Commit 94715d59 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Felipe Balbi

arm: omap: hwmod: add a new addr space in otg for writing to control module

The mailbox register for usb otg in omap is present in control module.
On detection of any events VBUS or ID, this register should be written
to send the notification to musb core.

Till we have a separate control module driver to write to control module,
omap2430 will handle the register writes to control module by itself. So
a new address space to represent this control module register is added
to usb_otg_hs.
Acked-by: default avatarBenoit Cousson <b-cousson@ti.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 28dd924a
...@@ -5890,6 +5890,12 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { ...@@ -5890,6 +5890,12 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
.pa_end = 0x4a0ab003, .pa_end = 0x4a0ab003,
.flags = ADDR_TYPE_RT .flags = ADDR_TYPE_RT
}, },
{
/* XXX: Remove this once control module driver is in place */
.pa_start = 0x4a00233c,
.pa_end = 0x4a00233f,
.flags = ADDR_TYPE_RT
},
{ } { }
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment