Skip to content

L
linux
Commit 959f85f8 authored by Paul Mundt's avatar Paul Mundt
Browse files
Options

sh: Consolidated SH7751/SH7780 PCI support. 

This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent e108b2ca
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 984 additions and 1520 deletions
arch/sh/boards/landisk/Makefile
View file @ 959f85f8
......@@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o rtc.o landisk_pwb.o
obj-$(CONFIG_PCI) += pci.o
arch/sh/boards/landisk/io.c
View file @ 959f85f8
......@@ -14,39 +14,16 @@
* modifed by kogiidena
* 2005.03.03
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/landisk/iodata_landisk.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "../../drivers/pci/pci-sh7751.h"
extern void *area5_io_base; /* Area 5 I/O Base address */
extern void *area6_io_base; /* Area 6 I/O Base address */
/*
* The 7751R LANDISK uses the built-in PCI controller (PCIC)
* of the 7751R processor, and has a SuperIO accessible via the PCI.
* The board also includes a PCMCIA controller on its memory bus,
* like the other Solution Engine boards.
*/
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline unsigned long port2adr(unsigned int port)
{
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
......@@ -67,17 +44,6 @@ static inline unsigned long port2adr(unsigned int port)
return port;
}
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#else
#define CHECK_SH_7751_PCIIO(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
......@@ -89,8 +55,8 @@ u8 landisk_inb(unsigned long port)
{
if (PXSEG(port))
return ctrl_inb(port);
else if (CHECK_SH7751_PCIIO(port))
return ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
return ctrl_inb(pci_ioaddr(port));
return ctrl_inw(port2adr(port)) & 0xff;
}
......@@ -101,12 +67,12 @@ u8 landisk_inb_p(unsigned long port)
if (PXSEG(port))
v = ctrl_inb(port);
else if (CHECK_SH7751_PCIIO(port))
v = ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
delay();
ctrl_delay();
return v;
}
......@@ -115,8 +81,8 @@ u16 landisk_inw(unsigned long port)
{
if (PXSEG(port))
return ctrl_inw(port);
else if (CHECK_SH7751_PCIIO(port))
return ctrl_inw(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
return ctrl_inw(pci_ioaddr(port));
else
maybebadio(port);
......@@ -127,8 +93,8 @@ u32 landisk_inl(unsigned long port)
{
if (PXSEG(port))
return ctrl_inl(port);
else if (CHECK_SH7751_PCIIO(port))
return ctrl_inl(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
return ctrl_inl(pci_ioaddr(port));
else
maybebadio(port);
......@@ -139,8 +105,8 @@ void landisk_outb(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
}
......@@ -149,19 +115,19 @@ void landisk_outb_p(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
delay();
ctrl_delay();
}
void landisk_outw(u16 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outw(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outw(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outw(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -170,8 +136,8 @@ void landisk_outl(u32 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outl(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outl(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -184,8 +150,8 @@ void landisk_insb(unsigned long port, void *dst, unsigned long count)
if (PXSEG(port)) {
while (count--)
*buf++ = *(volatile u8 *)port;
} else if (CHECK_SH7751_PCIIO(port)) {
volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
} else if (is_pci_ioaddr(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*buf++ = *bp;
......@@ -203,8 +169,8 @@ void landisk_insw(unsigned long port, void *dst, unsigned long count)
if (PXSEG(port))
p = (volatile u16 *)port;
else if (CHECK_SH7751_PCIIO(port))
p = (volatile u16 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
while (count--)
......@@ -215,8 +181,8 @@ void landisk_insl(unsigned long port, void *dst, unsigned long count)
{
u32 *buf = dst;
if (CHECK_SH7751_PCIIO(port)) {
volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
if (is_pci_ioaddr(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
while (count--)
*buf++ = *p;
......@@ -232,8 +198,8 @@ void landisk_outsb(unsigned long port, const void *src, unsigned long count)
if (PXSEG(port))
while (count--)
ctrl_outb(*buf++, port);
else if (CHECK_SH7751_PCIIO(port)) {
volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*bp = *buf++;
......@@ -251,8 +217,8 @@ void landisk_outsw(unsigned long port, const void *src, unsigned long count)
if (PXSEG(port))
p = (volatile u16 *)port;
else if (CHECK_SH7751_PCIIO(port))
p = (volatile u16 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
......@@ -264,8 +230,8 @@ void landisk_outsl(unsigned long port, const void *src, unsigned long count)
{
const u32 *buf = src;
if (CHECK_SH7751_PCIIO(port)) {
volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
if (is_pci_ioaddr(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
while (count--)
*p = *buf++;
......@@ -277,8 +243,8 @@ void __iomem *landisk_ioport_map(unsigned long port, unsigned int size)
{
if (PXSEG(port))
return (void __iomem *)port;
else if (CHECK_SH7751_PCIIO(port))
return (void __iomem *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
arch/sh/boards/mpc1211/setup.c
View file @ 959f85f8
......@@ -255,23 +255,12 @@ void __init init_mpc1211_IRQ(void)
}
}
/*
Initialize the board
*/
static void delay (void)
{
volatile unsigned short tmp;
tmp = *(volatile unsigned short *) 0xa0000000;
}
static void delay1000 (void)
static void delay1000(void)
{
int i;
for (i=0; i<1000; i++)
delay ();
ctrl_delay();
}
static int put_smb_blk(unsigned char *p, int address, int command, int no)
......
arch/sh/boards/renesas/hs7751rvoip/io.c
View file @ 959f85f8
......@@ -13,14 +13,11 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/hs7751rvoip/hs7751rvoip.h>
#include <asm/addrspace.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "../../../drivers/pci/pci-sh7751.h"
extern void *area6_io8_base; /* Area 6 8bit I/O Base address */
extern void *area5_io16_base; /* Area 5 16bit I/O Base address */
......@@ -31,27 +28,17 @@ extern void *area5_io16_base; /* Area 5 16bit I/O Base address */
* like the other Solution Engine boards.
*/
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
#define CODEC_IO_BASE 0x1000
#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline unsigned long port2adr(unsigned int port)
{
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
if (port == 0x3f6)
return ((unsigned long)area5_io16_base + 0x0c);
else
return ((unsigned long)area5_io16_base + 0x800 + ((port-0x1f0) << 1));
return ((unsigned long)area5_io16_base + 0x800 +
((port-0x1f0) << 1));
else
maybebadio((unsigned long)port);
return port;
......@@ -70,25 +57,10 @@ static inline int shifted_port(unsigned long port)
}
#if defined(CONFIG_HS7751RVOIP_CODEC)
static inline int
codec_port(unsigned long port)
{
if (CODEC_IO_BASE <= port && port < (CODEC_IO_BASE+0x20))
return 1;
else
return 0;
}
#endif
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#define codec_port(port) \
((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
#else
#define CHECK_SH7751_PCIIO(port) (0)
#define codec_port(port) (0)
#endif
/*
......@@ -102,12 +74,10 @@ unsigned char hs7751rvoip_inb(unsigned long port)
{
if (PXSEG(port))
return ctrl_inb(port);
#if defined(CONFIG_HS7751RVOIP_CODEC)
else if (codec_port(port))
return ctrl_inb(CODEC_IOMAP(port));
#endif
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
return ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inb(pci_ioaddr(port));
else
return ctrl_inw(port2adr(port)) & 0xff;
}
......@@ -118,15 +88,13 @@ unsigned char hs7751rvoip_inb_p(unsigned long port)
if (PXSEG(port))
v = ctrl_inb(port);
#if defined(CONFIG_HS7751RVOIP_CODEC)
else if (codec_port(port))
v = ctrl_inb(CODEC_IOMAP(port));
#endif
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
v = ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
delay();
ctrl_delay();
return v;
}
......@@ -134,8 +102,8 @@ unsigned short hs7751rvoip_inw(unsigned long port)
{
if (PXSEG(port))
return ctrl_inw(port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
return ctrl_inw(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inw(pci_ioaddr(port));
else
maybebadio(port);
return 0;
......@@ -145,8 +113,8 @@ unsigned int hs7751rvoip_inl(unsigned long port)
{
if (PXSEG(port))
return ctrl_inl(port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
return ctrl_inl(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inl(pci_ioaddr(port));
else
maybebadio(port);
return 0;
......@@ -157,12 +125,10 @@ void hs7751rvoip_outb(unsigned char value, unsigned long port)
if (PXSEG(port))
ctrl_outb(value, port);
#if defined(CONFIG_HS7751RVOIP_CODEC)
else if (codec_port(port))
ctrl_outb(value, CODEC_IOMAP(port));
#endif
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outb(value, port2adr(port));
}
......@@ -171,24 +137,22 @@ void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
#if defined(CONFIG_HS7751RVOIP_CODEC)
else if (codec_port(port))
ctrl_outb(value, CODEC_IOMAP(port));
#endif
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
delay();
ctrl_delay();
}
void hs7751rvoip_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
ctrl_outw(value, port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
ctrl_outw(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outw(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -197,8 +161,8 @@ void hs7751rvoip_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
ctrl_outl(value, port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
ctrl_outl(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -210,13 +174,11 @@ void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
if (PXSEG(port))
while (count--)
*buf++ = ctrl_inb(port);
#if defined(CONFIG_HS7751RVOIP_CODEC)
else if (codec_port(port))
while (count--)
*buf++ = ctrl_inb(CODEC_IOMAP(port));
#endif
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*buf++ = *bp;
......@@ -235,8 +197,8 @@ void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
if (PXSEG(port))
p = (volatile u16 *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
p = (volatile u16 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
while (count--)
......@@ -246,8 +208,8 @@ void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
{
if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
u32 *buf = addr;
while (count--)
......@@ -263,13 +225,11 @@ void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count
if (PXSEG(port))
while (count--)
ctrl_outb(*buf++, port);
#if defined(CONFIG_HS7751RVOIP_CODEC)
else if (codec_port(port))
while (count--)
ctrl_outb(*buf++, CODEC_IOMAP(port));
#endif
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*bp = *buf++;
......@@ -288,8 +248,8 @@ void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count
if (PXSEG(port))
p = (volatile u16 *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
p = (volatile u16 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
......@@ -301,8 +261,8 @@ void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count
{
const u32 *buf = addr;
if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
while (count--)
*p = *buf++;
......@@ -316,8 +276,8 @@ void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
return (void __iomem *)port;
else if (unlikely(codec_port(port) && (size == 1)))
return (void __iomem *)CODEC_IOMAP(port);
else if (CHECK_SH7751_PCIIO(port))
return (void __iomem *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
arch/sh/boards/renesas/r7780rp/io.c
View file @ 959f85f8
/*
* linux/arch/sh/kernel/io_r7780rp.c
*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
......@@ -10,37 +8,13 @@
* placeholder code from io_r7780rp.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/r7780rp/r7780rp.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "../../../drivers/pci/pci-sh7780.h"
/*
* The 7780 R7780RP-1 uses the built-in PCI controller (PCIC)
* of the 7780 processor, and has a SuperIO accessible via the PCI.
* The board also includes a PCMCIA controller on its memory bus,
* like the other Solution Engine boards.
*/
#define SH7780_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
#define PCIIOBR (volatile long *)PCI_REG(SH7780_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7780_PCIMBR)
#define PCI_IO_AREA SH7780_PCI_IO_BASE
#define PCI_MEM_AREA SH7780_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7780_PCIIOBR_MASK))
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline unsigned long port2adr(unsigned int port)
{
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
......@@ -78,17 +52,6 @@ static inline int shifted_port(unsigned long port)
return 1;
}
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7780_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7780_PCI_IO_SIZE)))
#else
#define CHECK_SH7780_PCIIO(port) (0)
#endif
#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
#define CHECK_AX88796L_PORT(port) \
((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
......@@ -109,8 +72,8 @@ u8 r7780rp_inb(unsigned long port)
return ctrl_inw(port88796l(port, 0)) & 0xff;
else if (PXSEG(port))
return ctrl_inb(port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
return ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inb(pci_ioaddr(port));
return ctrl_inw(port2adr(port)) & 0xff;
}
......@@ -123,12 +86,12 @@ u8 r7780rp_inb_p(unsigned long port)
v = ctrl_inw(port88796l(port, 0)) & 0xff;
else if (PXSEG(port))
v = ctrl_inb(port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
v = ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
delay();
ctrl_delay();
return v;
}
......@@ -139,8 +102,8 @@ u16 r7780rp_inw(unsigned long port)
maybebadio(port);
else if (PXSEG(port))
return ctrl_inw(port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
return ctrl_inw(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inw(pci_ioaddr(port));
else
maybebadio(port);
......@@ -153,8 +116,8 @@ u32 r7780rp_inl(unsigned long port)
maybebadio(port);
else if (PXSEG(port))
return ctrl_inl(port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
return ctrl_inl(PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
return ctrl_inl(pci_ioaddr(port));
else
maybebadio(port);
......@@ -167,8 +130,8 @@ void r7780rp_outb(u8 value, unsigned long port)
ctrl_outw(value, port88796l(port, 0));
else if (PXSEG(port))
ctrl_outb(value, port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
}
......@@ -179,12 +142,12 @@ void r7780rp_outb_p(u8 value, unsigned long port)
ctrl_outw(value, port88796l(port, 0));
else if (PXSEG(port))
ctrl_outb(value, port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
delay();
ctrl_delay();
}
void r7780rp_outw(u16 value, unsigned long port)
......@@ -193,8 +156,8 @@ void r7780rp_outw(u16 value, unsigned long port)
maybebadio(port);
else if (PXSEG(port))
ctrl_outw(value, port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
ctrl_outw(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outw(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -205,8 +168,8 @@ void r7780rp_outl(u32 value, unsigned long port)
maybebadio(port);
else if (PXSEG(port))
ctrl_outl(value, port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
ctrl_outl(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port) || shifted_port(port))
ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -223,8 +186,8 @@ void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
} else if (PXSEG(port)) {
while (count--)
*buf++ = *(volatile u8 *)port;
} else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
} else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*buf++ = *bp;
......@@ -244,8 +207,8 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count)
p = (volatile u16 *)port88796l(port, 1);
else if (PXSEG(port))
p = (volatile u16 *)port;
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
p = (volatile u16 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
......@@ -259,8 +222,8 @@ void r7780rp_insl(unsigned long port, void *dst, unsigned long count)
if (CHECK_AX88796L_PORT(port))
maybebadio(port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
while (count--)
*buf++ = *p;
......@@ -280,8 +243,8 @@ void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
} else if (PXSEG(port))
while (count--)
ctrl_outb(*buf++, port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*bp = *buf++;
......@@ -301,8 +264,8 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
p = (volatile u16 *)port88796l(port, 1);
else if (PXSEG(port))
p = (volatile u16 *)port;
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
p = (volatile u16 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port2adr(port);
......@@ -316,8 +279,8 @@ void r7780rp_outsl(unsigned long port, const void *src, unsigned long count)
if (CHECK_AX88796L_PORT(port))
maybebadio(port);
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
while (count--)
*p = *buf++;
......@@ -331,8 +294,8 @@ void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size)
return (void __iomem *)port88796l(port, size > 1);
else if (PXSEG(port))
return (void __iomem *)port;
else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
return (void __iomem *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
arch/sh/boards/renesas/rts7751r2d/io.c
View file @ 959f85f8
/*
* linux/arch/sh/kernel/io_rts7751r2d.c
*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
......@@ -10,11 +8,9 @@
* placeholder code from io_rts7751r2d.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "../../../drivers/pci/pci-sh7751.h"
#include <asm/rts7751r2d/rts7751r2d.h>
#include <asm/io.h>
#include <asm/addrspace.h>
......@@ -26,18 +22,6 @@
* like the other Solution Engine boards.
*/
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline unsigned long port2adr(unsigned int port)
{
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
......@@ -75,17 +59,6 @@ static inline int shifted_port(unsigned long port)
return 1;
}
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#else
#define CHECK_SH7751_PCIIO(port) (0)
#endif
#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
#define CHECK_AX88796L_PORT(port) \
((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
......@@ -106,8 +79,8 @@ unsigned char rts7751r2d_inb(unsigned long port)
return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
else if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
return *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*(volatile unsigned short *)port2adr(port) & 0xff);
}
......@@ -120,11 +93,12 @@ unsigned char rts7751r2d_inb_p(unsigned long port)
v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
else if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
v = *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*(volatile unsigned short *)port2adr(port) & 0xff);
delay();
ctrl_delay();
return v;
}
......@@ -135,8 +109,8 @@ unsigned short rts7751r2d_inw(unsigned long port)
maybebadio(port);
else if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
return *(volatile unsigned short *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return *(volatile unsigned short *)pci_ioaddr(port);
else
maybebadio(port);
......@@ -149,8 +123,8 @@ unsigned int rts7751r2d_inl(unsigned long port)
maybebadio(port);
else if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
return *(volatile unsigned long *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
return *(volatile unsigned long *)pci_ioaddr(port);
else
maybebadio(port);
......@@ -163,8 +137,8 @@ void rts7751r2d_outb(unsigned char value, unsigned long port)
*((volatile unsigned short *)port88796l(port, 0)) = value;
else if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
*(volatile unsigned char *)PCI_IOMAP(port) = value;
else if (is_pci_ioaddr(port) || shifted_port(port))
*(volatile unsigned char *)pci_ioaddr(port) = value;
else
*(volatile unsigned short *)port2adr(port) = value;
}
......@@ -175,11 +149,12 @@ void rts7751r2d_outb_p(unsigned char value, unsigned long port)
*((volatile unsigned short *)port88796l(port, 0)) = value;
else if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
*(volatile unsigned char *)PCI_IOMAP(port) = value;
else if (is_pci_ioaddr(port) || shifted_port(port))
*(volatile unsigned char *)pci_ioaddr(port) = value;
else
*(volatile unsigned short *)port2adr(port) = value;
delay();
ctrl_delay();
}
void rts7751r2d_outw(unsigned short value, unsigned long port)
......@@ -188,8 +163,8 @@ void rts7751r2d_outw(unsigned short value, unsigned long port)
maybebadio(port);
else if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
*(volatile unsigned short *)PCI_IOMAP(port) = value;
else if (is_pci_ioaddr(port) || shifted_port(port))
*(volatile unsigned short *)pci_ioaddr(port) = value;
else
maybebadio(port);
}
......@@ -200,8 +175,8 @@ void rts7751r2d_outl(unsigned int value, unsigned long port)
maybebadio(port);
else if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
*(volatile unsigned long *)PCI_IOMAP(port) = value;
else if (is_pci_ioaddr(port) || shifted_port(port))
*(volatile unsigned long *)pci_ioaddr(port) = value;
else
maybebadio(port);
}
......@@ -219,8 +194,8 @@ void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count)
} else if (PXSEG(port))
while (count--)
ctrl_outb(ctrl_inb(port), a++);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
bp = (__u8 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port)) {
bp = (__u8 *)pci_ioaddr(port);
while (count--)
ctrl_outb(*bp, a++);
} else {
......@@ -239,8 +214,8 @@ void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count)
p = (volatile unsigned short *)port88796l(port, 1);
else if (PXSEG(port))
p = (volatile unsigned short *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
p = (volatile unsigned short *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile unsigned short *)pci_ioaddr(port);
else
p = (volatile unsigned short *)port2adr(port);
while (count--)
......@@ -251,11 +226,11 @@ void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count)
{
if (CHECK_AX88796L_PORT(port))
maybebadio(port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
else if (is_pci_ioaddr(port) || shifted_port(port)) {
unsigned long a = (unsigned long)addr;
while (count--) {
ctrl_outl(ctrl_inl(PCI_IOMAP(port)), a);
ctrl_outl(ctrl_inl(pci_ioaddr(port)), a);
a += 4;
}
} else
......@@ -275,8 +250,8 @@ void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count)
} else if (PXSEG(port))
while (count--)
ctrl_outb(a++, port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
bp = (__u8 *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port)) {
bp = (__u8 *)pci_ioaddr(port);
while (count--)
*bp = ctrl_inb(a++);
} else {
......@@ -295,8 +270,8 @@ void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count)
p = (volatile unsigned short *)port88796l(port, 1);
else if (PXSEG(port))
p = (volatile unsigned short *)port;
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
p = (volatile unsigned short *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port) || shifted_port(port))
p = (volatile unsigned short *)pci_ioaddr(port);
else
p = (volatile unsigned short *)port2adr(port);
......@@ -310,11 +285,11 @@ void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count)
{
if (CHECK_AX88796L_PORT(port))
maybebadio(port);
else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
else if (is_pci_ioaddr(port) || shifted_port(port)) {
unsigned long a = (unsigned long)addr;
while (count--) {
ctrl_outl(ctrl_inl(a), PCI_IOMAP(port));
ctrl_outl(ctrl_inl(a), pci_ioaddr(port));
a += 4;
}
} else
......
arch/sh/boards/renesas/systemh/io.c
View file @ 959f85f8
......@@ -5,36 +5,16 @@
* Based largely on io_se.c.
*
* I/O routine for Hitachi 7751 Systemh.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/systemh7751.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include "../../../drivers/pci/pci-sh7751.h"
/*
* The 7751 SystemH Engine uses the built-in PCI controller (PCIC)
* of the 7751 processor, and has a SuperIO accessible on its memory
* bus.
*/
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
of smc lan chip*/
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline volatile __u16 *
port2adr(unsigned int port)
{
......@@ -44,17 +24,6 @@ port2adr(unsigned int port)
return (volatile __u16*)port;
}
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#else
#define CHECK_SH7751_PCIIO(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
......@@ -66,8 +35,8 @@ unsigned char sh7751systemh_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
return *(volatile unsigned char *)ETHER_IOMAP(port);
else
......@@ -80,13 +49,13 @@ unsigned char sh7751systemh_inb_p(unsigned long port)
if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
v = *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
v = *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
v = *(volatile unsigned char *)ETHER_IOMAP(port);
else
v = (*port2adr(port))&0xff;
delay();
ctrl_delay();
return v;
}
......@@ -94,8 +63,8 @@ unsigned short sh7751systemh_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned short *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
......@@ -109,8 +78,8 @@ unsigned int sh7751systemh_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned int *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
......@@ -125,8 +94,8 @@ void sh7751systemh_outb(unsigned char value, unsigned long port)
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
......@@ -137,21 +106,21 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
*(port2adr(port)) = value;
delay();
ctrl_delay();
}
void sh7751systemh_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned short *)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else if (port <= 0x3F1)
......@@ -164,8 +133,8 @@ void sh7751systemh_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned long*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
......
arch/sh/boards/se/770x/io.c
View file @ 959f85f8
/* $Id: io.c,v 1.6 2006/01/04 17:53:54 lethal Exp $
/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
*
* linux/arch/sh/kernel/io_se.c
*
......@@ -20,11 +20,6 @@ int sh_pcic_io_stop;
int sh_pcic_io_type;
int sh_pcic_io_dummy;
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
/* MS7750 requires special versions of in*, out* routines, since
PC-like io ports are located at upper half byte of 16-bit word which
can be accessed only with 16-bit wide. */
......@@ -72,7 +67,7 @@ unsigned char se_inb_p(unsigned long port)
v = (*port2adr(port) >> 8);
else
v = (*port2adr(port))&0xff;
delay();
ctrl_delay();
return v;
}
......@@ -110,7 +105,7 @@ void se_outb_p(unsigned char value, unsigned long port)
*(port2adr(port)) = value << 8;
else
*(port2adr(port)) = value;
delay();
ctrl_delay();
}
void se_outw(unsigned short value, unsigned long port)
......
arch/sh/boards/se/7751/io.c
View file @ 959f85f8
/*
* linux/arch/sh/kernel/io_7751se.c
*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
......@@ -10,55 +8,14 @@
* placeholder code from io_se.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/se7751.h>
#include <asm/addrspace.h>
#include <linux/pci.h>
#include "../../../drivers/pci/pci-sh7751.h"
#if 0
/******************************************************************
* Variables from io_se.c, related to PCMCIA (not PCI); we're not
* compiling them in, and have removed references from functions
* which follow. [Many checked for IO ports in the range bounded
* by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset.
* As start/stop are uninitialized, only port 0x0 would match?]
* When used, remember to adjust names to avoid clash with io_se?
*****************************************************************/
/* SH pcmcia io window base, start and end. */
int sh_pcic_io_wbase = 0xb8400000;
int sh_pcic_io_start;
int sh_pcic_io_stop;
int sh_pcic_io_type;
int sh_pcic_io_dummy;
/*************************************************************/
#endif
/*
* The 7751 Solution Engine uses the built-in PCI controller (PCIC)
* of the 7751 processor, and has a SuperIO accessible via the PCI.
* The board also includes a PCMCIA controller on its memory bus,
* like the other Solution Engine boards.
*/
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline volatile __u16 *
port2adr(unsigned int port)
static inline volatile u16 *port2adr(unsigned int port)
{
if (port >= 0x2000)
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
......@@ -66,32 +23,6 @@ port2adr(unsigned int port)
return (volatile __u16*)port;
}
#if 0
/* The 7751 Solution Engine seems to have everything hooked */
/* up pretty normally (nothing on high-bytes only...) so this */
/* shouldn't be needed */
static inline int
shifted_port(unsigned long port)
{
/* For IDE registers, value is not shifted */
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
return 0;
else
return 1;
}
#endif
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#else
#define CHECK_SH7751_PCIIO(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
......@@ -103,10 +34,10 @@ unsigned char sh7751se_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port))&0xff;
return (*port2adr(port)) & 0xff;
}
unsigned char sh7751se_inb_p(unsigned long port)
......@@ -115,11 +46,11 @@ unsigned char sh7751se_inb_p(unsigned long port)
if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
v = *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port))&0xff;
delay();
v = (*port2adr(port)) & 0xff;
ctrl_delay();
return v;
}
......@@ -127,8 +58,8 @@ unsigned short sh7751se_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned short *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -140,8 +71,8 @@ unsigned int sh7751se_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned int *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -154,8 +85,8 @@ void sh7751se_outb(unsigned char value, unsigned long port)
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
......@@ -164,19 +95,19 @@ void sh7751se_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
delay();
ctrl_delay();
}
void sh7751se_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned short *)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
......@@ -187,8 +118,8 @@ void sh7751se_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned long*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
......@@ -202,35 +133,3 @@ void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
{
maybebadio(port);
}
/* Map ISA bus address to the real address. Only for PCMCIA. */
/* ISA page descriptor. */
static __u32 sh_isa_memmap[256];
#if 0
static int
sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
{
int idx;
if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
return -1;
idx = start >> 12;
sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
start, length, offset, idx, sh_isa_memmap[idx]);
return 0;
}
#endif
unsigned long
sh7751se_isa_port2addr(unsigned long offset)
{
int idx;
idx = (offset >> 12) & 0xff;
offset &= 0xfff;
return sh_isa_memmap[idx] + offset;
}
arch/sh/boards/sh03/setup.c
View file @ 959f85f8
......@@ -12,11 +12,10 @@
#include <asm/sh03/io.h>
#include <asm/sh03/sh03.h>
#include <asm/addrspace.h>
#include "../../drivers/pci/pci-sh7751.h"
const char *get_system_type(void)
{
return "Interface CTP/PCI-SH03)";
return "Interface (CTP/PCI-SH03)";
}
static void init_sh03_IRQ(void)
......@@ -39,7 +38,7 @@ static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
return (void __iomem *)((unsigned long)cf_io_base + port);
return (void __iomem *)(port + SH7751_PCI_IO_BASE);
return (void __iomem *)(port + PCI_IO_BASE);
}
struct sh_machine_vector mv_sh03 __initmv = {
......@@ -51,7 +50,6 @@ struct sh_machine_vector mv_sh03 __initmv = {
.mv_heartbeat = heartbeat_sh03,
#endif
};
ALIAS_MV(sh03)
/* arch/sh/boards/sh03/rtc.c */
......
arch/sh/boards/snapgear/io.c
View file @ 959f85f8
/*
* linux/arch/sh/kernel/io_7751se.c
*
/*
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
......@@ -11,54 +9,22 @@
* placeholder code from io_se.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/addrspace.h>
#include <asm/pci.h>
#include "../../drivers/pci/pci-sh7751.h"
#ifdef CONFIG_SH_SECUREEDGE5410
unsigned short secureedge5410_ioport;
#endif
/*
* The SnapGear uses the built-in PCI controller (PCIC)
* of the 7751 processor
*/
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline volatile __u16 *port2adr(unsigned int port)
{
maybebadio((unsigned long)port);
return (volatile __u16*)port;
}
/* In case someone configures the kernel w/o PCI support: in that */
/* scenario, don't ever bother to check for PCI-window addresses */
/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#else
#define CHECK_SH7751_PCIIO(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
......@@ -66,39 +32,36 @@ static inline volatile __u16 *port2adr(unsigned int port)
* should be way beyond the window, and is used w/o translation for
* compatibility.
*/
unsigned char snapgear_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port))&0xff;
return (*port2adr(port)) & 0xff;
}
unsigned char snapgear_inb_p(unsigned long port)
{
unsigned char v;
if (PXSEG(port))
v = *(volatile unsigned char *)port;
else if (CHECK_SH7751_PCIIO(port))
v = *(volatile unsigned char *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port))&0xff;
delay();
v = (*port2adr(port))&0xff;
ctrl_delay();
return v;
}
unsigned short snapgear_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned short *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -106,13 +69,12 @@ unsigned short snapgear_inw(unsigned long port)
return 0;
}
unsigned int snapgear_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
else if (CHECK_SH7751_PCIIO(port))
return *(volatile unsigned int *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
......@@ -120,50 +82,46 @@ unsigned int snapgear_inl(unsigned long port)
return 0;
}
void snapgear_outb(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
void snapgear_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned char*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
delay();
ctrl_delay();
}
void snapgear_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned short *)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
maybebadio(port);
}
void snapgear_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
else if (CHECK_SH7751_PCIIO(port))
*((unsigned long*)PCI_IOMAP(port)) = value;
else if (is_pci_ioaddr(port))
*((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
......
arch/sh/boards/titan/io.c
View file @ 959f85f8
/*
* I/O routines for Titan
*/
#include <linux/pci.h>
#include <asm/machvec.h>
#include <asm/addrspace.h>
#include <asm/titan.h>
#include <asm/io.h>
#include "../../drivers/pci/pci-sh7751.h"
#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
#define PCI_IO_AREA SH7751_PCI_IO_BASE
#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
#if defined(CONFIG_PCI)
#define CHECK_SH7751_PCIIO(port) \
((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
#define CHECK_SH7751_PCIMEMIO(port) \
((port >= PCIBIOS_MIN_MEM) && (port < (PCIBIOS_MIN_MEM + SH7751_PCI_MEM_SIZE)))
#else
#define CHECK_SH7751_PCIIO(port) (0)
#endif
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
static inline unsigned int port2adr(unsigned int port)
{
......@@ -40,8 +17,8 @@ u8 titan_inb(unsigned long port)
{
if (PXSEG(port))
return ctrl_inb(port);
else if (CHECK_SH7751_PCIIO(port))
return ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
return ctrl_inb(pci_ioaddr(port));
return ctrl_inw(port2adr(port)) & 0xff;
}
......@@ -51,11 +28,11 @@ u8 titan_inb_p(unsigned long port)
if (PXSEG(port))
v = ctrl_inb(port);
else if (CHECK_SH7751_PCIIO(port))
v = ctrl_inb(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
delay();
ctrl_delay();
return v;
}
......@@ -63,8 +40,8 @@ u16 titan_inw(unsigned long port)
{
if (PXSEG(port))
return ctrl_inw(port);
else if (CHECK_SH7751_PCIIO(port))
return ctrl_inw(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
return ctrl_inw(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
......@@ -76,8 +53,8 @@ u32 titan_inl(unsigned long port)
{
if (PXSEG(port))
return ctrl_inl(port);
else if (CHECK_SH7751_PCIIO(port))
return ctrl_inl(PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
return ctrl_inl(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
......@@ -89,8 +66,8 @@ void titan_outb(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
}
......@@ -99,19 +76,19 @@ void titan_outb_p(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outb(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
delay();
ctrl_delay();
}
void titan_outw(u16 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outw(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outw(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outw(value, pci_ioaddr(port));
else if (port >= 0x2000)
ctrl_outw(value, port2adr(port));
else
......@@ -122,8 +99,8 @@ void titan_outl(u32 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outl(value, port);
else if (CHECK_SH7751_PCIIO(port))
ctrl_outl(value, PCI_IOMAP(port));
else if (is_pci_ioaddr(port))
ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
......@@ -140,10 +117,10 @@ void titan_outsl(unsigned long port, const void *src, unsigned long count)
void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
{
if (PXSEG(port) || CHECK_SH7751_PCIMEMIO(port))
if (PXSEG(port) || is_pci_memaddr(port))
return (void __iomem *)port;
else if (CHECK_SH7751_PCIIO(port))
return (void __iomem *)PCI_IOMAP(port);
else if (is_pci_ioaddr(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
arch/sh/cchips/hd6446x/hd64461/io.c
View file @ 959f85f8
......@@ -53,11 +53,6 @@ static __inline__ unsigned long PORT2ADDR(unsigned long port)
return 0xa0000000 + (port & 0x1fffffff);
}
static inline void delay(void)
{
ctrl_inw(0xa0000000);
}
unsigned char hd64461_inb(unsigned long port)
{
return *(volatile unsigned char*)PORT2ADDR(port);
......@@ -66,7 +61,7 @@ unsigned char hd64461_inb(unsigned long port)
unsigned char hd64461_inb_p(unsigned long port)
{
unsigned long v = *(volatile unsigned char*)PORT2ADDR(port);
delay();
ctrl_delay();
return v;
}
......@@ -88,7 +83,7 @@ void hd64461_outb(unsigned char b, unsigned long port)
void hd64461_outb_p(unsigned char b, unsigned long port)
{
*(volatile unsigned char*)PORT2ADDR(port) = b;
delay();
ctrl_delay();
}
void hd64461_outw(unsigned short b, unsigned long port)
......
arch/sh/drivers/pci/Makefile
View file @ 959f85f8
......@@ -6,8 +6,8 @@ obj-y += pci.o
obj-$(CONFIG_PCI_AUTO) += pci-auto.o
obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
dma-dreamcast.o
......@@ -17,3 +17,4 @@ obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o
obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o
obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o
obj-$(CONFIG_SH_TITAN) += ops-titan.o
obj-$(CONFIG_SH_LANDISK) += ops-landisk.o
arch/sh/drivers/pci/fixups-dreamcast.c
View file @ 959f85f8
......@@ -4,7 +4,7 @@
* PCI fixups for the Sega Dreamcast
*
* Copyright (C) 2001, 2002 M. R. Brown
* Copyright (C) 2002, 2003 Paul Mundt
* Copyright (C) 2002, 2003, 2006 Paul Mundt
*
* This file originally bore the message (with enclosed-$):
* Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
......@@ -45,36 +45,16 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev)
printk("PCI: Failed resource fixup\n");
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources);
void __init pcibios_fixup_bus(struct pci_bus *bus)
int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
/*
* We don't have any sub bus to fix up, and this is a rather
* stupid place to put general device fixups. Don't do it.
* Use the pcibios_fixups table or suffer the consequences.
/*
* The interrupt routing semantics here are quite trivial.
*
* We basically only support one interrupt, so we only bother
* updating a device's interrupt line with this single shared
* interrupt. Keeps routing quite simple, doesn't it?
*/
return GAPSPCI_IRQ;
}
void __init pcibios_fixup_irqs(void)
{
struct pci_dev *dev = 0;
for_each_pci_dev(dev) {
/*
* The interrupt routing semantics here are quite trivial.
*
* We basically only support one interrupt, so we only bother
* updating a device's interrupt line with this single shared
* interrupt. Keeps routing quite simple, doesn't it?
*/
printk(KERN_NOTICE "PCI: Fixing up IRQ routing for device %s\n",
pci_name(dev));
dev->irq = GAPSPCI_IRQ;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
}
}
arch/sh/drivers/pci/fixups-r7780rp.c
View file @ 959f85f8
......@@ -4,36 +4,42 @@
* Highlander R7780RP-1 PCI fixups
*
* Copyright (C) 2003 Lineo uSolutions, Inc.
* Copyright (C) 2004 Paul Mundt
* Copyright (C) 2004 - 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include "pci-sh7780.h"
#include <linux/pci.h>
#include "pci-sh4.h"
#include <asm/io.h>
int pci_fixup_pcic(void)
{
outl(0x000043ff, PCI_REG(SH7780_PCIIMR));
outl(0x0000380f, PCI_REG(SH7780_PCIAINTM));
pci_write_reg(0x000043ff, SH4_PCIINTM);
pci_write_reg(0x0000380f, SH4_PCIAINTM);
outl(0xfbb00047, PCI_REG(SH7780_PCICMD));
outl(0x00000000, PCI_REG(SH7780_PCIIBAR));
pci_write_reg(0xfbb00047, SH7780_PCICMD);
pci_write_reg(0x00000000, SH7780_PCIIBAR);
outl(0x00011912, PCI_REG(SH7780_PCISVID));
outl(0x08000000, PCI_REG(SH7780_PCICSCR0));
outl(0x0000001b, PCI_REG(SH7780_PCICSAR0));
outl(0xfd000000, PCI_REG(SH7780_PCICSCR1));
outl(0x0000000f, PCI_REG(SH7780_PCICSAR1));
pci_write_reg(0x00011912, SH7780_PCISVID);
pci_write_reg(0x08000000, SH7780_PCICSCR0);
pci_write_reg(0x0000001b, SH7780_PCICSAR0);
pci_write_reg(0xfd000000, SH7780_PCICSCR1);
pci_write_reg(0x0000000f, SH7780_PCICSAR1);
outl(0xfd000000, PCI_REG(SH7780_PCIMBR0));
outl(0x00fc0000, PCI_REG(SH7780_PCIMBMR0));
pci_write_reg(0xfd000000, SH7780_PCIMBR0);
pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
#ifdef CONFIG_32BIT
pci_write_reg(0xc0000000, SH7780_PCIMBR2);
pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
#endif
/* Set IOBR for windows containing area specified in pci.h */
outl((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1)), PCI_REG(SH7780_PCIIOBR));
outl(((SH7780_PCI_IO_SIZE-1) & (7<<18)), PCI_REG(SH7780_PCIIOBMR));
pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
SH7780_PCIIOBR);
pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR);
return 0;
}
arch/sh/drivers/pci/fixups-rts7751r2d.c
View file @ 959f85f8
......@@ -10,8 +10,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include "pci-sh7751.h"
#include <asm/io.h>
#include "pci-sh4.h"
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
......@@ -22,22 +21,23 @@ int pci_fixup_pcic(void)
bcr1 = inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
outl(bcr1, PCI_REG(SH7751_PCIBCR1));
pci_write_reg(bcr1, SH4_PCIBCR1);
/* Enable all interrupts, so we known what to fix */
outl(0x0000c3ff, PCI_REG(SH7751_PCIINTM));
outl(0x0000380f, PCI_REG(SH7751_PCIAINTM));
pci_write_reg(0x0000c3ff, SH4_PCIINTM);
pci_write_reg(0x0000380f, SH4_PCIAINTM);
outl(0xfb900047, PCI_REG(SH7751_PCICONF1));
outl(0xab000001, PCI_REG(SH7751_PCICONF4));
pci_write_reg(0xfb900047, SH7751_PCICONF1);
pci_write_reg(0xab000001, SH7751_PCICONF4);
mcr = inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
outl(mcr, PCI_REG(SH7751_PCIMCR));
pci_write_reg(mcr, SH4_PCIMCR);
pci_write_reg(0x0c000000, SH7751_PCICONF5);
pci_write_reg(0xd0000000, SH7751_PCICONF6);
pci_write_reg(0x0c000000, SH4_PCILAR0);
pci_write_reg(0x00000000, SH4_PCILAR1);
outl(0x0c000000, PCI_REG(SH7751_PCICONF5));
outl(0xd0000000, PCI_REG(SH7751_PCICONF6));
outl(0x0c000000, PCI_REG(SH7751_PCILAR0));
outl(0x00000000, PCI_REG(SH7751_PCILAR1));
return 0;
}
arch/sh/drivers/pci/fixups-sh03.c
View file @ 959f85f8
......@@ -3,11 +3,7 @@
#include <linux/types.h>
#include <linux/pci.h>
/*
* IRQ functions
*/
int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev)
int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
......@@ -17,8 +13,9 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev)
case 8: return 5; /* eth1 */
case 6: return 2; /* PCI bridge */
default:
printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
return 2;
printk(KERN_ERR "PCI: Bad IRQ mapping request "
"for slot %d\n", slot);
return 2;
}
} else {
switch (pin) {
......@@ -32,30 +29,3 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev)
}
return irq;
}
static u8 __init sh03_no_swizzle(struct pci_dev *dev, u8 *pin)
{
/* no swizzling */
return PCI_SLOT(dev->devfn);
}
static int sh03_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
irq = pcibios_map_platform_irq(slot, pin, dev);
if( irq < 0 ) {
pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
return irq;
}
pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
return irq;
}
void __init pcibios_fixup_irqs(void)
{
pci_fixup_irqs(sh03_no_swizzle, sh03_pci_lookup_irq);
}
arch/sh/drivers/pci/ops-bigsur.c
View file @ 959f85f8
......@@ -10,15 +10,12 @@
*
* PCI initialization for the Hitachi Big Sur Evaluation Board
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/io.h>
#include "pci-sh7751.h"
#include "pci-sh4.h"
#include <asm/bigsur/bigsur.h>
#define BIGSUR_PCI_IO 0x4000
......@@ -41,11 +38,11 @@ static struct resource sh7751_mem_resource = {
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ 0, }
};
static struct sh7751_pci_address_map sh7751_pci_map = {
static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS3_BASE_ADDR,
.size = BIGSUR_LSR0_SIZE,
......@@ -58,7 +55,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
};
/*
* Initialize the Big Sur PCI interface
* Initialize the Big Sur PCI interface
* Setup hardware to be Central Funtion
* Copy the BSR regs to the PCI interface
* Setup PCI windows into local RAM
......@@ -68,15 +65,15 @@ int __init pcibios_init_platform(void)
return sh7751_pcic_init(&sh7751_pci_map);
}
int pcibios_map_platform_irq(u8 slot, u8 pin)
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
/*
/*
* The Big Sur can be used in a CPCI chassis, but the SH7751 PCI
* interface is on the wrong end of the board so that it can also
* support a V320 CPI interface chip... Therefor the IRQ mapping is
* somewhat use dependent... I'l assume a linear map for now, i.e.
* INTA=slot0,pin0... INTD=slot3,pin0...
*/
*/
int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE;
PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n",
......@@ -84,4 +81,3 @@ int pcibios_map_platform_irq(u8 slot, u8 pin)
return irq;
}
arch/sh/drivers/pci/ops-landisk.c 0 → 100644
View file @ 959f85f8
/*
* arch/sh/drivers/pci/ops-landisk.c
*
* PCI initialization for the I-O DATA Device, Inc. LANDISK board
*
* Copyright (C) 2006 kogiidena
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include "pci-sh4.h"
static struct resource sh7751_io_resource = {
.name = "SH7751 IO",
.start = 0x4000,
.end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource sh7751_mem_resource = {
.name = "SH7751 mem",
.start = SH7751_PCI_MEMORY_BASE,
.end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
struct pci_channel board_pci_channels[] = {
{&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff},
{NULL, NULL, NULL, 0, 0},
};
static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS3_BASE_ADDR,
.size = (64 << 20), /* 64MB */
},
.flags = SH4_PCIC_NO_RESET,
};
int __init pcibios_init_platform(void)
{
return sh7751_pcic_init(&sh7751_pci_map);
}
int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
/*
* slot0: pin1-4 = irq5,6,7,8
* slot1: pin1-4 = irq6,7,8,5
* slot2: pin1-4 = irq7,8,5,6
* slot3: pin1-4 = irq8,5,6,7
*/
int irq = ((slot + pin - 1) & 0x3) + 5;
if ((slot | (pin - 1)) > 0x3) {
printk("PCI: Bad IRQ mapping request for slot %d pin %c\n",
slot, pin - 1 + 'A');
return -1;
}
return irq;
}
arch/sh/drivers/pci/ops-r7780rp.c
View file @ 959f85f8
......@@ -15,13 +15,11 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <asm/io.h>
#include "pci-sh7780.h"
#include <asm/r7780rp/r7780rp.h>
#include <asm/io.h>
#include "pci-sh4.h"
int __init pcibios_map_platform_irq(u8 slot, u8 pin)
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
switch (slot) {
case 0: return IRQ_PCISLOT1; /* PCI Interrupt #1 */
......@@ -29,7 +27,8 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin)
case 2: return IRQ_PCISLOT3; /* PCI Interrupt #3 */
case 3: return IRQ_PCISLOT4; /* PCI Interrupt E4 */
default:
printk("PCI: Bad IRQ mapping request for slot %d, func %d\n", slot, pin-1);
printk(KERN_ERR "PCI: Bad IRQ mapping "
"request for slot %d, func %d\n", slot, pin-1);
return -1;
}
}
......@@ -51,12 +50,12 @@ static struct resource sh7780_mem_resource = {
extern struct pci_ops sh7780_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7780_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
{ &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
{ NULL, NULL, NULL, 0, 0 },
};
EXPORT_SYMBOL(board_pci_channels);
static struct sh7780_pci_address_map sh7780_pci_map = {
static struct sh4_pci_address_map sh7780_pci_map = {
.window0 = {
.base = SH7780_CS2_BASE_ADDR,
.size = 0x04000000,
......@@ -67,11 +66,10 @@ static struct sh7780_pci_address_map sh7780_pci_map = {
.size = 0x04000000,
},
.flags = SH7780_PCIC_NO_RESET,
.flags = SH4_PCIC_NO_RESET,
};
int __init pcibios_init_platform(void)
{
return sh7780_pcic_init(&sh7780_pci_map);
}
arch/sh/drivers/pci/ops-rts7751r2d.c
View file @ 959f85f8
......@@ -17,12 +17,11 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <asm/io.h>
#include "pci-sh7751.h"
#include <asm/rts7751r2d/rts7751r2d.h>
#include <asm/io.h>
#include "pci-sh4.h"
int __init pcibios_map_platform_irq(u8 slot, u8 pin)
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
switch (slot) {
case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */
......@@ -52,12 +51,12 @@ static struct resource sh7751_mem_resource = {
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ NULL, NULL, NULL, 0, 0 },
};
EXPORT_SYMBOL(board_pci_channels);
static struct sh7751_pci_address_map sh7751_pci_map = {
static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS3_BASE_ADDR,
.size = 0x04000000,
......@@ -68,7 +67,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
.size = 0x00000000, /* Unused */
},
.flags = SH7751_PCIC_NO_RESET,
.flags = SH4_PCIC_NO_RESET,
};
int __init pcibios_init_platform(void)
......
arch/sh/drivers/pci/ops-sh4.c 0 → 100644
View file @ 959f85f8
/*
* Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
*
* Copyright (C) 2002 - 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License v2. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/pci.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include "pci-sh4.h"
/*
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) \
P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3))
static DEFINE_SPINLOCK(sh4_pci_lock);
/*
* Functions for accessing PCI configuration space with type 1 accesses
*/
static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
unsigned long flags;
u32 data;
/*
* PCIPDR may only be accessed as 32 bit words,
* so we must do byte alignment by hand
*/
spin_lock_irqsave(&sh4_pci_lock, flags);
pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
data = pci_read_reg(SH4_PCIPDR);
spin_unlock_irqrestore(&sh4_pci_lock, flags);
switch (size) {
case 1:
*val = (data >> ((where & 3) << 3)) & 0xff;
break;
case 2:
*val = (data >> ((where & 2) << 3)) & 0xffff;
break;
case 4:
*val = data;
break;
default:
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
return PCIBIOS_SUCCESSFUL;
}
/*
* Since SH4 only does 32bit access we'll have to do a read,
* mask,write operation.
* We'll allow an odd byte offset, though it should be illegal.
*/
static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
unsigned long flags;
int shift;
u32 data;
spin_lock_irqsave(&sh4_pci_lock, flags);
pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
data = pci_read_reg(SH4_PCIPDR);
spin_unlock_irqrestore(&sh4_pci_lock, flags);
switch (size) {
case 1:
shift = (where & 3) << 3;
data &= ~(0xff << shift);
data |= ((val & 0xff) << shift);
break;
case 2:
shift = (where & 2) << 3;
data &= ~(0xffff << shift);
data |= ((val & 0xffff) << shift);
break;
case 4:
data = val;
break;
default:
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
pci_write_reg(data, SH4_PCIPDR);
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops sh4_pci_ops = {
.read = sh4_pci_read,
.write = sh4_pci_write,
};
/*
* Not really related to pci_ops, but it's common and not worth shoving
* somewhere else for now..
*/
static unsigned int pci_probe = PCI_PROBE_CONF1;
int __init sh4_pci_check_direct(void)
{
/*
* Check if configuration works.
*/
if (pci_probe & PCI_PROBE_CONF1) {
unsigned int tmp = pci_read_reg(SH4_PCIPAR);
pci_write_reg(P1SEG, SH4_PCIPAR);
if (pci_read_reg(SH4_PCIPAR) == P1SEG) {
pci_write_reg(tmp, SH4_PCIPAR);
printk(KERN_INFO "PCI: Using configuration type 1\n");
request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
return 0;
}
pci_write_reg(tmp, SH4_PCIPAR);
}
pr_debug("PCI: pci_check_direct failed\n");
return -EINVAL;
}
/* Handle generic fixups */
static void __init pci_fixup_ide_bases(struct pci_dev *d)
{
int i;
/*
* PCI IDE controllers use non-standard I/O port decoding, respect it.
*/
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
return;
pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
for(i = 0; i < 4; i++) {
struct resource *r = &d->resource[i];
if ((r->start & ~0x80) == 0x374) {
r->start |= 2;
r->end = r->start;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
pci_probe = 0;
return NULL;
}
return str;
}
arch/sh/drivers/pci/ops-snapgear.c
View file @ 959f85f8
......@@ -2,7 +2,7 @@
* arch/sh/drivers/pci/ops-snapgear.c
*
* Author: David McCullough <davidm@snapgear.com>
*
*
* Ported to new API by Paul Mundt <lethal@linux-sh.org>
*
* Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
......@@ -12,15 +12,11 @@
*
* PCI initialization for the SnapGear boards
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/io.h>
#include "pci-sh7751.h"
#include "pci-sh4.h"
#define SNAPGEAR_PCI_IO 0x4000
#define SNAPGEAR_PCI_MEM 0xfd000000
......@@ -43,14 +39,12 @@ static struct resource sh7751_mem_resource = {
.flags = IORESOURCE_MEM,
};
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ 0, }
};
static struct sh7751_pci_address_map sh7751_pci_map = {
static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS2_BASE_ADDR,
.size = SNAPGEAR_LSR0_SIZE,
......@@ -61,11 +55,11 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
.size = SNAPGEAR_LSR1_SIZE,
},
.flags = SH7751_PCIC_NO_RESET,
.flags = SH4_PCIC_NO_RESET,
};
/*
* Initialize the SnapGear PCI interface
* Initialize the SnapGear PCI interface
* Setup hardware to be Central Funtion
* Copy the BSR regs to the PCI interface
* Setup PCI windows into local RAM
......@@ -75,7 +69,7 @@ int __init pcibios_init_platform(void)
return sh7751_pcic_init(&sh7751_pci_map);
}
int __init pcibios_map_platform_irq(u8 slot, u8 pin)
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
int irq = -1;
......@@ -98,4 +92,3 @@ void __init pcibios_fixup(void)
{
/* Nothing to fixup .. */
}
arch/sh/drivers/pci/ops-titan.c
View file @ 959f85f8
......@@ -16,12 +16,11 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/titan.h>
#include "pci-sh7751.h"
#include "pci-sh4.h"
int __init pcibios_map_platform_irq(u8 slot, u8 pin)
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
int irq = -1;
......@@ -32,7 +31,8 @@ int __init pcibios_map_platform_irq(u8 slot, u8 pin)
case 3: irq = TITAN_IRQ_MPCIB; break; /* mPCI B */
case 4: irq = TITAN_IRQ_USB; break; /* USB */
default:
printk(KERN_INFO "PCI: Bad IRQ mapping request for slot %d\n", slot);
printk(KERN_INFO "PCI: Bad IRQ mapping "
"request for slot %d\n", slot);
return -1;
}
......@@ -56,15 +56,13 @@ static struct resource sh7751_mem_resource = {
.flags = IORESOURCE_MEM
};
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ NULL, NULL, NULL, 0, 0 },
};
EXPORT_SYMBOL(board_pci_channels);
static struct sh7751_pci_address_map sh7751_pci_map = {
static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS2_BASE_ADDR,
.size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */
......@@ -75,7 +73,7 @@ static struct sh7751_pci_address_map sh7751_pci_map = {
.size = SH7751_MEM_REGION_SIZE*2,
},
.flags = SH7751_PCIC_NO_RESET,
.flags = SH4_PCIC_NO_RESET,
};
int __init pcibios_init_platform(void)
......
arch/sh/drivers/pci/pci-auto.c
View file @ 959f85f8
......@@ -358,7 +358,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
{
u32 temp;
#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) && !defined(CONFIG_SH_R7780RP)
/*
* [jsun] we always bump up baselines a little, so that if there
* nothing behind P2P bridge, we don't wind up overlapping IO/MEM
......@@ -366,7 +365,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
*/
pciauto_lower_memspc += 1;
pciauto_lower_iospc += 1;
#endif
/*
* Configure subordinate bus number. The PCI subsystem
......@@ -392,11 +390,6 @@ pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
* configured by this routine to happily live behind a
* P2P bridge in a system.
*/
#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) || defined(CONFIG_SH_R7780RP)
pciauto_lower_memspc += 0x00400000;
pciauto_lower_iospc += 0x00004000;
#endif
/* Align memory and I/O to 4KB and 4 byte boundaries. */
pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
& ~(0x1000 - 1);
......@@ -467,9 +460,6 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
DBG(" Bridge: primary=%.2x, secondary=%.2x\n",
current_bus, sub_bus + 1);
#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D) || defined(CONFIG_SH_R7780RP)
pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_1);
#endif
pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
pci_devfn, sub_bus);
DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
......
arch/sh/drivers/pci/pci-sh4.h 0 → 100644
View file @ 959f85f8
#ifndef __PCI_SH4_H
#define __PCI_SH4_H
#ifdef CONFIG_CPU_SUBTYPE_SH7780
#include "pci-sh7780.h"
#else
#include "pci-sh7751.h"
#endif
#include <asm/io.h>
/* startup values */
#define PCI_PROBE_BIOS 1
#define PCI_PROBE_CONF1 2
#define PCI_PROBE_CONF2 4
#define PCI_NO_SORT 0x100
#define PCI_BIOS_SORT 0x200
#define PCI_NO_CHECKS 0x400
#define PCI_ASSIGN_ROMS 0x1000
#define PCI_BIOS_IRQ_SCAN 0x2000
#define SH4_PCICR 0x100 /* PCI Control Register */
#define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
#define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */
#define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */
#define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */
#define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
#define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
#define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */
#define SH4_PCICR_SERR 0x00000008 /* SERR output assert */
#define SH4_PCICR_INTA 0x00000004 /* INTA output assert */
#define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */
#define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */
#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */
#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */
#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */
#define SH4_PCIINT 0x114 /* PCI Interrupt Register */
#define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */
#define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */
#define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */
#define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
#define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */
#define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */
#define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
#define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */
#define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
#define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
#define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
#define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
#define SH4_PCIALR 0x11C /* Error Address Register */
#define SH4_PCICLR 0x120 /* Error Command/Data */
#define SH4_PCICLR_MPIO 0x80000000
#define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
#define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
#define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
#define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
#define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */
#define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
#define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
#define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
#define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
#define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
#define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
#define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
#define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */
#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */
#define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
#define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
#define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
#define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
#define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
#define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */
#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */
#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */
#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */
#define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
#define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
#define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
#define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
#define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */
#define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
#define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
#define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
#define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
#define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */
#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */
#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */
#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */
#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */
#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */
#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */
#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */
#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */
#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */
#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */
#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */
#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */
#define SH4_PCIPAR 0x1C0 /* PIO Address Register */
#define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
#define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
#define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
#define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */
#define SH4_PCIMBR 0x1C4 /* Memory Base Address */
#define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
#define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */
#define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
#define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
#define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
#define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */
#define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
#define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */
/* For definitions of BCR, MCR see ... */
#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */
#define SH4_PCIMBR0 SH4_PCIBCR1
#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */
#define SH4_PCIMBMR0 SH4_PCIBCR2
#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */
#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */
#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */
#define SH4_PCIMBR2 SH4_PCIWCR3
#define SH4_PCIMCR 0x1F4 /* Memory Control Register */
#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */
#define SH4_PCIPCTR 0x200 /* Port Control Register */
#define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
#define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
#define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
#define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
#define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
#define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
#define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
#define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
#define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
#define SH4_PCIPDTR 0x204 /* Port Data Register */
#define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
#define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
#define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
#define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
#define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
#define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
#define SH4_PCIPDR 0x220 /* Port IO Data Register */
/* Flags */
#define SH4_PCIC_NO_RESET 0x0001
/* arch/sh/kernel/drivers/pci/ops-sh4.c */
extern struct pci_ops sh4_pci_ops;
int sh4_pci_check_direct(void);
int pci_fixup_pcic(void);
struct sh4_pci_address_space {
unsigned long base;
unsigned long size;
};
struct sh4_pci_address_map {
struct sh4_pci_address_space window0;
struct sh4_pci_address_space window1;
unsigned long flags;
};
static inline void pci_write_reg(unsigned long val, unsigned long reg)
{
outl(val, PCI_REG(reg));
}
static inline unsigned long pci_read_reg(unsigned long reg)
{
return inl(PCI_REG(reg));
}
#endif /* __PCI_SH4_H */
arch/sh/drivers/pci/pci-sh7751.c
View file @ 959f85f8
This diff is collapsed.
arch/sh/drivers/pci/pci-sh7751.h
View file @ 959f85f8
This diff is collapsed.
arch/sh/drivers/pci/pci-sh7780.c
View file @ 959f85f8
......@@ -20,197 +20,36 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include "pci-sh7780.h"
static unsigned int pci_probe = PCI_PROBE_CONF1;
extern int pci_fixup_pcic(void);
/*
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
/*
* Functions for accessing PCI configuration space with type 1 accesses
*/
static int sh7780_pci_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
unsigned long flags;
u32 data;
/*
* PCIPDR may only be accessed as 32 bit words,
* so we must do byte alignment by hand
*/
local_irq_save(flags);
outl(CONFIG_CMD(bus, devfn, where), PCI_REG(SH7780_PCIPAR));
data = inl(PCI_REG(SH7780_PCIPDR));
local_irq_restore(flags);
switch (size) {
case 1:
*val = (data >> ((where & 3) << 3)) & 0xff;
break;
case 2:
*val = (data >> ((where & 2) << 3)) & 0xffff;
break;
case 4:
*val = data;
break;
default:
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
return PCIBIOS_SUCCESSFUL;
}
#include "pci-sh4.h"
/*
* Since SH7780 only does 32bit access we'll have to do a read,
* mask,write operation.
* We'll allow an odd byte offset, though it should be illegal.
* Initialization. Try all known PCI access methods. Note that we support
* using both PCI BIOS and direct access: in such cases, we use I/O ports
* to access config space.
*
* Note that the platform specific initialization (BSC registers, and memory
* space mapping) will be called via the platform defined function
* pcibios_init_platform().
*/
static int sh7780_pci_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
static int __init sh7780_pci_init(void)
{
unsigned long flags;
int shift;
u32 data;
local_irq_save(flags);
outl(CONFIG_CMD(bus, devfn, where), PCI_REG(SH7780_PCIPAR));
data = inl(PCI_REG(SH7780_PCIPDR));
local_irq_restore(flags);
switch (size) {
case 1:
shift = (where & 3) << 3;
data &= ~(0xff << shift);
data |= ((val & 0xff) << shift);
break;
case 2:
shift = (where & 2) << 3;
data &= ~(0xffff << shift);
data |= ((val & 0xffff) << shift);
break;
case 4:
data = val;
break;
default:
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
outl(data, PCI_REG(SH7780_PCIPDR));
return PCIBIOS_SUCCESSFUL;
}
#undef CONFIG_CMD
struct pci_ops sh7780_pci_ops = {
.read = sh7780_pci_read,
.write = sh7780_pci_write,
};
unsigned int id;
int ret;
static int __init pci_check_direct(void)
{
unsigned int tmp, id;
pr_debug("PCI: Starting intialization.\n");
outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
/* check for SH7780/SH7780R hardware */
id = inl(PCI_REG(SH7780_PCIVID));
id = pci_read_reg(SH7780_PCIVID);
if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
(id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
return -ENODEV;
}
/*
* Check if configuration works.
*/
if (pci_probe & PCI_PROBE_CONF1) {
tmp = inl(PCI_REG(SH7780_PCIPAR));
outl(0x80000000, PCI_REG(SH7780_PCIPAR));
if (inl(PCI_REG(SH7780_PCIPAR)) == 0x80000000) {
outl(tmp, PCI_REG(SH7780_PCIPAR));
printk(KERN_INFO "PCI: Using configuration type 1\n");
request_region(PCI_REG(SH7780_PCIPAR), 8, "PCI conf1");
return 0;
}
outl(tmp, PCI_REG(SH7780_PCIPAR));
}
pr_debug("PCI: pci_check_direct failed\n");
return -EINVAL;
}
/***************************************************************************************/
/*
* Handle bus scanning and fixups ....
*/
static void __init pci_fixup_ide_bases(struct pci_dev *d)
{
int i;
/*
* PCI IDE controllers use non-standard I/O port decoding, respect it.
*/
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
return;
pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
for(i=0; i<4; i++) {
struct resource *r = &d->resource[i];
if ((r->start & ~0x80) == 0x374) {
r->start |= 2;
r->end = r->start;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
/*
* Called after each bus is probed, but before its children
* are examined.
*/
void __init pcibios_fixup_bus(struct pci_bus *b)
{
pci_read_bridge_bases(b);
}
/*
* Initialization. Try all known PCI access methods. Note that we support
* using both PCI BIOS and direct access: in such cases, we use I/O ports
* to access config space.
*
* Note that the platform specific initialization (BSC registers, and memory
* space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it
* exists and via the platform defined function pcibios_init_platform().
* See pci_bigsur.c for implementation;
*
* The BIOS version of the pci functions is not yet implemented but it is left
* in for completeness. Currently an error will be genereated at compile time.
*/
static int __init sh7780_pci_init(void)
{
int ret;
pr_debug("PCI: Starting intialization.\n");
/* Setup the INTC */
ctrl_outl(0x00200000, INTC_ICR0); /* INTC SH-4 Mode */
ctrl_outl(0x00078000, INTC_INT2MSKCR); /* enable PCIINTA - PCIINTD */
......@@ -219,15 +58,14 @@ static int __init sh7780_pci_init(void)
ctrl_outl(0x80000000, INTC_INTMSKCLR1); /* enable IRL0-3 Interrupt */
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); /* enable IRL0-3 Interrupt */
if ((ret = pci_check_direct()) != 0)
if ((ret = sh4_pci_check_direct()) != 0)
return ret;
return pcibios_init_platform();
}
core_initcall(sh7780_pci_init);
int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
{
u32 word;
......@@ -236,25 +74,25 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
* bootloader and doing it here means the MAC addresses loaded
* by the bootloader get lost.
*/
if (!(map->flags & SH7780_PCIC_NO_RESET)) {
if (!(map->flags & SH4_PCIC_NO_RESET)) {
/* toggle PCI reset pin */
word = SH7780_PCICR_PREFIX | SH7780_PCICR_PRST;
outl(word,PCI_REG(SH7780_PCICR));
word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
pci_write_reg(word, SH4_PCICR);
/* Wait for a long time... not 1 sec. but long enough */
mdelay(100);
word = SH7780_PCICR_PREFIX;
outl(word,PCI_REG(SH7780_PCICR));
word = SH4_PCICR_PREFIX;
pci_write_reg(word, SH4_PCICR);
}
/* set the command/status bits to:
* Wait Cycle Control + Parity Enable + Bus Master +
* Mem space enable
*/
outl(0x00000046, PCI_REG(SH7780_PCICMD));
pci_write_reg(0x00000046, SH7780_PCICMD);
/* define this host as the host bridge */
word = SH7780_PCI_HOST_BRIDGE << 24;
outl(word, PCI_REG(SH7780_PCIRID));
word = PCI_BASE_CLASS_BRIDGE << 24;
pci_write_reg(word, SH7780_PCIRID);
/* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
......@@ -262,25 +100,26 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
* Window1 = map->window1.size @ cached area base = SDRAM
*/
word = ((map->window0.size - 1) & 0x1ff00001) | 0x01;
outl(0x07f00001, PCI_REG(SH7780_PCILSR0));
pci_write_reg(0x07f00001, SH4_PCILSR0);
word = ((map->window1.size - 1) & 0x1ff00001) | 0x01;
outl(0x00000001, PCI_REG(SH7780_PCILSR1));
pci_write_reg(0x00000001, SH4_PCILSR1);
/* Set the values on window 0 PCI config registers */
word = P2SEGADDR(map->window0.base);
outl(0xa8000000, PCI_REG(SH7780_PCILAR0));
outl(0x08000000, PCI_REG(SH7780_PCIMBAR0));
pci_write_reg(0xa8000000, SH4_PCILAR0);
pci_write_reg(0x08000000, SH7780_PCIMBAR0);
/* Set the values on window 1 PCI config registers */
word = P2SEGADDR(map->window1.base);
outl(0x00000000, PCI_REG(SH7780_PCILAR1));
outl(0x00000000, PCI_REG(SH7780_PCIMBAR1));
pci_write_reg(0x00000000, SH4_PCILAR1);
pci_write_reg(0x00000000, SH7780_PCIMBAR1);
/* Map IO space into PCI IO window
* The IO window is 64K-PCIBIOS_MIN_IO in size
* IO addresses will be translated to the
* PCI IO window base address
*/
PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO,
(64*1024), SH7780_PCI_IO_BASE+PCIBIOS_MIN_IO);
pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
PCIBIOS_MIN_IO, (64 << 10),
SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
/* NOTE: I'm ignoring the PCI error IRQs for now..
* TODO: add support for the internal error interrupts and
......@@ -293,49 +132,8 @@ int __init sh7780_pcic_init(struct sh7780_pci_address_map *map)
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | /* SH7780_PCICR_ARBM |*/ SH7780_PCICR_FTO;
outl(word, PCI_REG(SH7780_PCICR));
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
pci_write_reg(word, SH4_PCICR);
return 1;
}
char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
pci_probe = 0;
return NULL;
}
return str;
}
/*
* IRQ functions
*/
static u8 __init sh7780_no_swizzle(struct pci_dev *dev, u8 *pin)
{
/* no swizzling */
return PCI_SLOT(dev->devfn);
}
static int sh7780_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
irq = pcibios_map_platform_irq(slot,pin);
if( irq < 0 ) {
pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
return irq;
}
pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
return irq;
}
void __init pcibios_fixup_irqs(void)
{
pci_fixup_irqs(sh7780_no_swizzle, sh7780_pci_lookup_irq);
}
arch/sh/drivers/pci/pci-sh7780.h
View file @ 959f85f8
......@@ -12,28 +12,6 @@
#ifndef _PCI_SH7780_H_
#define _PCI_SH7780_H_
#include <linux/pci.h>
/* set debug level 4=verbose...1=terse */
//#define DEBUG_PCI 3
#undef DEBUG_PCI
#ifdef DEBUG_PCI
#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
#else
#define PCIDBG(n, x...)
#endif
/* startup values */
#define PCI_PROBE_BIOS 1
#define PCI_PROBE_CONF1 2
#define PCI_PROBE_CONF2 4
#define PCI_NO_SORT 0x100
#define PCI_BIOS_SORT 0x200
#define PCI_NO_CHECKS 0x400
#define PCI_ASSIGN_ROMS 0x1000
#define PCI_BIOS_IRQ_SCAN 0x2000
/* Platform Specific Values */
#define SH7780_VENDOR_ID 0x1912
#define SH7780_DEVICE_ID 0x0002
......@@ -47,15 +25,12 @@
/* SH7780 Specific Values */
#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */
#define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
#define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
#if 1
#define SH7780_PCI_IO_BASE 0xFE400000 /* IO space base address */
#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
#else
#define SH7780_PCI_IO_BASE 0xFE200000 /* IO space base address */
#define SH7780_PCI_IO_SIZE 0x00200000 /* Size of IO window */
#endif
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
#define PCI_REG(n) (SH7780_PCIREG_BASE+n)
......@@ -90,44 +65,16 @@
#define SH7780_PCIPMCSR_BSE 0x046
#define SH7780_PCICDD 0x047
/* SH7780 PCI Local Registers */
#define SH7780_PCICR 0x100 /* PCI Control Register */
#define SH7780_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
#define SH7780_PCICR_PFCS 0x00000800 /* TRDY/IRDY Enable */
#define SH7780_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */
#define SH7780_PCICR_PFE 0x00000200 /* Target Read Single */
#define SH7780_PCICR_TBS 0x00000100 /* Target Byte Swap */
#define SH7780_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
#define SH7780_PCICR_IOCS 0x00000004 /* INTA output assert */
#define SH7780_PCICR_PRST 0x00000002 /* PCI Reset Assert */
#define SH7780_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
#define SH7780_PCILSR0 0x104 /* PCI Local Space Register0 */
#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */
#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */
#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */
#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
#define SH7780_PCIAIR 0x11C /* Error Address Register */
#define SH7780_PCICIR 0x120 /* Error Command/Data Register */
#define SH7780_PCIAINT 0x130 /* Arbiter Interrupt Register */
#define SH7780_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
#define SH7780_PCIBMIR 0x138 /* Error Bus Master Register */
#define SH7780_PCIPAR 0x1C0 /* PIO Address Register */
#define SH7780_PCIPINT 0x1CC /* Power Management Int. Register */
#define SH7780_PCIPINTM 0x1D0 /* Power Management Mask Register */
#define SH7780_PCIMBR0 0x1E0 /* Memory Bank0 Register */
#define SH7780_PCIMBMR0 0x1E4 /* Memory Bank0 Mask Register */
#define SH7780_PCIMBR1 0x1E8 /* Memory Bank1 Register */
#define SH7780_PCIMBMR1 0x1EC /* Memory Bank1 Mask Register */
#define SH7780_PCIMBR2 0x1F0 /* Memory Bank2 Register */
#define SH7780_PCIMBMR2 0x1F4 /* Memory Bank2 Mask Register */
#define SH7780_PCIIOBR 0x1F8 /* Bank Register */
#define SH7780_PCIIOBMR 0x1FC /* Bank Mask Register */
#define SH7780_PCIMBR0 0x1E0
#define SH7780_PCIMBMR0 0x1E4
#define SH7780_PCIMBR2 0x1F0
#define SH7780_PCIMBMR2 0x1F4
#define SH7780_PCIIOBR 0x1F8
#define SH7780_PCIIOBMR 0x1FC
#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */
#define SH7780_PCICSCR1 0x214 /* Cache Snoop2 Cnt. Register */
#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
#define SH7780_PCIPDR 0x220 /* Port IO Data Register */
/* General Memory Config Addresses */
#define SH7780_CS0_BASE_ADDR 0x0
......@@ -139,30 +86,9 @@
#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
/* General PCI values */
#define SH7780_PCI_HOST_BRIDGE 0x6
/* Flags */
#define SH7780_PCIC_NO_RESET 0x0001
/* External functions defined per platform i.e. Big Sur, SE... (these could be routed
* through the machine vectors... */
extern int pcibios_init_platform(void);
extern int pcibios_map_platform_irq(u8 slot, u8 pin);
struct sh7780_pci_address_space {
unsigned long base;
unsigned long size;
};
struct sh7780_pci_address_map {
struct sh7780_pci_address_space window0;
struct sh7780_pci_address_space window1;
unsigned long flags;
};
struct sh4_pci_address_map;
/* arch/sh/drivers/pci/pci-sh7780.c */
extern int sh7780_pcic_init(struct sh7780_pci_address_map *map);
int sh7780_pcic_init(struct sh4_pci_address_map *map);
#endif /* _PCI_SH7780_H_ */
arch/sh/drivers/pci/pci-st40.c
View file @ 959f85f8
......@@ -70,12 +70,6 @@
static void pci_set_rbar_region(unsigned int region, unsigned long localAddr,
unsigned long pciOffset, unsigned long regionSize);
/*
* The pcibios_map_platform_irq function is defined in the appropriate
* board specific code and referenced here
*/
extern int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
static __init void SetPCIPLL(void)
{
{
......@@ -422,13 +416,6 @@ struct pci_ops st40pci_config_ops = {
/* Everything hangs off this */
static struct pci_bus *pci_root_bus;
static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
{
return PCI_SLOT(dev->devfn);
}
static int __init pcibios_init(void)
{
extern unsigned long memory_start, memory_end;
......@@ -465,17 +452,11 @@ static int __init pcibios_init(void)
/* ok, do the scan man */
pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL);
pci_assign_unassigned_resources();
pci_fixup_irqs(no_swizzle, pcibios_map_platform_irq);
return 0;
}
subsys_initcall(pcibios_init);
void __init pcibios_fixup_bus(struct pci_bus *bus)
{
}
/*
* Publish a region of local address space over the PCI bus
* to other devices.
......
arch/sh/drivers/pci/pci.c
View file @ 959f85f8
......@@ -21,6 +21,26 @@
#include <linux/init.h>
#include <asm/io.h>
static inline u8 bridge_swizzle(u8 pin, u8 slot)
{
return (((pin - 1) + slot) % 4) + 1;
}
static u8 __init simple_swizzle(struct pci_dev *dev, u8 *pinp)
{
u8 pin = *pinp;
while (dev->bus->parent) {
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
/* Move up the chain of bridges. */
dev = dev->bus->self;
}
*pinp = pin;
/* The slot is the slot of the last bridge. */
return PCI_SLOT(dev->devfn);
}
static int __init pcibios_init(void)
{
struct pci_channel *p;
......@@ -36,19 +56,26 @@ static int __init pcibios_init(void)
/* scan the buses */
busno = 0;
for (p= board_pci_channels; p->pci_ops != NULL; p++) {
for (p = board_pci_channels; p->pci_ops != NULL; p++) {
bus = pci_scan_bus(busno, p->pci_ops, p);
busno = bus->subordinate+1;
busno = bus->subordinate + 1;
}
/* board-specific fixups */
pcibios_fixup_irqs();
pci_fixup_irqs(simple_swizzle, pcibios_map_platform_irq);
return 0;
}
subsys_initcall(pcibios_init);
/*
* Called after each bus is probed, but before its children
* are examined.
*/
void __init pcibios_fixup_bus(struct pci_bus *bus)
{
pci_read_bridge_bases(bus);
}
void
pcibios_update_resource(struct pci_dev *dev, struct resource *root,
struct resource *res, int resource)
......@@ -192,11 +219,10 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
return NULL;
}
EXPORT_SYMBOL(pci_iomap);
void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{
iounmap(addr);
}
EXPORT_SYMBOL(pci_iomap);
EXPORT_SYMBOL(pci_iounmap);
arch/sh/kernel/cpu/sh4/Makefile
View file @ 959f85f8
......@@ -7,6 +7,9 @@ obj-y := ex.o probe.o
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH4) := clock-sh4.o
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
......
arch/sh/kernel/cpu/sh4/setup-sh7780.c 0 → 100644
View file @ 959f85f8
/*
* SH7780 Setup
*
* Copyright (C) 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/sci.h>
static struct resource rtc_resources[] = {
[0] = {
.start = 0xffe80000,
.end = 0xffe80000 + 0x58 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = 21,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = 22,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = 23,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 40, 41, 43, 42 },
}, {
.mapbase = 0xffe10000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 76, 77, 79, 78 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *sh7780_devices[] __initdata = {
&rtc_device,
&sci_device,
};
static int __init sh7780_devices_setup(void)
{
return platform_add_devices(sh7780_devices,
ARRAY_SIZE(sh7780_devices));
}
__initcall(sh7780_devices_setup);
include/asm-sh/io.h
View file @ 959f85f8
......@@ -209,6 +209,11 @@ static inline void ctrl_outl(unsigned int b, unsigned long addr)
*(volatile unsigned long*)addr = b;
}
static inline void ctrl_delay(void)
{
ctrl_inw(P2SEG);
}
#define IO_SPACE_LIMIT 0xffffffff
/*
......
include/asm-sh/pci.h
View file @ 959f85f8
......@@ -32,6 +32,34 @@ extern struct pci_channel board_pci_channels[];
#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start
#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start
/*
* I/O routine helpers
*/
#ifdef CONFIG_CPU_SUBTYPE_SH7780
#define PCI_IO_AREA 0xFE400000
#define PCI_IO_SIZE 0x00400000
#else
#define PCI_IO_AREA 0xFE240000
#define PCI_IO_SIZE 0X00040000
#endif
#define PCI_MEM_SIZE 0x01000000
#define SH4_PCIIOBR_MASK 0xFFFC0000
#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
#if defined(CONFIG_PCI)
#define is_pci_ioaddr(port) \
(((port) >= PCIBIOS_MIN_IO) && \
((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
#define is_pci_memaddr(port) \
(((port) >= PCIBIOS_MIN_MEM) && \
((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
#else
#define is_pci_ioaddr(port) (0)
#define is_pci_memaddr(port) (0)
#endif
struct pci_dev;
extern void pcibios_set_master(struct pci_dev *dev);
......@@ -98,11 +126,12 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
#endif
/* Board-specific fixup routines. */
extern void pcibios_fixup(void);
extern void pcibios_fixup_irqs(void);
void pcibios_fixup(void);
int pcibios_init_platform(void);
int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
#ifdef CONFIG_PCI_AUTO
extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
int pciauto_assign_resources(int busno, struct pci_channel *hose);
#endif
static inline void pcibios_add_platform_entries(struct pci_dev *dev)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7