Commit 93fa9d32 authored by Marcel Apfelbaum's avatar Marcel Apfelbaum Committed by Bjorn Helgaas

PCI: shpchp: Check bridge's secondary (not primary) bus speed

When a new device is added below a hotplug bridge, the bridge's secondary
bus speed and the device's bus speed must match.  The shpchp driver
previously checked the bridge's *primary* bus speed, not the secondary bus
speed.

This caused hot-add errors like:

  shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch

Check the secondary bus speed instead.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251
Fixes: 3749c51a ("PCI: Make current and maximum bus speeds part of the PCI core")
Signed-off-by: default avatarMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
CC: stable@vger.kernel.org	# v2.6.34+
parent 05d8f659
......@@ -282,8 +282,8 @@ static int board_added(struct slot *p_slot)
return WRONG_BUS_FREQUENCY;
}
bsp = ctrl->pci_dev->bus->cur_bus_speed;
msp = ctrl->pci_dev->bus->max_bus_speed;
bsp = ctrl->pci_dev->subordinate->cur_bus_speed;
msp = ctrl->pci_dev->subordinate->max_bus_speed;
/* Check if there are other slots or devices on the same bus */
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment