dt-bindings: opp: Convert to DT schema

Convert the OPP v1 and v2 bindings to DT schema format. As the OPPv2 binding
can be extended by vendors, we need to split the common part out from the
"operating-points-v2" conforming compatible.

Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt

@@ -11,7 +11,7 @@ Required properties:
 - None
 
 Optional properties:
-- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for
   details. OPPs *must* be supplied either via DT, i.e. this property, or
   populated at runtime.
 - clock-latency: Specify the possible maximum transition latency for clock,

Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt

@@ -10,7 +10,7 @@ Required properties:
 			  transition and not stable yet.
 	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
 	generic clock consumer properties.
-- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
+- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
 	for detail.
 - proc-supply: Regulator for Vproc of CPU cluster.
 

Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt

@@ -6,8 +6,6 @@ from the SoC, then supplies the OPP framework with 'prop' and 'supported
 hardware' information respectively.  The framework is then able to read
 the DT and operate in the usual way.
 
-For more information about the expected DT format [See: ../opp/opp.txt].
-
 Frequency Scaling only
 ----------------------
 
@@ -15,7 +13,7 @@ No vendor specific driver required for this.
 
 Located in CPU's node:
 
-- operating-points		: [See: ../power/opp.txt]
+- operating-points		: [See: ../power/opp-v1.yaml]
 
 Example [safe]
 --------------
@@ -37,7 +35,7 @@ This requires the ST CPUFreq driver to supply 'process' and 'version' info.
 
 Located in CPU's node:
 
-- operating-points-v2		: [See ../power/opp.txt]
+- operating-points-v2		: [See ../power/opp-v2.yaml]
 
 Example [unsafe]
 ----------------

Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt

@@ -4,7 +4,7 @@ Binding for NVIDIA Tegra20 CPUFreq
 Required properties:
 - clocks: Must contain an entry for the CPU clock.
   See ../clocks/clock-bindings.txt for details.
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
+- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details.
 - #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details.
 
 For each opp entry in 'operating-points-v2' table:

Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt

@@ -8,7 +8,7 @@ Required properties:
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp.txt
+- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
 			 for details.
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.

Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml

@@ -18,6 +18,9 @@ description: |
   sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
   provide the OPP framework with required information.
 
+allOf:
+  - $ref: opp-v2-base.yaml#
+
 properties:
   compatible:
     const: allwinner,sun50i-h6-operating-points
@@ -43,6 +46,7 @@ patternProperties:
 
     properties:
       opp-hz: true
+      clock-latency-ns: true
 
     patternProperties:
       "opp-microvolt-.*": true

Documentation/devicetree/bindings/opp/opp-v1.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) v1 Bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |+
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This binding only supports voltage-frequency pairs.
+
+select: true
+
+properties:
+  operating-points:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Frequency in kHz
+        - description: Voltage for OPP in uV
+
+
+additionalProperties: true
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            operating-points =
+                /* kHz    uV */
+                <792000 1100000>,
+                <396000 950000>,
+                <198000 850000>;
+        };
+    };
+...

Documentation/devicetree/bindings/opp/opp-v2-base.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Common Binding
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This describes the OPPs belonging to a device.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: '^opp-table(-[a-z0-9]+)?$'
+
+  opp-shared:
+    description:
+      Indicates that device nodes using this OPP Table Node's phandle switch
+      their DVFS state together, i.e. they share clock/voltage/current lines.
+      Missing property means devices have independent clock/voltage/current
+      lines, but they share OPP tables.
+    type: boolean
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    description:
+      One or more OPP nodes describing voltage-current-frequency combinations.
+      Their name isn't significant but their phandle can be used to reference an
+      OPP. These are mandatory except for the case where the OPP table is
+      present only to indicate dependency between devices using the opp-shared
+      property.
+
+    properties:
+      opp-hz:
+        description:
+          Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
+          required property for all device nodes, unless another "required"
+          property to uniquely identify the OPP nodes exists. Devices like power
+          domains must have another (implementation dependent) property.
+
+      opp-microvolt:
+        description: |
+          Voltage for the OPP
+
+          A single regulator's voltage is specified with an array of size one or three.
+          Single entry is for target voltage and three entries are for <target min max>
+          voltages.
+
+          Entries for multiple regulators shall be provided in the same field separated
+          by angular brackets <>. The OPP binding doesn't provide any provisions to
+          relate the values to their power supplies or the order in which the supplies
+          need to be configured and that is left for the implementation specific
+          binding.
+
+          Entries for all regulators shall be of the same size, i.e. either all use a
+          single value or triplets.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      opp-microamp:
+        description: |
+          The maximum current drawn by the device in microamperes considering
+          system specific parameters (such as transients, process, aging,
+          maximum operating temperature range etc.) as necessary. This may be
+          used to set the most efficient regulator operating mode.
+
+          Should only be set if opp-microvolt or opp-microvolt-<name> is set for
+          the OPP.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If current values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      opp-level:
+        description:
+          A value representing the performance level of the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      opp-peak-kBps:
+        description:
+          Peak bandwidth in kilobytes per second, expressed as an array of
+          32-bit big-endian integers. Each element of the array represents the
+          peak bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      opp-avg-kBps:
+        description:
+          Average bandwidth in kilobytes per second, expressed as an array
+          of 32-bit big-endian integers. Each element of the array represents the
+          average bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths. This property is only
+          meaningful in OPP tables where opp-peak-kBps is present.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      clock-latency-ns:
+        description:
+          Specifies the maximum possible transition latency (in nanoseconds) for
+          switching to this OPP from any other OPP.
+
+      turbo-mode:
+        description:
+          Marks the OPP to be used only for turbo modes. Turbo mode is available
+          on some platforms, where the device can run over its operating
+          frequency for a short duration of time limited by the device's power,
+          current and thermal limits.
+        type: boolean
+
+      opp-suspend:
+        description:
+          Marks the OPP to be used during device suspend. If multiple OPPs in
+          the table have this, the OPP with highest opp-hz will be used.
+        type: boolean
+
+      opp-supported-hw:
+        description: |
+          This property allows a platform to enable only a subset of the OPPs
+          from the larger set present in the OPP table, based on the current
+          version of the hardware (already known to the operating system).
+
+          Each block present in the array of blocks in this property, represents
+          a sub-group of hardware versions supported by the OPP. i.e. <sub-group
+          A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these
+          sub-groups match the hardware's version.
+
+          Each sub-group is a platform defined array representing the hierarchy
+          of hardware versions supported by the platform. For a platform with
+          three hierarchical levels of version (X.Y.Z), this field shall look
+          like
+
+          opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
+
+          Each level (eg. X1) in version hierarchy is represented by a 32 bit
+          value, one bit per version and so there can be maximum 32 versions per
+          level. Logical AND (&) operation is performed for each level with the
+          hardware's level version and a non-zero output for _all_ the levels in
+          a sub-group means the OPP is supported by hardware. A value of
+          0xFFFFFFFF for each level in the sub-group will enable the OPP for all
+          versions for the hardware.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        maxItems: 32
+        items:
+          minItems: 1
+          maxItems: 4
+
+      required-opps:
+        description:
+          This contains phandle to an OPP node in another device's OPP table. It
+          may contain an array of phandles, where each phandle points to an OPP
+          of a different device. It should not contain multiple phandles to the
+          OPP nodes in the same OPP table. This specifies the minimum required
+          OPP of the device(s), whose OPP's phandle is present in this property,
+          for the functioning of the current device at the current OPP (where
+          this property is present).
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+
+    patternProperties:
+      '^opp-microvolt-':
+        description:
+          Named opp-microvolt property. This is exactly similar to the above
+          opp-microvolt property, but allows multiple voltage ranges to be
+          provided for the same OPP. At runtime, the platform can pick a <name>
+          and matching opp-microvolt-<name> property will be enabled for all
+          OPPs. If the platform doesn't pick a specific <name> or the <name>
+          doesn't match with any opp-microvolt-<name> properties, then
+          opp-microvolt property shall be used, if present.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      '^opp-microamp-':
+        description:
+          Named opp-microamp property. Similar to opp-microvolt-<name> property,
+          but for microamp instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+    dependencies:
+      opp-avg-kBps: [ opp-peak-kBps ]
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/opp/qcom-opp.txt

 Qualcomm OPP bindings to describe OPP nodes
 
 The bindings are based on top of the operating-points-v2 bindings
-described in Documentation/devicetree/bindings/opp/opp.txt
+described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml
 Additional properties are described below.
 
 * OPP Table Node

Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt

@@ -13,7 +13,7 @@ regulators to the device that will undergo OPP transitions we can make use
 of the multi regulator binding that is part of the OPP core described here [1]
 to describe both regulators needed by the platform.
 
-[1] Documentation/devicetree/bindings/opp/opp.txt
+[1] Documentation/devicetree/bindings/opp/opp-v2.yaml
 
 Required Properties for Device Node:
 - vdd-supply: phandle to regulator controlling VDD supply

Documentation/devicetree/bindings/power/power-domain.yaml

@@ -46,7 +46,7 @@ properties:
       Phandles to the OPP tables of power domains provided by a power domain
       provider. If the provider provides a single power domain only or all
       the power domains provided by the provider have identical OPP tables,
-      then this shall contain a single phandle. Refer to ../opp/opp.txt
+      then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml
       for more information.
 
   "#power-domain-cells":