Commit 96c8b690 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Linus Walleij

pinctrl: uniphier: prohibit drive control for pin 61-66 of PH1-LD11

According to the hardware document, setting the drive control is
prohibited for these pins (N-channel Open Drain pins).  Set their
drive control attribute to "fixed".
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 0c3013bb
...@@ -151,22 +151,22 @@ static const struct pinctrl_pin_desc uniphier_ld11_pins[] = { ...@@ -151,22 +151,22 @@ static const struct pinctrl_pin_desc uniphier_ld11_pins[] = {
60, UNIPHIER_PIN_DRV_1BIT, 60, UNIPHIER_PIN_DRV_1BIT,
60, UNIPHIER_PIN_PULL_DOWN), 60, UNIPHIER_PIN_PULL_DOWN),
UNIPHIER_PINCTRL_PIN(61, "DMDSDA0", 61, UNIPHIER_PINCTRL_PIN(61, "DMDSDA0", 61,
61, UNIPHIER_PIN_DRV_1BIT, -1, UNIPHIER_PIN_DRV_FIXED4,
-1, UNIPHIER_PIN_PULL_NONE), -1, UNIPHIER_PIN_PULL_NONE),
UNIPHIER_PINCTRL_PIN(62, "DMDSCL0", 62, UNIPHIER_PINCTRL_PIN(62, "DMDSCL0", 62,
62, UNIPHIER_PIN_DRV_1BIT, -1, UNIPHIER_PIN_DRV_FIXED4,
-1, UNIPHIER_PIN_PULL_NONE), -1, UNIPHIER_PIN_PULL_NONE),
UNIPHIER_PINCTRL_PIN(63, "SDA0", 63, UNIPHIER_PINCTRL_PIN(63, "SDA0", 63,
63, UNIPHIER_PIN_DRV_1BIT, -1, UNIPHIER_PIN_DRV_FIXED4,
-1, UNIPHIER_PIN_PULL_NONE), -1, UNIPHIER_PIN_PULL_NONE),
UNIPHIER_PINCTRL_PIN(64, "SCL0", 64, UNIPHIER_PINCTRL_PIN(64, "SCL0", 64,
64, UNIPHIER_PIN_DRV_1BIT, -1, UNIPHIER_PIN_DRV_FIXED4,
-1, UNIPHIER_PIN_PULL_NONE), -1, UNIPHIER_PIN_PULL_NONE),
UNIPHIER_PINCTRL_PIN(65, "SDA1", 65, UNIPHIER_PINCTRL_PIN(65, "SDA1", 65,
65, UNIPHIER_PIN_DRV_1BIT, -1, UNIPHIER_PIN_DRV_FIXED4,
-1, UNIPHIER_PIN_PULL_NONE), -1, UNIPHIER_PIN_PULL_NONE),
UNIPHIER_PINCTRL_PIN(66, "SCL1", 66, UNIPHIER_PINCTRL_PIN(66, "SCL1", 66,
66, UNIPHIER_PIN_DRV_1BIT, -1, UNIPHIER_PIN_DRV_FIXED4,
-1, UNIPHIER_PIN_PULL_NONE), -1, UNIPHIER_PIN_PULL_NONE),
UNIPHIER_PINCTRL_PIN(67, "HIN", 67, UNIPHIER_PINCTRL_PIN(67, "HIN", 67,
-1, UNIPHIER_PIN_DRV_FIXED5, -1, UNIPHIER_PIN_DRV_FIXED5,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment