Skip to content

L
linux
Commit 961d4c38 authored by Michal Kazior's avatar Michal Kazior Committed by Kalle Valo
Browse files
Options

ath10k: add support for HTT 3.0 

New firmware comes with new HTT protocol version.
In 3.0 the separate mgmt tx command has been
removed. All traffic is to be pushed through data
tx (tx_frm) command with a twist - FW seems to not
be able (yet?) to access tx fragment table so for
manamgement frames frame pointer is passed
directly.
Signed-off-by: default avatarMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent 0d9b0438
Hide whitespace changes
Inline Side-by-side
Showing with 76 additions and 39 deletions
drivers/net/wireless/ath/ath10k/htt.c
View file @ 961d4c38
......@@ -104,21 +104,16 @@ int ath10k_htt_attach(struct ath10k *ar)
static int ath10k_htt_verify_version(struct ath10k_htt *htt)
{
ath10k_dbg(ATH10K_DBG_HTT,
"htt target version %d.%d; host version %d.%d\n",
htt->target_version_major,
htt->target_version_minor,
HTT_CURRENT_VERSION_MAJOR,
HTT_CURRENT_VERSION_MINOR);
if (htt->target_version_major != HTT_CURRENT_VERSION_MAJOR) {
ath10k_err("htt major versions are incompatible!\n");
ath10k_info("htt target version %d.%d\n",
htt->target_version_major, htt->target_version_minor);
if (htt->target_version_major != 2 &&
htt->target_version_major != 3) {
ath10k_err("unsupported htt major version %d. supported versions are 2 and 3\n",
htt->target_version_major);
return -ENOTSUPP;
}
if (htt->target_version_minor != HTT_CURRENT_VERSION_MINOR)
ath10k_warn("htt minor version differ but still compatible\n");
return 0;
}
......
drivers/net/wireless/ath/ath10k/htt.h
View file @ 961d4c38
......@@ -23,9 +23,6 @@
#include "htc.h"
#include "rx_desc.h"
#define HTT_CURRENT_VERSION_MAJOR 2
#define HTT_CURRENT_VERSION_MINOR 1
enum htt_dbg_stats_type {
HTT_DBG_STATS_WAL_PDEV_TXRX = 1 << 0,
HTT_DBG_STATS_RX_REORDER = 1 << 1,
......@@ -45,6 +42,9 @@ enum htt_h2t_msg_type { /* host-to-target */
HTT_H2T_MSG_TYPE_SYNC = 4,
HTT_H2T_MSG_TYPE_AGGR_CFG = 5,
HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG = 6,
/* This command is used for sending management frames in HTT < 3.0.
* HTT >= 3.0 uses TX_FRM for everything. */
HTT_H2T_MSG_TYPE_MGMT_TX = 7,
HTT_H2T_NUM_MSGS /* keep this last */
......
drivers/net/wireless/ath/ath10k/htt_tx.c
View file @ 961d4c38
......@@ -401,10 +401,16 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
goto err;
}
txfrag = dev_alloc_skb(frag_len);
if (!txfrag) {
res = -ENOMEM;
goto err;
/* Since HTT 3.0 there is no separate mgmt tx command. However in case
* of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx
* fragment list host driver specifies directly frame pointer. */
if (htt->target_version_major < 3 ||
!ieee80211_is_mgmt(hdr->frame_control)) {
txfrag = dev_alloc_skb(frag_len);
if (!txfrag) {
res = -ENOMEM;
goto err;
}
}
if (!IS_ALIGNED((unsigned long)txdesc->data, 4)) {
......@@ -427,23 +433,31 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
if (res)
goto err;
/* tx fragment list must be terminated with zero-entry */
skb_put(txfrag, frag_len);
tx_frags = (struct htt_data_tx_desc_frag *)txfrag->data;
tx_frags[0].paddr = __cpu_to_le32(ATH10K_SKB_CB(msdu)->paddr);
tx_frags[0].len = __cpu_to_le32(msdu->len);
tx_frags[1].paddr = __cpu_to_le32(0);
tx_frags[1].len = __cpu_to_le32(0);
res = ath10k_skb_map(dev, txfrag);
if (res)
goto err;
/* Since HTT 3.0 there is no separate mgmt tx command. However in case
* of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx
* fragment list host driver specifies directly frame pointer. */
if (htt->target_version_major < 3 ||
!ieee80211_is_mgmt(hdr->frame_control)) {
/* tx fragment list must be terminated with zero-entry */
skb_put(txfrag, frag_len);
tx_frags = (struct htt_data_tx_desc_frag *)txfrag->data;
tx_frags[0].paddr = __cpu_to_le32(ATH10K_SKB_CB(msdu)->paddr);
tx_frags[0].len = __cpu_to_le32(msdu->len);
tx_frags[1].paddr = __cpu_to_le32(0);
tx_frags[1].len = __cpu_to_le32(0);
res = ath10k_skb_map(dev, txfrag);
if (res)
goto err;
ath10k_dbg(ATH10K_DBG_HTT, "txfrag 0x%llx\n",
(unsigned long long) ATH10K_SKB_CB(txfrag)->paddr);
ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "txfrag: ",
txfrag->data, frag_len);
}
ath10k_dbg(ATH10K_DBG_HTT, "txfrag 0x%llx msdu 0x%llx\n",
(unsigned long long) ATH10K_SKB_CB(txfrag)->paddr,
ath10k_dbg(ATH10K_DBG_HTT, "msdu 0x%llx\n",
(unsigned long long) ATH10K_SKB_CB(msdu)->paddr);
ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "txfrag: ",
txfrag->data, frag_len);
ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "msdu: ",
msdu->data, msdu->len);
......@@ -459,8 +473,17 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
if (!ieee80211_has_protected(hdr->frame_control))
flags0 |= HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT;
flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI,
HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
/* Since HTT 3.0 there is no separate mgmt tx command. However in case
* of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx
* fragment list host driver specifies directly frame pointer. */
if (htt->target_version_major >= 3 &&
ieee80211_is_mgmt(hdr->frame_control))
flags0 |= SM(ATH10K_HW_TXRX_MGMT,
HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
else
flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI,
HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
flags1 = 0;
flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID);
......@@ -468,7 +491,14 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD;
flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD;
frags_paddr = ATH10K_SKB_CB(txfrag)->paddr;
/* Since HTT 3.0 there is no separate mgmt tx command. However in case
* of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx
* fragment list host driver specifies directly frame pointer. */
if (htt->target_version_major >= 3 &&
ieee80211_is_mgmt(hdr->frame_control))
frags_paddr = ATH10K_SKB_CB(msdu)->paddr;
else
frags_paddr = ATH10K_SKB_CB(txfrag)->paddr;
cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_TX_FRM;
cmd->data_tx.flags0 = flags0;
......
drivers/net/wireless/ath/ath10k/hw.h
View file @ 961d4c38
......@@ -45,6 +45,9 @@ enum ath10k_hw_txrx_mode {
ATH10K_HW_TXRX_RAW = 0,
ATH10K_HW_TXRX_NATIVE_WIFI = 1,
ATH10K_HW_TXRX_ETHERNET = 2,
/* Valid for HTT >= 3.0. Used for management frames in TX_FRM. */
ATH10K_HW_TXRX_MGMT = 3,
};
enum ath10k_mcast2ucast_mode {
......
drivers/net/wireless/ath/ath10k/mac.c
View file @ 961d4c38
......@@ -1473,6 +1473,12 @@ static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
int ret;
if (ar->htt.target_version_major >= 3) {
/* Since HTT 3.0 there is no separate mgmt tx command */
ret = ath10k_htt_tx(&ar->htt, skb);
goto exit;
}
if (ieee80211_is_mgmt(hdr->frame_control))
ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
else if (ieee80211_is_nullfunc(hdr->frame_control))
......@@ -1484,6 +1490,7 @@ static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
else
ret = ath10k_htt_tx(&ar->htt, skb);
exit:
if (ret) {
ath10k_warn("tx failed (%d). dropping packet.\n", ret);
ieee80211_free_txskb(ar->hw, skb);
......@@ -1720,8 +1727,10 @@ static void ath10k_tx(struct ieee80211_hw *hw,
/* we must calculate tid before we apply qos workaround
* as we'd lose the qos control field */
tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
if (ieee80211_is_data_qos(hdr->frame_control) &&
is_unicast_ether_addr(ieee80211_get_DA(hdr))) {
if (ieee80211_is_mgmt(hdr->frame_control)) {
tid = HTT_DATA_TX_EXT_TID_MGMT;
} else if (ieee80211_is_data_qos(hdr->frame_control) &&
is_unicast_ether_addr(ieee80211_get_DA(hdr))) {
u8 *qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7