Commit 9667a364 authored by Zhao Qiang's avatar Zhao Qiang Committed by Scott Wood

powerpc/p1010rdb:update dts to adapt to both old and new p1010rdb

P1010rdb-pa and p1010rdb-pb have different phy interrupts.
So update dts to adapt to both p1010rdb-pa and p1010rdb-pb.
Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: default avatarZhao Qiang <B45475@freescale.com>
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
parent 01c9ccee
...@@ -15,52 +15,21 @@ / { ...@@ -15,52 +15,21 @@ / {
model = "fsl,P1010RDB"; model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB"; compatible = "fsl,P1010RDB";
memory { /include/ "p1010rdb_32b.dtsi"
device_type = "memory"; };
};
board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
reg = <0x0 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 { /include/ "p1010rdb.dtsi"
reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0 &phy0 {
0x1000000 0x0 0x0 interrupts = <3 1 0 0>;
0x0 0x100000>; };
};
};
pci1: pcie@ffe0a000 { &phy1 {
reg = <0 0xffe0a000 0 0x1000>; interrupts = <2 1 0 0>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 };
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0 &phy2 {
0x1000000 0x0 0x0 interrupts = <2 1 0 0>;
0x0 0x100000>;
};
};
}; };
/include/ "p1010rdb.dtsi"
/include/ "fsl/p1010si-post.dtsi" /include/ "fsl/p1010si-post.dtsi"
...@@ -38,52 +38,21 @@ / { ...@@ -38,52 +38,21 @@ / {
model = "fsl,P1010RDB"; model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB"; compatible = "fsl,P1010RDB";
memory { /include/ "p1010rdb_36b.dtsi"
device_type = "memory"; };
};
board_ifc: ifc: ifc@fffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0xf 0xee000000 0x02000000
0x1 0x0 0xf 0xff800000 0x00010000
0x3 0x0 0xf 0xffb00000 0x00000020>;
reg = <0xf 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 { /include/ "p1010rdb.dtsi"
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0 &phy0 {
0x1000000 0x0 0x0 interrupts = <3 1 0 0>;
0x0 0x100000>; };
};
};
pci1: pcie@fffe0a000 { &phy1 {
reg = <0xf 0xffe0a000 0 0x1000>; interrupts = <2 1 0 0>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 };
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0 &phy2 {
0x1000000 0x0 0x0 interrupts = <2 1 0 0>;
0x0 0x100000>;
};
};
}; };
/include/ "p1010rdb.dtsi"
/include/ "fsl/p1010si-post.dtsi" /include/ "fsl/p1010si-post.dtsi"
/*
* P1010 RDB Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB-PB";
compatible = "fsl,P1010RDB-PB";
/include/ "p1010rdb_32b.dtsi"
};
/include/ "p1010rdb.dtsi"
&phy0 {
interrupts = <0 1 0 0>;
};
&phy1 {
interrupts = <2 1 0 0>;
};
&phy2 {
interrupts = <1 1 0 0>;
};
/include/ "fsl/p1010si-post.dtsi"
/*
* P1010 RDB Device Tree Source (36-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB-PB";
compatible = "fsl,P1010RDB-PB";
/include/ "p1010rdb_36b.dtsi"
};
/include/ "p1010rdb.dtsi"
&phy0 {
interrupts = <0 1 0 0>;
};
&phy1 {
interrupts = <2 1 0 0>;
};
&phy2 {
interrupts = <1 1 0 0>;
};
/include/ "fsl/p1010si-post.dtsi"
...@@ -193,17 +193,14 @@ usb@22000 { ...@@ -193,17 +193,14 @@ usb@22000 {
mdio@24000 { mdio@24000 {
phy0: ethernet-phy@0 { phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>; reg = <0x1>;
}; };
phy1: ethernet-phy@1 { phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x0>; reg = <0x0>;
}; };
phy2: ethernet-phy@2 { phy2: ethernet-phy@2 {
interrupts = <2 1 0 0>;
reg = <0x2>; reg = <0x2>;
}; };
......
/*
* P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
memory {
device_type = "memory";
};
board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
reg = <0x0 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
/*
* P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
memory {
device_type = "memory";
};
board_ifc: ifc: ifc@fffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0xf 0xee000000 0x02000000
0x1 0x0 0xf 0xff800000 0x00010000
0x3 0x0 0xf 0xffb00000 0x00000020>;
reg = <0xf 0xffe1e000 0 0x2000>;
};
board_soc: soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment