ath11k: Add wmi peer create conf event in wmi_tlv_event_id

When the driver sends a peer create cmd, the firmware responds with
WMI_PEER_CREATE_CONF_EVENTID to confirm the firmware received
WMI_PEER_CREATE_CMDID. Since the peer create conf event is not handled
in ath11k_wmi_tlv_op_rx, we are getting unknown event id warning prints
during peer creation.

Add WMI_PEER_CREATE_CONF_EVENTID in wmi_tlv_event_id and handle
the same as unsupported event id under wmi logs.

warning prints:
[ 4382.230817] ath11k_pci 0000:01:00.0: Unknown eventid: 0x601a

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1
Signed-off-by: P Praneesh <ppranees@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-9-jouni@codeaurora.org

drivers/net/wireless/ath/ath11k/wmi.c

@@ -7130,6 +7130,7 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
 	case WMI_TWT_ENABLE_EVENTID:
 	case WMI_TWT_DISABLE_EVENTID:
 	case WMI_PDEV_DMA_RING_CFG_RSP_EVENTID:
+	case WMI_PEER_CREATE_CONF_EVENTID:
 		ath11k_dbg(ab, ATH11K_DBG_WMI,
 			   "ignoring unsupported event 0x%x\n", id);
 		break;

drivers/net/wireless/ath/ath11k/wmi.h

@@ -663,6 +663,9 @@ enum wmi_tlv_event_id {
 	WMI_PEER_RESERVED9_EVENTID,
 	WMI_PEER_RESERVED10_EVENTID,
 	WMI_PEER_OPER_MODE_CHANGE_EVENTID,
+	WMI_PEER_TX_PN_RESPONSE_EVENTID,
+	WMI_PEER_CFR_CAPTURE_EVENTID,
+	WMI_PEER_CREATE_CONF_EVENTID,
 	WMI_MGMT_RX_EVENTID = WMI_TLV_CMD(WMI_GRP_MGMT),
 	WMI_HOST_SWBA_EVENTID,
 	WMI_TBTTOFFSET_UPDATE_EVENTID,