Commit 933913da authored by Martin Bugge's avatar Martin Bugge Committed by Mauro Carvalho Chehab

[media] adv7842: adjust gain and offset for DVI-D signals

If the input signal is DVI-D and quantization range is RGB full range,
gain and offset must be adjusted to get the right range on the output.
Copied and adopted from adv7604.
Signed-off-by: default avatarMartin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent 7c869651
......@@ -546,6 +546,14 @@ static void main_reset(struct v4l2_subdev *sd)
/* ----------------------------------------------------------------------- */
static inline bool is_analog_input(struct v4l2_subdev *sd)
{
struct adv7842_state *state = to_state(sd);
return ((state->mode == ADV7842_MODE_RGB) ||
(state->mode == ADV7842_MODE_COMP));
}
static inline bool is_digital_input(struct v4l2_subdev *sd)
{
struct adv7842_state *state = to_state(sd);
......@@ -1027,12 +1035,72 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd,
cp_write(sd, 0xac, (height & 0x0f) << 4);
}
static void adv7842_set_offset(struct v4l2_subdev *sd, bool auto_offset, u16 offset_a, u16 offset_b, u16 offset_c)
{
struct adv7842_state *state = to_state(sd);
u8 offset_buf[4];
if (auto_offset) {
offset_a = 0x3ff;
offset_b = 0x3ff;
offset_c = 0x3ff;
}
v4l2_dbg(2, debug, sd, "%s: %s offset: a = 0x%x, b = 0x%x, c = 0x%x\n",
__func__, auto_offset ? "Auto" : "Manual",
offset_a, offset_b, offset_c);
offset_buf[0]= (cp_read(sd, 0x77) & 0xc0) | ((offset_a & 0x3f0) >> 4);
offset_buf[1] = ((offset_a & 0x00f) << 4) | ((offset_b & 0x3c0) >> 6);
offset_buf[2] = ((offset_b & 0x03f) << 2) | ((offset_c & 0x300) >> 8);
offset_buf[3] = offset_c & 0x0ff;
/* Registers must be written in this order with no i2c access in between */
if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x77, 4, offset_buf))
v4l2_err(sd, "%s: i2c error writing to CP reg 0x77, 0x78, 0x79, 0x7a\n", __func__);
}
static void adv7842_set_gain(struct v4l2_subdev *sd, bool auto_gain, u16 gain_a, u16 gain_b, u16 gain_c)
{
struct adv7842_state *state = to_state(sd);
u8 gain_buf[4];
u8 gain_man = 1;
u8 agc_mode_man = 1;
if (auto_gain) {
gain_man = 0;
agc_mode_man = 0;
gain_a = 0x100;
gain_b = 0x100;
gain_c = 0x100;
}
v4l2_dbg(2, debug, sd, "%s: %s gain: a = 0x%x, b = 0x%x, c = 0x%x\n",
__func__, auto_gain ? "Auto" : "Manual",
gain_a, gain_b, gain_c);
gain_buf[0] = ((gain_man << 7) | (agc_mode_man << 6) | ((gain_a & 0x3f0) >> 4));
gain_buf[1] = (((gain_a & 0x00f) << 4) | ((gain_b & 0x3c0) >> 6));
gain_buf[2] = (((gain_b & 0x03f) << 2) | ((gain_c & 0x300) >> 8));
gain_buf[3] = ((gain_c & 0x0ff));
/* Registers must be written in this order with no i2c access in between */
if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x73, 4, gain_buf))
v4l2_err(sd, "%s: i2c error writing to CP reg 0x73, 0x74, 0x75, 0x76\n", __func__);
}
static void set_rgb_quantization_range(struct v4l2_subdev *sd)
{
struct adv7842_state *state = to_state(sd);
bool rgb_output = io_read(sd, 0x02) & 0x02;
bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
v4l2_dbg(2, debug, sd, "%s: RGB quantization range: %d, RGB out: %d, HDMI: %d\n",
__func__, state->rgb_quantization_range,
rgb_output, hdmi_signal);
v4l2_dbg(2, debug, sd, "%s: rgb_quantization_range = %d\n",
__func__, state->rgb_quantization_range);
adv7842_set_gain(sd, true, 0x0, 0x0, 0x0);
adv7842_set_offset(sd, true, 0x0, 0x0, 0x0);
switch (state->rgb_quantization_range) {
case V4L2_DV_RGB_RANGE_AUTO:
......@@ -1050,7 +1118,7 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd)
break;
}
if (hdmi_read(sd, 0x05) & 0x80) {
if (hdmi_signal) {
/* Receiving HDMI signal
* Set automode */
io_write_and_or(sd, 0x02, 0x0f, 0xf0);
......@@ -1066,24 +1134,45 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd)
} else {
/* RGB full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x10);
if (is_digital_input(sd) && rgb_output) {
adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
} else {
adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
}
}
break;
case V4L2_DV_RGB_RANGE_LIMITED:
if (state->mode == ADV7842_MODE_COMP) {
/* YCrCb limited range (16-235) */
io_write_and_or(sd, 0x02, 0x0f, 0x20);
} else {
/* RGB limited range (16-235) */
io_write_and_or(sd, 0x02, 0x0f, 0x00);
break;
}
/* RGB limited range (16-235) */
io_write_and_or(sd, 0x02, 0x0f, 0x00);
break;
case V4L2_DV_RGB_RANGE_FULL:
if (state->mode == ADV7842_MODE_COMP) {
/* YCrCb full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x60);
break;
}
/* RGB full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x10);
if (is_analog_input(sd) || hdmi_signal)
break;
/* Adjust gain/offset for DVI-D signals only */
if (rgb_output) {
adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
} else {
/* RGB full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x10);
adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
}
break;
}
......@@ -1717,8 +1806,8 @@ static void select_input(struct v4l2_subdev *sd,
* (rev. 2.5, June 2010)" p. 17. */
afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */
afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */
cp_write(sd, 0x3e, 0x80); /* CP core pre-gain control,
enable color control */
cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */
/* CP coast control */
cp_write(sd, 0xc3, 0x33); /* Component mode */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment