Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux

Pull clock framework updates from Mike Turquette: "The common clock framework changes for 3.11 include new clock drivers across several different platforms and architectures, fixes to existing drivers, a MAINTAINERS file fix and improvements to the basic clock types that allow them to be of use to more platforms than before. Only a few fixes to the core framework are included with most all of the changes landing in the various clock drivers themselves." * tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits) clk: tegra: fix ifdef for tegra_periph_reset_assert inline clk: tegra: provide tegra_periph_reset_assert alternative clk: exynos4: Fix clock aliases for cpufreq related clocks clk: samsung: Add MUX_FA macro to pass flag and alias clk: add support for Rockchip gate clocks clk: vexpress: Make the clock drivers directly available for arm64 clk: vexpress: Use full node name to identify individual clocks clk: tegra: T114: add DFLL DVCO reset control clk: tegra: T114: add DFLL source clocks clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL clk: gate: add CLK_GATE_HIWORD_MASK clk: divider: add CLK_DIVIDER_HIWORD_MASK flag clk: mux: add CLK_MUX_HIWORD_MASK clk: Always notify whole subtree when reparenting MAINTAINERS: make drivers/clk entry match subdirs clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate clk: use clk_get_rate() for debugfs clk: tegra: Use override bits when needed clk: tegra: override bits for Tegra30 PLLM clk: tegra: override bits for Tegra114 PLLM ...

Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux
Pull clock framework updates from Mike Turquette: "The common clock framework changes for 3.11 include new clock drivers across several different platforms and architectures, fixes to existing drivers, a MAINTAINERS file fix and improvements to the basic clock types that allow them to be of use to more platforms than before. Only a few fixes to the core framework are included with most all of the changes landing in the various clock drivers themselves." * tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits) clk: tegra: fix ifdef for tegra_periph_reset_assert inline clk: tegra: provide tegra_periph_reset_assert alternative clk: exynos4: Fix clock aliases for cpufreq related clocks clk: samsung: Add MUX_FA macro to pass flag and alias clk: add support for Rockchip gate clocks clk: vexpress: Make the clock drivers directly available for arm64 clk: vexpress: Use full node name to identify individual clocks clk: tegra: T114: add DFLL DVCO reset control clk: tegra: T114: add DFLL source clocks clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL clk: gate: add CLK_GATE_HIWORD_MASK clk: divider: add CLK_DIVIDER_HIWORD_MASK flag clk: mux: add CLK_MUX_HIWORD_MASK clk: Always notify whole subtree when reparenting MAINTAINERS: make drivers/clk entry match subdirs clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate clk: use clk_get_rate() for debugfs clk: tegra: Use override bits when needed clk: tegra: override bits for Tegra30 PLLM clk: tegra: override bits for Tegra114 PLLM ...
92295f63 · Linus Torvalds · 750b2d7b · 45e3ec37 · 92295f63 · 92295f63
Commit 92295f63 authored Jul 03, 2013 by Linus Torvalds
47 changed files
--- a/Documentation/devicetree/bindings/clock/nspire-clock.txt
+++ b/Documentation/devicetree/bindings/clock/nspire-clock.txt
+TI-NSPIRE Clocks
+
+Required properties:
+- compatible: Valid compatible properties include:
+	"lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model
+	"lsi,nspire-classic-ahb-divider" for the AHB divider in the older model
+	"lsi,nspire-cx-clock" for the base clock in the CX model
+	"lsi,nspire-classic-clock" for the base clock in the older model
+
+- reg: Physical base address of the controller and length of memory mapped
+	region.
+
+Optional:
+- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent
+	clock where it divides the rate from.
+
+Example:
+
+ahb_clk {
+	#clock-cells = <0>;
+	compatible = "lsi,nspire-cx-clock";
+	reg = <0x900B0000 0x4>;
+	clocks = <&base_clk>;
+};
--- a/Documentation/devicetree/bindings/clock/rockchip.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip.txt
+Device Tree Clock bindings for arch-rockchip
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+== Gate clocks ==
+
+The gate registers form a continuos block which makes the dt node
+structure a matter of taste, as either all gates can be put into
+one gate clock spanning all registers or they can be divided into
+the 10 individual gates containing 16 clocks each.
+The code supports both approaches.
+
+Required properties:
+- compatible : "rockchip,rk2928-gate-clk"
+- reg : shall be the control register address(es) for the clock.
+- #clock-cells : from common clock binding; shall be set to 1
+- clock-output-names : the corresponding gate names that the clock controls
+- clocks : should contain the parent clock for each individual gate,
+  therefore the number of clocks elements should match the number of
+  clock-output-names
+
+Example using multiple gate clocks:
+
+		clk_gates0: gate-clk@200000d0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d0 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_core_periph", "gate_cpu_gpll",
+				"gate_ddrphy", "gate_aclk_cpu",
+				"gate_hclk_cpu", "gate_pclk_cpu",
+				"gate_atclk_cpu", "gate_i2s0",
+				"gate_i2s0_frac", "gate_i2s1",
+				"gate_i2s1_frac", "gate_i2s2",
+				"gate_i2s2_frac", "gate_spdif",
+				"gate_spdif_frac", "gate_testclk";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates1: gate-clk@200000d4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d4 0x4>;
+			clocks = <&xin24m>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_timer0", "gate_timer1",
+				"gate_timer2", "gate_jtag",
+				"gate_aclk_lcdc1_src", "gate_otgphy0",
+				"gate_otgphy1", "gate_ddr_gpll",
+				"gate_uart0", "gate_frac_uart0",
+				"gate_uart1", "gate_frac_uart1",
+				"gate_uart2", "gate_frac_uart2",
+				"gate_uart3", "gate_frac_uart3";
+
+			#clock-cells = <1>;
+		};
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -44,6 +44,11 @@ Optional child node properties:
 - silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
  divider.
 - silabs,pll-master: boolean, multisynth can change pll frequency.
+- silabs,disable-state : clock output disable state, shall be
+  0 = clock output is driven LOW when disabled
+  1 = clock output is driven HIGH when disabled
+  2 = clock output is FLOATING (HIGH-Z) when disabled
+  3 = clock output is NEVER disabled

 ==Example==


--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -12,22 +12,30 @@ Required properties:
 	"allwinner,sun4i-axi-clk" - for the AXI clock
 	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
 	"allwinner,sun4i-ahb-clk" - for the AHB clock
-	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates
+	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
+	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun4i-apb0-clk" - for the APB0 clock
-	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
+	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
+	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun4i-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
-	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
+	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
+	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13

 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
 - clocks : shall be the input parent clock(s) phandle for the clock
 - #clock-cells : from common clock binding; shall be set to 0 except for
-	"allwinner,sun4i-*-gates-clk" where it shall be set to 1
+	"allwinner,*-gates-clk" where it shall be set to 1

-Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
+Additionally, "allwinner,*-gates-clk" clocks require:
 - clock-output-names : the corresponding gate names that the clock controls

+Clock consumers should specify the desired clocks they use with a
+"clocks" phandle cell. Consumers that are using a gated clock should
+provide an additional ID in their clock property. The values of this
+ID are documented in sunxi/<soc>-gates.txt.
+
 For example:

 osc24M: osc24M@01c20050 {
@@ -50,102 +58,3 @@ cpu: cpu@01c20054 {
 	reg = <0x01c20054 0x4>;
 	clocks = <&osc32k>, <&osc24M>, <&pll1>;
 };
-
-
-
-Gate clock outputs
-
-The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
-their corresponding offsets as present on sun4i are listed below. Note that
-some of these gates are not present on sun5i.
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM                                                                0
-
-  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
-
-    USB0                                                                0
-    EHCI0                                                               1
-    OHCI0                                                               2*
-    EHCI1                                                               3
-    OHCI1                                                               4*
-    SS                                                                  5
-    DMA                                                                 6
-    BIST                                                                7
-    MMC0                                                                8
-    MMC1                                                                9
-    MMC2                                                                10
-    MMC3                                                                11
-    MS                                                                  12**
-    NAND                                                                13
-    SDRAM                                                               14
-
-    ACE                                                                 16
-    EMAC                                                                17
-    TS                                                                  18
-
-    SPI0                                                                20
-    SPI1                                                                21
-    SPI2                                                                22
-    SPI3                                                                23
-    PATA                                                                24
-    SATA                                                                25**
-    GPS                                                                 26*
-
-    VE                                                                  32
-    TVD                                                                 33
-    TVE0                                                                34
-    TVE1                                                                35
-    LCD0                                                                36
-    LCD1                                                                37
-
-    CSI0                                                                40
-    CSI1                                                                41
-
-    HDMI                                                                43
-    DE_BE0                                                              44
-    DE_BE1                                                              45
-    DE_FE0                                                              46
-    DE_FE1                                                              47
-
-    MP                                                                  50
-
-    MALI400                                                             52
-
-  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
-
-    CODEC                                                               0
-    SPDIF                                                               1*
-    AC97                                                                2
-    IIS                                                                 3
-
-    PIO                                                                 5
-    IR0                                                                 6
-    IR1                                                                 7
-
-    KEYPAD                                                              10
-
-  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
-
-    I2C0                                                                0
-    I2C1                                                                1
-    I2C2                                                                2
-
-    CAN                                                                 4
-    SCR                                                                 5
-    PS20                                                                6
-    PS21                                                                7
-
-    UART0                                                               16
-    UART1                                                               17
-    UART2                                                               18
-    UART3                                                               19
-    UART4                                                               20
-    UART5                                                               21
-    UART6                                                               22
-    UART7                                                               23
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
--- a/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt
+Gate clock outputs
+------------------
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM					0
+
+  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
+
+    USB0					0
+    EHCI0					1
+    OHCI0					2*
+    EHCI1					3
+    OHCI1					4*
+    SS						5
+    DMA						6
+    BIST					7
+    MMC0					8
+    MMC1					9
+    MMC2					10
+    MMC3					11
+    MS						12**
+    NAND					13
+    SDRAM					14
+
+    ACE						16
+    EMAC					17
+    TS						18
+
+    SPI0					20
+    SPI1					21
+    SPI2					22
+    SPI3					23
+    PATA					24
+    SATA					25**
+    GPS						26*
+
+    VE						32
+    TVD						33
+    TVE0					34
+    TVE1					35
+    LCD0					36
+    LCD1					37
+
+    CSI0					40
+    CSI1					41
+
+    HDMI					43
+    DE_BE0					44
+    DE_BE1					45
+    DE_FE1					46
+    DE_FE1					47
+
+    MP						50
+
+    MALI400					52
+
+  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
+
+    CODEC					0
+    SPDIF					1*
+    AC97					2
+    IIS						3
+
+    PIO						5
+    IR0						6
+    IR1						7
+
+    KEYPAD					10
+
+  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
+
+    I2C0					0
+    I2C1					1
+    I2C2					2
+
+    CAN						4
+    SCR						5
+    PS20					6
+    PS21					7
+
+    UART0					16
+    UART1					17
+    UART2					18
+    UART3					19
+    UART4					20
+    UART5					21
+    UART6					22
+    UART7					23
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code
--- a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt
+Gate clock outputs
+------------------
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM					0
+
+  * AHB gates ("allwinner,sun5i-a13-ahb-gates-clk")
+
+    USBOTG					0
+    EHCI					1
+    OHCI					2
+
+    SS						5
+    DMA						6
+    BIST					7
+    MMC0					8
+    MMC1					9
+    MMC2					10
+
+    NAND					13
+    SDRAM					14
+
+    SPI0					20
+    SPI1					21
+    SPI2					22
+
+    STIMER					28
+
+    VE						32
+
+    LCD						36
+
+    CSI						40
+
+    DE_BE					44
+
+    DE_FE					46
+
+    IEP						51
+    MALI400					52
+
+  * APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk")
+
+    CODEC					0
+
+    PIO						5
+    IR						6
+
+  * APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk")
+
+    I2C0					0
+    I2C1					1
+    I2C2					2
+
+    UART1					17
+
+    UART3					19
--- a/Documentation/devicetree/bindings/clock/vt8500.txt
+++ b/Documentation/devicetree/bindings/clock/vt8500.txt
@@ -8,6 +8,8 @@ Required properties:
 - compatible : shall be one of the following:
 	"via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
 	"wm,wm8650-pll-clock" - for a WM8650 PLL clock
+	"wm,wm8750-pll-clock" - for a WM8750 PLL clock
+	"wm,wm8850-pll-clock" - for a WM8850 PLL clock
 	"via,vt8500-device-clock" - for a VT/WM device clock

 Required properties for PLL clocks:

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2131,9 +2131,10 @@ M:	Mike Turquette <mturquette@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (same as CLK API & CLKDEV)
 T:	git git://git.linaro.org/people/mturquette/linux.git
 S:	Maintained
-F:	drivers/clk/clk.c
-F:	drivers/clk/clk-*
+F:	drivers/clk/
+X:	drivers/clk/clkdev.c
 F:	include/linux/clk-pr*
+F:	include/linux/clk/

 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>

--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/irqchip.h>
-#include <linux/clk/tegra.h>
+#include <linux/clk-provider.h>

 #include <asm/hardware/cache-l2x0.h>

@@ -60,7 +60,7 @@ u32 tegra_uart_config[4] = {
 #ifdef CONFIG_OF
 void __init tegra_dt_init_irq(void)
 {
-	tegra_clocks_init();
+	of_clk_init(NULL);
 	tegra_pmc_init();
 	tegra_init_irq();
 	irqchip_init();

--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -76,13 +76,15 @@ void __init ux500_init_irq(void)
 	} else if (cpu_is_u9540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
-		u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+		u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
 			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
 			       U8500_CLKRST6_BASE);
 	} else if (cpu_is_u8540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
-		u8540_clk_init();
+		u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
+			       U8500_CLKRST6_BASE);
 	}
 }


--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -158,6 +158,7 @@ config E500
 config PPC_E500MC
 	bool "e500mc Support"
 	select PPC_FPU
+	select COMMON_CLK
 	depends on E500
 	help
 	  This must be enabled for running on e500mc (and derivatives

--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -42,7 +42,7 @@ config COMMON_CLK_WM831X

 config COMMON_CLK_VERSATILE
 	bool "Clock driver for ARM Reference designs"
-	depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS
+	depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64
 	---help---
          Supports clocking on ARM Reference designs:
 	  - Integrator/AP and Integrator/CP
@@ -58,7 +58,6 @@ config COMMON_CLK_MAX77686
 config COMMON_CLK_SI5351
 	tristate "Clock driver for SiLabs 5351A/B/C"
 	depends on I2C
-	depends on OF
 	select REGMAP_I2C
 	select RATIONAL
 	---help---
@@ -81,6 +80,13 @@ config COMMON_CLK_AXI_CLKGEN
 	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
 	  FPGAs. It is commonly used in Analog Devices' reference designs.

+config CLK_PPC_CORENET
+	bool "Clock driver for PowerPC corenet platforms"
+	depends on PPC_E500MC && OF
+	---help---
+	  This adds the clock driver support for Freescale PowerPC corenet
+	  platforms using common clock framework.
+
 endmenu

 source "drivers/clk/mvebu/Kconfig"
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
+obj-$(CONFIG_ARCH_NSPIRE)	+= clk-nspire.o
 obj-$(CONFIG_ARCH_MXS)		+= mxs/
 obj-$(CONFIG_ARCH_SOCFPGA)	+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
@@ -24,6 +25,7 @@ ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)		+= mmp/
 endif
 obj-$(CONFIG_MACH_LOONGSON1)	+= clk-ls1x.o
+obj-$(CONFIG_ARCH_ROCKCHIP)	+= rockchip/
 obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
@@ -39,3 +41,4 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
 obj-$(CONFIG_CLK_TWL6040)	+= clk-twl6040.o
+obj-$(CONFIG_CLK_PPC_CORENET)	+= clk-ppc-corenet.o
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -150,6 +150,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	struct clk_divider *divider = to_clk_divider(hw);
 	int i, bestdiv = 0;
 	unsigned long parent_rate, best = 0, now, maxdiv;
+	unsigned long parent_rate_saved = *best_parent_rate;

 	if (!rate)
 		rate = 1;
@@ -173,6 +174,15 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	for (i = 1; i <= maxdiv; i++) {
 		if (!_is_valid_div(divider, i))
 			continue;
+		if (rate * i == parent_rate_saved) {
+			/*
+			 * It's the most ideal case if the requested rate can be
+			 * divided from parent clock without needing to change
+			 * parent rate, so return the divider immediately.
+			 */
+			*best_parent_rate = parent_rate_saved;
+			return i;
+		}
 		parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
 				MULT_ROUND_UP(rate, i));
 		now = parent_rate / i;
@@ -217,8 +227,12 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (divider->lock)
 		spin_lock_irqsave(divider->lock, flags);

-	val = readl(divider->reg);
-	val &= ~(div_mask(divider) << divider->shift);
+	if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
+		val = div_mask(divider) << (divider->shift + 16);
+	} else {
+		val = readl(divider->reg);
+		val &= ~(div_mask(divider) << divider->shift);
+	}
 	val |= value << divider->shift;
 	writel(val, divider->reg);

@@ -245,6 +259,13 @@ static struct clk *_register_divider(struct device *dev, const char *name,
 	struct clk *clk;
 	struct clk_init_data init;

+	if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) {
+		if (width + shift > 16) {
+			pr_warn("divider value exceeds LOWORD field\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
 	/* allocate the divider */
 	div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL);
 	if (!div) {

--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -53,12 +53,18 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable)
 	if (gate->lock)
 		spin_lock_irqsave(gate->lock, flags);

-	reg = readl(gate->reg);
-
-	if (set)
-		reg |= BIT(gate->bit_idx);
-	else
-		reg &= ~BIT(gate->bit_idx);
+	if (gate->flags & CLK_GATE_HIWORD_MASK) {
+		reg = BIT(gate->bit_idx + 16);
+		if (set)
+			reg |= BIT(gate->bit_idx);
+	} else {
+		reg = readl(gate->reg);
+
+		if (set)
+			reg |= BIT(gate->bit_idx);
+		else
+			reg &= ~BIT(gate->bit_idx);
+	}

 	writel(reg, gate->reg);

@@ -121,6 +127,13 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	struct clk *clk;
 	struct clk_init_data init;

+	if (clk_gate_flags & CLK_GATE_HIWORD_MASK) {
+		if (bit_idx > 16) {
+			pr_err("gate bit exceeds LOWORD field\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
 	/* allocate the gate */
 	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
 	if (!gate) {

--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -86,8 +86,12 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	if (mux->lock)
 		spin_lock_irqsave(mux->lock, flags);

-	val = readl(mux->reg);
-	val &= ~(mux->mask << mux->shift);
+	if (mux->flags & CLK_MUX_HIWORD_MASK) {
+		val = mux->mask << (mux->shift + 16);
+	} else {
+		val = readl(mux->reg);
+		val &= ~(mux->mask << mux->shift);
+	}
 	val |= index << mux->shift;
 	writel(val, mux->reg);

@@ -111,6 +115,15 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
 	struct clk_mux *mux;
 	struct clk *clk;
 	struct clk_init_data init;
+	u8 width = 0;
+
+	if (clk_mux_flags & CLK_MUX_HIWORD_MASK) {
+		width = fls(mask) - ffs(mask) + 1;
+		if (width + shift > 16) {
+			pr_err("mux value exceeds LOWORD field\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}

 	/* allocate the mux */
 	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);

--- a/drivers/clk/clk-nspire.c
+++ b/drivers/clk/clk-nspire.c
+/*
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define MHZ (1000 * 1000)
+
+#define BASE_CPU_SHIFT		1
+#define BASE_CPU_MASK		0x7F
+
+#define CPU_AHB_SHIFT		12
+#define CPU_AHB_MASK		0x07
+
+#define FIXED_BASE_SHIFT	8
+#define FIXED_BASE_MASK		0x01
+
+#define CLASSIC_BASE_SHIFT	16
+#define CLASSIC_BASE_MASK	0x1F
+
+#define CX_BASE_SHIFT		15
+#define CX_BASE_MASK		0x3F
+
+#define CX_UNKNOWN_SHIFT	21
+#define CX_UNKNOWN_MASK		0x03
+
+struct nspire_clk_info {
+	u32 base_clock;
+	u16 base_cpu_ratio;
+	u16 base_ahb_ratio;
+};
+
+
+#define EXTRACT(var, prop) (((var)>>prop##_SHIFT) & prop##_MASK)
+static void nspire_clkinfo_cx(u32 val, struct nspire_clk_info *clk)
+{
+	if (EXTRACT(val, FIXED_BASE))
+		clk->base_clock = 48 * MHZ;
+	else
+		clk->base_clock = 6 * EXTRACT(val, CX_BASE) * MHZ;
+
+	clk->base_cpu_ratio = EXTRACT(val, BASE_CPU) * EXTRACT(val, CX_UNKNOWN);
+	clk->base_ahb_ratio = clk->base_cpu_ratio * (EXTRACT(val, CPU_AHB) + 1);
+}
+
+static void nspire_clkinfo_classic(u32 val, struct nspire_clk_info *clk)
+{
+	if (EXTRACT(val, FIXED_BASE))
+		clk->base_clock = 27 * MHZ;
+	else
+		clk->base_clock = (300 - 6 * EXTRACT(val, CLASSIC_BASE)) * MHZ;
+
+	clk->base_cpu_ratio = EXTRACT(val, BASE_CPU) * 2;
+	clk->base_ahb_ratio = clk->base_cpu_ratio * (EXTRACT(val, CPU_AHB) + 1);
+}
+
+static void __init nspire_ahbdiv_setup(struct device_node *node,
+		void (*get_clkinfo)(u32, struct nspire_clk_info *))
+{
+	u32 val;
+	void __iomem *io;
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct nspire_clk_info info;
+
+	io = of_iomap(node, 0);
+	if (!io)
+		return;
+	val = readl(io);
+	iounmap(io);
+
+	get_clkinfo(val, &info);
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
+					1, info.base_ahb_ratio);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+
+static void __init nspire_ahbdiv_setup_cx(struct device_node *node)
+{
+	nspire_ahbdiv_setup(node, nspire_clkinfo_cx);
+}
+
+static void __init nspire_ahbdiv_setup_classic(struct device_node *node)
+{
+	nspire_ahbdiv_setup(node, nspire_clkinfo_classic);
+}
+
+CLK_OF_DECLARE(nspire_ahbdiv_cx, "lsi,nspire-cx-ahb-divider",
+		nspire_ahbdiv_setup_cx);
+CLK_OF_DECLARE(nspire_ahbdiv_classic, "lsi,nspire-classic-ahb-divider",
+		nspire_ahbdiv_setup_classic);
+
+static void __init nspire_clk_setup(struct device_node *node,
+		void (*get_clkinfo)(u32, struct nspire_clk_info *))
+{
+	u32 val;
+	void __iomem *io;
+	struct clk *clk;
+	const char *clk_name = node->name;
+	struct nspire_clk_info info;
+
+	io = of_iomap(node, 0);
+	if (!io)
+		return;
+	val = readl(io);
+	iounmap(io);
+
+	get_clkinfo(val, &info);
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT,
+			info.base_clock);
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	else
+		return;
+
+	pr_info("TI-NSPIRE Base: %uMHz CPU: %uMHz AHB: %uMHz\n",
+		info.base_clock / MHZ,
+		info.base_clock / info.base_cpu_ratio / MHZ,
+		info.base_clock / info.base_ahb_ratio / MHZ);
+}
+
+static void __init nspire_clk_setup_cx(struct device_node *node)
+{
+	nspire_clk_setup(node, nspire_clkinfo_cx);
+}
+
+static void __init nspire_clk_setup_classic(struct device_node *node)
+{
+	nspire_clk_setup(node, nspire_clkinfo_classic);
+}
+
+CLK_OF_DECLARE(nspire_clk_cx, "lsi,nspire-cx-clock", nspire_clk_setup_cx);
+CLK_OF_DECLARE(nspire_clk_classic, "lsi,nspire-classic-clock",
+		nspire_clk_setup_classic);
--- a/drivers/clk/clk-ppc-corenet.c
+++ b/drivers/clk/clk-ppc-corenet.c
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * clock driver for Freescale PowerPC corenet SoCs.
+ */
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+struct cmux_clk {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u32 flags;
+};
+
+#define PLL_KILL			BIT(31)
+#define	CLKSEL_SHIFT		27
+#define CLKSEL_ADJUST		BIT(0)
+#define to_cmux_clk(p)		container_of(p, struct cmux_clk, hw)
+
+static void __iomem *base;
+static unsigned int clocks_per_pll;
+
+static int cmux_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct cmux_clk *clk = to_cmux_clk(hw);
+	u32 clksel;
+
+	clksel = ((idx / clocks_per_pll) << 2) + idx % clocks_per_pll;
+	if (clk->flags & CLKSEL_ADJUST)
+		clksel += 8;
+	clksel = (clksel & 0xf) << CLKSEL_SHIFT;
+	iowrite32be(clksel, clk->reg);
+
+	return 0;
+}
+
+static u8 cmux_get_parent(struct clk_hw *hw)
+{
+	struct cmux_clk *clk = to_cmux_clk(hw);
+	u32 clksel;
+
+	clksel = ioread32be(clk->reg);
+	clksel = (clksel >> CLKSEL_SHIFT) & 0xf;
+	if (clk->flags & CLKSEL_ADJUST)
+		clksel -= 8;
+	clksel = (clksel >> 2) * clocks_per_pll + clksel % 4;
+
+	return clksel;
+}
+
+const struct clk_ops cmux_ops = {
+	.get_parent = cmux_get_parent,
+	.set_parent = cmux_set_parent,
+};
+
+static void __init core_mux_init(struct device_node *np)
+{
+	struct clk *clk;
+	struct clk_init_data init;
+	struct cmux_clk *cmux_clk;
+	struct device_node *node;
+	int rc, count, i;
+	u32	offset;
+	const char *clk_name;
+	const char **parent_names;
+
+	rc = of_property_read_u32(np, "reg", &offset);
+	if (rc) {
+		pr_err("%s: could not get reg property\n", np->name);
+		return;
+	}
+
+	/* get the input clock source count */
+	count = of_property_count_strings(np, "clock-names");
+	if (count < 0) {
+		pr_err("%s: get clock count error\n", np->name);
+		return;
+	}
+	parent_names = kzalloc((sizeof(char *) * count), GFP_KERNEL);
+	if (!parent_names) {
+		pr_err("%s: could not allocate parent_names\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < count; i++)
+		parent_names[i] = of_clk_get_parent_name(np, i);
+
+	cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL);
+	if (!cmux_clk) {
+		pr_err("%s: could not allocate cmux_clk\n", __func__);
+		goto err_name;
+	}
+	cmux_clk->reg = base + offset;
+
+	node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen");
+	if (node && (offset >= 0x80))
+		cmux_clk->flags = CLKSEL_ADJUST;
+
+	rc = of_property_read_string_index(np, "clock-output-names",
+			0, &clk_name);
+	if (rc) {
+		pr_err("%s: read clock names error\n", np->name);
+		goto err_clk;
+	}
+
+	init.name = clk_name;
+	init.ops = &cmux_ops;
+	init.parent_names = parent_names;
+	init.num_parents = count;
+	init.flags = 0;
+	cmux_clk->hw.init = &init;
+
+	clk = clk_register(NULL, &cmux_clk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: could not register clock\n", clk_name);
+		goto err_clk;
+	}
+
+	rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+	if (rc) {
+		pr_err("Could not register clock provider for node:%s\n",
+			 np->name);
+		goto err_clk;
+	}
+	goto err_name;
+
+err_clk:
+	kfree(cmux_clk);
+err_name:
+	/* free *_names because they are reallocated when registered */
+	kfree(parent_names);
+}
+
+static void __init core_pll_init(struct device_node *np)
+{
+	u32 offset, mult;
+	int i, rc, count;
+	const char *clk_name, *parent_name;
+	struct clk_onecell_data *onecell_data;
+	struct clk      **subclks;
+
+	rc = of_property_read_u32(np, "reg", &offset);
+	if (rc) {
+		pr_err("%s: could not get reg property\n", np->name);
+		return;
+	}
+
+	/* get the multiple of PLL */
+	mult = ioread32be(base + offset);
+
+	/* check if this PLL is disabled */
+	if (mult & PLL_KILL) {
+		pr_debug("PLL:%s is disabled\n", np->name);
+		return;
+	}
+	mult = (mult >> 1) & 0x3f;
+
+	parent_name = of_clk_get_parent_name(np, 0);
+	if (!parent_name) {
+		pr_err("PLL: %s must have a parent\n", np->name);
+		return;
+	}
+
+	count = of_property_count_strings(np, "clock-output-names");
+	if (count < 0 || count > 4) {
+		pr_err("%s: clock is not supported\n", np->name);
+		return;
+	}
+
+	/* output clock number per PLL */
+	clocks_per_pll = count;
+
+	subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL);
+	if (!subclks) {
+		pr_err("%s: could not allocate subclks\n", __func__);
+		return;
+	}
+
+	onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+	if (!onecell_data) {
+		pr_err("%s: could not allocate onecell_data\n", __func__);
+		goto err_clks;
+	}
+
+	for (i = 0; i < count; i++) {
+		rc = of_property_read_string_index(np, "clock-output-names",
+				i, &clk_name);
+		if (rc) {
+			pr_err("%s: could not get clock names\n", np->name);
+			goto err_cell;
+		}
+
+		/*
+		 * when count == 4, there are 4 output clocks:
+		 * /1, /2, /3, /4 respectively
+		 * when count < 4, there are at least 2 output clocks:
+		 * /1, /2, (/4, if count == 3) respectively.
+		 */
+		if (count == 4)
+			subclks[i] = clk_register_fixed_factor(NULL, clk_name,
+					parent_name, 0, mult, 1 + i);
+		else
+
+			subclks[i] = clk_register_fixed_factor(NULL, clk_name,
+					parent_name, 0, mult, 1 << i);
+
+		if (IS_ERR(subclks[i])) {
+			pr_err("%s: could not register clock\n", clk_name);
+			goto err_cell;
+		}
+	}
+
+	onecell_data->clks = subclks;
+	onecell_data->clk_num = count;
+
+	rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data);
+	if (rc) {
+		pr_err("Could not register clk provider for node:%s\n",
+			 np->name);
+		goto err_cell;
+	}
+
+	return;
+err_cell:
+	kfree(onecell_data);
+err_clks:
+	kfree(subclks);
+}
+
+static const struct of_device_id clk_match[] __initconst = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ .compatible = "fsl,core-pll-clock", .data = core_pll_init, },
+	{ .compatible = "fsl,core-mux-clock", .data = core_mux_init, },
+	{}
+};
+
+static int __init ppc_corenet_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+
+	np = pdev->dev.of_node;
+	base = of_iomap(np, 0);
+	if (!base) {
+		dev_err(&pdev->dev, "iomap error\n");
+		return -ENOMEM;
+	}
+	of_clk_init(clk_match);
+
+	return 0;
+}
+
+static const struct of_device_id ppc_clk_ids[] __initconst = {
+	{ .compatible = "fsl,qoriq-clockgen-1.0", },
+	{ .compatible = "fsl,qoriq-clockgen-2.0", },
+	{}
+};
+
+static struct platform_driver ppc_corenet_clk_driver = {
+	.driver = {
+		.name = "ppc_corenet_clock",
+		.owner = THIS_MODULE,
+		.of_match_table = ppc_clk_ids,
+	},
+	.probe = ppc_corenet_clk_probe,
+};
+
+static int __init ppc_corenet_clk_init(void)
+{
+	return platform_driver_register(&ppc_corenet_clk_driver);
+}
+subsys_initcall(ppc_corenet_clk_init);
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -851,6 +851,41 @@ static int _si5351_clkout_set_drive_strength(
 	return 0;
 }

+static int _si5351_clkout_set_disable_state(
+	struct si5351_driver_data *drvdata, int num,
+	enum si5351_disable_state state)
+{
+	u8 reg = (num < 4) ? SI5351_CLK3_0_DISABLE_STATE :
+		SI5351_CLK7_4_DISABLE_STATE;
+	u8 shift = (num < 4) ? (2 * num) : (2 * (num-4));
+	u8 mask = SI5351_CLK_DISABLE_STATE_MASK << shift;
+	u8 val;
+
+	if (num > 8)
+		return -EINVAL;
+
+	switch (state) {
+	case SI5351_DISABLE_LOW:
+		val = SI5351_CLK_DISABLE_STATE_LOW;
+		break;
+	case SI5351_DISABLE_HIGH:
+		val = SI5351_CLK_DISABLE_STATE_HIGH;
+		break;
+	case SI5351_DISABLE_FLOATING:
+		val = SI5351_CLK_DISABLE_STATE_FLOAT;
+		break;
+	case SI5351_DISABLE_NEVER:
+		val = SI5351_CLK_DISABLE_STATE_NEVER;
+		break;
+	default:
+		return 0;
+	}
+
+	si5351_set_bits(drvdata, reg, mask, val << shift);
+
+	return 0;
+}
+
 static int si5351_clkout_prepare(struct clk_hw *hw)
 {
 	struct si5351_hw_data *hwdata =
@@ -1225,6 +1260,33 @@ static int si5351_dt_parse(struct i2c_client *client)
 			}
 		}

+		if (!of_property_read_u32(child, "silabs,disable-state",
+					  &val)) {
+			switch (val) {
+			case 0:
+				pdata->clkout[num].disable_state =
+					SI5351_DISABLE_LOW;
+				break;
+			case 1:
+				pdata->clkout[num].disable_state =
+					SI5351_DISABLE_HIGH;
+				break;
+			case 2:
+				pdata->clkout[num].disable_state =
+					SI5351_DISABLE_FLOATING;
+				break;
+			case 3:
+				pdata->clkout[num].disable_state =
+					SI5351_DISABLE_NEVER;
+				break;
+			default:
+				dev_err(&client->dev,
+					"invalid disable state %d for clkout %d\n",
+					val, num);
+				return -EINVAL;
+			}
+		}
+
 		if (!of_property_read_u32(child, "clock-frequency", &val))
 			pdata->clkout[num].rate = val;

@@ -1281,9 +1343,6 @@ static int si5351_i2c_probe(struct i2c_client *client,

 	/* Disable interrupts */
 	si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0);
-	/* Set disabled output drivers to drive low */
-	si5351_reg_write(drvdata, SI5351_CLK3_0_DISABLE_STATE, 0x00);
-	si5351_reg_write(drvdata, SI5351_CLK7_4_DISABLE_STATE, 0x00);
 	/* Ensure pll select is on XTAL for Si5351A/B */
 	if (drvdata->variant != SI5351_VARIANT_C)
 		si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE,
@@ -1327,6 +1386,15 @@ static int si5351_i2c_probe(struct i2c_client *client,
 				n, pdata->clkout[n].drive);
 			return ret;
 		}
+
+		ret = _si5351_clkout_set_disable_state(drvdata, n,
+						pdata->clkout[n].disable_state);
+		if (ret) {
+			dev_err(&client->dev,
+				"failed set disable state of clkout%d to %d\n",
+				n, pdata->clkout[n].disable_state);
+			return ret;
+		}
 	}

 	/* register xtal input clock gate */
@@ -1500,7 +1568,10 @@ static int si5351_i2c_probe(struct i2c_client *client,
 }

 static const struct i2c_device_id si5351_i2c_ids[] = {
-	{ "silabs,si5351", 0 },
+	{ "si5351a", 0 },
+	{ "si5351a-msop", 0 },
+	{ "si5351b", 0 },
+	{ "si5351c", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids);

--- a/drivers/clk/clk-si5351.h
+++ b/drivers/clk/clk-si5351.h
@@ -81,6 +81,7 @@

 #define SI5351_CLK3_0_DISABLE_STATE		24
 #define SI5351_CLK7_4_DISABLE_STATE		25
+#define  SI5351_CLK_DISABLE_STATE_MASK		3
 #define  SI5351_CLK_DISABLE_STATE_LOW		0
 #define  SI5351_CLK_DISABLE_STATE_HIGH		1
 #define  SI5351_CLK_DISABLE_STATE_FLOAT		2

--- a/drivers/clk/clk-twl6040.c
+++ b/drivers/clk/clk-twl6040.c
@@ -95,14 +95,14 @@ static int twl6040_clk_probe(struct platform_device *pdev)
 	if (IS_ERR(clkdata->clk))
 		return PTR_ERR(clkdata->clk);

-	dev_set_drvdata(&pdev->dev, clkdata);
+	platform_set_drvdata(pdev, clkdata);

 	return 0;
 }

 static int twl6040_clk_remove(struct platform_device *pdev)
 {
-	struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev);
+	struct twl6040_clk *clkdata = platform_get_drvdata(pdev);

 	clk_unregister(clkdata->clk);


--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -42,6 +42,7 @@ struct clk_device {
 #define PLL_TYPE_VT8500		0
 #define PLL_TYPE_WM8650		1
 #define PLL_TYPE_WM8750		2
+#define PLL_TYPE_WM8850		3

 struct clk_pll {
 	struct clk_hw	hw;
@@ -156,10 +157,6 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate,

 	divisor =  parent_rate / rate;

-	/* If prate / rate would be decimal, incr the divisor */
-	if (rate * divisor < parent_rate)
-		divisor++;
-
 	if (divisor == cdev->div_mask + 1)
 		divisor = 0;

@@ -327,6 +324,15 @@ CLK_OF_DECLARE(vt8500_device, "via,vt8500-device-clock", vtwm_device_clk_init);
 #define WM8750_BITS_TO_VAL(f, m, d1, d2)				\
 		((f << 24) | ((m - 1) << 16) | ((d1 - 1) << 8) | d2)

+/* Helper macros for PLL_WM8850 */
+#define WM8850_PLL_MUL(x)	((((x >> 16) & 0x7F) + 1) * 2)
+#define WM8850_PLL_DIV(x)	((((x >> 8) & 1) + 1) * (1 << (x & 3)))
+
+#define WM8850_BITS_TO_FREQ(r, m, d1, d2)				\
+				(r * ((m + 1) * 2) / ((d1+1) * (1 << d2)))
+
+#define WM8850_BITS_TO_VAL(m, d1, d2)					\
+		((((m / 2) - 1) << 16) | ((d1 - 1) << 8) | d2)

 static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
 				u32 *multiplier, u32 *prediv)
@@ -466,6 +472,49 @@ static void wm8750_find_pll_bits(unsigned long rate, unsigned long parent_rate,
 	*divisor2 = best_div2;
 }

+static void wm8850_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+				u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+	u32 mul, div1, div2;
+	u32 best_mul, best_div1, best_div2;
+	unsigned long tclk, rate_err, best_err;
+
+	best_err = (unsigned long)-1;
+
+	/* Find the closest match (lower or equal to requested) */
+	for (div1 = 1; div1 >= 0; div1--)
+		for (div2 = 3; div2 >= 0; div2--)
+			for (mul = 0; mul <= 127; mul++) {
+				tclk = parent_rate * ((mul + 1) * 2) /
+						((div1 + 1) * (1 << div2));
+				if (tclk > rate)
+					continue;
+				/* error will always be +ve */
+				rate_err = rate - tclk;
+				if (rate_err == 0) {
+					*multiplier = mul;
+					*divisor1 = div1;
+					*divisor2 = div2;
+					return;
+				}
+
+				if (rate_err < best_err) {
+					best_err = rate_err;
+					best_mul = mul;
+					best_div1 = div1;
+					best_div2 = div2;
+				}
+			}
+
+	/* if we got here, it wasn't an exact match */
+	pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+							rate - best_err);
+
+	*multiplier = best_mul;
+	*divisor1 = best_div1;
+	*divisor2 = best_div2;
+}
+
 static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long parent_rate)
 {
@@ -489,6 +538,10 @@ static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 		wm8750_find_pll_bits(rate, parent_rate, &filter, &mul, &div1, &div2);
 		pll_val = WM8750_BITS_TO_VAL(filter, mul, div1, div2);
 		break;
+	case PLL_TYPE_WM8850:
+		wm8850_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
+		pll_val = WM8850_BITS_TO_VAL(mul, div1, div2);
+		break;
 	default:
 		pr_err("%s: invalid pll type\n", __func__);
 		return 0;
@@ -525,6 +578,10 @@ static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 		wm8750_find_pll_bits(rate, *prate, &filter, &mul, &div1, &div2);
 		round_rate = WM8750_BITS_TO_FREQ(*prate, mul, div1, div2);
 		break;
+	case PLL_TYPE_WM8850:
+		wm8850_find_pll_bits(rate, *prate, &mul, &div1, &div2);
+		round_rate = WM8850_BITS_TO_FREQ(*prate, mul, div1, div2);
+		break;
 	default:
 		round_rate = 0;
 	}
@@ -552,6 +609,10 @@ static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw,
 		pll_freq = parent_rate * WM8750_PLL_MUL(pll_val);
 		pll_freq /= WM8750_PLL_DIV(pll_val);
 		break;
+	case PLL_TYPE_WM8850:
+		pll_freq = parent_rate * WM8850_PLL_MUL(pll_val);
+		pll_freq /= WM8850_PLL_DIV(pll_val);
+		break;
 	default:
 		pll_freq = 0;
 	}
@@ -628,6 +689,12 @@ static void __init wm8750_pll_init(struct device_node *node)
 }
 CLK_OF_DECLARE(wm8750_pll, "wm,wm8750-pll-clock", wm8750_pll_init);

+static void __init wm8850_pll_init(struct device_node *node)
+{
+	vtwm_pll_clk_init(node, PLL_TYPE_WM8850);
+}
+CLK_OF_DECLARE(wm8850_pll, "wm,wm8850-pll-clock", wm8850_pll_init);
+
 void __init vtwm_clk_init(void __iomem *base)
 {
 	if (!base)

--- a/drivers/clk/clk-wm831x.c
+++ b/drivers/clk/clk-wm831x.c
@@ -97,7 +97,7 @@ static int wm831x_fll_prepare(struct clk_hw *hw)
 	struct wm831x *wm831x = clkdata->wm831x;
 	int ret;

-	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2,
+	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1,
 			      WM831X_FLL_ENA, WM831X_FLL_ENA);
 	if (ret != 0)
 		dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret);
@@ -114,9 +114,9 @@ static void wm831x_fll_unprepare(struct clk_hw *hw)
 	struct wm831x *wm831x = clkdata->wm831x;
 	int ret;

-	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_2, WM831X_FLL_ENA, 0);
+	ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1, WM831X_FLL_ENA, 0);
 	if (ret != 0)
-		dev_crit(wm831x->dev, "Failed to disaable FLL: %d\n", ret);
+		dev_crit(wm831x->dev, "Failed to disable FLL: %d\n", ret);
 }

 static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw,
@@ -299,8 +299,8 @@ static void wm831x_clkout_unprepare(struct clk_hw *hw)
 }

 static const char *wm831x_clkout_parents[] = {
-	"xtal",
 	"fll",
+	"xtal",
 };

 static u8 wm831x_clkout_get_parent(struct clk_hw *hw)
@@ -318,9 +318,9 @@ static u8 wm831x_clkout_get_parent(struct clk_hw *hw)
 	}

 	if (ret & WM831X_CLKOUT_SRC)
-		return 0;
-	else
 		return 1;
+	else
+		return 0;
 }

 static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent)
@@ -384,7 +384,7 @@ static int wm831x_clk_probe(struct platform_device *pdev)
 	if (IS_ERR(clkdata->clkout))
 		return PTR_ERR(clkdata->clkout);

-	dev_set_drvdata(&pdev->dev, clkdata);
+	platform_set_drvdata(pdev, clkdata);

 	return 0;
 }

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -107,7 +107,7 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level)
 	seq_printf(s, "%*s%-*s %-11d %-12d %-10lu",
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
-		   c->enable_count, c->prepare_count, c->rate);
+		   c->enable_count, c->prepare_count, clk_get_rate(c));
 	seq_printf(s, "\n");
 }

@@ -166,7 +166,7 @@ static void clk_dump_one(struct seq_file *s, struct clk *c, int level)
 	seq_printf(s, "\"%s\": { ", c->name);
 	seq_printf(s, "\"enable_count\": %d,", c->enable_count);
 	seq_printf(s, "\"prepare_count\": %d,", c->prepare_count);
-	seq_printf(s, "\"rate\": %lu", c->rate);
+	seq_printf(s, "\"rate\": %lu", clk_get_rate(c));
 }

 static void clk_dump_subtree(struct seq_file *s, struct clk *c, int level)
@@ -534,7 +534,7 @@ static int clk_disable_unused(void)

 	return 0;
 }
-late_initcall(clk_disable_unused);
+late_initcall_sync(clk_disable_unused);

 /***    helper functions   ***/

@@ -1216,7 +1216,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	clk_prepare_lock();

 	/* bail early if nothing to do */
-	if (rate == clk->rate)
+	if (rate == clk_get_rate(clk))
 		goto out;

 	if ((clk->flags & CLK_SET_RATE_GATE) && clk->prepare_count) {
@@ -1377,23 +1377,33 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 	unsigned long flags;
 	int ret = 0;
 	struct clk *old_parent = clk->parent;
-	bool migrated_enable = false;

-	/* migrate prepare */
-	if (clk->prepare_count)
+	/*
+	 * Migrate prepare state between parents and prevent race with
+	 * clk_enable().
+	 *
+	 * If the clock is not prepared, then a race with
+	 * clk_enable/disable() is impossible since we already have the
+	 * prepare lock (future calls to clk_enable() need to be preceded by
+	 * a clk_prepare()).
+	 *
+	 * If the clock is prepared, migrate the prepared state to the new
+	 * parent and also protect against a race with clk_enable() by
+	 * forcing the clock and the new parent on.  This ensures that all
+	 * future calls to clk_enable() are practically NOPs with respect to
+	 * hardware and software states.
+	 *
+	 * See also: Comment for clk_set_parent() below.
+	 */
+	if (clk->prepare_count) {
 		__clk_prepare(parent);
-
-	flags = clk_enable_lock();
-
-	/* migrate enable */
-	if (clk->enable_count) {
-		__clk_enable(parent);
-		migrated_enable = true;
+		clk_enable(parent);
+		clk_enable(clk);
 	}

 	/* update the clk tree topology */
+	flags = clk_enable_lock();
 	clk_reparent(clk, parent);
-
 	clk_enable_unlock(flags);

 	/* change clock input source */
@@ -1401,43 +1411,27 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 		ret = clk->ops->set_parent(clk->hw, p_index);

 	if (ret) {
-		/*
-		 * The error handling is tricky due to that we need to release
-		 * the spinlock while issuing the .set_parent callback. This
-		 * means the new parent might have been enabled/disabled in
-		 * between, which must be considered when doing rollback.
-		 */
 		flags = clk_enable_lock();
-
 		clk_reparent(clk, old_parent);
-
-		if (migrated_enable && clk->enable_count) {
-			__clk_disable(parent);
-		} else if (migrated_enable && (clk->enable_count == 0)) {
-			__clk_disable(old_parent);
-		} else if (!migrated_enable && clk->enable_count) {
-			__clk_disable(parent);
-			__clk_enable(old_parent);
-		}
-
 		clk_enable_unlock(flags);

-		if (clk->prepare_count)
+		if (clk->prepare_count) {
+			clk_disable(clk);
+			clk_disable(parent);
 			__clk_unprepare(parent);
-
+		}
 		return ret;
 	}

-	/* clean up enable for old parent if migration was done */
-	if (migrated_enable) {
-		flags = clk_enable_lock();
-		__clk_disable(old_parent);
-		clk_enable_unlock(flags);
-	}
-
-	/* clean up prepare for old parent if migration was done */
-	if (clk->prepare_count)
+	/*
+	 * Finish the migration of prepare state and undo the changes done
+	 * for preventing a race with clk_enable().
+	 */
+	if (clk->prepare_count) {
+		clk_disable(clk);
+		clk_disable(old_parent);
 		__clk_unprepare(old_parent);
+	}

 	/* update debugfs with new clk tree topology */
 	clk_debug_reparent(clk, parent);
@@ -1449,12 +1443,17 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 * @clk: the mux clk whose input we are switching
 * @parent: the new input to clk
 *
- * Re-parent clk to use parent as it's new input source.  If clk has the
- * CLK_SET_PARENT_GATE flag set then clk must be gated for this
- * operation to succeed.  After successfully changing clk's parent
- * clk_set_parent will update the clk topology, sysfs topology and
- * propagate rate recalculation via __clk_recalc_rates.  Returns 0 on
- * success, -EERROR otherwise.
+ * Re-parent clk to use parent as its new input source.  If clk is in
+ * prepared state, the clk will get enabled for the duration of this call. If
+ * that's not acceptable for a specific clk (Eg: the consumer can't handle
+ * that, the reparenting is glitchy in hardware, etc), use the
+ * CLK_SET_PARENT_GATE flag to allow reparenting only when clk is unprepared.
+ *
+ * After successfully changing clk's parent clk_set_parent will update the
+ * clk topology, sysfs topology and propagate rate recalculation via
+ * __clk_recalc_rates.
+ *
+ * Returns 0 on success, -EERROR otherwise.
 */
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
@@ -1494,8 +1493,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	}

 	/* propagate PRE_RATE_CHANGE notifications */
-	if (clk->notifier_count)
-		ret = __clk_speculate_rates(clk, p_rate);
+	ret = __clk_speculate_rates(clk, p_rate);

 	/* abort if a driver objects */
 	if (ret & NOTIFY_STOP_MASK)

--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
+#
+# Rockchip Clock specific Makefile
+#
+
+obj-y	+= clk-rockchip.o
--- a/drivers/clk/rockchip/clk-rockchip.c
+++ b/drivers/clk/rockchip/clk-rockchip.c
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+static DEFINE_SPINLOCK(clk_lock);
+
+/*
+ * Gate clocks
+ */
+
+static void __init rk2928_gate_clk_init(struct device_node *node,
+					 void *data)
+{
+	struct clk_onecell_data *clk_data;
+	const char *clk_parent;
+	const char *clk_name;
+	void __iomem *reg;
+	void __iomem *reg_idx;
+	int flags;
+	int qty;
+	int reg_bit;
+	int clkflags = CLK_SET_RATE_PARENT;
+	int i;
+
+	qty = of_property_count_strings(node, "clock-output-names");
+	if (qty < 0) {
+		pr_err("%s: error in clock-output-names %d\n", __func__, qty);
+		return;
+	}
+
+	if (qty == 0) {
+		pr_info("%s: nothing to do\n", __func__);
+		return;
+	}
+
+	reg = of_iomap(node, 0);
+
+	clk_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->clks = kzalloc(qty * sizeof(struct clk *), GFP_KERNEL);
+	if (!clk_data->clks) {
+		kfree(clk_data);
+		return;
+	}
+
+	flags = CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE;
+
+	for (i = 0; i < qty; i++) {
+		of_property_read_string_index(node, "clock-output-names",
+					      i, &clk_name);
+
+		/* ignore empty slots */
+		if (!strcmp("reserved", clk_name))
+			continue;
+
+		clk_parent = of_clk_get_parent_name(node, i);
+
+		/* keep all gates untouched for now */
+		clkflags |= CLK_IGNORE_UNUSED;
+
+		reg_idx = reg + (4 * (i / 16));
+		reg_bit = (i % 16);
+
+		clk_data->clks[i] = clk_register_gate(NULL, clk_name,
+						      clk_parent, clkflags,
+						      reg_idx, reg_bit,
+						      flags,
+						      &clk_lock);
+		WARN_ON(IS_ERR(clk_data->clks[i]));
+	}
+
+	clk_data->clk_num = qty;
+
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(rk2928_gate, "rockchip,rk2928-gate-clk", rk2928_gate_clk_init);
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -356,8 +356,8 @@ struct samsung_fixed_rate_clock exynos4210_fixed_rate_clks[] __initdata = {

 /* list of mux clocks supported in all exynos4 soc's */
 struct samsung_mux_clock exynos4_mux_clks[] __initdata = {
-	MUX_F(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
-			CLK_SET_RATE_PARENT, 0),
+	MUX_FA(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
+			CLK_SET_RATE_PARENT, 0, "mout_apll"),
 	MUX(none, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1),
 	MUX(none, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1),
 	MUX(none, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
@@ -385,9 +385,9 @@ struct samsung_mux_clock exynos4210_mux_clks[] __initdata = {
 	MUX(none, "mout_g2d", mout_g2d_p, E4210_SRC_IMAGE, 8, 1),
 	MUX(none, "mout_fimd1", group1_p4210, E4210_SRC_LCD1, 0, 4),
 	MUX(none, "mout_mipi1", group1_p4210, E4210_SRC_LCD1, 12, 4),
-	MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "sclk_mpll"),
+	MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "mout_mpll"),
 	MUX_A(mout_core, "mout_core", mout_core_p4210,
-			SRC_CPU, 16, 1, "mout_core"),
+			SRC_CPU, 16, 1, "moutcore"),
 	MUX_A(sclk_vpll, "sclk_vpll", sclk_vpll_p4210,
 			SRC_TOP0, 8, 1, "sclk_vpll"),
 	MUX(mout_fimc0, "mout_fimc0", group1_p4210, SRC_CAM, 0, 4),
@@ -424,8 +424,8 @@ struct samsung_mux_clock exynos4210_mux_clks[] __initdata = {

 /* list of mux clocks supported in exynos4x12 soc */
 struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = {
-	MUX(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12,
-			SRC_CPU, 24, 1),
+	MUX_A(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12,
+			SRC_CPU, 24, 1, "mout_mpll"),
 	MUX(none, "mout_aclk266_gps", aclk_p4412, SRC_TOP1, 4, 1),
 	MUX(none, "mout_aclk400_mcuisp", aclk_p4412, SRC_TOP1, 8, 1),
 	MUX(mout_mpll_user_t, "mout_mpll_user_t", mout_mpll_user_p4x12,
@@ -449,7 +449,8 @@ struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = {
 			SRC_DMC, 12, 1, "sclk_mpll"),
 	MUX_A(sclk_vpll, "sclk_vpll", mout_vpll_p,
 			SRC_TOP0, 8, 1, "sclk_vpll"),
-	MUX(mout_core, "mout_core", mout_core_p4x12, SRC_CPU, 16, 1),
+	MUX_A(mout_core, "mout_core", mout_core_p4x12,
+			SRC_CPU, 16, 1, "moutcore"),
 	MUX(mout_fimc0, "mout_fimc0", group1_p4x12, SRC_CAM, 0, 4),
 	MUX(mout_fimc1, "mout_fimc1", group1_p4x12, SRC_CAM, 4, 4),
 	MUX(mout_fimc2, "mout_fimc2", group1_p4x12, SRC_CAM, 8, 4),
@@ -537,7 +538,7 @@ struct samsung_div_clock exynos4_div_clks[] __initdata = {
 	DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8),
 	DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4),
 	DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4),
-	DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "arm_clk"),
+	DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "armclk"),
 	DIV_A(sclk_apll, "sclk_apll", "mout_apll",
 			DIV_CPU0, 24, 3, "sclk_apll"),
 	DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4,
@@ -1070,9 +1071,9 @@ void __init exynos4_clk_init(struct device_node *np, enum exynos4_soc exynos4_so
 	pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n"
 		"\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n",
 		exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12",
-		_get_rate("sclk_apll"),	_get_rate("sclk_mpll"),
+		_get_rate("sclk_apll"),	_get_rate("mout_mpll"),
 		_get_rate("sclk_epll"), _get_rate("sclk_vpll"),
-		_get_rate("arm_clk"));
+		_get_rate("armclk"));
 }



--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -144,6 +144,9 @@ struct samsung_mux_clock {
 #define MUX_F(_id, cname, pnames, o, s, w, f, mf)		\
 	__MUX(_id, NULL, cname, pnames, o, s, w, f, mf, NULL)

+#define MUX_FA(_id, cname, pnames, o, s, w, f, mf, a)		\
+	__MUX(_id, NULL, cname, pnames, o, s, w, f, mf, a)
+
 /**
 * @id: platform specific id of the clock.
 * struct samsung_div_clock: information about div clock

--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -239,7 +239,7 @@ struct mux_data {
 	u8 shift;
 };

-static const __initconst struct mux_data cpu_data = {
+static const __initconst struct mux_data cpu_mux_data = {
 	.shift = 16,
 };

@@ -333,22 +333,34 @@ struct gates_data {
 	DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
 };

-static const __initconst struct gates_data axi_gates_data = {
+static const __initconst struct gates_data sun4i_axi_gates_data = {
 	.mask = {1},
 };

-static const __initconst struct gates_data ahb_gates_data = {
+static const __initconst struct gates_data sun4i_ahb_gates_data = {
 	.mask = {0x7F77FFF, 0x14FB3F},
 };

-static const __initconst struct gates_data apb0_gates_data = {
+static const __initconst struct gates_data sun5i_a13_ahb_gates_data = {
+	.mask = {0x107067e7, 0x185111},
+};
+
+static const __initconst struct gates_data sun4i_apb0_gates_data = {
 	.mask = {0x4EF},
 };

-static const __initconst struct gates_data apb1_gates_data = {
+static const __initconst struct gates_data sun5i_a13_apb0_gates_data = {
+	.mask = {0x61},
+};
+
+static const __initconst struct gates_data sun4i_apb1_gates_data = {
 	.mask = {0xFF00F7},
 };

+static const __initconst struct gates_data sun5i_a13_apb1_gates_data = {
+	.mask = {0xa0007},
+};
+
 static void __init sunxi_gates_clk_setup(struct device_node *node,
 					 struct gates_data *data)
 {
@@ -421,17 +433,20 @@ static const __initconst struct of_device_id clk_div_match[] = {

 /* Matches for mux clocks */
 static const __initconst struct of_device_id clk_mux_match[] = {
-	{.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,},
+	{.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_mux_data,},
 	{.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,},
 	{}
 };

 /* Matches for gate clocks */
 static const __initconst struct of_device_id clk_gates_match[] = {
-	{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,},
-	{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,},
-	{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,},
-	{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,},
+	{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,},
+	{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
+	{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
+	{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
+	{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
+	{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
+	{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
 	{}
 };


--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1287,7 +1287,7 @@ static const struct of_device_id pmc_match[] __initconst = {
 	{},
 };

-void __init tegra20_clock_init(struct device_node *np)
+static void __init tegra20_clock_init(struct device_node *np)
 {
 	int i;
 	struct device_node *node;
@@ -1339,3 +1339,4 @@ void __init tegra20_clock_init(struct device_node *np)

 	tegra_cpu_car_ops = &tegra20_cpu_car_ops;
 }
+CLK_OF_DECLARE(tegra20, "nvidia,tegra20-car", tegra20_clock_init);
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -252,6 +252,9 @@
 #define CLK_RESET_CCLK_RUN_POLICY		2
 #define CLK_RESET_CCLK_BURST_POLICY_PLLX	8

+/* PLLM override registers */
+#define PMC_PLLM_WB0_OVERRIDE 0x1dc
+
 #ifdef CONFIG_PM_SLEEP
 static struct cpu_clk_suspend_context {
 	u32 pllx_misc;
@@ -563,6 +566,18 @@ static struct tegra_clk_pll_params pll_c_params = {
 	.lock_delay = 300,
 };

+static struct div_nmp pllm_nmp = {
+	.divn_shift = 8,
+	.divn_width = 10,
+	.override_divn_shift = 5,
+	.divm_shift = 0,
+	.divm_width = 5,
+	.override_divm_shift = 0,
+	.divp_shift = 20,
+	.divp_width = 3,
+	.override_divp_shift = 15,
+};
+
 static struct tegra_clk_pll_params pll_m_params = {
 	.input_min = 2000000,
 	.input_max = 31000000,
@@ -575,6 +590,9 @@ static struct tegra_clk_pll_params pll_m_params = {
 	.lock_mask = PLL_BASE_LOCK,
 	.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
 	.lock_delay = 300,
+	.div_nmp = &pllm_nmp,
+	.pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE,
+	.pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE,
 };

 static struct tegra_clk_pll_params pll_p_params = {
@@ -1223,7 +1241,7 @@ static void __init tegra30_pmc_clk_init(void)

 	/* clk_out_2 */
 	clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents,
-			       ARRAY_SIZE(clk_out1_parents), 0,
+			       ARRAY_SIZE(clk_out2_parents), 0,
 			       pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0,
 			       &clk_out_lock);
 	clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0,
@@ -1234,7 +1252,7 @@ static void __init tegra30_pmc_clk_init(void)

 	/* clk_out_3 */
 	clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents,
-			       ARRAY_SIZE(clk_out1_parents), 0,
+			       ARRAY_SIZE(clk_out3_parents), 0,
 			       pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0,
 			       &clk_out_lock);
 	clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0,
@@ -1954,7 +1972,7 @@ static const struct of_device_id pmc_match[] __initconst = {
 	{},
 };

-void __init tegra30_clock_init(struct device_node *np)
+static void __init tegra30_clock_init(struct device_node *np)
 {
 	struct device_node *node;
 	int i;
@@ -2005,3 +2023,4 @@ void __init tegra30_clock_init(struct device_node *np)

 	tegra_cpu_car_ops = &tegra30_cpu_car_ops;
 }
+CLK_OF_DECLARE(tegra30, "nvidia,tegra30-car", tegra30_clock_init);
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
@@ -74,18 +74,6 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl,
 	}
 }

-static const struct of_device_id tegra_dt_clk_match[] = {
-	{ .compatible = "nvidia,tegra20-car", .data = tegra20_clock_init },
-	{ .compatible = "nvidia,tegra30-car", .data = tegra30_clock_init },
-	{ .compatible = "nvidia,tegra114-car", .data = tegra114_clock_init },
-	{ }
-};
-
-void __init tegra_clocks_init(void)
-{
-	of_clk_init(tegra_dt_clk_match);
-}
-
 tegra_clk_apply_init_table_func tegra_clk_apply_init_table;

 void __init tegra_clocks_apply_init_table(void)

--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -127,6 +127,31 @@ struct pdiv_map {
 	u8 hw_val;
 };

+/**
+ * struct div_nmp - offset and width of m,n and p fields
+ *
+ * @divn_shift:	shift to the feedback divider bit field
+ * @divn_width:	width of the feedback divider bit field
+ * @divm_shift:	shift to the input divider bit field
+ * @divm_width:	width of the input divider bit field
+ * @divp_shift:	shift to the post divider bit field
+ * @divp_width:	width of the post divider bit field
+ * @override_divn_shift: shift to the feedback divider bitfield in override reg
+ * @override_divm_shift: shift to the input divider bitfield in override reg
+ * @override_divp_shift: shift to the post divider bitfield in override reg
+ */
+struct div_nmp {
+	u8		divn_shift;
+	u8		divn_width;
+	u8		divm_shift;
+	u8		divm_width;
+	u8		divp_shift;
+	u8		divp_width;
+	u8		override_divn_shift;
+	u8		override_divm_shift;
+	u8		override_divp_shift;
+};
+
 /**
 * struct clk_pll_params - PLL parameters
 *
@@ -161,11 +186,14 @@ struct tegra_clk_pll_params {
 	u32		aux_reg;
 	u32		dyn_ramp_reg;
 	u32		ext_misc_reg[3];
+	u32		pmc_divnm_reg;
+	u32		pmc_divp_reg;
 	int		stepa_shift;
 	int		stepb_shift;
 	int		lock_delay;
 	int		max_p;
 	struct pdiv_map *pdiv_tohw;
+	struct div_nmp	*div_nmp;
 };

 /**
@@ -179,12 +207,6 @@ struct tegra_clk_pll_params {
 * @flags:	PLL flags
 * @fixed_rate:	PLL rate if it is fixed
 * @lock:	register lock
- * @divn_shift:	shift to the feedback divider bit field
- * @divn_width:	width of the feedback divider bit field
- * @divm_shift:	shift to the input divider bit field
- * @divm_width:	width of the input divider bit field
- * @divp_shift:	shift to the post divider bit field
- * @divp_width:	width of the post divider bit field
 *
 * Flags:
 * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
@@ -214,12 +236,6 @@ struct tegra_clk_pll {
 	u32		flags;
 	unsigned long	fixed_rate;
 	spinlock_t	*lock;
-	u8		divn_shift;
-	u8		divn_width;
-	u8		divm_shift;
-	u8		divm_width;
-	u8		divp_shift;
-	u8		divp_width;
 	struct tegra_clk_pll_freq_table	*freq_table;
 	struct tegra_clk_pll_params	*params;
 };
@@ -571,23 +587,11 @@ void tegra_init_from_table(struct tegra_clk_init_table *tbl,
 void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
 		struct clk *clks[], int clk_max);

-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void tegra20_clock_init(struct device_node *np);
-#else
-static inline void tegra20_clock_init(struct device_node *np) {}
-#endif /* CONFIG_ARCH_TEGRA_2x_SOC */
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-void tegra30_clock_init(struct device_node *np);
-#else
-static inline void tegra30_clock_init(struct device_node *np) {}
-#endif /* CONFIG_ARCH_TEGRA_3x_SOC */
-
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
-void tegra114_clock_init(struct device_node *np);
-#else
-static inline void tegra114_clock_init(struct device_node *np) {}
-#endif /* CONFIG_ARCH_TEGRA114_SOC */
+void tegra114_clock_tune_cpu_trimmers_high(void);
+void tegra114_clock_tune_cpu_trimmers_low(void);
+void tegra114_clock_tune_cpu_trimmers_init(void);
+void tegra114_clock_assert_dfll_dvco_reset(void);
+void tegra114_clock_deassert_dfll_dvco_reset(void);

 typedef void (*tegra_clk_apply_init_table_func)(void);
 extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table;

--- a/drivers/clk/ux500/abx500-clk.c
+++ b/drivers/clk/ux500/abx500-clk.c
@@ -45,7 +45,7 @@ static int ab8500_reg_clks(struct device *dev)
 				CLK_IS_ROOT);
 	clk_register_clkdev(clk, "sysclk", "ab8500-usb.0");
 	clk_register_clkdev(clk, "sysclk", "ab-iddet.0");
-	clk_register_clkdev(clk, "sysclk", "ab85xx-codec.0");
+	clk_register_clkdev(clk, "sysclk", "snd-soc-mop500.0");
 	clk_register_clkdev(clk, "sysclk", "shrm_bus");

 	/* ab8500_sysclk2 */
@@ -70,19 +70,19 @@ static int ab8500_reg_clks(struct device *dev)
 		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_ULPCLKREQ,
 		AB8500_SYSULPCLKCTRL1_ULPCLKREQ,
 		38400000, 9000, CLK_IS_ROOT);
-	clk_register_clkdev(clk, "ulpclk", "ab85xx-codec.0");
+	clk_register_clkdev(clk, "ulpclk", "snd-soc-mop500.0");

 	/* ab8500_intclk */
 	clk = clk_reg_sysctrl_set_parent(dev , "intclk", intclk_parents, 2,
 		intclk_reg_sel, intclk_reg_mask, intclk_reg_bits, 0);
-	clk_register_clkdev(clk, "intclk", "ab85xx-codec.0");
+	clk_register_clkdev(clk, "intclk", "snd-soc-mop500.0");
 	clk_register_clkdev(clk, NULL, "ab8500-pwm.1");

 	/* ab8500_audioclk */
 	clk = clk_reg_sysctrl_gate(dev , "audioclk", "intclk",
 		AB8500_SYSULPCLKCTRL1, AB8500_SYSULPCLKCTRL1_AUDIOCLKENA,
 		AB8500_SYSULPCLKCTRL1_AUDIOCLKENA, 0, 0);
-	clk_register_clkdev(clk, "audioclk", "ab85xx-codec.0");
+	clk_register_clkdev(clk, "audioclk", "ab8500-codec.0");

 	return 0;
 }

--- a/drivers/clk/ux500/u8540_clk.c
+++ b/drivers/clk/ux500/u8540_clk.c
--- a/drivers/clk/ux500/u9540_clk.c
+++ b/drivers/clk/ux500/u9540_clk.c
@@ -12,10 +12,10 @@
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/platform_data/clk-ux500.h>
-
 #include "clk.h"

-void u9540_clk_init(void)
+void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base)
 {
 	/* register clocks here */
 }
--- a/drivers/clk/versatile/clk-vexpress-osc.c
+++ b/drivers/clk/versatile/clk-vexpress-osc.c
@@ -107,7 +107,7 @@ void __init vexpress_osc_of_setup(struct device_node *node)
 	osc->func = vexpress_config_func_get_by_node(node);
 	if (!osc->func) {
 		pr_err("Failed to obtain config func for node '%s'!\n",
-				node->name);
+				node->full_name);
 		goto error;
 	}

@@ -119,7 +119,7 @@ void __init vexpress_osc_of_setup(struct device_node *node)

 	of_property_read_string(node, "clock-output-names", &init.name);
 	if (!init.name)
-		init.name = node->name;
+		init.name = node->full_name;

 	init.ops = &vexpress_osc_ops;
 	init.flags = CLK_IS_ROOT;

--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -480,6 +480,7 @@ struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
 	CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(BML8580CLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
 	CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),

--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -32,6 +32,7 @@
 #define PRCM_PER7CLK_MGT	(0x040)
 #define PRCM_LCDCLK_MGT		(0x044)
 #define PRCM_BMLCLK_MGT		(0x04C)
+#define PRCM_BML8580CLK_MGT	(0x108)
 #define PRCM_HSITXCLK_MGT	(0x050)
 #define PRCM_HSIRXCLK_MGT	(0x054)
 #define PRCM_HDMICLK_MGT	(0x058)

--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -210,6 +210,10 @@ void of_fixed_clk_setup(struct device_node *np);
 * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
 * 	enable the clock.  Setting this flag does the opposite: setting the bit
 * 	disable the clock and clearing it enables the clock
+ * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
+ *   of this register, and mask of gate bits are in higher 16-bit of this
+ *   register.  While setting the gate bits, higher 16-bit should also be
+ *   updated to indicate changing gate bits.
 */
 struct clk_gate {
 	struct clk_hw hw;
@@ -220,6 +224,7 @@ struct clk_gate {
 };

 #define CLK_GATE_SET_TO_DISABLE		BIT(0)
+#define CLK_GATE_HIWORD_MASK		BIT(1)

 extern const struct clk_ops clk_gate_ops;
 struct clk *clk_register_gate(struct device *dev, const char *name,
@@ -257,6 +262,10 @@ struct clk_div_table {
 *	Some hardware implementations gracefully handle this case and allow a
 *	zero divisor by not modifying their input clock
 *	(divide by one / bypass).
+ * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit
+ *   of this register, and mask of divider bits are in higher 16-bit of this
+ *   register.  While setting the divider bits, higher 16-bit should also be
+ *   updated to indicate changing divider bits.
 */
 struct clk_divider {
 	struct clk_hw	hw;
@@ -271,6 +280,7 @@ struct clk_divider {
 #define CLK_DIVIDER_ONE_BASED		BIT(0)
 #define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
 #define CLK_DIVIDER_ALLOW_ZERO		BIT(2)
+#define CLK_DIVIDER_HIWORD_MASK		BIT(3)

 extern const struct clk_ops clk_divider_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
@@ -299,6 +309,10 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
 * Flags:
 * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
+ * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
+ *   register, and mask of mux bits are in higher 16-bit of this register.
+ *   While setting the mux bits, higher 16-bit should also be updated to
+ *   indicate changing mux bits.
 */
 struct clk_mux {
 	struct clk_hw	hw;
@@ -312,6 +326,7 @@ struct clk_mux {

 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
+#define CLK_MUX_HIWORD_MASK		BIT(2)

 extern const struct clk_ops clk_mux_ops;

@@ -423,6 +438,17 @@ struct of_device_id;

 typedef void (*of_clk_init_cb_t)(struct device_node *);

+struct clk_onecell_data {
+	struct clk **clks;
+	unsigned int clk_num;
+};
+
+#define CLK_OF_DECLARE(name, compat, fn)			\
+	static const struct of_device_id __clk_of_table_##name	\
+		__used __section(__clk_of_table)		\
+		= { .compatible = compat, .data = fn };
+
+#ifdef CONFIG_OF
 int of_clk_add_provider(struct device_node *np,
 			struct clk *(*clk_src_get)(struct of_phandle_args *args,
 						   void *data),
@@ -430,19 +456,39 @@ int of_clk_add_provider(struct device_node *np,
 void of_clk_del_provider(struct device_node *np);
 struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
 				  void *data);
-struct clk_onecell_data {
-	struct clk **clks;
-	unsigned int clk_num;
-};
 struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
 const char *of_clk_get_parent_name(struct device_node *np, int index);

 void of_clk_init(const struct of_device_id *matches);

-#define CLK_OF_DECLARE(name, compat, fn)			\
-	static const struct of_device_id __clk_of_table_##name	\
-		__used __section(__clk_of_table)		\
-		= { .compatible = compat, .data = fn };
+#else /* !CONFIG_OF */

+static inline int of_clk_add_provider(struct device_node *np,
+			struct clk *(*clk_src_get)(struct of_phandle_args *args,
+						   void *data),
+			void *data)
+{
+	return 0;
+}
+#define of_clk_del_provider(np) \
+	{ while (0); }
+static inline struct clk *of_clk_src_simple_get(
+	struct of_phandle_args *clkspec, void *data)
+{
+	return ERR_PTR(-ENOENT);
+}
+static inline struct clk *of_clk_src_onecell_get(
+	struct of_phandle_args *clkspec, void *data)
+{
+	return ERR_PTR(-ENOENT);
+}
+static inline const char *of_clk_get_parent_name(struct device_node *np,
+						 int index)
+{
+	return NULL;
+}
+#define of_clk_init(matches) \
+	{ while (0); }
+#endif /* CONFIG_OF */
 #endif /* CONFIG_COMMON_CLK */
 #endif /* CLK_PROVIDER_H */
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
@@ -120,9 +120,13 @@ static inline void tegra_cpu_clock_resume(void)
 }
 #endif

+#ifdef CONFIG_ARCH_TEGRA
 void tegra_periph_reset_deassert(struct clk *c);
 void tegra_periph_reset_assert(struct clk *c);
-void tegra_clocks_init(void);
+#else
+static inline void tegra_periph_reset_deassert(struct clk *c) {}
+static inline void tegra_periph_reset_assert(struct clk *c) {}
+#endif
 void tegra_clocks_apply_init_table(void);

 #endif /* __LINUX_CLK_TEGRA_H_ */
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -278,8 +278,8 @@ struct ab8500_sysctrl_platform_data {

 #define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
 #define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
-#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
-#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL0 BIT(2)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL1 BIT(3)
 #define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
 #define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
 #define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)

--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -134,6 +134,11 @@ enum prcmu_clock {
 	PRCMU_SIACLK,
 	PRCMU_SVACLK,
 	PRCMU_ACLK,
+	PRCMU_HVACLK, /* Ux540 only */
+	PRCMU_G1CLK, /* Ux540 only */
+	PRCMU_SDMMCHCLK,
+	PRCMU_CAMCLK,
+	PRCMU_BML8580CLK,
 	PRCMU_NUM_REG_CLOCKS,
 	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
 	PRCMU_CDCLK,
@@ -148,6 +153,13 @@ enum prcmu_clock {
 	PRCMU_DSI0ESCCLK,
 	PRCMU_DSI1ESCCLK,
 	PRCMU_DSI2ESCCLK,
+	/* LCD DSI PLL - Ux540 only */
+	PRCMU_PLLDSI_LCD,
+	PRCMU_DSI0CLK_LCD,
+	PRCMU_DSI1CLK_LCD,
+	PRCMU_DSI0ESCCLK_LCD,
+	PRCMU_DSI1ESCCLK_LCD,
+	PRCMU_DSI2ESCCLK_LCD,
 };

 /**

--- a/include/linux/platform_data/clk-ux500.h
+++ b/include/linux/platform_data/clk-ux500.h
@@ -12,7 +12,9 @@

 void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
 		    u32 clkrst5_base, u32 clkrst6_base);
-void u9540_clk_init(void);
-void u8540_clk_init(void);
+void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base);
+void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
+		    u32 clkrst5_base, u32 clkrst6_base);

 #endif /* __CLK_UX500_H */
--- a/include/linux/platform_data/si5351.h
+++ b/include/linux/platform_data/si5351.h
@@ -78,6 +78,23 @@ enum si5351_drive_strength {
 	SI5351_DRIVE_8MA = 8,
 };

+/**
+ * enum si5351_disable_state - Si5351 clock output disable state
+ * @SI5351_DISABLE_DEFAULT: default, do not change eeprom config
+ * @SI5351_DISABLE_LOW: CLKx is set to a LOW state when disabled
+ * @SI5351_DISABLE_HIGH: CLKx is set to a HIGH state when disabled
+ * @SI5351_DISABLE_FLOATING: CLKx is set to a FLOATING state when
+ *				disabled
+ * @SI5351_DISABLE_NEVER: CLKx is NEVER disabled
+ */
+enum si5351_disable_state {
+	SI5351_DISABLE_DEFAULT = 0,
+	SI5351_DISABLE_LOW,
+	SI5351_DISABLE_HIGH,
+	SI5351_DISABLE_FLOATING,
+	SI5351_DISABLE_NEVER,
+};
+
 /**
 * struct si5351_clkout_config - Si5351 clock output configuration
 * @clkout: clkout number
@@ -91,6 +108,7 @@ struct si5351_clkout_config {
 	enum si5351_multisynth_src multisynth_src;
 	enum si5351_clkout_src clkout_src;
 	enum si5351_drive_strength drive;
+	enum si5351_disable_state disable_state;
 	bool pll_master;
 	unsigned long rate;
 };