Commit 92dea7c0 authored by David S. Miller's avatar David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
This series contains updates to ixgbe, igb and pci.

The ixgbe changes contains a fix to a possible divide by zero by bailing
out of the ixgbe_update_itr() function if the last interrupt timeslice is
zero.  In addition, support is added for the new OCP x520 adapter as well
as LX support for 82599 devices.  Jacob provides a patch to change
variable wol_supported to wol_enabled to better reflect what the code
is actually doing (i.e. checking if WoL is enabled).

Alex adds SRIOV helper function to pci that will determine if a PF
has any VFs that are currently assigned to a guest.

The remaining 8 patches are against igb and contain the following changes:
* implement SERDES loopback configuration for i210 devices by unsetting
  sigdetect bit, so as to fix Ethtool loopback test failure
* add support for the SMBI semaphore for I210/I211 devices
* implement the new generic pci_vfs_assigned helper function (Alex's PCI
  helper function)
* display warning when link speed is downgraded due to Smartspeed
* ensure that VLAN hardware filtering remains enabled when the device is
  in promiscuous mode and VT mode simultaneously
* cleanup dead code in igb
* bump the driver version

v2: updated the PCI patch to add SRIOV helper function to remove extern
    from the declaration of pci_vfs_assigned in pci.h and return 0 if
    SR-IOV is disabled which is inline with other PCI SR-IOV functions
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents d3734b04 67b1b903
......@@ -389,6 +389,9 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
dev_spec->eee_disable = false;
else
dev_spec->eee_disable = true;
/* Allow a single clear of the SW semaphore on I210 and newer */
if (mac->type >= e1000_i210)
dev_spec->clear_semaphore_once = true;
/* physical interface link setup */
mac->ops.setup_physical_interface =
(hw->phy.media_type == e1000_media_type_copper)
......@@ -440,8 +443,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
mac->type = e1000_i350;
break;
case E1000_DEV_ID_I210_COPPER:
case E1000_DEV_ID_I210_COPPER_OEM1:
case E1000_DEV_ID_I210_COPPER_IT:
case E1000_DEV_ID_I210_FIBER:
case E1000_DEV_ID_I210_SERDES:
case E1000_DEV_ID_I210_SGMII:
......@@ -2049,10 +2050,6 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw)
hw_dbg("Auto Read Done did not complete\n");
}
/* If EEPROM is not present, run manual init scripts */
if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
igb_reset_init_script_82575(hw);
/* clear global device reset status bit */
wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
......
......@@ -64,8 +64,6 @@ struct e1000_hw;
#define E1000_DEV_ID_I350_SERDES 0x1523
#define E1000_DEV_ID_I350_SGMII 0x1524
#define E1000_DEV_ID_I210_COPPER 0x1533
#define E1000_DEV_ID_I210_COPPER_OEM1 0x1534
#define E1000_DEV_ID_I210_COPPER_IT 0x1535
#define E1000_DEV_ID_I210_FIBER 0x1536
#define E1000_DEV_ID_I210_SERDES 0x1537
#define E1000_DEV_ID_I210_SGMII 0x1538
......@@ -529,6 +527,7 @@ struct e1000_dev_spec_82575 {
bool sgmii_active;
bool global_device_reset;
bool eee_disable;
bool clear_semaphore_once;
};
struct e1000_hw {
......
......@@ -44,10 +44,42 @@
static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
{
u32 swsm;
s32 ret_val = E1000_SUCCESS;
s32 timeout = hw->nvm.word_size + 1;
s32 i = 0;
/* Get the SW semaphore */
while (i < timeout) {
swsm = rd32(E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
udelay(50);
i++;
}
if (i == timeout) {
/* In rare circumstances, the SW semaphore may already be held
* unintentionally. Clear the semaphore once before giving up.
*/
if (hw->dev_spec._82575.clear_semaphore_once) {
hw->dev_spec._82575.clear_semaphore_once = false;
igb_put_hw_semaphore(hw);
for (i = 0; i < timeout; i++) {
swsm = rd32(E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
udelay(50);
}
}
/* If we do not have the semaphore here, we have to give up. */
if (i == timeout) {
hw_dbg("Driver can't access device - SMBI bit is set.\n");
return -E1000_ERR_NVM;
}
}
/* Get the FW semaphore. */
for (i = 0; i < timeout; i++) {
swsm = rd32(E1000_SWSM);
......@@ -64,12 +96,10 @@ static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
/* Release semaphores */
igb_put_hw_semaphore(hw);
hw_dbg("Driver can't access the NVM\n");
ret_val = -E1000_ERR_NVM;
goto out;
return -E1000_ERR_NVM;
}
out:
return ret_val;
return E1000_SUCCESS;
}
/**
......@@ -98,23 +128,6 @@ void igb_release_nvm_i210(struct e1000_hw *hw)
igb_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
}
/**
* igb_put_hw_semaphore_i210 - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
**/
static void igb_put_hw_semaphore_i210(struct e1000_hw *hw)
{
u32 swsm;
swsm = rd32(E1000_SWSM);
swsm &= ~E1000_SWSM_SWESMBI;
wr32(E1000_SWSM, swsm);
}
/**
* igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
......@@ -138,11 +151,11 @@ s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
}
swfw_sync = rd32(E1000_SW_FW_SYNC);
if (!(swfw_sync & fwmask))
if (!(swfw_sync & (fwmask | swmask)))
break;
/* Firmware currently using resource (fwmask) */
igb_put_hw_semaphore_i210(hw);
igb_put_hw_semaphore(hw);
mdelay(5);
i++;
}
......@@ -156,7 +169,7 @@ s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
swfw_sync |= swmask;
wr32(E1000_SW_FW_SYNC, swfw_sync);
igb_put_hw_semaphore_i210(hw);
igb_put_hw_semaphore(hw);
out:
return ret_val;
}
......@@ -180,7 +193,7 @@ void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
swfw_sync &= ~mask;
wr32(E1000_SW_FW_SYNC, swfw_sync);
igb_put_hw_semaphore_i210(hw);
igb_put_hw_semaphore(hw);
}
/**
......
......@@ -1678,17 +1678,12 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter)
wr32(E1000_CONNSW, reg);
/* Unset sigdetect for SERDES loopback on
* 82580 and i350 devices.
* 82580 and newer devices.
*/
switch (hw->mac.type) {
case e1000_82580:
case e1000_i350:
if (hw->mac.type >= e1000_82580) {
reg = rd32(E1000_PCS_CFG0);
reg |= E1000_PCS_CFG_IGN_SD;
wr32(E1000_PCS_CFG0, reg);
break;
default:
break;
}
/* Set PCS register for forced speed */
......
......@@ -60,9 +60,9 @@
#include <linux/i2c.h>
#include "igb.h"
#define MAJ 4
#define MIN 1
#define BUILD 2
#define MAJ 5
#define MIN 0
#define BUILD 3
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
__stringify(BUILD) "-k"
char igb_driver_name[] = "igb";
......@@ -180,7 +180,6 @@ static void igb_check_vf_rate_limit(struct igb_adapter *);
#ifdef CONFIG_PCI_IOV
static int igb_vf_configure(struct igb_adapter *adapter, int vf);
static bool igb_vfs_are_assigned(struct igb_adapter *adapter);
#endif
#ifdef CONFIG_PM
......@@ -2402,7 +2401,7 @@ static int igb_disable_sriov(struct pci_dev *pdev)
/* reclaim resources allocated to VFs */
if (adapter->vf_data) {
/* disable iov and allow time for transactions to clear */
if (igb_vfs_are_assigned(adapter)) {
if (pci_vfs_assigned(pdev)) {
dev_warn(&pdev->dev,
"Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
return -EPERM;
......@@ -3737,6 +3736,10 @@ static void igb_set_rx_mode(struct net_device *netdev)
rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
if (netdev->flags & IFF_PROMISC) {
u32 mrqc = rd32(E1000_MRQC);
/* retain VLAN HW filtering if in VT mode */
if (mrqc & E1000_MRQC_ENABLE_VMDQ)
rctl |= E1000_RCTL_VFE;
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
} else {
......@@ -3902,6 +3905,7 @@ static void igb_watchdog_task(struct work_struct *work)
struct igb_adapter,
watchdog_task);
struct e1000_hw *hw = &adapter->hw;
struct e1000_phy_info *phy = &hw->phy;
struct net_device *netdev = adapter->netdev;
u32 link;
int i;
......@@ -3930,6 +3934,11 @@ static void igb_watchdog_task(struct work_struct *work)
(ctrl & E1000_CTRL_RFCE) ? "RX" :
(ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
/* check if SmartSpeed worked */
igb_check_downshift(hw);
if (phy->speed_downgraded)
netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n");
/* check for thermal sensor event */
if (igb_thermal_sensor_event(hw,
E1000_THSTAT_LINK_THROTTLE)) {
......@@ -5242,39 +5251,6 @@ static int igb_vf_configure(struct igb_adapter *adapter, int vf)
return 0;
}
static bool igb_vfs_are_assigned(struct igb_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct pci_dev *vfdev;
int dev_id;
switch (adapter->hw.mac.type) {
case e1000_82576:
dev_id = IGB_82576_VF_DEV_ID;
break;
case e1000_i350:
dev_id = IGB_I350_VF_DEV_ID;
break;
default:
return false;
}
/* loop through all the VFs to see if we own any that are assigned */
vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL);
while (vfdev) {
/* if we don't own it we don't care */
if (vfdev->is_virtfn && vfdev->physfn == pdev) {
/* if it is assigned we cannot release it */
if (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED)
return true;
}
vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, vfdev);
}
return false;
}
#endif
static void igb_ping_all_vfs(struct igb_adapter *adapter)
{
......@@ -5548,12 +5524,75 @@ static int igb_ndo_set_vf_vlan(struct net_device *netdev,
return err;
}
static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid)
{
struct e1000_hw *hw = &adapter->hw;
int i;
u32 reg;
/* Find the vlan filter for this id */
for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
reg = rd32(E1000_VLVF(i));
if ((reg & E1000_VLVF_VLANID_ENABLE) &&
vid == (reg & E1000_VLVF_VLANID_MASK))
break;
}
if (i >= E1000_VLVF_ARRAY_SIZE)
i = -1;
return i;
}
static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
{
struct e1000_hw *hw = &adapter->hw;
int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
int err = 0;
/* If in promiscuous mode we need to make sure the PF also has
* the VLAN filter set.
*/
if (add && (adapter->netdev->flags & IFF_PROMISC))
err = igb_vlvf_set(adapter, vid, add,
adapter->vfs_allocated_count);
if (err)
goto out;
return igb_vlvf_set(adapter, vid, add, vf);
err = igb_vlvf_set(adapter, vid, add, vf);
if (err)
goto out;
/* Go through all the checks to see if the VLAN filter should
* be wiped completely.
*/
if (!add && (adapter->netdev->flags & IFF_PROMISC)) {
u32 vlvf, bits;
int regndx = igb_find_vlvf_entry(adapter, vid);
if (regndx < 0)
goto out;
/* See if any other pools are set for this VLAN filter
* entry other than the PF.
*/
vlvf = bits = rd32(E1000_VLVF(regndx));
bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT +
adapter->vfs_allocated_count);
/* If the filter was removed then ensure PF pool bit
* is cleared if the PF only added itself to the pool
* because the PF is in promiscuous mode.
*/
if ((vlvf & VLAN_VID_MASK) == vid &&
!test_bit(vid, adapter->active_vlans) &&
!bits)
igb_vlvf_set(adapter, vid, add,
adapter->vfs_allocated_count);
}
out:
return err;
}
static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
......
......@@ -266,6 +266,8 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
/* Determine 1G link capabilities off of SFP+ type */
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
......@@ -1055,7 +1057,7 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
* LMS state either.
*/
if ((hw->phy.multispeed_fiber && hw->mng_fw_enabled) ||
hw->wol_supported)
hw->wol_enabled)
hw->mac.orig_autoc =
(hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
curr_lms;
......
......@@ -231,6 +231,10 @@ static int ixgbe_get_settings(struct net_device *netdev,
case ixgbe_sfp_type_lr:
case ixgbe_sfp_type_srlr_core0:
case ixgbe_sfp_type_srlr_core1:
case ixgbe_sfp_type_1g_sx_core0:
case ixgbe_sfp_type_1g_sx_core1:
case ixgbe_sfp_type_1g_lx_core0:
case ixgbe_sfp_type_1g_lx_core1:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
......@@ -246,12 +250,6 @@ static int ixgbe_get_settings(struct net_device *netdev,
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
break;
case ixgbe_sfp_type_1g_sx_core0:
case ixgbe_sfp_type_1g_sx_core1:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
break;
case ixgbe_sfp_type_unknown:
default:
ecmd->supported |= SUPPORTED_FIBRE;
......
......@@ -2095,6 +2095,9 @@ static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector,
*/
/* what was last interrupt timeslice? */
timepassed_us = q_vector->itr >> 2;
if (timepassed_us == 0)
return;
bytes_perint = bytes / timepassed_us; /* bytes/usec */
switch (itr_setting) {
......@@ -7205,6 +7208,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
/* only support first port */
if (hw->bus.func != 0)
break;
case IXGBE_SUBDEV_ID_82599_SP_560FLR:
case IXGBE_SUBDEV_ID_82599_SFP:
case IXGBE_SUBDEV_ID_82599_RNDC:
case IXGBE_SUBDEV_ID_82599_ECNA_DP:
......@@ -7213,6 +7217,14 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
break;
}
break;
case IXGBE_DEV_ID_82599EN_SFP:
/* Only this subdevice supports WOL */
switch (subdevice_id) {
case IXGBE_SUBDEV_ID_82599EN_SFP_OCP1:
is_wol_supported = 1;
break;
}
break;
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
/* All except this subdevice support WOL */
if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
......@@ -7529,9 +7541,9 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* WOL not supported for all devices */
adapter->wol = 0;
hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
hw->wol_supported = ixgbe_wol_supported(adapter, pdev->device,
hw->wol_enabled = ixgbe_wol_supported(adapter, pdev->device,
pdev->subsystem_device);
if (hw->wol_supported)
if (hw->wol_enabled)
adapter->wol = IXGBE_WUFC_MAG;
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
......
......@@ -956,6 +956,13 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
else
hw->phy.sfp_type =
ixgbe_sfp_type_1g_sx_core1;
} else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
if (hw->bus.lan_id == 0)
hw->phy.sfp_type =
ixgbe_sfp_type_1g_lx_core0;
else
hw->phy.sfp_type =
ixgbe_sfp_type_1g_lx_core1;
} else {
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
}
......@@ -1043,6 +1050,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
if (comp_codes_10g == 0 &&
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
hw->phy.type = ixgbe_phy_sfp_unsupported;
......@@ -1058,10 +1067,12 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
hw->mac.ops.get_device_caps(hw, &enforce_sfp);
if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
!((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) ||
(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) ||
(hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0) ||
(hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1))) {
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
/* Make sure we're a supported PHY type */
if (hw->phy.type == ixgbe_phy_sfp_intel) {
status = 0;
......@@ -1125,10 +1136,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
* SR modules
*/
if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
sfp_type == ixgbe_sfp_type_1g_sx_core0)
sfp_type = ixgbe_sfp_type_srlr_core0;
else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
sfp_type == ixgbe_sfp_type_1g_sx_core1)
sfp_type = ixgbe_sfp_type_srlr_core1;
......
......@@ -56,11 +56,13 @@
#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9
#define IXGBE_SUBDEV_ID_82599_RNDC 0x1F72
#define IXGBE_SUBDEV_ID_82599_560FLR 0x17D0
#define IXGBE_SUBDEV_ID_82599_SP_560FLR 0x211B
#define IXGBE_SUBDEV_ID_82599_ECNA_DP 0x0470
#define IXGBE_SUBDEV_ID_82599_LOM_SFP 0x8976
#define IXGBE_DEV_ID_82599_SFP_EM 0x1507
#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D
#define IXGBE_DEV_ID_82599EN_SFP 0x1557
#define IXGBE_SUBDEV_ID_82599EN_SFP_OCP1 0x0001
#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C
......@@ -2610,6 +2612,8 @@ enum ixgbe_sfp_type {
ixgbe_sfp_type_1g_cu_core1 = 10,
ixgbe_sfp_type_1g_sx_core0 = 11,
ixgbe_sfp_type_1g_sx_core1 = 12,
ixgbe_sfp_type_1g_lx_core0 = 13,
ixgbe_sfp_type_1g_lx_core1 = 14,
ixgbe_sfp_type_not_present = 0xFFFE,
ixgbe_sfp_type_unknown = 0xFFFF
};
......@@ -2999,7 +3003,7 @@ struct ixgbe_hw {
bool force_full_reset;
bool allow_unsupported_sfp;
bool mng_fw_enabled;
bool wol_supported;
bool wol_enabled;
};
struct ixgbe_info {
......
......@@ -728,6 +728,47 @@ int pci_num_vf(struct pci_dev *dev)
}
EXPORT_SYMBOL_GPL(pci_num_vf);
/**
* pci_vfs_assigned - returns number of VFs are assigned to a guest
* @dev: the PCI device
*
* Returns number of VFs belonging to this device that are assigned to a guest.
* If device is not a physical function returns -ENODEV.
*/
int pci_vfs_assigned(struct pci_dev *dev)
{
struct pci_dev *vfdev;
unsigned int vfs_assigned = 0;
unsigned short dev_id;
/* only search if we are a PF */
if (!dev->is_physfn)
return 0;
/*
* determine the device ID for the VFs, the vendor ID will be the
* same as the PF so there is no need to check for that one
*/
pci_read_config_word(dev, dev->sriov->pos + PCI_SRIOV_VF_DID, &dev_id);
/* loop through all the VFs to see if we own any that are assigned */
vfdev = pci_get_device(dev->vendor, dev_id, NULL);
while (vfdev) {
/*
* It is considered assigned if it is a virtual function with
* our dev as the physical function and the assigned bit is set
*/
if (vfdev->is_virtfn && (vfdev->physfn == dev) &&
(vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED))
vfs_assigned++;
vfdev = pci_get_device(dev->vendor, dev_id, vfdev);
}
return vfs_assigned;
}
EXPORT_SYMBOL_GPL(pci_vfs_assigned);
/**
* pci_sriov_set_totalvfs -- reduce the TotalVFs available
* @dev: the PCI PF device
......
......@@ -1644,6 +1644,7 @@ extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
extern void pci_disable_sriov(struct pci_dev *dev);
extern irqreturn_t pci_sriov_migration(struct pci_dev *dev);
extern int pci_num_vf(struct pci_dev *dev);
int pci_vfs_assigned(struct pci_dev *dev);
extern int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
extern int pci_sriov_get_totalvfs(struct pci_dev *dev);
#else
......@@ -1662,6 +1663,10 @@ static inline int pci_num_vf(struct pci_dev *dev)
{
return 0;
}
static inline int pci_vfs_assigned(struct pci_dev *dev)
{
return 0;
}
static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
{
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment