Commit 928487a1 authored by Olof Johansson's avatar Olof Johansson

Merge branch 'samsung/cleanup' into next/cleanup

From Kukjin Kim:

Here, there are cleanup patches for Samsung v3.7 and most of them are
related to cleanup Samsung specific gpio API.

* samsung/cleanup:
  gpio: samsung: Update documentation
  ARM: S3C24XX: Use module_platform_driver macro in mach-osiris-dvs.c
  ARM: S3C24XX: Use module_platform_driver macro in h1940-bluetooth.c
  gpio-samsung: Remove now unused s3c2410_gpio* API
  ARM: S3C24XX: Remove obsolete GPIO API declarations
  ARM: S3C24XX: Convert users of s3c2410_gpio_setpin to gpiolib API
  ARM: EXYNOS: cleanup unused code related to GPS
parents 2203747c 98025c8c
S3C2410 GPIO Control
S3C24XX GPIO Control
====================
Introduction
......@@ -12,7 +12,7 @@ Introduction
of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list.
See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
See Documentation/arm/Samsung/GPIO.txt for the core implementation.
GPIOLIB
......@@ -41,8 +41,8 @@ GPIOLIB
GPIOLIB conversion
------------------
If you need to convert your board or driver to use gpiolib from the exiting
s3c2410 api, then here are some notes on the process.
If you need to convert your board or driver to use gpiolib from the phased
out s3c2410 API, then here are some notes on the process.
1) If your board is exclusively using an GPIO, say to control peripheral
power, then it will require to claim the gpio with gpio_request() before
......@@ -55,7 +55,7 @@ s3c2410 api, then here are some notes on the process.
as they have the same arguments, and can either take the pin specific
values, or the more generic special-function-number arguments.
3) s3c2410_gpio_pullup() changs have the problem that whilst the
3) s3c2410_gpio_pullup() changes have the problem that whilst the
s3c2410_gpio_pullup(x, 1) can be easily translated to the
s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
are not so easy.
......@@ -74,7 +74,7 @@ s3c2410 api, then here are some notes on the process.
when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
would return the value the pin is supposed to be outputting).
6) s3c2410_gpio_getirq() should be directly replacable with the
6) s3c2410_gpio_getirq() should be directly replaceable with the
gpio_to_irq() call.
The s3c2410_gpio and gpio_ calls have always operated on the same gpio
......@@ -105,7 +105,7 @@ PIN Numbers
-----------
Each pin has an unique number associated with it in regs-gpio.h,
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
With the conversion to gpiolib, there is no longer a direct conversion
......@@ -120,31 +120,27 @@ Configuring a pin
The following function allows the configuration of a given pin to
be changed.
void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
Eg:
e.g.:
s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
The s3c_gpio_cfgpin() call is a functional replacement for this call.
Reading the current configuration
---------------------------------
The current configuration of a pin can be read by using:
The current configuration of a pin can be read by using standard
gpiolib function:
s3c2410_gpio_getcfg(unsigned int pin);
s3c_gpio_getcfg(unsigned int pin);
The return value will be from the same set of values which can be
passed to s3c2410_gpio_cfgpin().
The s3c_gpio_getcfg() call should be a functional replacement for
this call.
passed to s3c_gpio_cfgpin().
Configuring a pull-up resistor
......@@ -154,61 +150,33 @@ Configuring a pull-up resistor
pull-up resistors enabled. This can be configured by the following
function:
void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
Where the to value is zero to set the pull-up off, and 1 to enable
the specified pull-up. Any other values are currently undefined.
The s3c_gpio_setpull() offers similar functionality, but with the
ability to encode whether the pull is up or down. Currently there
is no 'just on' state, so up or down must be selected.
Getting the state of a PIN
--------------------------
The state of a pin can be read by using the function:
unsigned int s3c2410_gpio_getpin(unsigned int pin);
void s3c_gpio_setpull(unsigned int pin, unsigned int to);
This will return either zero or non-zero. Do not count on this
function returning 1 if the pin is set.
Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
values are currently undefined.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Setting the state of a PIN
--------------------------
The value an pin is outputing can be modified by using the following:
void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
Getting and setting the state of a PIN
--------------------------------------
Which sets the given pin to the value. Use 0 to write 0, and 1 to
set the output to 1.
This call is now implemented by the relevant gpiolib calls, convert
These calls are now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Getting the IRQ number associated with a PIN
--------------------------------------------
The following function can map the given pin number to an IRQ
A standard gpiolib function can map the given pin number to an IRQ
number to pass to the IRQ system.
int s3c2410_gpio_getirq(unsigned int pin);
int gpio_to_irq(unsigned int pin);
Note, not all pins have an IRQ.
This call is now implemented by the relevant gpiolib calls, convert
your board or driver to use gpiolib.
Authour
Author
-------
Ben Dooks, 03 October 2004
Copyright 2004 Ben Dooks, Simtec Electronics
......@@ -5,14 +5,14 @@ Introduction
------------
This outlines the Samsung GPIO implementation and the architecture
specific calls provided alongisde the drivers/gpio core.
specific calls provided alongside the drivers/gpio core.
S3C24XX (Legacy)
----------------
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
about these devices. Their implementation is being brought into line
about these devices. Their implementation has been brought into line
with the core samsung implementation described in this document.
......@@ -29,7 +29,7 @@ GPIO numbering is synchronised between the Samsung and gpiolib system.
PIN configuration
-----------------
Pin configuration is specific to the Samsung architecutre, with each SoC
Pin configuration is specific to the Samsung architecture, with each SoC
registering the necessary information for the core gpio configuration
implementation to configure pins as necessary.
......@@ -38,5 +38,3 @@ driver or machine to change gpio configuration.
See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
on these functions.
......@@ -166,11 +166,6 @@ static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
}
static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
}
static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
......@@ -671,10 +666,6 @@ static struct clk exynos5_init_clocks_off[] = {
.name = "usbotg",
.enable = exynos5_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "gps",
.enable = exynos5_clk_ip_gps_ctrl,
.ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)),
}, {
.name = "nfcon",
.enable = exynos5_clk_ip_fsys_ctrl,
......
......@@ -131,7 +131,6 @@
#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000
#define EXYNOS5_PA_SYSMMU_IOP 0x12360000
#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000
#define EXYNOS5_PA_SYSMMU_GPS 0x12630000
#define EXYNOS5_PA_SYSMMU_ISP 0x13260000
#define EXYNOS5_PA_SYSMMU_DRC 0x12370000
#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000
......
......@@ -138,19 +138,7 @@ static struct platform_driver h1940bt_driver = {
.remove = h1940bt_remove,
};
static int __init h1940bt_init(void)
{
return platform_driver_register(&h1940bt_driver);
}
static void __exit h1940bt_exit(void)
{
platform_driver_unregister(&h1940bt_driver);
}
module_init(h1940bt_init);
module_exit(h1940bt_exit);
module_platform_driver(h1940bt_driver);
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
......
......@@ -424,7 +424,8 @@ static void __init anubis_map_io(void)
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPA(0));
}
}
......
......@@ -512,8 +512,8 @@ static void jive_power_off(void)
{
printk(KERN_INFO "powering system down...\n");
s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPC(5));
}
static void __init jive_machine_init(void)
......@@ -623,11 +623,11 @@ static void __init jive_machine_init(void)
gpio_request(S3C2410_GPB(7), "jive spi");
gpio_direction_output(S3C2410_GPB(7), 1);
s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
gpio_free(S3C2410_GPB(6));
s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
gpio_request_one(S3C2410_GPG(8), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPG(8));
/* initialise the WM8750 spi */
......
......@@ -638,9 +638,9 @@ static void __init mini2440_init(void)
gpio_free(S3C2410_GPG(4));
/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
gpio_free(S3C2410_GPB(1));
/* mark the key as input, without pullups (there is one on the board) */
for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
......
......@@ -119,17 +119,17 @@ static struct platform_device *nexcoder_devices[] __initdata = {
static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
// Power up the sensor board
s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
/* Initialize SCCB bus */
gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPE(14)); /* IICSCL */
gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPE(15)); /* IICSDA */
/* Power up the sensor board */
gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
}
static void __init nexcoder_map_io(void)
......
......@@ -175,18 +175,7 @@ static struct platform_driver osiris_dvs_driver = {
},
};
static int __init osiris_dvs_init(void)
{
return platform_driver_register(&osiris_dvs_driver);
}
static void __exit osiris_dvs_exit(void)
{
platform_driver_unregister(&osiris_dvs_driver);
}
module_init(osiris_dvs_init);
module_exit(osiris_dvs_exit);
module_platform_driver(osiris_dvs_driver);
MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
......
......@@ -274,8 +274,8 @@ static int osiris_pm_suspend(void)
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPA(21));
return 0;
}
......@@ -396,7 +396,8 @@ static void __init osiris_map_io(void)
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
gpio_free(S3C2410_GPA(0));
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
......
/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
*
* Copyright (c) 2003-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - hardware
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MACH_GPIO_FNS_H
#define __MACH_GPIO_FNS_H __FILE__
/* These functions are in the to-be-removed category and it is strongly
* encouraged not to use these in new code. They will be marked deprecated
* very soon.
*
* Most of the functionality can be either replaced by the gpiocfg calls
* for the s3c platform or by the generic GPIOlib API.
*
* As of 2.6.35-rc, these will be removed, with the few drivers using them
* either replaced or given a wrapper until the calls can be removed.
*/
#include <plat/gpio-cfg.h>
static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
{
/* 1:1 mapping between cfgpin and setcfg calls at the moment */
s3c_gpio_cfgpin(pin, cfg);
}
/* external functions for GPIO support
*
* These allow various different clients to access the same GPIO
* registers without conflicting. If your driver only owns the entire
* GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
*/
extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
/* s3c2410_gpio_getirq
*
* turn the given pin number into the corresponding IRQ number
*
* returns:
* < 0 = no interrupt for this pin
* >=0 = interrupt number for the pin
*/
extern int s3c2410_gpio_getirq(unsigned int pin);
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
*
* on = 0 => disable filtering
* 1 => enable filtering
*
* config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
* width of filter (0 through 63)
*
*
*/
extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned int config);
/* s3c2410_gpio_pullup
*
* This call should be replaced with s3c_gpio_setpull().
*
* As a note, there is currently no distinction between pull-up and pull-down
* in the s3c24xx series devices with only an on/off configuration.
*/
/* s3c2410_gpio_pullup
*
* configure the pull-up control on the given pin
*
* to = 1 => disable the pull-up
* 0 => enable the pull-up
*
* eg;
*
* s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
* s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
*/
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
#endif /* __MACH_GPIO_FNS_H */
......@@ -3131,46 +3131,6 @@ samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
}
EXPORT_SYMBOL(s3c_gpio_getpull);
/* gpiolib wrappers until these are totally eliminated */
void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
{
int ret;
WARN_ON(to); /* should be none of these left */
if (!to) {
/* if pull is enabled, try first with up, and if that
* fails, try using down */
ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
if (ret)
s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
} else {
s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
}
}
EXPORT_SYMBOL(s3c2410_gpio_pullup);
void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
{
/* do this via gpiolib until all users removed */
gpio_request(pin, "temporary");
gpio_set_value(pin, to);
gpio_free(pin);
}
EXPORT_SYMBOL(s3c2410_gpio_setpin);
unsigned int s3c2410_gpio_getpin(unsigned int pin)
{
struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
unsigned long offs = pin - chip->chip.base;
return __raw_readl(chip->base + 0x04) & (1 << offs);
}
EXPORT_SYMBOL(s3c2410_gpio_getpin);
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment