ARM: dts: imx6: set ahb-burst-config as 0 for USB

After setting ahb burst configuration as 0, we can increase tx/rx
burst size, it will improve the USB performance
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6qdl.dtsi

@@ -906,6 +906,7 @@ usbotg: usb@02184000 {
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -917,6 +918,7 @@ usbh1: usb@02184200 {
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -927,6 +929,7 @@ usbh2: usb@02184400 {
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -937,6 +940,7 @@ usbh3: usb@02184600 {
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 3>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6sl.dtsi

@@ -708,6 +708,7 @@ usbotg1: usb@02184000 {
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -718,6 +719,7 @@ usbotg2: usb@02184200 {
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -728,6 +730,7 @@ usbh: usb@02184400 {
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6sx.dtsi

@@ -783,6 +783,7 @@ usbotg1: usb@02184000 {
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -793,6 +794,7 @@ usbotg2: usb@02184200 {
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -805,6 +807,7 @@ usbh: usb@02184400 {
 				phy_type = "hsic";
 				fsl,anatop = <&anatop>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6ul.dtsi

@@ -548,6 +548,7 @@ usbotg1: usb@02184000 {
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};
 
@@ -558,6 +559,7 @@ usbotg2: usb@02184200 {
 				clocks = <&clks IMX6UL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
 				status = "disabled";
 			};