Commit 941f1308 authored by Nuno Sa's avatar Nuno Sa Committed by Jonathan Cameron

iio: adis16480: support burst read function

Some supported devices support burst read function. This provides a method
for reading a batch of data (status, temperature, gyroscopes,
accelerometers, time stamp/data counter, and CRC code), which does not
require a stall time between each 16-bit segment and only requires one
command on the DIN line to initiate. Devices supporting this mode
are:

 * adis16495-1
 * adis16495-2
 * adis16495-3
 * adis16497-1
 * adis16497-2
 * adis16497-3
Reviewed-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarNuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210422103735.136367-1-nuno.sa@analog.comSigned-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent e50f8e04
......@@ -19,11 +19,15 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/lcm.h>
#include <linux/swab.h>
#include <linux/crc32.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/debugfs.h>
......@@ -103,6 +107,12 @@
* Available only for ADIS1649x devices
*/
#define ADIS16495_REG_SYNC_SCALE ADIS16480_REG(0x03, 0x10)
#define ADIS16495_REG_BURST_CMD ADIS16480_REG(0x00, 0x7C)
#define ADIS16495_BURST_ID 0xA5A5
/* total number of segments in burst */
#define ADIS16495_BURST_MAX_DATA 20
/* spi max speed in burst mode */
#define ADIS16495_BURST_MAX_SPEED 6000000
#define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20)
......@@ -163,6 +173,8 @@ struct adis16480 {
struct clk *ext_clk;
enum adis16480_clock_mode clk_mode;
unsigned int clk_freq;
/* Alignment needed for the timestamp */
__be16 data[ADIS16495_BURST_MAX_DATA] __aligned(8);
};
static const char * const adis16480_int_pin_names[4] = {
......@@ -863,7 +875,7 @@ static const char * const adis16480_status_error_msgs[] = {
static int adis16480_enable_irq(struct adis *adis, bool enable);
#define ADIS16480_DATA(_prod_id, _timeouts) \
#define ADIS16480_DATA(_prod_id, _timeouts, _burst_len) \
{ \
.diag_stat_reg = ADIS16480_REG_DIAG_STS, \
.glob_cmd_reg = ADIS16480_REG_GLOB_CMD, \
......@@ -887,6 +899,9 @@ static int adis16480_enable_irq(struct adis *adis, bool enable);
BIT(ADIS16480_DIAG_STAT_BARO_FAIL), \
.enable_irq = adis16480_enable_irq, \
.timeouts = (_timeouts), \
.burst_reg_cmd = ADIS16495_REG_BURST_CMD, \
.burst_len = (_burst_len), \
.burst_max_speed_hz = ADIS16495_BURST_MAX_SPEED \
}
static const struct adis_timeout adis16485_timeouts = {
......@@ -931,7 +946,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.int_clk = 2460000,
.max_dec_rate = 2048,
.filter_freqs = adis16480_def_filter_freqs,
.adis_data = ADIS16480_DATA(16375, &adis16485_timeouts),
.adis_data = ADIS16480_DATA(16375, &adis16485_timeouts, 0),
},
[ADIS16480] = {
.channels = adis16480_channels,
......@@ -944,7 +959,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.int_clk = 2460000,
.max_dec_rate = 2048,
.filter_freqs = adis16480_def_filter_freqs,
.adis_data = ADIS16480_DATA(16480, &adis16480_timeouts),
.adis_data = ADIS16480_DATA(16480, &adis16480_timeouts, 0),
},
[ADIS16485] = {
.channels = adis16485_channels,
......@@ -957,7 +972,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.int_clk = 2460000,
.max_dec_rate = 2048,
.filter_freqs = adis16480_def_filter_freqs,
.adis_data = ADIS16480_DATA(16485, &adis16485_timeouts),
.adis_data = ADIS16480_DATA(16485, &adis16485_timeouts, 0),
},
[ADIS16488] = {
.channels = adis16480_channels,
......@@ -970,7 +985,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.int_clk = 2460000,
.max_dec_rate = 2048,
.filter_freqs = adis16480_def_filter_freqs,
.adis_data = ADIS16480_DATA(16488, &adis16485_timeouts),
.adis_data = ADIS16480_DATA(16488, &adis16485_timeouts, 0),
},
[ADIS16490] = {
.channels = adis16485_channels,
......@@ -984,7 +999,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 4250,
.filter_freqs = adis16495_def_filter_freqs,
.has_pps_clk_mode = true,
.adis_data = ADIS16480_DATA(16490, &adis16495_timeouts),
.adis_data = ADIS16480_DATA(16490, &adis16495_timeouts, 0),
},
[ADIS16495_1] = {
.channels = adis16485_channels,
......@@ -998,7 +1013,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 4250,
.filter_freqs = adis16495_def_filter_freqs,
.has_pps_clk_mode = true,
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
/* 20 elements of 16bits */
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
ADIS16495_BURST_MAX_DATA * 2),
},
[ADIS16495_2] = {
.channels = adis16485_channels,
......@@ -1012,7 +1029,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 4250,
.filter_freqs = adis16495_def_filter_freqs,
.has_pps_clk_mode = true,
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
/* 20 elements of 16bits */
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
ADIS16495_BURST_MAX_DATA * 2),
},
[ADIS16495_3] = {
.channels = adis16485_channels,
......@@ -1026,7 +1045,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 4250,
.filter_freqs = adis16495_def_filter_freqs,
.has_pps_clk_mode = true,
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
/* 20 elements of 16bits */
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts,
ADIS16495_BURST_MAX_DATA * 2),
},
[ADIS16497_1] = {
.channels = adis16485_channels,
......@@ -1040,7 +1061,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 4250,
.filter_freqs = adis16495_def_filter_freqs,
.has_pps_clk_mode = true,
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
/* 20 elements of 16bits */
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
ADIS16495_BURST_MAX_DATA * 2),
},
[ADIS16497_2] = {
.channels = adis16485_channels,
......@@ -1054,7 +1077,9 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 4250,
.filter_freqs = adis16495_def_filter_freqs,
.has_pps_clk_mode = true,
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
/* 20 elements of 16bits */
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
ADIS16495_BURST_MAX_DATA * 2),
},
[ADIS16497_3] = {
.channels = adis16485_channels,
......@@ -1068,10 +1093,118 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 4250,
.filter_freqs = adis16495_def_filter_freqs,
.has_pps_clk_mode = true,
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
/* 20 elements of 16bits */
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts,
ADIS16495_BURST_MAX_DATA * 2),
},
};
static bool adis16480_validate_crc(const u16 *buf, const u8 n_elem, const u32 crc)
{
u32 crc_calc;
u16 crc_buf[15];
int j;
for (j = 0; j < n_elem; j++)
crc_buf[j] = swab16(buf[j]);
crc_calc = crc32(~0, crc_buf, n_elem * 2);
crc_calc ^= ~0;
return (crc == crc_calc);
}
static irqreturn_t adis16480_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct adis16480 *st = iio_priv(indio_dev);
struct adis *adis = &st->adis;
int ret, bit, offset, i = 0;
__be16 *buffer;
u32 crc;
bool valid;
adis_dev_lock(adis);
if (adis->current_page != 0) {
adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
adis->tx[1] = 0;
ret = spi_write(adis->spi, adis->tx, 2);
if (ret) {
dev_err(&adis->spi->dev, "Failed to change device page: %d\n", ret);
adis_dev_unlock(adis);
goto irq_done;
}
adis->current_page = 0;
}
ret = spi_sync(adis->spi, &adis->msg);
if (ret) {
dev_err(&adis->spi->dev, "Failed to read data: %d\n", ret);
adis_dev_unlock(adis);
goto irq_done;
}
adis_dev_unlock(adis);
/*
* After making the burst request, the response can have one or two
* 16-bit responses containing the BURST_ID depending on the sclk. If
* clk > 3.6MHz, then we will have two BURST_ID in a row. If clk < 3MHZ,
* we have only one. To manage that variation, we use the transition from the
* BURST_ID to the SYS_E_FLAG register, which will not be equal to 0xA5A5. If
* we not find this variation in the first 4 segments, then the data should
* not be valid.
*/
buffer = adis->buffer;
for (offset = 0; offset < 4; offset++) {
u16 curr = be16_to_cpu(buffer[offset]);
u16 next = be16_to_cpu(buffer[offset + 1]);
if (curr == ADIS16495_BURST_ID && next != ADIS16495_BURST_ID) {
offset++;
break;
}
}
if (offset == 4) {
dev_err(&adis->spi->dev, "Invalid burst data\n");
goto irq_done;
}
crc = be16_to_cpu(buffer[offset + 16]) << 16 | be16_to_cpu(buffer[offset + 15]);
valid = adis16480_validate_crc((u16 *)&buffer[offset], 15, crc);
if (!valid) {
dev_err(&adis->spi->dev, "Invalid crc\n");
goto irq_done;
}
for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
/*
* When burst mode is used, temperature is the first data
* channel in the sequence, but the temperature scan index
* is 10.
*/
switch (bit) {
case ADIS16480_SCAN_TEMP:
st->data[i++] = buffer[offset + 1];
break;
case ADIS16480_SCAN_GYRO_X ... ADIS16480_SCAN_ACCEL_Z:
/* The lower register data is sequenced first */
st->data[i++] = buffer[2 * bit + offset + 3];
st->data[i++] = buffer[2 * bit + offset + 2];
break;
}
}
iio_push_to_buffers_with_timestamp(indio_dev, st->data, pf->timestamp);
irq_done:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static const struct iio_info adis16480_info = {
.read_raw = &adis16480_read_raw,
.write_raw = &adis16480_write_raw,
......@@ -1341,7 +1474,8 @@ static int adis16480_probe(struct spi_device *spi)
st->clk_freq = st->chip_info->int_clk;
}
ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev,
adis16480_trigger_handler);
if (ret)
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment