Commit 935774cd authored by Brian Starkey's avatar Brian Starkey Committed by Liviu Dudau

drm: Add writeback connector type

Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.

Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().

Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.

When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.

Changes since v1:
 - Added drm_writeback.c + documentation
 - Added helper to initialize writeback connector in one go
 - Added core checks
 - Squashed into a single commit
 - Dropped the client cap
 - Writeback framebuffers are no longer persistent

Changes since v2:
 Daniel Vetter:
 - Subclass drm_connector to drm_writeback_connector
 - Relax check to allow CRTC to be set without an FB
 - Add some writeback_ prefixes
 - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
 Gustavo Padovan:
 - Add drm_writeback_job to handle writeback signalling centrally

Changes since v3:
 - Rebased
 - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS

Chances since v4:
 - Embed a drm_encoder inside the drm_writeback_connector to
   reduce the amount of boilerplate code required from the drivers
   that are using it.

Changes since v5:
 - Added Rob Clark's atomic_commit() vfunc to connector helper
   funcs, so that writeback jobs are committed from atomic helpers
 - Updated create_writeback_properties() signature to return an
   error code rather than a boolean false for failure.
 - Free writeback job with the connector state rather than when
   doing the cleanup_work()

Changes since v7:
 - fix extraneous use of out_fence that is only introduced in a
   subsequent patch.

Changes since v8:
 - whitespace changes pull from subsequent patch

Changes since v9:
 - Revert the v6 changes that free the writeback job in the connector
   state cleanup and return to doing it in the cleanup_work() function
Signed-off-by: default avatarBrian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: default avatarMihail Atanassov <mihail.atanassov@arm.com>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
Signed-off-by: default avatarLiviu Dudau <liviu.dudau@arm.com>
Reviewed-by: default avatarEric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/229037/
parent f664a526
......@@ -373,6 +373,15 @@ Connector Functions Reference
.. kernel-doc:: drivers/gpu/drm/drm_connector.c
:export:
Writeback Connectors
--------------------
.. kernel-doc:: drivers/gpu/drm/drm_writeback.c
:doc: overview
.. kernel-doc:: drivers/gpu/drm/drm_writeback.c
:export:
Encoder Abstraction
===================
......
......@@ -18,7 +18,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm_encoder.o drm_mode_object.o drm_property.o \
drm_plane.o drm_color_mgmt.o drm_print.o \
drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \
drm_syncobj.o drm_lease.o
drm_syncobj.o drm_lease.o drm_writeback.o
drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
drm-$(CONFIG_DRM_VM) += drm_vm.o
......
......@@ -30,6 +30,7 @@
#include <drm/drm_atomic.h>
#include <drm/drm_mode.h>
#include <drm/drm_print.h>
#include <drm/drm_writeback.h>
#include <linux/sync_file.h>
#include "drm_crtc_internal.h"
......@@ -690,6 +691,45 @@ static void drm_atomic_crtc_print_state(struct drm_printer *p,
crtc->funcs->atomic_print_state(p, state);
}
/**
* drm_atomic_connector_check - check connector state
* @connector: connector to check
* @state: connector state to check
*
* Provides core sanity checks for connector state.
*
* RETURNS:
* Zero on success, error code on failure
*/
static int drm_atomic_connector_check(struct drm_connector *connector,
struct drm_connector_state *state)
{
struct drm_crtc_state *crtc_state;
struct drm_writeback_job *writeback_job = state->writeback_job;
if ((connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) || !writeback_job)
return 0;
if (writeback_job->fb && !state->crtc) {
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] framebuffer without CRTC\n",
connector->base.id, connector->name);
return -EINVAL;
}
if (state->crtc)
crtc_state = drm_atomic_get_existing_crtc_state(state->state,
state->crtc);
if (writeback_job->fb && !crtc_state->active) {
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] has framebuffer, but [CRTC:%d] is off\n",
connector->base.id, connector->name,
state->crtc->base.id);
return -EINVAL;
}
return 0;
}
/**
* drm_atomic_get_plane_state - get plane state
* @state: global atomic state object
......@@ -1321,6 +1361,12 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
return -EINVAL;
}
state->content_protection = val;
} else if (property == config->writeback_fb_id_property) {
struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
int ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
if (fb)
drm_framebuffer_put(fb);
return ret;
} else if (connector->funcs->atomic_set_property) {
return connector->funcs->atomic_set_property(connector,
state, property, val);
......@@ -1407,6 +1453,9 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
*val = state->scaling_mode;
} else if (property == connector->content_protection_property) {
*val = state->content_protection;
} else if (property == config->writeback_fb_id_property) {
/* Writeback framebuffer is one-shot, write and forget */
*val = 0;
} else if (connector->funcs->atomic_get_property) {
return connector->funcs->atomic_get_property(connector,
state, property, val);
......@@ -1631,6 +1680,70 @@ drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
}
EXPORT_SYMBOL(drm_atomic_set_crtc_for_connector);
/*
* drm_atomic_get_writeback_job - return or allocate a writeback job
* @conn_state: Connector state to get the job for
*
* Writeback jobs have a different lifetime to the atomic state they are
* associated with. This convenience function takes care of allocating a job
* if there isn't yet one associated with the connector state, otherwise
* it just returns the existing job.
*
* Returns: The writeback job for the given connector state
*/
static struct drm_writeback_job *
drm_atomic_get_writeback_job(struct drm_connector_state *conn_state)
{
WARN_ON(conn_state->connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK);
if (!conn_state->writeback_job)
conn_state->writeback_job =
kzalloc(sizeof(*conn_state->writeback_job), GFP_KERNEL);
return conn_state->writeback_job;
}
/**
* drm_atomic_set_writeback_fb_for_connector - set writeback framebuffer
* @conn_state: atomic state object for the connector
* @fb: fb to use for the connector
*
* This is used to set the framebuffer for a writeback connector, which outputs
* to a buffer instead of an actual physical connector.
* Changing the assigned framebuffer requires us to grab a reference to the new
* fb and drop the reference to the old fb, if there is one. This function
* takes care of all these details besides updating the pointer in the
* state object itself.
*
* Note: The only way conn_state can already have an fb set is if the commit
* sets the property more than once.
*
* See also: drm_writeback_connector_init()
*
* Returns: 0 on success
*/
int drm_atomic_set_writeback_fb_for_connector(
struct drm_connector_state *conn_state,
struct drm_framebuffer *fb)
{
struct drm_writeback_job *job =
drm_atomic_get_writeback_job(conn_state);
if (!job)
return -ENOMEM;
drm_framebuffer_assign(&job->fb, fb);
if (fb)
DRM_DEBUG_ATOMIC("Set [FB:%d] for connector state %p\n",
fb->base.id, conn_state);
else
DRM_DEBUG_ATOMIC("Set [NOFB] for connector state %p\n",
conn_state);
return 0;
}
EXPORT_SYMBOL(drm_atomic_set_writeback_fb_for_connector);
/**
* drm_atomic_add_affected_connectors - add connectors for crtc
* @state: atomic state
......@@ -1752,6 +1865,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
struct drm_plane_state *plane_state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
struct drm_connector *conn;
struct drm_connector_state *conn_state;
int i, ret = 0;
DRM_DEBUG_ATOMIC("checking %p\n", state);
......@@ -1774,6 +1889,15 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
}
}
for_each_new_connector_in_state(state, conn, conn_state, i) {
ret = drm_atomic_connector_check(conn, conn_state);
if (ret) {
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] atomic core check failed\n",
conn->base.id, conn->name);
return ret;
}
}
if (config->funcs->atomic_check)
ret = config->funcs->atomic_check(state->dev, state);
......
......@@ -30,6 +30,7 @@
#include <drm/drm_plane_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_writeback.h>
#include <linux/dma-fence.h>
#include "drm_crtc_helper_internal.h"
......@@ -1172,6 +1173,25 @@ void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
}
EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables);
static void drm_atomic_helper_commit_writebacks(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
int i;
for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
const struct drm_connector_helper_funcs *funcs;
funcs = connector->helper_private;
if (new_conn_state->writeback_job && new_conn_state->writeback_job->fb) {
WARN_ON(connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK);
funcs->atomic_commit(connector, new_conn_state->writeback_job);
}
}
}
/**
* drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs
* @dev: DRM device
......@@ -1251,6 +1271,8 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
drm_bridge_enable(encoder->bridge);
}
drm_atomic_helper_commit_writebacks(dev, old_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_enables);
......@@ -3647,6 +3669,9 @@ __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
if (state->crtc)
drm_connector_get(connector);
state->commit = NULL;
/* Don't copy over a writeback job, they are used only once */
state->writeback_job = NULL;
}
EXPORT_SYMBOL(__drm_atomic_helper_connector_duplicate_state);
......
......@@ -87,6 +87,7 @@ static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
{ DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
{ DRM_MODE_CONNECTOR_DSI, "DSI" },
{ DRM_MODE_CONNECTOR_DPI, "DPI" },
{ DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" },
};
void drm_connector_ida_init(void)
......@@ -253,7 +254,8 @@ int drm_connector_init(struct drm_device *dev,
config->num_connector++;
spin_unlock_irq(&config->connector_list_lock);
if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL &&
connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
drm_object_attach_property(&connector->base,
config->edid_property,
0);
......
// SPDX-License-Identifier: GPL-2.0
/*
* (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
* Author: Brian Starkey <brian.starkey@arm.com>
*
* This program is free software and is provided to you under the terms of the
* GNU General Public License version 2 as published by the Free Software
* Foundation, and any use by you of this program is subject to the terms
* of such GNU licence.
*/
#include <drm/drm_crtc.h>
#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_property.h>
#include <drm/drm_writeback.h>
#include <drm/drmP.h>
/**
* DOC: overview
*
* Writeback connectors are used to expose hardware which can write the output
* from a CRTC to a memory buffer. They are used and act similarly to other
* types of connectors, with some important differences:
* - Writeback connectors don't provide a way to output visually to the user.
* - Writeback connectors should always report as "disconnected" (so that
* clients which don't understand them will ignore them).
* - Writeback connectors don't have EDID.
*
* A framebuffer may only be attached to a writeback connector when the
* connector is attached to a CRTC. The WRITEBACK_FB_ID property which sets the
* framebuffer applies only to a single commit (see below). A framebuffer may
* not be attached while the CRTC is off.
*
* Writeback connectors have some additional properties, which userspace
* can use to query and control them:
*
* "WRITEBACK_FB_ID":
* Write-only object property storing a DRM_MODE_OBJECT_FB: it stores the
* framebuffer to be written by the writeback connector. This property is
* similar to the FB_ID property on planes, but will always read as zero
* and is not preserved across commits.
* Userspace must set this property to an output buffer every time it
* wishes the buffer to get filled.
*
* "WRITEBACK_PIXEL_FORMATS":
* Immutable blob property to store the supported pixel formats table. The
* data is an array of u32 DRM_FORMAT_* fourcc values.
* Userspace can use this blob to find out what pixel formats are supported
* by the connector's writeback engine.
*/
static int create_writeback_properties(struct drm_device *dev)
{
struct drm_property *prop;
if (!dev->mode_config.writeback_fb_id_property) {
prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
"WRITEBACK_FB_ID",
DRM_MODE_OBJECT_FB);
if (!prop)
return -ENOMEM;
dev->mode_config.writeback_fb_id_property = prop;
}
if (!dev->mode_config.writeback_pixel_formats_property) {
prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
DRM_MODE_PROP_ATOMIC |
DRM_MODE_PROP_IMMUTABLE,
"WRITEBACK_PIXEL_FORMATS", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.writeback_pixel_formats_property = prop;
}
return 0;
}
static const struct drm_encoder_funcs drm_writeback_encoder_funcs = {
.destroy = drm_encoder_cleanup,
};
/**
* drm_writeback_connector_init - Initialize a writeback connector and its properties
* @dev: DRM device
* @wb_connector: Writeback connector to initialize
* @con_funcs: Connector funcs vtable
* @enc_helper_funcs: Encoder helper funcs vtable to be used by the internal encoder
* @formats: Array of supported pixel formats for the writeback engine
* @n_formats: Length of the formats array
*
* This function creates the writeback-connector-specific properties if they
* have not been already created, initializes the connector as
* type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property
* values. It will also create an internal encoder associated with the
* drm_writeback_connector and set it to use the @enc_helper_funcs vtable for
* the encoder helper.
*
* Drivers should always use this function instead of drm_connector_init() to
* set up writeback connectors.
*
* Returns: 0 on success, or a negative error code
*/
int drm_writeback_connector_init(struct drm_device *dev,
struct drm_writeback_connector *wb_connector,
const struct drm_connector_funcs *con_funcs,
const struct drm_encoder_helper_funcs *enc_helper_funcs,
const u32 *formats, int n_formats)
{
struct drm_property_blob *blob;
struct drm_connector *connector = &wb_connector->base;
struct drm_mode_config *config = &dev->mode_config;
int ret = create_writeback_properties(dev);
if (ret != 0)
return ret;
blob = drm_property_create_blob(dev, n_formats * sizeof(*formats),
formats);
if (IS_ERR(blob))
return PTR_ERR(blob);
drm_encoder_helper_add(&wb_connector->encoder, enc_helper_funcs);
ret = drm_encoder_init(dev, &wb_connector->encoder,
&drm_writeback_encoder_funcs,
DRM_MODE_ENCODER_VIRTUAL, NULL);
if (ret)
goto fail;
connector->interlace_allowed = 0;
ret = drm_connector_init(dev, connector, con_funcs,
DRM_MODE_CONNECTOR_WRITEBACK);
if (ret)
goto connector_fail;
ret = drm_mode_connector_attach_encoder(connector,
&wb_connector->encoder);
if (ret)
goto attach_fail;
INIT_LIST_HEAD(&wb_connector->job_queue);
spin_lock_init(&wb_connector->job_lock);
drm_object_attach_property(&connector->base,
config->writeback_fb_id_property, 0);
drm_object_attach_property(&connector->base,
config->writeback_pixel_formats_property,
blob->base.id);
wb_connector->pixel_formats_blob_ptr = blob;
return 0;
attach_fail:
drm_connector_cleanup(connector);
connector_fail:
drm_encoder_cleanup(&wb_connector->encoder);
fail:
drm_property_blob_put(blob);
return ret;
}
EXPORT_SYMBOL(drm_writeback_connector_init);
/**
* drm_writeback_queue_job - Queue a writeback job for later signalling
* @wb_connector: The writeback connector to queue a job on
* @job: The job to queue
*
* This function adds a job to the job_queue for a writeback connector. It
* should be considered to take ownership of the writeback job, and so any other
* references to the job must be cleared after calling this function.
*
* Drivers must ensure that for a given writeback connector, jobs are queued in
* exactly the same order as they will be completed by the hardware (and
* signaled via drm_writeback_signal_completion).
*
* For every call to drm_writeback_queue_job() there must be exactly one call to
* drm_writeback_signal_completion()
*
* See also: drm_writeback_signal_completion()
*/
void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector,
struct drm_writeback_job *job)
{
unsigned long flags;
spin_lock_irqsave(&wb_connector->job_lock, flags);
list_add_tail(&job->list_entry, &wb_connector->job_queue);
spin_unlock_irqrestore(&wb_connector->job_lock, flags);
}
EXPORT_SYMBOL(drm_writeback_queue_job);
/*
* @cleanup_work: deferred cleanup of a writeback job
*
* The job cannot be cleaned up directly in drm_writeback_signal_completion,
* because it may be called in interrupt context. Dropping the framebuffer
* reference can sleep, and so the cleanup is deferred to a workqueue.
*/
static void cleanup_work(struct work_struct *work)
{
struct drm_writeback_job *job = container_of(work,
struct drm_writeback_job,
cleanup_work);
drm_framebuffer_put(job->fb);
kfree(job);
}
/**
* drm_writeback_signal_completion - Signal the completion of a writeback job
* @wb_connector: The writeback connector whose job is complete
*
* Drivers should call this to signal the completion of a previously queued
* writeback job. It should be called as soon as possible after the hardware
* has finished writing, and may be called from interrupt context.
* It is the driver's responsibility to ensure that for a given connector, the
* hardware completes writeback jobs in the same order as they are queued.
*
* Unless the driver is holding its own reference to the framebuffer, it must
* not be accessed after calling this function.
*
* See also: drm_writeback_queue_job()
*/
void
drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector)
{
unsigned long flags;
struct drm_writeback_job *job;
spin_lock_irqsave(&wb_connector->job_lock, flags);
job = list_first_entry_or_null(&wb_connector->job_queue,
struct drm_writeback_job,
list_entry);
if (job)
list_del(&job->list_entry);
spin_unlock_irqrestore(&wb_connector->job_lock, flags);
if (WARN_ON(!job))
return;
INIT_WORK(&job->cleanup_work, cleanup_work);
queue_work(system_long_wq, &job->cleanup_work);
}
EXPORT_SYMBOL(drm_writeback_signal_completion);
......@@ -594,6 +594,9 @@ void drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
int __must_check
drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
struct drm_crtc *crtc);
int drm_atomic_set_writeback_fb_for_connector(
struct drm_connector_state *conn_state,
struct drm_framebuffer *fb);
int __must_check
drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
struct drm_crtc *crtc);
......
......@@ -437,6 +437,19 @@ struct drm_connector_state {
* protection. This is most commonly used for HDCP.
*/
unsigned int content_protection;
/**
* @writeback_job: Writeback job for writeback connectors
*
* Holds the framebuffer for a writeback connector. As the writeback
* completion may be asynchronous to the normal commit cycle, the
* writeback job lifetime is managed separately from the normal atomic
* state by this object.
*
* See also: drm_writeback_queue_job() and
* drm_writeback_signal_completion()
*/
struct drm_writeback_job *writeback_job;
};
/**
......
......@@ -784,6 +784,21 @@ struct drm_mode_config {
*/
struct drm_property *panel_orientation_property;
/**
* @writeback_fb_id_property: Property for writeback connectors, storing
* the ID of the output framebuffer.
* See also: drm_writeback_connector_init()
*/
struct drm_property *writeback_fb_id_property;
/**
* @writeback_pixel_formats_property: Property for writeback connectors,
* storing an array of the supported pixel formats for the writeback
* engine (read-only).
* See also: drm_writeback_connector_init()
*/
struct drm_property *writeback_pixel_formats_property;
/* dumb ioctl parameters */
uint32_t preferred_depth, prefer_shadow;
......
......@@ -974,6 +974,17 @@ struct drm_connector_helper_funcs {
*/
int (*atomic_check)(struct drm_connector *connector,
struct drm_connector_state *state);
/**
* @atomic_commit:
*
* This hook is to be used by drivers implementing writeback connectors
* that need a point when to commit the writeback job to the hardware.
*
* This callback is used by the atomic modeset helpers.
*/
void (*atomic_commit)(struct drm_connector *connector,
struct drm_writeback_job *writeback_job);
};
/**
......
/* SPDX-License-Identifier: GPL-2.0 */
/*
* (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
* Author: Brian Starkey <brian.starkey@arm.com>
*
* This program is free software and is provided to you under the terms of the
* GNU General Public License version 2 as published by the Free Software
* Foundation, and any use by you of this program is subject to the terms
* of such GNU licence.
*/
#ifndef __DRM_WRITEBACK_H__
#define __DRM_WRITEBACK_H__
#include <drm/drm_connector.h>
#include <drm/drm_encoder.h>
#include <linux/workqueue.h>
struct drm_writeback_connector {
struct drm_connector base;
/**
* @encoder: Internal encoder used by the connector to fulfill
* the DRM framework requirements. The users of the
* @drm_writeback_connector control the behaviour of the @encoder
* by passing the @enc_funcs parameter to drm_writeback_connector_init()
* function.
*/
struct drm_encoder encoder;
/**
* @pixel_formats_blob_ptr:
*
* DRM blob property data for the pixel formats list on writeback
* connectors
* See also drm_writeback_connector_init()
*/
struct drm_property_blob *pixel_formats_blob_ptr;
/** @job_lock: Protects job_queue */
spinlock_t job_lock;
/**
* @job_queue:
*
* Holds a list of a connector's writeback jobs; the last item is the
* most recent. The first item may be either waiting for the hardware
* to begin writing, or currently being written.
*
* See also: drm_writeback_queue_job() and
* drm_writeback_signal_completion()
*/
struct list_head job_queue;
};
struct drm_writeback_job {
/**
* @cleanup_work:
*
* Used to allow drm_writeback_signal_completion to defer dropping the
* framebuffer reference to a workqueue
*/
struct work_struct cleanup_work;
/**
* @list_entry:
*
* List item for the writeback connector's @job_queue
*/
struct list_head list_entry;
/**
* @fb:
*
* Framebuffer to be written to by the writeback connector. Do not set
* directly, use drm_atomic_set_writeback_fb_for_connector()
*/
struct drm_framebuffer *fb;
};
int drm_writeback_connector_init(struct drm_device *dev,
struct drm_writeback_connector *wb_connector,
const struct drm_connector_funcs *con_funcs,
const struct drm_encoder_helper_funcs *enc_helper_funcs,
const u32 *formats, int n_formats);
void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector,
struct drm_writeback_job *job);
void drm_writeback_cleanup_job(struct drm_writeback_job *job);
void drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector);
#endif
......@@ -351,6 +351,7 @@ enum drm_mode_subconnector {
#define DRM_MODE_CONNECTOR_VIRTUAL 15
#define DRM_MODE_CONNECTOR_DSI 16
#define DRM_MODE_CONNECTOR_DPI 17
#define DRM_MODE_CONNECTOR_WRITEBACK 18
struct drm_mode_get_connector {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment