i2c: normal_i2c can be made const (rtc drivers)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>

drivers/rtc/rtc-ds1672.c

@@ -16,7 +16,7 @@
 #define DRV_VERSION "0.3"
 
 /* Addresses to scan: none. This chip cannot be detected. */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD;

drivers/rtc/rtc-isl1208.c

@@ -61,7 +61,7 @@
 /* i2c configuration */
 #define ISL1208_I2C_ADDR 0xde
 
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
 	ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
 };
 I2C_CLIENT_INSMOD; /* defines addr_data */

drivers/rtc/rtc-max6900.c

@@ -54,7 +54,7 @@
 
 #define MAX6900_I2C_ADDR		0xa0
 
-static unsigned short normal_i2c[] = {
+static const unsigned short normal_i2c[] = {
 	MAX6900_I2C_ADDR >> 1,
 	I2C_CLIENT_END
 };

drivers/rtc/rtc-pcf8563.c

@@ -25,7 +25,7 @@
  * located at 0x51 will pass the validation routine due to
  * the way the registers are implemented.
  */
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 
 /* Module parameters */
 I2C_CLIENT_INSMOD;

drivers/rtc/rtc-pcf8583.c

@@ -40,7 +40,7 @@ struct pcf8583 {
 #define CTRL_ALARM	0x02
 #define CTRL_TIMER	0x01
 
-static unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
 
 /* Module parameters */
 I2C_CLIENT_INSMOD;

drivers/rtc/rtc-x1205.c

@@ -32,7 +32,7 @@
  * unknown chips, the user must explicitly set the probe parameter.
  */
 
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD;