Commit 9236d838 authored by Luis R. Rodriguez's avatar Luis R. Rodriguez Committed by John W. Linville

cfg80211: fix extension channel checks to initiate communication

When operating in a mode that initiates communication and using
HT40 we should fail if we cannot use both primary and secondary
channels to initiate communication. Our current ht40 allowmap
only covers STA mode of operation, for beaconing modes we need
a check on the fly as the mode of operation is dynamic and
there other flags other than disable which we should read
to check if we can initiate communication.

Do not allow for initiating communication if our secondary HT40
channel has is either disabled, has a passive scan flag, a
no-ibss flag or is a radar channel. Userspace now has similar
checks but this is also needed in-kernel.
Reported-by: default avatarJouni Malinen <jouni.malinen@atheros.com>
Cc: stable@kernel.org
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent b5261cf4
...@@ -44,6 +44,36 @@ rdev_freq_to_chan(struct cfg80211_registered_device *rdev, ...@@ -44,6 +44,36 @@ rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
return chan; return chan;
} }
static bool can_beacon_sec_chan(struct wiphy *wiphy,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type)
{
struct ieee80211_channel *sec_chan;
int diff;
switch (channel_type) {
case NL80211_CHAN_HT40PLUS:
diff = 20;
case NL80211_CHAN_HT40MINUS:
diff = -20;
default:
return false;
}
sec_chan = ieee80211_get_channel(wiphy, chan->center_freq + diff);
if (!sec_chan)
return false;
/* we'll need a DFS capability later */
if (sec_chan->flags & (IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_IBSS |
IEEE80211_CHAN_RADAR))
return false;
return true;
}
int cfg80211_set_freq(struct cfg80211_registered_device *rdev, int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev, int freq, struct wireless_dev *wdev, int freq,
enum nl80211_channel_type channel_type) enum nl80211_channel_type channel_type)
...@@ -68,6 +98,28 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev, ...@@ -68,6 +98,28 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
if (!chan) if (!chan)
return -EINVAL; return -EINVAL;
/* Both channels should be able to initiate communication */
if (wdev && (wdev->iftype == NL80211_IFTYPE_ADHOC ||
wdev->iftype == NL80211_IFTYPE_AP ||
wdev->iftype == NL80211_IFTYPE_AP_VLAN ||
wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
switch (channel_type) {
case NL80211_CHAN_HT40PLUS:
case NL80211_CHAN_HT40MINUS:
if (!can_beacon_sec_chan(&rdev->wiphy, chan,
channel_type)) {
printk(KERN_DEBUG
"cfg80211: Secondary channel not "
"allowed to initiate communication\n");
return -EINVAL;
}
break;
default:
break;
}
}
result = rdev->ops->set_channel(&rdev->wiphy, result = rdev->ops->set_channel(&rdev->wiphy,
wdev ? wdev->netdev : NULL, wdev ? wdev->netdev : NULL,
chan, channel_type); chan, channel_type);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment