Commit 92e21616 authored by Chaitanya Hazarey's avatar Chaitanya Hazarey Committed by Greg Kroah-Hartman

Staging: rtl8192u: r8192U_core.c Converted some C99 comments to fix code-style errors

Converted some C99 warnings to fix the following error:

ERROR: trailing statements should be on next line
Signed-off-by: default avatarChaitanya Hazarey <c@24.io>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f93b4685
......@@ -1433,7 +1433,7 @@ static void rtl8192_update_cap(struct net_device *dev, u16 cap)
if (net->mode & (IEEE_G|IEEE_N_24G)) {
u8 slot_time = 0;
if ((cap & WLAN_CAPABILITY_SHORT_SLOT) && (!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime)) //short slot time
if ((cap & WLAN_CAPABILITY_SHORT_SLOT) && (!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime)) /* short slot time */
slot_time = SHORT_SLOT_TIME;
else //long slot time
slot_time = NON_SHORT_SLOT_TIME;
......@@ -1500,11 +1500,11 @@ u16 ComputeTxTime(u16 FrameLength, u16 DataRate, u8 bManagementFrame,
if (rtl8192_IsWirelessBMode(DataRate))
{
if (bManagementFrame || !bShortPreamble || DataRate == 10) // long preamble
if (bManagementFrame || !bShortPreamble || DataRate == 10) /* long preamble */
FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10)));
else // Short preamble
FrameTime = (u16)(72+24+(FrameLength*8/(DataRate/10)));
if ((FrameLength*8 % (DataRate/10)) != 0) //Get the Ceilling
if ((FrameLength*8 % (DataRate/10)) != 0) /* Get the Ceilling */
FrameTime++;
} else { //802.11g DSSS-OFDM PLCP length field calculation.
N_DBPS = N_DBPSOfRate(DataRate);
......@@ -1827,7 +1827,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
if (tcb_desc->bAMPDUEnable) //AMPDU enabled
if (tcb_desc->bAMPDUEnable) /* AMPDU enabled */
{
tx_fwinfo->AllowAggregation = 1;
/* DWORD 1 */
......@@ -2314,7 +2314,7 @@ void rtl8192_update_ratr_table(struct net_device *dev)
break;
case IEEE_N_24G:
case IEEE_N_5G:
if (ieee->pHTInfo->PeerMimoPs == 0) //MIMO_PS_STATIC
if (ieee->pHTInfo->PeerMimoPs == 0) /* MIMO_PS_STATIC */
{
ratr_value &= 0x0007F007;
} else {
......@@ -2699,7 +2699,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
else
priv->EEPROM_Def_Ver = 1;
RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
if (priv->EEPROM_Def_Ver == 0) //old eeprom definition
if (priv->EEPROM_Def_Ver == 0) /* old eeprom definition */
{
int i;
if (bLoad_From_EEPOM)
......@@ -3111,14 +3111,14 @@ static bool rtl8192_adapter_start(struct net_device *dev)
//
#ifdef TO_DO_LIST
if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
if (pMgntInfo->RegRfOff == TRUE) // User disable RF via registry.
if (pMgntInfo->RegRfOff == TRUE) /* User disable RF via registry. */
{
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
// Those actions will be discard in MgntActSet_RF_State because of the same state
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
} else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) // H/W or S/W RF OFF before sleep.
} else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) /* H/W or S/W RF OFF before sleep. */
{
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
......@@ -3647,7 +3647,7 @@ void rtl819x_watchdog_wqcallback(struct work_struct *work)
}
if ((priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET &&
(priv->bForcedSilentReset ||
(!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
(!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) /* This is control by OID set in Pomelo */
{
RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
rtl819x_ifsilentreset(dev);
......@@ -4209,7 +4209,7 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
if (priv->undecorated_smoothed_pwdb < 0) // initialize
if (priv->undecorated_smoothed_pwdb < 0) /* initialize */
priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll;
if (pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb) {
priv->undecorated_smoothed_pwdb =
......@@ -4252,10 +4252,10 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
// <2> Showed on UI for engineering
if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA)
{
for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) // 2 spatial stream
for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) /* 2 spatial stream */
{
if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) {
if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) // initialize
if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) /* initialize */
priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream];
priv->stats.rx_evm_percentage[nspatial_stream] =
((priv->stats.rx_evm_percentage[nspatial_stream]* (Rx_Smooth_Factor-1)) +
......@@ -4550,7 +4550,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
rx_evmX /= 2; //dbm
evm = rtl819x_evm_dbtopercentage(rx_evmX);
if (i == 0) // Fill value in RFD, Get the first spatial stream only
if (i == 0) /* Fill value in RFD, Get the first spatial stream only */
pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
}
......@@ -4559,7 +4559,7 @@ static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
/* record rx statistics for debug */
rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg;
prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg;
if (pdrvinfo->BW) //40M channel
if (pdrvinfo->BW) /* 40M channel */
priv->stats.received_bwtype[1+prxsc->rxsc]++;
else //20M channel
priv->stats.received_bwtype[0]++;
......@@ -5394,7 +5394,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
ieee->hwsec_active = 1;
if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) //add hwsec_support flag to totol control hw_sec on/off
if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) /* add hwsec_support flag to totol control hw_sec on/off */
{
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
......@@ -5427,7 +5427,7 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
TargetCommand = i+CAM_CONTENT_COUNT*EntryNo;
TargetCommand |= BIT31|BIT16;
if (i == 0) //MAC|Config
if (i == 0) /* MAC|Config */
{
TargetContent = (u32)(*(MacAddr+0)) << 16|
(u32)(*(MacAddr+1)) << 24|
......@@ -5435,7 +5435,7 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
write_nic_dword(dev, WCAMI, TargetContent);
write_nic_dword(dev, RWCAM, TargetCommand);
} else if (i == 1) //MAC
} else if (i == 1) /* MAC */
{
TargetContent = (u32)(*(MacAddr+2)) |
(u32)(*(MacAddr+3)) << 8|
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment