Commit 93075544 authored by Mike Isely's avatar Mike Isely Committed by Greg Kroah-Hartman

USB: cypress_m8: Feature buffer fixes

cypress_m8: Feature buffer fixes

From: Mike Isely <isely@pobox.com>

Don't hardcode the feature buffer size; use sizeof() instead.  That
way we can easily specify the size in a single spot.  Speaking of the
feature buffer size, the Cypress app note (and further testing with a
DeLorme Earthmate) suggests that this size should be 5 not 8 bytes.
Signed-off-by: default avatarMike Isely <isely@pobox.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 9544e833
......@@ -290,7 +290,7 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
{
int new_baudrate = 0, retval = 0, tries = 0;
struct cypress_private *priv;
__u8 feature_buffer[8];
__u8 feature_buffer[5];
unsigned long flags;
dbg("%s", __FUNCTION__);
......@@ -353,7 +353,7 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
}
dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
memset(feature_buffer, 0, 8);
memset(feature_buffer, 0, sizeof(feature_buffer));
/* fill the feature_buffer with new configuration */
*((u_int32_t *)feature_buffer) = new_baudrate;
......@@ -370,16 +370,20 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
feature_buffer[2], feature_buffer[3], feature_buffer[4]);
do {
retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer, 8, 500);
retval = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer,
sizeof(feature_buffer), 500);
if (tries++ >= 3)
break;
} while (retval != 8 && retval != -ENODEV);
} while (retval != sizeof(feature_buffer) &&
retval != -ENODEV);
if (retval != 8) {
if (retval != sizeof(feature_buffer)) {
err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
cypress_set_dead(port);
} else {
......@@ -393,19 +397,23 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m
case CYPRESS_GET_CONFIG:
dbg("%s - retreiving serial line settings", __FUNCTION__);
/* set initial values in feature buffer */
memset(feature_buffer, 0, 8);
memset(feature_buffer, 0, sizeof(feature_buffer));
do {
retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer, 8, 500);
retval = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
HID_REQ_GET_REPORT,
USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0x0300, 0, feature_buffer,
sizeof(feature_buffer), 500);
if (tries++ >= 3)
break;
} while (retval != 5 && retval != -ENODEV);
} while (retval != sizeof(feature_buffer) &&
retval != -ENODEV);
if (retval != 5) {
if (retval != sizeof(feature_buffer)) {
err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
cypress_set_dead(port);
return retval;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment