RDMA/hns: Add CM of vlan device support

This patch mainly sets the vlan_id field in the WC for rdma_listen() to
work over vlan. This is required by ib_init_ah_attr_from_wc() which is
called by the CM REQ handler.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

drivers/infiniband/hw/hns/hns_roce_hw_v2.c

@@ -2292,7 +2292,14 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 		wc->smac[5] = roce_get_field(cqe->byte_28,
 					     V2_CQE_BYTE_28_SMAC_5_M,
 					     V2_CQE_BYTE_28_SMAC_5_S);
-		wc->vlan_id = 0xffff;
+		if (roce_get_bit(cqe->byte_28, V2_CQE_BYTE_28_VID_VLD_S)) {
+			wc->vlan_id = (u16)roce_get_field(cqe->byte_28,
+							  V2_CQE_BYTE_28_VID_M,
+							  V2_CQE_BYTE_28_VID_S);
+		} else {
+			wc->vlan_id = 0xffff;
+		}
+
 		wc->wc_flags |= (IB_WC_WITH_VLAN | IB_WC_WITH_SMAC);
 		wc->network_hdr_type = roce_get_field(cqe->byte_28,
 						    V2_CQE_BYTE_28_PORT_TYPE_M,

drivers/infiniband/hw/hns/hns_roce_hw_v2.h

@@ -818,6 +818,11 @@ struct hns_roce_v2_cqe {
 #define	V2_CQE_BYTE_28_PORT_TYPE_S 16
 #define V2_CQE_BYTE_28_PORT_TYPE_M GENMASK(17, 16)
 
+#define V2_CQE_BYTE_28_VID_S 18
+#define V2_CQE_BYTE_28_VID_M GENMASK(29, 18)
+
+#define V2_CQE_BYTE_28_VID_VLD_S 30
+
 #define	V2_CQE_BYTE_32_RMT_QPN_S 0
 #define V2_CQE_BYTE_32_RMT_QPN_M GENMASK(23, 0)