Commit 9318dce5 authored by Daniel Mack's avatar Daniel Mack Committed by Takashi Iwai

ALSA: snd_usb_caiaq: clean whitespaces

Cosmetic changes only, no code change.
Signed-off-by: default avatarDaniel Mack <daniel@caiaq.de>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 3218911f
This diff is collapsed.
......@@ -79,7 +79,7 @@ static struct usb_device_id snd_usb_id_table[] = {
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
.idVendor = USB_VID_NATIVEINSTRUMENTS,
.idProduct = USB_PID_RIGKONTROL2
.idProduct = USB_PID_RIGKONTROL2
},
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
......@@ -197,7 +197,7 @@ int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
if (buffer && len > 0)
memcpy(dev->ep1_out_buf+1, buffer, len);
dev->ep1_out_buf[0] = command;
return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
dev->ep1_out_buf, len+1, &actual_len, 200);
......@@ -208,7 +208,7 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
{
int ret;
char tmp[5];
switch (rate) {
case 44100: tmp[0] = SAMPLERATE_44100; break;
case 48000: tmp[0] = SAMPLERATE_48000; break;
......@@ -237,12 +237,12 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
if (ret)
return ret;
if (!wait_event_timeout(dev->ep1_wait_queue,
if (!wait_event_timeout(dev->ep1_wait_queue,
dev->audio_parm_answer >= 0, HZ))
return -EPIPE;
if (dev->audio_parm_answer != 1)
if (dev->audio_parm_answer != 1)
debug("unable to set the device's audio params\n");
else
dev->bpp = bpp;
......@@ -250,8 +250,8 @@ int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
}
int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev,
int digital, int analog, int erp)
int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *dev,
int digital, int analog, int erp)
{
char tmp[3] = { digital, analog, erp };
return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG,
......@@ -262,7 +262,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
{
int ret;
char val[4];
/* device-specific startup specials */
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
......@@ -314,7 +314,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
dev->control_state, 1);
break;
}
if (dev->spec.num_analog_audio_out +
dev->spec.num_analog_audio_in +
dev->spec.num_digital_audio_out +
......@@ -323,7 +323,7 @@ static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
if (ret < 0)
log("Unable to set up audio system (ret=%d)\n", ret);
}
if (dev->spec.num_midi_in +
dev->spec.num_midi_out > 0) {
ret = snd_usb_caiaq_midi_init(dev);
......@@ -363,7 +363,7 @@ static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
if (devnum >= SNDRV_CARDS)
return -ENODEV;
err = snd_card_create(index[devnum], id[devnum], THIS_MODULE,
err = snd_card_create(index[devnum], id[devnum], THIS_MODULE,
sizeof(struct snd_usb_caiaqdev), &card);
if (err < 0)
return err;
......@@ -386,7 +386,7 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
struct usb_device *usb_dev = dev->chip.dev;
struct snd_card *card = dev->chip.card;
int err, len;
if (usb_set_interface(usb_dev, 0, 1) != 0) {
log("can't set alt interface.\n");
return -EIO;
......@@ -395,19 +395,19 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
usb_init_urb(&dev->ep1_in_urb);
usb_init_urb(&dev->midi_out_urb);
usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
usb_rcvbulkpipe(usb_dev, 0x1),
dev->ep1_in_buf, EP1_BUFSIZE,
dev->ep1_in_buf, EP1_BUFSIZE,
usb_ep1_command_reply_dispatch, dev);
usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
usb_sndbulkpipe(usb_dev, 0x1),
dev->midi_out_buf, EP1_BUFSIZE,
dev->midi_out_buf, EP1_BUFSIZE,
snd_usb_caiaq_midi_output_done, dev);
init_waitqueue_head(&dev->ep1_wait_queue);
init_waitqueue_head(&dev->prepare_wait_queue);
if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
return -EIO;
......@@ -420,10 +420,10 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
dev->vendor_name, CAIAQ_USB_STR_LEN);
usb_string(usb_dev, usb_dev->descriptor.iProduct,
dev->product_name, CAIAQ_USB_STR_LEN);
usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
dev->serial, CAIAQ_USB_STR_LEN);
......@@ -431,7 +431,7 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
c = strchr(dev->serial, ' ');
if (c)
*c = '\0';
strcpy(card->driver, MODNAME);
strcpy(card->shortname, dev->product_name);
......@@ -449,18 +449,18 @@ static int __devinit init_card(struct snd_usb_caiaqdev *dev)
return 0;
}
static int __devinit snd_probe(struct usb_interface *intf,
static int __devinit snd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int ret;
struct snd_card *card;
struct usb_device *device = interface_to_usbdev(intf);
ret = create_card(device, &card);
if (ret < 0)
return ret;
usb_set_intfdata(intf, card);
ret = init_card(caiaqdev(card));
if (ret < 0) {
......@@ -468,7 +468,7 @@ static int __devinit snd_probe(struct usb_interface *intf,
snd_card_free(card);
return ret;
}
return 0;
}
......@@ -489,10 +489,10 @@ static void snd_disconnect(struct usb_interface *intf)
snd_usb_caiaq_input_free(dev);
#endif
snd_usb_caiaq_audio_free(dev);
usb_kill_urb(&dev->ep1_in_urb);
usb_kill_urb(&dev->midi_out_urb);
snd_card_free(card);
usb_reset_device(interface_to_usbdev(intf));
}
......
......@@ -40,7 +40,7 @@ static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *subst
if (!dev)
return;
dev->midi_receive_substream = up ? substream : NULL;
}
......@@ -64,18 +64,18 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
struct snd_rawmidi_substream *substream)
{
int len, ret;
dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
dev->midi_out_buf[1] = 0; /* port */
len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3,
EP1_BUFSIZE - 3);
if (len <= 0)
return;
dev->midi_out_buf[2] = len;
dev->midi_out_urb.transfer_buffer_length = len+3;
ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
if (ret < 0)
log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed,"
......@@ -88,7 +88,7 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
{
struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
if (up) {
dev->midi_out_substream = substream;
if (!dev->midi_out_active)
......@@ -113,12 +113,12 @@ static struct snd_rawmidi_ops snd_usb_caiaq_midi_input =
.trigger = snd_usb_caiaq_midi_input_trigger,
};
void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
int port, const char *buf, int len)
{
if (!dev->midi_receive_substream)
return;
snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
}
......@@ -142,16 +142,16 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
if (device->spec.num_midi_out > 0) {
rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
&snd_usb_caiaq_midi_output);
}
if (device->spec.num_midi_in > 0) {
rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
&snd_usb_caiaq_midi_input);
}
device->rmidi = rmidi;
return 0;
......@@ -160,7 +160,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
void snd_usb_caiaq_midi_output_done(struct urb* urb)
{
struct snd_usb_caiaqdev *dev = urb->context;
dev->midi_out_active = 0;
if (urb->status != 0)
return;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment