Commit 96bcd090 authored by Julia Lawall's avatar Julia Lawall Committed by Greg Kroah-Hartman

USB: musb uses endpoint functions

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>
Signed-off-by: default avatarJulia Lawall <julia@diku.dk>
Acked-by: default avatarFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent af7e0c5f
...@@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep, ...@@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep,
status = -EBUSY; status = -EBUSY;
goto fail; goto fail;
} }
musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; musb_ep->type = usb_endpoint_type(desc);
/* check direction and (later) maxpacket size against endpoint */ /* check direction and (later) maxpacket size against endpoint */
if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum) if (usb_endpoint_num(desc) != epnum)
goto fail; goto fail;
/* REVISIT this rules out high bandwidth periodic transfers */ /* REVISIT this rules out high bandwidth periodic transfers */
...@@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep, ...@@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
* packet size (or fail), set the mode, clear the fifo * packet size (or fail), set the mode, clear the fifo
*/ */
musb_ep_select(mbase, epnum); musb_ep_select(mbase, epnum);
if (desc->bEndpointAddress & USB_DIR_IN) { if (usb_endpoint_dir_in(desc)) {
u16 int_txe = musb_readw(mbase, MUSB_INTRTXE); u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
if (hw_ep->is_shared_fifo) if (hw_ep->is_shared_fifo)
......
...@@ -1847,8 +1847,8 @@ static int musb_urb_enqueue( ...@@ -1847,8 +1847,8 @@ static int musb_urb_enqueue(
goto done; goto done;
} }
qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; qh->epnum = usb_endpoint_num(epd);
qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; qh->type = usb_endpoint_type(epd);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe); qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment