ARM: bcm283x: Reduce register ranges for UART, SPI and I2C

The assigned register ranges for UART, SPI and I2C were too wasteful.
In order to avoid overlapping with the new functions on BCM2711
reduce the ranges.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Eric Anholt <eric@anholt.net>

arch/arm/boot/dts/bcm283x.dtsi

@@ -397,7 +397,7 @@ uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
 
 		uart0: serial@7e201000 {
 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
+			reg = <0x7e201000 0x200>;
 			interrupts = <2 25>;
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
@@ -428,7 +428,7 @@ i2s: i2s@7e203000 {
 
 		spi: spi@7e204000 {
 			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
+			reg = <0x7e204000 0x200>;
 			interrupts = <2 22>;
 			clocks = <&clocks BCM2835_CLOCK_VPU>;
 			dmas = <&dma 6>, <&dma 7>;
@@ -440,7 +440,7 @@ spi: spi@7e204000 {
 
 		i2c0: i2c@7e205000 {
 			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
+			reg = <0x7e205000 0x200>;
 			interrupts = <2 21>;
 			clocks = <&clocks BCM2835_CLOCK_VPU>;
 			#address-cells = <1>;