dt-bindings: thermal: rcar-gen3-thermal: Support five TSC nodes on r8a779a0

When adding support for V3U (r8a779a0) it was incorrectly recorded it
supports four nodes, while in fact it supports five. The fifth node is
named TSC0 and breaks the existing naming schema starting at 1. Work
around this by separately defining the reg property for V3U and others.

Restore the maximum number of nodes to three for other compatibles as
it was before erroneously increasing it for V3U.

Fixes: d7fdfb65 ("dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210310110716.3297544-1-niklas.soderlund+renesas@ragnatech.se

Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml

@@ -28,14 +28,7 @@ properties:
       - renesas,r8a77980-thermal # R-Car V3H
       - renesas,r8a779a0-thermal # R-Car V3U
 
-  reg:
-    minItems: 2
-    maxItems: 4
-    items:
-      - description: TSC1 registers
-      - description: TSC2 registers
-      - description: TSC3 registers
-      - description: TSC4 registers
+  reg: true
 
   interrupts:
     items:
@@ -71,8 +64,25 @@ if:
           enum:
             - renesas,r8a779a0-thermal
 then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 3
+      items:
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
   required:
     - interrupts
+else:
+  properties:
+    reg:
+      items:
+        - description: TSC0 registers
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
+        - description: TSC4 registers
 
 additionalProperties: false
 
@@ -111,3 +121,20 @@ examples:
                     };
             };
     };
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    tsc_r8a779a0: thermal@e6190000 {
+            compatible = "renesas,r8a779a0-thermal";
+            reg = <0xe6190000 0x200>,
+                  <0xe6198000 0x200>,
+                  <0xe61a0000 0x200>,
+                  <0xe61a8000 0x200>,
+                  <0xe61b0000 0x200>;
+            clocks = <&cpg CPG_MOD 919>;
+            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+            resets = <&cpg 919>;
+            #thermal-sensor-cells = <1>;
+    };