Commit 94e9108b authored by Ed Lin's avatar Ed Lin Committed by James Bottomley

[SCSI] stex: add new device type support

Add support for st_vsc1 type device (st_vsc is ok because it does not
require extra buffer).
Signed-off-by: default avatarEd Lin <ed.lin@promise.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent ee926b27
......@@ -121,7 +121,8 @@ enum {
st_shasta = 0,
st_vsc = 1,
st_yosemite = 2,
st_vsc1 = 2,
st_yosemite = 3,
PASSTHRU_REQ_TYPE = 0x00000001,
PASSTHRU_REQ_NO_WAKEUP = 0x00000100,
......@@ -151,6 +152,8 @@ enum {
MGT_CMD_SIGNATURE = 0xba,
INQUIRY_EVPD = 0x01,
ST_ADDITIONAL_MEM = 0x200000,
};
/* SCSI inquiry data */
......@@ -212,7 +215,9 @@ struct handshake_frame {
__le32 partner_ver_minor;
__le32 partner_ver_oem;
__le32 partner_ver_build;
u32 reserved1[4];
__le32 extra_offset; /* NEW */
__le32 extra_size; /* NEW */
u32 reserved1[2];
};
struct req_msg {
......@@ -303,6 +308,7 @@ struct st_hba {
void __iomem *mmio_base; /* iomapped PCI memory space */
void *dma_mem;
dma_addr_t dma_handle;
size_t dma_size;
struct Scsi_Host *host;
struct pci_dev *pdev;
......@@ -941,6 +947,11 @@ static int stex_handshake(struct st_hba *hba)
h->status_cnt = cpu_to_le16(MU_STATUS_COUNT);
stex_gettime(&h->hosttime);
h->partner_type = HMU_PARTNER_TYPE;
if (hba->dma_size > STEX_BUFFER_SIZE) {
h->extra_offset = cpu_to_le32(STEX_BUFFER_SIZE);
h->extra_size = cpu_to_le32(ST_ADDITIONAL_MEM);
} else
h->extra_offset = h->extra_size = 0;
status_phys = hba->dma_handle + MU_REQ_BUFFER_SIZE;
writel(status_phys, base + IMR0);
......@@ -1203,8 +1214,13 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_iounmap;
}
hba->cardtype = (unsigned int) id->driver_data;
if (hba->cardtype == st_vsc && (pdev->subsystem_device & 0xf) == 0x1)
hba->cardtype = st_vsc1;
hba->dma_size = (hba->cardtype == st_vsc1) ?
(STEX_BUFFER_SIZE + ST_ADDITIONAL_MEM) : (STEX_BUFFER_SIZE);
hba->dma_mem = dma_alloc_coherent(&pdev->dev,
STEX_BUFFER_SIZE, &hba->dma_handle, GFP_KERNEL);
hba->dma_size, &hba->dma_handle, GFP_KERNEL);
if (!hba->dma_mem) {
err = -ENOMEM;
printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n",
......@@ -1217,8 +1233,6 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE;
hba->mu_status = MU_STATE_STARTING;
hba->cardtype = (unsigned int) id->driver_data;
/* firmware uses id/lun pair for a logical drive, but lun would be
always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use
channel to map lun here */
......@@ -1266,7 +1280,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
out_free_irq:
free_irq(pdev->irq, hba);
out_pci_free:
dma_free_coherent(&pdev->dev, STEX_BUFFER_SIZE,
dma_free_coherent(&pdev->dev, hba->dma_size,
hba->dma_mem, hba->dma_handle);
out_iounmap:
iounmap(hba->mmio_base);
......@@ -1327,7 +1341,7 @@ static void stex_hba_free(struct st_hba *hba)
pci_release_regions(hba->pdev);
dma_free_coherent(&hba->pdev->dev, STEX_BUFFER_SIZE,
dma_free_coherent(&hba->pdev->dev, hba->dma_size,
hba->dma_mem, hba->dma_handle);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment