s3c2410fb: byte ordering fixes

This patch sets correct bits related to the byte ordering of the
framebuffer.  This was tested on little endian kernel only.  The big endian
kernel may require different settings.

The patch also adds 32 bpp mode which is called 24 bpp by Samsung.  One
pixel takes 32 bits but only 24 bits are used in this mode.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/s3c2410fb.c

@@ -265,8 +265,8 @@ static int s3c2410fb_check_var(struct fb_var_screeninfo *var,
 			var->blue.length	= 5;
 		}
 		break;
-	case 24:
-		/* 24 bpp 888 */
+	case 32:
+		/* 24 bpp 888 and 8 dummy */
 		var->red.length		= 8;
 		var->red.offset		= 16;
 		var->green.length	= 8;
@@ -274,8 +274,6 @@ static int s3c2410fb_check_var(struct fb_var_screeninfo *var,
 		var->blue.length	= 8;
 		var->blue.offset	= 0;
 		break;
-
-
 	}
 	return 0;
 }
@@ -374,11 +372,21 @@ static void s3c2410fb_calculate_tft_lcd_regs(const struct fb_info *info,
 		break;
 	case 8:
 		regs->lcdcon1 |= S3C2410_LCDCON1_TFT8BPP;
+		regs->lcdcon5 |= S3C2410_LCDCON5_BSWP |
+				 S3C2410_LCDCON5_FRM565;
+		regs->lcdcon5 &= ~S3C2410_LCDCON5_HWSWP;
 		break;
 	case 16:
 		regs->lcdcon1 |= S3C2410_LCDCON1_TFT16BPP;
+		regs->lcdcon5 &= ~S3C2410_LCDCON5_BSWP;
+		regs->lcdcon5 |= S3C2410_LCDCON5_HWSWP;
+		break;
+	case 32:
+		regs->lcdcon1 |= S3C2410_LCDCON1_TFT24BPP;
+		regs->lcdcon5 &= ~(S3C2410_LCDCON5_BSWP |
+				   S3C2410_LCDCON5_HWSWP |
+				   S3C2410_LCDCON5_BPP24BL);
 		break;
-
 	default:
 		/* invalid pixel depth */
 		dev_err(fbi->dev, "invalid bpp %d\n",
@@ -475,7 +483,9 @@ static int s3c2410fb_set_par(struct fb_info *info)
 	struct fb_var_screeninfo *var = &info->var;
 
 	switch (var->bits_per_pixel) {
+	case 32:
 	case 16:
+	case 12:
 		info->fix.visual = FB_VISUAL_TRUECOLOR;
 		break;
 	case 1: