else if (ralink_soc == MT762X_SOC_MT7688)
+		return "mt7688";
+	else if (ralink_soc == MT762X_SOC_MT7628AN)
+		return "mt7628n";
+	else
+		return "invalid";
+}
+
+static int __init mt7620_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = mt7620_get_soc_id_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
 	}
 
+	return 0;
+}
+device_initcall(mt7620_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	const char *name = mt7620_get_soc_name(soc_info);
+	u32 cfg0;
+	u32 pmu0;
+	u32 pmu1;
+
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"MediaTek %s ver:%u eco:%u",
-		name,
-		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
-		(rev & CHIP_REV_ECO_MASK));
+		name, mt7620_get_soc_ver(), mt7620_get_soc_eco());
 
-	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+	cfg0 = __raw_readl(MT7620_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG0);
 	if (is_mt76x8()) {
 		dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
 	} else {
@@ -388,11 +479,13 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 	else
 		mt7620_dram_init(soc_info);
 
-	pmu0 = __raw_readl(sysc + PMU0_CFG);
-	pmu1 = __raw_readl(sysc + PMU1_CFG);
+	pmu0 = __raw_readl(MT7620_SYSC_BASE + PMU0_CFG);
+	pmu1 = __raw_readl(MT7620_SYSC_BASE + PMU1_CFG);
 
 	pr_info("Analog PMU set to %s control\n",
 		(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+
+	soc_info_ptr = soc_info;
 }

arch/mips/ralink/mt7621.c

@@ -217,8 +217,6 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 
 	if (!register_cps_smp_ops())
 		return;
-	if (!register_cmp_smp_ops())
-		return;
 	if (!register_vsmp_smp_ops())
 		return;
 }

arch/mips/ralink/rt288x.c

@@ -10,6 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@@ -17,6 +19,8 @@
 
 #include "common.h"
 
+static struct ralink_soc_info *soc_info_ptr;
+
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, wmac_rate = 40000000;
@@ -57,34 +61,90 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt2880_get_soc_name0(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
-	const char *name;
-	u32 n0;
-	u32 n1;
-	u32 id;
+	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+static unsigned int __init rt2880_get_soc_name1(void)
+{
+	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
 
-	if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
-		soc_info->compatible = "ralink,r2880-soc";
-		name = "RT2880";
-	} else {
-		panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+static bool __init rt2880_soc_valid(void)
+{
+	if (rt2880_get_soc_name0() == RT2880_CHIP_NAME0 &&
+	    rt2880_get_soc_name1() == RT2880_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *rt2880_get_soc_name(void)
+{
+	if (rt2880_soc_valid())
+		return "RT2880";
+	else
+		return "invalid";
+}
+
+static unsigned int __init rt2880_get_soc_id(void)
+{
+	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_ID);
+}
+
+static unsigned int __init rt2880_get_soc_ver(void)
+{
+	return (rt2880_get_soc_id() >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK;
+}
+
+static unsigned int __init rt2880_get_soc_rev(void)
+{
+	return (rt2880_get_soc_id() & CHIP_ID_REV_MASK);
+}
+
+static int __init rt2880_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = rt2880_get_soc_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
 	}
 
+	return 0;
+}
+device_initcall(rt2880_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	if (rt2880_soc_valid())
+		soc_info->compatible = "ralink,r2880-soc";
+	else
+		panic("rt288x: unknown SoC, n0:%08x n1:%08x",
+		      rt2880_get_soc_name0(), rt2880_get_soc_name1());
+
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"Ralink %s id:%u rev:%u",
-		name,
-		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
-		(id & CHIP_ID_REV_MASK));
+		rt2880_get_soc_name(),
+		rt2880_get_soc_ver(),
+		rt2880_get_soc_rev());
 
 	soc_info->mem_base = RT2880_SDRAM_BASE;
 	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
 
 	ralink_soc = RT2880_SOC;
+	soc_info_ptr = soc_info;
 }

arch/mips/ralink/rt305x.c

@@ -11,6 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
@@ -19,13 +21,14 @@
 
 #include "common.h"
 
+static struct ralink_soc_info *soc_info_ptr;
+
 static unsigned long rt5350_get_mem_size(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
 	unsigned long ret;
 	u32 t;
 
-	t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+	t = __raw_readl(RT305X_SYSC_BASE + SYSC_REG_SYSTEM_CONFIG);
 	t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
 		RT5350_SYSCFG0_DRAM_SIZE_MASK;
 
@@ -140,53 +143,149 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt305x_get_soc_name0(void)
+{
+	return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init rt305x_get_soc_name1(void)
+{
+	return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init rt3052_soc_valid(void)
+{
+	if (rt305x_get_soc_name0() == RT3052_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT3052_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static bool __init rt3350_soc_valid(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-	unsigned char *name;
-	u32 n0;
-	u32 n1;
-	u32 id;
+	if (rt305x_get_soc_name0() == RT3350_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT3350_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static bool __init rt3352_soc_valid(void)
+{
+	if (rt305x_get_soc_name0() == RT3352_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT3352_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+static bool __init rt5350_soc_valid(void)
+{
+	if (rt305x_get_soc_name0() == RT5350_CHIP_NAME0 &&
+	    rt305x_get_soc_name1() == RT5350_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
 
-	if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
+static const char __init *rt305x_get_soc_name(struct ralink_soc_info *soc_info)
+{
+	if (rt3052_soc_valid()) {
 		unsigned long icache_sets;
 
 		icache_sets = (read_c0_config1() >> 22) & 7;
 		if (icache_sets == 1) {
 			ralink_soc = RT305X_SOC_RT3050;
-			name = "RT3050";
 			soc_info->compatible = "ralink,rt3050-soc";
+			return "RT3050";
 		} else {
 			ralink_soc = RT305X_SOC_RT3052;
-			name = "RT3052";
 			soc_info->compatible = "ralink,rt3052-soc";
+			return "RT3052";
 		}
-	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
+	} else if (rt3350_soc_valid()) {
 		ralink_soc = RT305X_SOC_RT3350;
-		name = "RT3350";
 		soc_info->compatible = "ralink,rt3350-soc";
-	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
+		return "RT3350";
+	} else if (rt3352_soc_valid()) {
 		ralink_soc = RT305X_SOC_RT3352;
-		name = "RT3352";
 		soc_info->compatible = "ralink,rt3352-soc";
-	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
+		return "RT3352";
+	} else if (rt5350_soc_valid()) {
 		ralink_soc = RT305X_SOC_RT5350;
-		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
+		return "RT5350";
 	} else {
-		panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+		panic("rt305x: unknown SoC, n0:%08x n1:%08x",
+		      rt305x_get_soc_name0(), rt305x_get_soc_name1());
 	}
+}
 
-	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+static unsigned int __init rt305x_get_soc_id(void)
+{
+	return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_ID);
+}
+
+static unsigned int __init rt305x_get_soc_ver(void)
+{
+	return (rt305x_get_soc_id() >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK;
+}
+
+static unsigned int __init rt305x_get_soc_rev(void)
+{
+	return (rt305x_get_soc_id() & CHIP_ID_REV_MASK);
+}
+
+static const char __init *rt305x_get_soc_id_name(void)
+{
+	if (soc_is_rt3050())
+		return "rt3050";
+	else if (soc_is_rt3052())
+		return "rt3052";
+	else if (soc_is_rt3350())
+		return "rt3350";
+	else if (soc_is_rt3352())
+		return "rt3352";
+	else if (soc_is_rt5350())
+		return "rt5350";
+	else
+		return "invalid";
+}
+
+static int __init rt305x_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = rt305x_get_soc_id_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	return 0;
+}
+device_initcall(rt305x_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	const char *name = rt305x_get_soc_name(soc_info);
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"Ralink %s id:%u rev:%u",
 		name,
-		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
-		(id & CHIP_ID_REV_MASK));
+		rt305x_get_soc_ver(),
+		rt305x_get_soc_rev());
 
 	soc_info->mem_base = RT305X_SDRAM_BASE;
 	if (soc_is_rt5350()) {
@@ -198,4 +297,6 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
 		soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
 	}
+
+	soc_info_ptr = soc_info;
 }

arch/mips/ralink/rt3883.c

@@ -10,6 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <asm/mipsregs.h>
 #include <asm/mach-ralink/ralink_regs.h>
@@ -17,6 +19,8 @@
 
 #include "common.h"
 
+static struct ralink_soc_info *soc_info_ptr;
+
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, sys_rate;
@@ -70,34 +74,90 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-void __init prom_soc_init(struct ralink_soc_info *soc_info)
+static unsigned int __init rt3883_get_soc_name0(void)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
-	const char *name;
-	u32 n0;
-	u32 n1;
-	u32 id;
+	return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_CHIPID0_3);
+}
 
-	n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
-	n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
-	id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+static unsigned int __init rt3883_get_soc_name1(void)
+{
+	return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_CHIPID4_7);
+}
 
-	if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
-		soc_info->compatible = "ralink,rt3883-soc";
-		name = "RT3883";
-	} else {
-		panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+static bool __init rt3883_soc_valid(void)
+{
+	if (rt3883_get_soc_name0() == RT3883_CHIP_NAME0 &&
+	    rt3883_get_soc_name1() == RT3883_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *rt3883_get_soc_name(void)
+{
+	if (rt3883_soc_valid())
+		return "RT3883";
+	else
+		return "invalid";
+}
+
+static unsigned int __init rt3883_get_soc_id(void)
+{
+	return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_REVID);
+}
+
+static unsigned int __init rt3883_get_soc_ver(void)
+{
+	return (rt3883_get_soc_id() >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK;
+}
+
+static unsigned int __init rt3883_get_soc_rev(void)
+{
+	return (rt3883_get_soc_id() & RT3883_REVID_ECO_ID_MASK);
+}
+
+static int __init rt3883_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->soc_id = rt3883_get_soc_name();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
 	}
 
+	return 0;
+}
+device_initcall(rt3883_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	if (rt3883_soc_valid())
+		soc_info->compatible = "ralink,rt3883-soc";
+	else
+		panic("rt3883: unknown SoC, n0:%08x n1:%08x",
+		      rt3883_get_soc_name0(), rt3883_get_soc_name1());
+
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"Ralink %s ver:%u eco:%u",
-		name,
-		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
-		(id & RT3883_REVID_ECO_ID_MASK));
+		rt3883_get_soc_name(),
+		rt3883_get_soc_ver(),
+		rt3883_get_soc_rev());
 
 	soc_info->mem_base = RT3883_SDRAM_BASE;
 	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
 	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
 
 	ralink_soc = RT3883_SOC;
+	soc_info_ptr = soc_info;
 }

arch/mips/sibyte/Kconfig

@@ -10,15 +10,6 @@ config SIBYTE_SB1250
 	select SIBYTE_SB1xxx_SOC
 	select SYS_SUPPORTS_SMP
 
-config SIBYTE_BCM1120
-	bool
-	select CEVT_SB1250
-	select CSRC_SB1250
-	select IRQ_MIPS_CPU
-	select SIBYTE_BCM112X
-	select SIBYTE_HAS_ZBUS_PROFILING
-	select SIBYTE_SB1xxx_SOC
-
 config SIBYTE_BCM1125
 	bool
 	select CEVT_SB1250
@@ -29,17 +20,6 @@ config SIBYTE_BCM1125
 	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
 
-config SIBYTE_BCM1125H
-	bool
-	select CEVT_SB1250
-	select CSRC_SB1250
-	select HAVE_PCI
-	select IRQ_MIPS_CPU
-	select SIBYTE_BCM112X
-	select SIBYTE_ENABLE_LDT_IF_PCI
-	select SIBYTE_HAS_ZBUS_PROFILING
-	select SIBYTE_SB1xxx_SOC
-
 config SIBYTE_BCM112X
 	bool
 	select CEVT_SB1250
@@ -58,16 +38,6 @@ config SIBYTE_BCM1x80
 	select SIBYTE_SB1xxx_SOC
 	select SYS_SUPPORTS_SMP
 
-config SIBYTE_BCM1x55
-	bool
-	select CEVT_BCM1480
-	select CSRC_BCM1480
-	select HAVE_PCI
-	select IRQ_MIPS_CPU
-	select SIBYTE_SB1xxx_SOC
-	select SIBYTE_HAS_ZBUS_PROFILING
-	select SYS_SUPPORTS_SMP
-
 config SIBYTE_SB1xxx_SOC
 	bool
 	select IRQ_MIPS_CPU
@@ -143,8 +113,7 @@ config SIBYTE_CFE_CONSOLE
 config SIBYTE_BUS_WATCHER
 	bool "Support for Bus Watcher statistics"
 	depends on SIBYTE_SB1xxx_SOC && \
-		(SIBYTE_BCM112X || SIBYTE_SB1250 || \
-		 SIBYTE_BCM1x55 || SIBYTE_BCM1x80)
+		(SIBYTE_BCM112X || SIBYTE_SB1250 || SIBYTE_BCM1x80)
 	help
 	  Handle and keep statistics on the bus error interrupts (COR_ECC,
 	  BAD_ECC, IO_BUS).

arch/mips/sibyte/Makefile

@@ -6,21 +6,15 @@ obj-$(CONFIG_SIBYTE_BCM112X)	+= sb1250/
 obj-$(CONFIG_SIBYTE_BCM112X)	+= common/
 obj-$(CONFIG_SIBYTE_SB1250)	+= sb1250/
 obj-$(CONFIG_SIBYTE_SB1250)	+= common/
-obj-$(CONFIG_SIBYTE_BCM1x55)	+= bcm1480/
-obj-$(CONFIG_SIBYTE_BCM1x55)	+= common/
 obj-$(CONFIG_SIBYTE_BCM1x80)	+= bcm1480/
 obj-$(CONFIG_SIBYTE_BCM1x80)	+= common/
 
 #
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
 # Sibyte BCM91125C (CRhone) board
 # Sibyte BCM91125E (Rhone) board
 # Sibyte SWARM board
 # Sibyte BCM91x80 (BigSur) board
 #
-obj-$(CONFIG_SIBYTE_CARMEL)	+= swarm/
-obj-$(CONFIG_SIBYTE_CRHINE)	+= swarm/
 obj-$(CONFIG_SIBYTE_CRHONE)	+= swarm/
 obj-$(CONFIG_SIBYTE_RHONE)	+= swarm/
 obj-$(CONFIG_SIBYTE_SENTOSA)	+= swarm/

arch/mips/sibyte/Platform

@@ -13,25 +13,17 @@ cflags-$(CONFIG_SIBYTE_SB1250)	+=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
-cflags-$(CONFIG_SIBYTE_BCM1x55) +=					\
-		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
-		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
-
 cflags-$(CONFIG_SIBYTE_BCM1x80) +=					\
 		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
 		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 #
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
 # Sibyte BCM91125C (CRhone) board
 # Sibyte BCM91125E (Rhone) board
 # Sibyte BCM91250A (SWARM) board
 # Sibyte BCM91250C2 (LittleSur) board
 # Sibyte BCM91x80 (BigSur) board
 #
-load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
-load-$(CONFIG_SIBYTE_CRHINE)	:= 0xffffffff80100000
 load-$(CONFIG_SIBYTE_CRHONE)	:= 0xffffffff80100000
 load-$(CONFIG_SIBYTE_RHONE)	:= 0xffffffff80100000
 load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000

arch/mips/sibyte/common/bus_watcher.c

@@ -24,7 +24,7 @@
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_int.h>
 #include <asm/sibyte/sb1250_scd.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #include <asm/sibyte/bcm1480_regs.h>
 #endif
 
@@ -71,7 +71,7 @@ void check_bus_watcher(void)
 #if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
 	/* Use non-destructive register */
 	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
-#elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#elif defined(CONFIG_SIBYTE_BCM1x80)
 	/* Use non-destructive register */
 	/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
 	status = csr_in32(IOADDR(A_BCM1480_BUS_ERR_STATUS_DEBUG));

arch/mips/sibyte/common/cfe.c

@@ -35,11 +35,6 @@
 #endif
 #endif
 
-#define SIBYTE_MAX_MEM_REGIONS 8
-phys_addr_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
-phys_addr_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
-unsigned int board_mem_region_count;
-
 int cfe_cons_handle;
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -141,16 +136,6 @@ static __init void prom_meminit(void)
 					size -= 512;
 				memblock_add(addr, size);
 			}
-			board_mem_region_addrs[board_mem_region_count] = addr;
-			board_mem_region_sizes[board_mem_region_count] = size;
-			board_mem_region_count++;
-			if (board_mem_region_count ==
-			    SIBYTE_MAX_MEM_REGIONS) {
-				/*
-				 * Too many regions.  Need to configure more
-				 */
-				while(1);
-			}
 		}
 	}
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -310,7 +295,7 @@ void __init prom_init(void)
 #if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
 	register_smp_ops(&sb_smp_ops);
 #endif
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	register_smp_ops(&bcm1480_smp_ops);
 #endif
 }

arch/mips/sibyte/common/sb_tbprof.c

@@ -23,7 +23,7 @@
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_scd.h>
 #include <asm/sibyte/bcm1480_int.h>
@@ -35,7 +35,7 @@
 #error invalid SiByte UART configuration
 #endif
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #undef K_INT_TRACE_FREEZE
 #define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE
 #undef K_INT_PERF_CNT
@@ -157,7 +157,7 @@ static void arm_tb(void)
 	 * a previous interrupt request.  This means that bus profiling
 	 * requires ALL of the SCD perf counters.
 	 */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
 						/* keep counters 0,2,3,4,5,6,7 as is */
 		     V_SPC_CFG_SRC1(1),		/* counter 1 counts cycles */
@@ -290,7 +290,7 @@ static int sbprof_zbprof_start(struct file *filp)
 	 *  pass them through.	I am exploiting my knowledge that
 	 *  cp0_status masks out IP[5]. krw
 	 */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	__raw_writeq(K_BCM1480_INT_MAP_I3,
 		     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) +
 			    ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3)));
@@ -343,7 +343,7 @@ static int sbprof_zbprof_start(struct file *filp)
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
 
 	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	__raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f),
 		     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L)));
 #else

arch/mips/sibyte/swarm/setup.c

@@ -24,7 +24,7 @@
 #include <asm/time.h>
 #include <asm/traps.h>
 #include <asm/sibyte/sb1250.h>
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 #include <asm/sibyte/bcm1480_regs.h>
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 #include <asm/sibyte/sb1250_regs.h>
@@ -34,7 +34,7 @@
 #include <asm/sibyte/sb1250_genbus.h>
 #include <asm/sibyte/board.h>
 
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 extern void bcm1480_setup(void);
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 extern void sb1250_setup(void);
@@ -114,7 +114,7 @@ int update_persistent_clock64(struct timespec64 now)
 
 void __init plat_mem_setup(void)
 {
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#ifdef CONFIG_SIBYTE_BCM1x80
 	bcm1480_setup();
 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 	sb1250_setup();
@@ -146,12 +146,6 @@ void __init plat_mem_setup(void)
 
 #ifdef LEDS_PHYS
 
-#ifdef CONFIG_SIBYTE_CARMEL
-/* XXXKW need to detect Monterey/LittleSur/etc */
-#undef LEDS_PHYS
-#define LEDS_PHYS MLEDS_PHYS
-#endif
-
 void setleds(char *str)
 {
 	void *reg;

drivers/irqchip/irq-mips-gic.c

@@ -54,7 +54,6 @@ static DEFINE_SPINLOCK(gic_lock);
 static struct irq_domain *gic_irq_domain;
 static int gic_shared_intrs;
 static unsigned int gic_cpu_pin;
-static unsigned int timer_cpu_pin;
 static struct irq_chip gic_level_irq_controller, gic_edge_irq_controller;
 
 #ifdef CONFIG_GENERIC_IRQ_IPI
@@ -499,9 +498,6 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq,
 	 */
 	switch (intr) {
 	case GIC_LOCAL_INT_TIMER:
-		/* CONFIG_MIPS_CMP workaround (see __gic_init) */
-		map = GIC_MAP_PIN_MAP_TO_PIN | timer_cpu_pin;
-		fallthrough;
 	case GIC_LOCAL_INT_PERFCTR:
 	case GIC_LOCAL_INT_FDC:
 		/*
@@ -795,34 +791,12 @@ static int __init gic_of_init(struct device_node *node,
 	if (cpu_has_veic) {
 		/* Always use vector 1 in EIC mode */
 		gic_cpu_pin = 0;
-		timer_cpu_pin = gic_cpu_pin;
 		set_vi_handler(gic_cpu_pin + GIC_PIN_TO_VEC_OFFSET,
 			       __gic_irq_dispatch);
 	} else {
 		gic_cpu_pin = cpu_vec - GIC_CPU_PIN_OFFSET;
 		irq_set_chained_handler(MIPS_CPU_IRQ_BASE + cpu_vec,
 					gic_irq_dispatch);
-		/*
-		 * With the CMP implementation of SMP (deprecated), other CPUs
-		 * are started by the bootloader and put into a timer based
-		 * waiting poll loop. We must not re-route those CPU's local
-		 * timer interrupts as the wait instruction will never finish,
-		 * so just handle whatever CPU interrupt it is routed to by
-		 * default.
-		 *
-		 * This workaround should be removed when CMP support is
-		 * dropped.
-		 */
-		if (IS_ENABLED(CONFIG_MIPS_CMP) &&
-		    gic_local_irq_is_routable(GIC_LOCAL_INT_TIMER)) {
-			timer_cpu_pin = read_gic_vl_timer_map() & GIC_MAP_PIN_MAP;
-			irq_set_chained_handler(MIPS_CPU_IRQ_BASE +
-						GIC_CPU_PIN_OFFSET +
-						timer_cpu_pin,
-						gic_irq_dispatch);
-		} else {
-			timer_cpu_pin = gic_cpu_pin;
-		}
 	}
 
 	gic_irq_domain = irq_domain_add_simple(node, GIC_NUM_LOCAL_INTRS +