Commit 94144a46 authored by Kevin Liu's avatar Kevin Liu Committed by Chris Ball

mmc: sdhci: add get_cd() implementation

1. mmc_rescan will call get_cd to know whether the card is present
before mmc_rescan_try_freq to avoid useless trials during
card removal or start host is called when card is not present.

2. get_cd needs to be checked to resolve slow card removal issue.
Signed-off-by: default avatarKevin Liu <kliu5@marvell.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 1450734e
...@@ -1581,6 +1581,37 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ...@@ -1581,6 +1581,37 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
sdhci_runtime_pm_put(host); sdhci_runtime_pm_put(host);
} }
static int sdhci_do_get_cd(struct sdhci_host *host)
{
int gpio_cd = mmc_gpio_get_cd(host->mmc);
if (host->flags & SDHCI_DEVICE_DEAD)
return 0;
/* If polling/nonremovable, assume that the card is always present. */
if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
(host->mmc->caps & MMC_CAP_NONREMOVABLE))
return 1;
/* Try slot gpio detect */
if (!IS_ERR_VALUE(gpio_cd))
return !!gpio_cd;
/* Host native card detect */
return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
}
static int sdhci_get_cd(struct mmc_host *mmc)
{
struct sdhci_host *host = mmc_priv(mmc);
int ret;
sdhci_runtime_pm_get(host);
ret = sdhci_do_get_cd(host);
sdhci_runtime_pm_put(host);
return ret;
}
static int sdhci_check_ro(struct sdhci_host *host) static int sdhci_check_ro(struct sdhci_host *host)
{ {
unsigned long flags; unsigned long flags;
...@@ -2038,6 +2069,7 @@ static void sdhci_card_event(struct mmc_host *mmc) ...@@ -2038,6 +2069,7 @@ static void sdhci_card_event(struct mmc_host *mmc)
static const struct mmc_host_ops sdhci_ops = { static const struct mmc_host_ops sdhci_ops = {
.request = sdhci_request, .request = sdhci_request,
.set_ios = sdhci_set_ios, .set_ios = sdhci_set_ios,
.get_cd = sdhci_get_cd,
.get_ro = sdhci_get_ro, .get_ro = sdhci_get_ro,
.hw_reset = sdhci_hw_reset, .hw_reset = sdhci_hw_reset,
.enable_sdio_irq = sdhci_enable_sdio_irq, .enable_sdio_irq = sdhci_enable_sdio_irq,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment