Skip to content

L
linux
Commit 93196ef9 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller
Browse files
Options

selftests: ocelot: tc_flower_chains: use conventional interface names 

This is a robotic rename as follows:

eth0 -> swp1
eth1 -> swp2
eth2 -> h2
eth3 -> h1

This brings the selftest more in line with the other forwarding
selftests, where h1 is connected to swp1, and h2 to swp2.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 980e74ca
Hide whitespace changes
Inline Side-by-side
Showing with 67 additions and 67 deletions
tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
View file @ 93196ef9
...@@ -15,7 +15,7 @@ require_command tcpdump ...@@ -15,7 +15,7 @@ require_command tcpdump
# | DUT ports Generator ports | # | DUT ports Generator ports |
# | +--------+ +--------+ +--------+ +--------+ | # | +--------+ +--------+ +--------+ +--------+ |
# | | | | | | | | | | # | | | | | | | | | |
# | | eth0 | | eth1 | | eth2 | | eth3 | | # | | swp1 | | swp2 | | h2 | | h1 | |
# | | | | | | | | | | # | | | | | | | | | |
# +-+--------+-+--------+-+--------+-+--------+-+ # +-+--------+-+--------+-+--------+-+--------+-+
# | | | | # | | | |
...@@ -24,15 +24,15 @@ require_command tcpdump ...@@ -24,15 +24,15 @@ require_command tcpdump
# | | # | |
# +--------------------------------+ # +--------------------------------+
eth0=${NETIFS[p1]} swp1=${NETIFS[p1]}
eth1=${NETIFS[p2]} swp2=${NETIFS[p2]}
eth2=${NETIFS[p3]} h2=${NETIFS[p3]}
eth3=${NETIFS[p4]} h1=${NETIFS[p4]}
eth0_mac="de:ad:be:ef:00:00" swp1_mac="de:ad:be:ef:00:00"
eth1_mac="de:ad:be:ef:00:01" swp2_mac="de:ad:be:ef:00:01"
eth2_mac="de:ad:be:ef:00:02" h2_mac="de:ad:be:ef:00:02"
eth3_mac="de:ad:be:ef:00:03" h1_mac="de:ad:be:ef:00:03"
# Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number # Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number
# used by the kernel driver. The numbers are: # used by the kernel driver. The numbers are:
...@@ -156,39 +156,39 @@ create_tcam_skeleton() ...@@ -156,39 +156,39 @@ create_tcam_skeleton()
setup_prepare() setup_prepare()
{ {
ip link set $eth0 up ip link set $swp1 up
ip link set $eth1 up ip link set $swp2 up
ip link set $eth2 up ip link set $h2 up
ip link set $eth3 up ip link set $h1 up
create_tcam_skeleton $eth0 create_tcam_skeleton $swp1
ip link add br0 type bridge ip link add br0 type bridge
ip link set $eth0 master br0 ip link set $swp1 master br0
ip link set $eth1 master br0 ip link set $swp2 master br0
ip link set br0 up ip link set br0 up
ip link add link $eth3 name $eth3.100 type vlan id 100 ip link add link $h1 name $h1.100 type vlan id 100
ip link set $eth3.100 up ip link set $h1.100 up
ip link add link $eth3 name $eth3.200 type vlan id 200 ip link add link $h1 name $h1.200 type vlan id 200
ip link set $eth3.200 up ip link set $h1.200 up
tc filter add dev $eth0 ingress chain $(IS1 1) pref 1 \ tc filter add dev $swp1 ingress chain $(IS1 1) pref 1 \
protocol 802.1Q flower skip_sw vlan_id 100 \ protocol 802.1Q flower skip_sw vlan_id 100 \
action vlan pop \ action vlan pop \
action goto chain $(IS1 2) action goto chain $(IS1 2)
tc filter add dev $eth0 egress chain $(ES0) pref 1 \ tc filter add dev $swp1 egress chain $(ES0) pref 1 \
flower skip_sw indev $eth1 \ flower skip_sw indev $swp2 \
action vlan push protocol 802.1Q id 100 action vlan push protocol 802.1Q id 100
tc filter add dev $eth0 ingress chain $(IS1 0) pref 2 \ tc filter add dev $swp1 ingress chain $(IS1 0) pref 2 \
protocol ipv4 flower skip_sw src_ip 10.1.1.2 \ protocol ipv4 flower skip_sw src_ip 10.1.1.2 \
action skbedit priority 7 \ action skbedit priority 7 \
action goto chain $(IS1 1) action goto chain $(IS1 1)
tc filter add dev $eth0 ingress chain $(IS2 0 0) pref 1 \ tc filter add dev $swp1 ingress chain $(IS2 0 0) pref 1 \
protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \ protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \
action police rate 50mbit burst 64k conform-exceed drop/pipe \ action police rate 50mbit burst 64k conform-exceed drop/pipe \
action goto chain $(IS2 1 0) action goto chain $(IS2 1 0)
...@@ -196,9 +196,9 @@ setup_prepare() ...@@ -196,9 +196,9 @@ setup_prepare()
cleanup() cleanup()
{ {
ip link del $eth3.200 ip link del $h1.200
ip link del $eth3.100 ip link del $h1.100
tc qdisc del dev $eth0 clsact tc qdisc del dev $swp1 clsact
ip link del br0 ip link del br0
} }
...@@ -206,21 +206,21 @@ test_vlan_pop() ...@@ -206,21 +206,21 @@ test_vlan_pop()
{ {
RET=0 RET=0
tcpdump_start $eth2 tcpdump_start $h2
# Work around Mausezahn VLAN builder bug # Work around Mausezahn VLAN builder bug
# (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using # (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using
# an 8021q upper # an 8021q upper
$MZ $eth3.100 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip $MZ $h1.100 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
sleep 1 sleep 1
tcpdump_stop $eth2 tcpdump_stop $h2
tcpdump_show $eth2 | grep -q "$eth3_mac > $eth2_mac, ethertype IPv4" tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, ethertype IPv4"
check_err "$?" "untagged reception" check_err "$?" "untagged reception"
tcpdump_cleanup $eth2 tcpdump_cleanup $h2
log_test "VLAN pop" log_test "VLAN pop"
} }
...@@ -229,18 +229,18 @@ test_vlan_push() ...@@ -229,18 +229,18 @@ test_vlan_push()
{ {
RET=0 RET=0
tcpdump_start $eth3.100 tcpdump_start $h1.100
$MZ $eth2 -q -c 1 -p 64 -a $eth2_mac -b $eth3_mac -t ip $MZ $h2 -q -c 1 -p 64 -a $h2_mac -b $h1_mac -t ip
sleep 1 sleep 1
tcpdump_stop $eth3.100 tcpdump_stop $h1.100
tcpdump_show $eth3.100 | grep -q "$eth2_mac > $eth3_mac" tcpdump_show $h1.100 | grep -q "$h2_mac > $h1_mac"
check_err "$?" "tagged reception" check_err "$?" "tagged reception"
tcpdump_cleanup $eth3.100 tcpdump_cleanup $h1.100
log_test "VLAN push" log_test "VLAN push"
} }
...@@ -250,33 +250,33 @@ test_vlan_ingress_modify() ...@@ -250,33 +250,33 @@ test_vlan_ingress_modify()
RET=0 RET=0
ip link set br0 type bridge vlan_filtering 1 ip link set br0 type bridge vlan_filtering 1
bridge vlan add dev $eth0 vid 200 bridge vlan add dev $swp1 vid 200
bridge vlan add dev $eth0 vid 300 bridge vlan add dev $swp1 vid 300
bridge vlan add dev $eth1 vid 300 bridge vlan add dev $swp2 vid 300
tc filter add dev $eth0 ingress chain $(IS1 2) pref 3 \ tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 \ protocol 802.1Q flower skip_sw vlan_id 200 \
action vlan modify id 300 \ action vlan modify id 300 \
action goto chain $(IS2 0 0) action goto chain $(IS2 0 0)
tcpdump_start $eth2 tcpdump_start $h2
$MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip $MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
sleep 1 sleep 1
tcpdump_stop $eth2 tcpdump_stop $h2
tcpdump_show $eth2 | grep -q "$eth3_mac > $eth2_mac, .* vlan 300" tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
check_err "$?" "tagged reception" check_err "$?" "tagged reception"
tcpdump_cleanup $eth2 tcpdump_cleanup $h2
tc filter del dev $eth0 ingress chain $(IS1 2) pref 3 tc filter del dev $swp1 ingress chain $(IS1 2) pref 3
bridge vlan del dev $eth0 vid 200 bridge vlan del dev $swp1 vid 200
bridge vlan del dev $eth0 vid 300 bridge vlan del dev $swp1 vid 300
bridge vlan del dev $eth1 vid 300 bridge vlan del dev $swp2 vid 300
ip link set br0 type bridge vlan_filtering 0 ip link set br0 type bridge vlan_filtering 0
log_test "Ingress VLAN modification" log_test "Ingress VLAN modification"
...@@ -286,34 +286,34 @@ test_vlan_egress_modify() ...@@ -286,34 +286,34 @@ test_vlan_egress_modify()
{ {
RET=0 RET=0
tc qdisc add dev $eth1 clsact tc qdisc add dev $swp2 clsact
ip link set br0 type bridge vlan_filtering 1 ip link set br0 type bridge vlan_filtering 1
bridge vlan add dev $eth0 vid 200 bridge vlan add dev $swp1 vid 200
bridge vlan add dev $eth1 vid 200 bridge vlan add dev $swp2 vid 200
tc filter add dev $eth1 egress chain $(ES0) pref 3 \ tc filter add dev $swp2 egress chain $(ES0) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \ protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \
action vlan modify id 300 priority 7 action vlan modify id 300 priority 7
tcpdump_start $eth2 tcpdump_start $h2
$MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip $MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
sleep 1 sleep 1
tcpdump_stop $eth2 tcpdump_stop $h2
tcpdump_show $eth2 | grep -q "$eth3_mac > $eth2_mac, .* vlan 300" tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
check_err "$?" "tagged reception" check_err "$?" "tagged reception"
tcpdump_cleanup $eth2 tcpdump_cleanup $h2
tc filter del dev $eth1 egress chain $(ES0) pref 3 tc filter del dev $swp2 egress chain $(ES0) pref 3
tc qdisc del dev $eth1 clsact tc qdisc del dev $swp2 clsact
bridge vlan del dev $eth0 vid 200 bridge vlan del dev $swp1 vid 200
bridge vlan del dev $eth1 vid 200 bridge vlan del dev $swp2 vid 200
ip link set br0 type bridge vlan_filtering 0 ip link set br0 type bridge vlan_filtering 0
log_test "Egress VLAN modification" log_test "Egress VLAN modification"
...@@ -323,11 +323,11 @@ test_skbedit_priority() ...@@ -323,11 +323,11 @@ test_skbedit_priority()
{ {
local num_pkts=100 local num_pkts=100
before=$(ethtool_stats_get $eth0 'rx_green_prio_7') before=$(ethtool_stats_get $swp1 'rx_green_prio_7')
$MZ $eth3 -q -c $num_pkts -p 64 -a $eth3_mac -b $eth2_mac -t ip -A 10.1.1.2 $MZ $h1 -q -c $num_pkts -p 64 -a $h1_mac -b $h2_mac -t ip -A 10.1.1.2
after=$(ethtool_stats_get $eth0 'rx_green_prio_7') after=$(ethtool_stats_get $swp1 'rx_green_prio_7')
if [ $((after - before)) = $num_pkts ]; then if [ $((after - before)) = $num_pkts ]; then
RET=0 RET=0
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7