Merge raven.il.steeleye.com:/home/jejb/BK/linux-2.5.64-interim

into raven.il.steeleye.com:/home/jejb/BK/scsi-misc-2.5

drivers/scsi/Kconfig

@@ -946,16 +946,6 @@ config SCSI_SYM53C8XX_2
 	  Please read <file:drivers/scsi/sym53c8xx_2/Documentation.txt> for more
 	  information.
 
-config SCSI_ZALON
-	tristate "Zalon SCSI support"
-	depends on GSC && SCSI
-	help
-	  The Zalon is a GSC/HSC bus interface chip that sits between the
-	  PA-RISC processor and the NCR 53c720 SCSI controller on C100,
-	  C110, J200, J210 and some D, K & R-class machines.  It's also
-	  used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
-	  Say Y here if you have one of these machines or cards.
-
 config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
 	int "DMA addressing mode"
 	depends on SCSI_SYM53C8XX_2
@@ -1010,9 +1000,19 @@ config SCSI_SYM53C8XX_IOMAPPED
 	  If you say Y here, the driver will preferently use normal IO rather than 
 	  memory mapped IO.
 
+config SCSI_ZALON
+	tristate "Zalon SCSI support"
+	depends on GSC && SCSI
+	help
+	  The Zalon is a GSC/HSC bus interface chip that sits between the
+	  PA-RISC processor and the NCR 53c720 SCSI controller on C100,
+	  C110, J200, J210 and some D, K & R-class machines.  It's also
+	  used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
+	  Say Y here if you have one of these machines or cards.
+
 config SCSI_NCR53C8XX
 	tristate "NCR53C8XX SCSI support"
-	depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI
+	depends on PCI && SCSI_SYM53C8XX_2!=y && SCSI_ZALON!=y && SCSI
 	---help---
 	  This is the BSD ncr driver adapted to Linux for the NCR53C8XX family
 	  of PCI-SCSI controllers.  This driver supports parity checking,

drivers/scsi/fdomain.c

@@ -271,13 +271,8 @@
 
  **************************************************************************/
 
+#include <linux/config.h>
 #include <linux/module.h>
-
-#ifdef PCMCIA
-#undef MODULE
-#endif
-
-#include <linux/config.h>	/* for CONFIG_PCI */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/blk.h>
@@ -295,9 +290,13 @@
 
 #include "scsi.h"
 #include "hosts.h"
-#include "fdomain.h"
+
+MODULE_AUTHOR("Rickard E. Faith");
+MODULE_DESCRIPTION("Future domain SCSI driver");
+MODULE_LICENSE("GPL");
+
   
-#define VERSION          "$Revision: 5.50 $"
+#define VERSION          "$Revision: 5.51 $"
 
 /* START OF USER DEFINABLE OPTIONS */
 
@@ -421,15 +420,12 @@ static int               FIFO_Size = 0x2000; /* 8k FIFO for
 
 static void              do_fdomain_16x0_intr( int irq, void *dev_id,
 					    struct pt_regs * regs );
+int		 	fdomain_16x0_bus_reset(Scsi_Cmnd *SCpnt);
 
-#ifdef MODULE
-				/* Allow insmod parameters to be like LILO
-                                   parameters.  For example:
-				   insmod fdomain fdomain=0x140,11
-				*/
+/* Allow insmod parameters to be like LILO parameters.  For example:
+   insmod fdomain fdomain=0x140,11 */
 static char * fdomain = NULL;
 MODULE_PARM(fdomain, "s");
-#endif
 
 static unsigned long addresses[] = {
    0xc8000,
@@ -561,7 +557,7 @@ static void print_banner( struct Scsi_Host *shpnt )
    printk( "\n" );
 }
 
-static int __init fdomain_setup(char *str)
+int __init fdomain_setup(char *str)
 {
 	int ints[4];
 
@@ -862,7 +858,7 @@ static int fdomain_pci_bios_detect( int *irq, int *iobase, struct pci_dev **ret_
 }
 #endif
 
-static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
+struct Scsi_Host *__fdomain_16x0_detect( Scsi_Host_Template *tpnt )
 {
    int              retcode;
    struct Scsi_Host *shpnt;
@@ -879,13 +875,6 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
    unsigned char    buf[buflen];
 #endif
 
-   tpnt->proc_name = "fdomain";
-
-#ifdef MODULE
-	if (fdomain)
-		fdomain_setup(fdomain);
-#endif
-   
    if (setup_called) {
 #if DEBUG_DETECT
       printk( "scsi: <fdomain> No BIOS, using port_base = 0x%x, irq = %d\n",
@@ -895,7 +884,7 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
 	 printk( "scsi: <fdomain> Cannot locate chip at port base 0x%x\n",
 		 port_base );
 	 printk( "scsi: <fdomain> Bad LILO/INSMOD parameters?\n" );
-	 return 0;
+	 return NULL;
       }
    } else {
       int flag = 0;
@@ -910,7 +899,7 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
 
 	 if (!flag) {
 	    printk( "scsi: <fdomain> Detection failed (no card)\n" );
-	    return 0;
+	    return NULL;
 	 }
       }
    }
@@ -936,7 +925,7 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
       if (setup_called) {
 	 printk(KERN_ERR "scsi: <fdomain> Bad LILO/INSMOD parameters?\n");
       }
-      return 0;
+      return NULL;
    }
 
    if (this_id) {
@@ -957,7 +946,7 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
 
    shpnt = scsi_register( tpnt, 0 );
    if(shpnt == NULL)
-   	return 0;
+   	return NULL;
    shpnt->irq = interrupt_level;
    shpnt->io_port = port_base;
    scsi_set_device(shpnt, &pdev->dev);
@@ -967,7 +956,7 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
    /* Log IRQ with kernel */   
    if (!interrupt_level) {
       printk(KERN_ERR "scsi: <fdomain> Card Detected, but driver not loaded (no IRQ)\n" );
-      return 0;
+      return NULL;
    } else {
       /* Register the IRQ with the kernel */
 
@@ -988,7 +977,7 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
 	    printk(KERN_ERR "                Send mail to faith@acm.org\n" );
 	 }
 	 printk(KERN_ERR "scsi: <fdomain> Detected, but driver not loaded (IRQ)\n" );
-	 return 0;
+	 return NULL;
       }
    }
 
@@ -1048,7 +1037,14 @@ static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
    }
 #endif
 
-   return 1;			/* Maximum of one adapter will be detected. */
+   return shpnt;
+}
+
+static int fdomain_16x0_detect( Scsi_Host_Template *tpnt )
+{
+	if (fdomain)
+		fdomain_setup(fdomain);
+	return (__fdomain_16x0_detect(tpnt) != NULL);
 }
 
 static const char *fdomain_16x0_info( struct Scsi_Host *ignore )
@@ -1150,8 +1146,9 @@ static int fdomain_select( int target )
 {
    int           status;
    unsigned long timeout;
+#if ERRORS_ONLY
    static int    flag = 0;
-
+#endif
 
    outb( 0x82, SCSI_Cntl_port ); /* Bus Enable + Select */
    outb( adapter_mask | (1 << target), SCSI_Data_NoACK_port );
@@ -1574,6 +1571,7 @@ static int fdomain_16x0_command(Scsi_Cmnd *SCpnt)
 
 /* End of code derived from Tommy Thorn's work. */
 
+#if DEBUG_ABORT
 static void print_info(Scsi_Cmnd *SCpnt)
 {
    unsigned int imr;
@@ -1643,6 +1641,7 @@ static void print_info(Scsi_Cmnd *SCpnt)
 	 printk( "Configuration 2  = 0x%02x\n",
 		 inb( port_base + Configuration2 ) );
 }
+#endif
 
 static int fdomain_16x0_abort( Scsi_Cmnd *SCpnt)
 {
@@ -1670,7 +1669,7 @@ static int fdomain_16x0_abort( Scsi_Cmnd *SCpnt)
    return SUCCESS;
 }
 
-static int fdomain_16x0_bus_reset(Scsi_Cmnd *SCpnt)
+int fdomain_16x0_bus_reset(Scsi_Cmnd *SCpnt)
 {
    outb( 1, SCSI_Cntl_port );
    do_pause( 2 );
@@ -1866,9 +1865,29 @@ static int fdomain_16x0_release(struct Scsi_Host *shpnt)
 	return 0;
 }
 
-MODULE_LICENSE("GPL");
-
-/* Eventually this will go into an include file, but this will be later */
-static Scsi_Host_Template driver_template = FDOMAIN_16X0;
+Scsi_Host_Template fdomain_driver_template = {
+	.module			= THIS_MODULE,
+	.name			= "fdomain",
+	.proc_name		= "fdomain",
+	.proc_info		= fdomain_16x0_proc_info,
+	.detect			= fdomain_16x0_detect,
+	.info			= fdomain_16x0_info,
+	.command		= fdomain_16x0_command,
+	.queuecommand		= fdomain_16x0_queue,
+	.eh_abort_handler	= fdomain_16x0_abort,
+	.eh_bus_reset_handler	= fdomain_16x0_bus_reset,
+	.eh_device_reset_handler = fdomain_16x0_device_reset,
+	.eh_host_reset_handler	= fdomain_16x0_host_reset,
+	.bios_param		= fdomain_16x0_biosparam,
+	.release		= fdomain_16x0_release,
+	.can_queue		= 1,
+	.this_id		= 6,
+	.sg_tablesize		= 64,
+	.cmd_per_lun		= 1,
+	.use_clustering		= DISABLE_CLUSTERING,
+};
 
+#ifndef PCMCIA
+#define driver_template fdomain_driver_template
 #include "scsi_module.c"
+#endif

drivers/scsi/fdomain.h

-/* fdomain.h -- Header for Future Domain TMC-16x0 driver
- * Created: Sun May  3 18:47:33 1992 by faith@cs.unc.edu
- * Revised: Thu Oct 12 13:21:35 1995 by faith@acm.org
- * Author: Rickard E. Faith, faith@cs.unc.edu
- * Copyright 1992, 1993, 1994, 1995 Rickard E. Faith
- *
- * $Id: fdomain.h,v 5.12 1995/10/12 19:01:09 root Exp $
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
-
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef _FDOMAIN_H
-#define _FDOMAIN_H
-
-static int        fdomain_16x0_detect( Scsi_Host_Template *);
-static int        fdomain_16x0_command( Scsi_Cmnd *);
-static int        fdomain_16x0_abort(Scsi_Cmnd *);
-static const char *fdomain_16x0_info(struct Scsi_Host *);
-static int        fdomain_16x0_bus_reset(Scsi_Cmnd *); 
-static int        fdomain_16x0_host_reset(Scsi_Cmnd *); 
-static int        fdomain_16x0_device_reset(Scsi_Cmnd *); 
-static int        fdomain_16x0_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-static int        fdomain_16x0_biosparam(struct scsi_device *,
-		struct block_device *, sector_t, int * );
-static int        fdomain_16x0_proc_info(char *buffer, char **start, off_t offset,
-				   int length, int hostno, int inout );
-static int        fdomain_16x0_release(struct Scsi_Host *shpnt);
-
-#define FDOMAIN_16X0 { .proc_info      		= fdomain_16x0_proc_info,           \
-		       .detect         		= fdomain_16x0_detect,              \
-		       .info           		= fdomain_16x0_info,                \
-		       .command        		= fdomain_16x0_command,             \
-		       .queuecommand   		= fdomain_16x0_queue,               \
-		       .eh_abort_handler	= fdomain_16x0_abort,               \
-		       .eh_bus_reset_handler	= fdomain_16x0_bus_reset,           \
-		       .eh_device_reset_handler	= fdomain_16x0_device_reset,        \
-		       .eh_host_reset_handler	= fdomain_16x0_host_reset,          \
-		       .bios_param		= fdomain_16x0_biosparam,           \
-		       .release			= fdomain_16x0_release,		  \
-		       .can_queue		= 1, 				  \
-		       .this_id  		= 6, 				  \
-		       .sg_tablesize		= 64, 				  \
-		       .cmd_per_lun		= 1, 				  \
-		       .use_clustering		= DISABLE_CLUSTERING		  \
-}
-#endif

drivers/scsi/ncr53c8xx.c

@@ -5024,7 +5024,6 @@ static int ncr_abort_command (ncb_p np, Scsi_Cmnd *cmd)
 **==========================================================
 */
 
-#ifdef MODULE
 static int ncr_detach(ncb_p np)
 {
 	ccb_p cp;
@@ -5160,7 +5159,6 @@ static int ncr_detach(ncb_p np)
 
 	return 1;
 }
-#endif
 
 /*==========================================================
 **
@@ -8935,7 +8933,6 @@ int ncr53c8xx_abort(Scsi_Cmnd *cmd)
 }
 
 
-#ifdef MODULE
 int ncr53c8xx_release(struct Scsi_Host *host)
 {
 #ifdef DEBUG_NCR53C8XX
@@ -8945,7 +8942,6 @@ printk("ncr53c8xx : release\n");
 
      return 1;
 }
-#endif
 
 
 /*

drivers/scsi/ncr53c8xx.h

@@ -60,17 +60,12 @@ const char *ncr53c8xx_info(struct Scsi_Host *host);
 int ncr53c8xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
 int ncr53c8xx_reset(Scsi_Cmnd *, unsigned int);
 int ncr53c8xx_slave_configure(Scsi_Device *);
-
-#ifdef MODULE
 int ncr53c8xx_release(struct Scsi_Host *);
-#else
-#define ncr53c8xx_release NULL
-#endif
 
 
 #if	LINUX_VERSION_CODE >= LinuxVersionCode(2,1,75)
 
-#define NCR53C8XX {     .name           = "",			\
+#define NCR53C8XX {     .name           = "ncr53c8xx",		\
 			.detect         = ncr53c8xx_detect,	\
 			.release        = ncr53c8xx_release,	\
 			.info           = ncr53c8xx_info, 	\

drivers/scsi/pcmcia/Kconfig

@@ -3,22 +3,11 @@
 #
 
 menu "PCMCIA SCSI adapter support"
-	depends on SCSI!=n && HOTPLUG && PCMCIA!=n
-
-config SCSI_PCMCIA
-	bool "PCMCIA SCSI adapter support"
-	help
-	  Say Y here if you intend to attach a PCMCIA or CardBus card to your
-	  computer which acts as a SCSI host adapter. These are credit card
-	  size devices often used with laptops.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions PCMCIA SCSI host adapters.
+	depends on SCSI!=n && PCMCIA!=n
 
 config PCMCIA_AHA152X
 	tristate "Adaptec AHA152X PCMCIA support"
-	depends on SCSI_PCMCIA && m
+	depends on m
 	help
 	  Say Y here if you intend to attach this type of PCMCIA SCSI host
 	  adapter to your computer.
@@ -30,7 +19,7 @@ config PCMCIA_AHA152X
 
 config PCMCIA_FDOMAIN
 	tristate "Future Domain PCMCIA support"
-	depends on SCSI_PCMCIA && m
+	depends on m
 	help
 	  Say Y here if you intend to attach this type of PCMCIA SCSI host
 	  adapter to your computer.
@@ -42,7 +31,7 @@ config PCMCIA_FDOMAIN
 
 config PCMCIA_NINJA_SCSI
 	tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
-	depends on SCSI_PCMCIA && m
+	depends on m
 	help
 	  If you intend to attach this type of PCMCIA SCSI host adapter to
 	  your computer, say Y here and read
@@ -55,7 +44,7 @@ config PCMCIA_NINJA_SCSI
 
 config PCMCIA_QLOGIC
 	tristate "Qlogic PCMCIA support"
-	depends on SCSI_PCMCIA && m
+	depends on m
 	help
 	  Say Y here if you intend to attach this type of PCMCIA SCSI host
 	  adapter to your computer.
@@ -65,10 +54,4 @@ config PCMCIA_QLOGIC
 	  whenever you want).  If you want to compile it as a module, say M
 	  here and read <file:Documentation/modules.txt>.
 
-config PCMCIA_SCSICARD
-	bool
-	depends on PCMCIA_QLOGIC=y || PCMCIA_AHA152X=y || PCMCIA_FDOMAIN=y || PCMCIA_NINJA_SCSI=y
-	default y
-
 endmenu
-

drivers/scsi/pcmcia/fdomain_stub.c

@@ -61,15 +61,15 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
 MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver");
 MODULE_LICENSE("Dual MPL/GPL");
 
-#define INT_MODULE_PARM(n, v) static int n = v; MODULE_PARM(n, "i")
-
 /* Bit map of interrupts to choose from */
-INT_MODULE_PARM(irq_mask, 0xdeb8);
+static int irq_mask = 0xdeb8;
+MODULE_PARM(irq_mask, "i");
 static int irq_list[4] = { -1 };
 MODULE_PARM(irq_list, "1-4i");
 
 #ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
+static int pc_debug = PCMCIA_DEBUG;
+MODULE_PARM(pc_debug, "i");
 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
 static char *version =
 "fdomain_cs.c 1.47 2001/10/13 00:08:52 (David Hinds)";
@@ -81,11 +81,15 @@ static char *version =
 
 typedef struct scsi_info_t {
     dev_link_t		link;
+    struct Scsi_Host	*host;
     int			ndev;
     dev_node_t		node[8];
 } scsi_info_t;
 
+extern Scsi_Host_Template fdomain_driver_template;
 extern void fdomain_setup(char *str, int *ints);
+extern struct Scsi_Host *__fdomain_16x0_detect( Scsi_Host_Template *tpnt );
+extern int fdomain_16x0_bus_reset(Scsi_Cmnd *SCpnt);
 
 static void fdomain_release(u_long arg);
 static int fdomain_event(event_t event, int priority,
@@ -94,8 +98,6 @@ static int fdomain_event(event_t event, int priority,
 static dev_link_t *fdomain_attach(void);
 static void fdomain_detach(dev_link_t *);
 
-#define driver_template fdomain_driver_template
-extern Scsi_Host_Template fdomain_driver_template;
 
 static dev_link_t *dev_list = NULL;
 
@@ -231,7 +233,6 @@ static void fdomain_config(dev_link_t *link)
     link->conf.ConfigBase = parse.config.base;
 
     /* Configure card */
-    driver_template.module = &__this_module;
     link->state |= DEV_CONFIG;
     
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -260,14 +261,18 @@ static void fdomain_config(dev_link_t *link)
     sprintf(str, "%d,%d", link->io.BasePort1, link->irq.AssignedIRQ);
     fdomain_setup(str, ints);
     
-    scsi_register_host(&driver_template);
+    host = __fdomain_16x0_detect(&fdomain_driver_template);
+    if (!host) {
+        printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
+	goto cs_failed;
+    }
+ 
+    scsi_add_host(host, NULL);
 
     tail = &link->dev;
     info->ndev = 0;
-    for (host = scsi_host_get_next(NULL); host;
-	 host = scsi_host_get_next(host))
-	if (host->hostt == &driver_template)
-	    list_for_each_entry (dev, &host->my_devices, siblings) {
+   
+    list_for_each_entry (dev, &host->my_devices, siblings) {
 	    u_long arg[2], id;
 	    kernel_scsi_ioctl(dev, SCSI_IOCTL_GET_IDLUN, arg);
 	    id = (arg[0]&0x0f) + ((arg[0]>>4)&0xf0) +
@@ -296,10 +301,11 @@ static void fdomain_config(dev_link_t *link)
 	    }
 	    *tail = node; tail = &node->next;
 	    info->ndev++;
-	}
+
+    }
+
     *tail = NULL;
-    if (info->ndev == 0)
-	printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
+    info->host = host;
     
     link->state &= ~DEV_CONFIG_PENDING;
     return;
@@ -316,30 +322,22 @@ static void fdomain_config(dev_link_t *link)
 static void fdomain_release(u_long arg)
 {
     dev_link_t *link = (dev_link_t *)arg;
+    scsi_info_t *info = link->priv;
 
     DEBUG(0, "fdomain_release(0x%p)\n", link);
 
-#warning This does not protect you.  You need some real fix for your races.
-#if 0
-    if (GET_USE_COUNT(&__this_module) != 0) {
-	DEBUG(1, "fdomain_cs: release postponed, "
-	      "device still open\n");
-	link->state |= DEV_STALE_CONFIG;
-	return;
-    }
-#endif
-
-    scsi_unregister_host(&driver_template);
+    scsi_remove_host(info->host);
     link->dev = NULL;
     
     CardServices(ReleaseConfiguration, link->handle);
     CardServices(ReleaseIO, link->handle, &link->io);
     CardServices(ReleaseIRQ, link->handle, &link->irq);
-    
+
+    scsi_unregister(info->host);
+
     link->state &= ~DEV_CONFIG;
     if (link->state & DEV_STALE_LINK)
 	fdomain_detach(link);
-    
 } /* fdomain_release */
 
 /*====================================================================*/
@@ -374,7 +372,7 @@ static int fdomain_event(event_t event, int priority,
     case CS_EVENT_CARD_RESET:
 	if (link->state & DEV_CONFIG) {
 	    CardServices(RequestConfiguration, link->handle, &link->conf);
-	    fdomain_16x0_reset(NULL, 0);
+	    fdomain_16x0_bus_reset(NULL);
 	}
 	break;
     }

drivers/scsi/pcmcia/qlogic_stub.c

@@ -55,7 +55,11 @@
 #include <pcmcia/ds.h>
 #include <pcmcia/ciscode.h>
 
+
+extern Scsi_Host_Template qlogicfas_driver_template;
 extern void qlogicfas_preset(int port, int irq);
+extern struct Scsi_Host *__qlogicfas_detect(Scsi_Host_Template *);
+extern int qlogicfas_bus_reset(Scsi_Cmnd *);
 
 #ifdef PCMCIA_DEBUG
 static int pc_debug = PCMCIA_DEBUG;
@@ -81,6 +85,7 @@ MODULE_PARM(irq_list, "1-4i");
 
 typedef struct scsi_info_t {
 	dev_link_t link;
+	struct Scsi_Host *host;
 	unsigned short manf_id;
 	int ndev;
 	dev_node_t node[8];
@@ -92,9 +97,6 @@ static int qlogic_event(event_t event, int priority, event_callback_args_t * arg
 static dev_link_t *qlogic_attach(void);
 static void qlogic_detach(dev_link_t *);
 
-/* Import our driver template */
-extern Scsi_Host_Template qlogicfas_driver_template;
-#define driver_template qlogicfas_driver_template
 
 static dev_link_t *dev_list = NULL;
 
@@ -233,7 +235,6 @@ static void qlogic_config(dev_link_t * link)
 		info->manf_id = le16_to_cpu(tuple.TupleData[0]);
 
 	/* Configure card */
-	driver_template.module = &__this_module;
 	link->state |= DEV_CONFIG;
 
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -272,46 +273,52 @@ static void qlogic_config(dev_link_t * link)
 	else
 		qlogicfas_preset(link->io.BasePort1, link->irq.AssignedIRQ);
 
-	scsi_register_host(&driver_template);
-
 	tail = &link->dev;
 	info->ndev = 0;
-	for (host = scsi_host_get_next(NULL); host; host = scsi_host_get_next(host))
-		if (host->hostt == &driver_template)
-			list_for_each_entry (dev, &host->my_devices, siblings) {
-				u_long arg[2], id;
-				kernel_scsi_ioctl(dev, SCSI_IOCTL_GET_IDLUN, arg);
-				id = (arg[0] & 0x0f) + ((arg[0] >> 4) & 0xf0) + ((arg[0] >> 8) & 0xf00) + ((arg[0] >> 12) & 0xf000);
-				node = &info->node[info->ndev];
-				node->minor = 0;
-				switch (dev->type) {
-				case TYPE_TAPE:
-					node->major = SCSI_TAPE_MAJOR;
-					sprintf(node->dev_name, "st#%04lx", id);
-					break;
-				case TYPE_DISK:
-				case TYPE_MOD:
-					node->major = SCSI_DISK0_MAJOR;
-					sprintf(node->dev_name, "sd#%04lx", id);
-					break;
-				case TYPE_ROM:
-				case TYPE_WORM:
-					node->major = SCSI_CDROM_MAJOR;
-					sprintf(node->dev_name, "sr#%04lx", id);
-					break;
-				default:
-					node->major = SCSI_GENERIC_MAJOR;
-					sprintf(node->dev_name, "sg#%04lx", id);
-					break;
-				}
-				*tail = node;
-				tail = &node->next;
-				info->ndev++;
-			}
-	*tail = NULL;
-	if (info->ndev == 0)
+
+	host = __qlogicfas_detect(&qlogicfas_driver_template);
+	if (!host) {
 		printk(KERN_INFO "qlogic_cs: no SCSI devices found\n");
+		goto out;
+	}
 
+	scsi_add_host(host, NULL);
+
+	list_for_each_entry(dev, &host->my_devices, siblings) {
+		u_long arg[2], id;
+		kernel_scsi_ioctl(dev, SCSI_IOCTL_GET_IDLUN, arg);
+		id = (arg[0] & 0x0f) + ((arg[0] >> 4) & 0xf0) + ((arg[0] >> 8) & 0xf00) + ((arg[0] >> 12) & 0xf000);
+		node = &info->node[info->ndev];
+		node->minor = 0;
+		switch (dev->type) {
+		case TYPE_TAPE:
+			node->major = SCSI_TAPE_MAJOR;
+			sprintf(node->dev_name, "st#%04lx", id);
+			break;
+		case TYPE_DISK:
+		case TYPE_MOD:
+			node->major = SCSI_DISK0_MAJOR;
+			sprintf(node->dev_name, "sd#%04lx", id);
+			break;
+		case TYPE_ROM:
+		case TYPE_WORM:
+			node->major = SCSI_CDROM_MAJOR;
+			sprintf(node->dev_name, "sr#%04lx", id);
+			break;
+		default:
+			node->major = SCSI_GENERIC_MAJOR;
+			sprintf(node->dev_name, "sg#%04lx", id);
+			break;
+		}
+		*tail = node;
+		tail = &node->next;
+		info->ndev++;
+	}
+
+	*tail = NULL;
+	info->host = host;
+
+out:
 	link->state &= ~DEV_CONFIG_PENDING;
 	return;
 
@@ -327,29 +334,22 @@ static void qlogic_config(dev_link_t * link)
 static void qlogic_release(u_long arg)
 {
 	dev_link_t *link = (dev_link_t *) arg;
+	scsi_info_t *info = link->priv;
 
 	DEBUG(0, "qlogic_release(0x%p)\n", link);
 
-#warning This does not protect you.  You need some real fix for your races.
-#if 0
-	if (GET_USE_COUNT(&__this_module) != 0) {
-		DEBUG(0, "qlogic_cs: release postponed, device still open\n");
-		link->state |= DEV_STALE_CONFIG;
-		return;
-	}
-#endif
-
-	scsi_unregister_host(&driver_template);
+	scsi_remove_host(info->host);
 	link->dev = NULL;
 
 	CardServices(ReleaseConfiguration, link->handle);
 	CardServices(ReleaseIO, link->handle, &link->io);
 	CardServices(ReleaseIRQ, link->handle, &link->irq);
 
+	scsi_unregister(info->host);
+
 	link->state &= ~DEV_CONFIG;
 	if (link->state & DEV_STALE_LINK)
 		qlogic_detach(link);
-
 }				/* qlogic_release */
 
 /*====================================================================*/
@@ -390,7 +390,7 @@ static int qlogic_event(event_t event, int priority, event_callback_args_t * arg
 				outb(0x04, link->io.BasePort1 + 0xd);
 			}
 			/* Ugggglllyyyy!!! */
-			driver_template.eh_bus_reset_handler(NULL);
+			qlogicfas_bus_reset(NULL);
 		}
 		break;
 	}

drivers/scsi/qlogicfas.c

@@ -127,11 +127,6 @@
 #endif
 
 #include <linux/module.h>
-
-#ifdef PCMCIA
-#undef MODULE
-#endif
-
 #include <linux/blk.h>		/* to get disk capacity */
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -148,7 +143,6 @@
 
 #include "scsi.h"
 #include "hosts.h"
-#include "qlogicfas.h"
 
 /*----------------------------------------------------------------*/
 /* driver state info, local to driver */
@@ -166,6 +160,8 @@ static int qlcfg8 = (SLOWCABLE << 7) | (QL_ENABLE_PARITY << 4);
 static int qlcfg9 = ((XTALFREQ + 4) / 5);
 static int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4);
 
+int qlogicfas_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
+
 /*----------------------------------------------------------------*/
 /* The qlogic card uses two register maps - These macros select which one */
 #define REG0 ( outb( inb( qbase + 0xd ) & 0x7f , qbase + 0xd ), outb( 4 , qbase + 0xd ))
@@ -631,14 +627,12 @@ void qlogicfas_preset(int port, int irq)
  *	Look for qlogic card and init if found 
  */
  
-int __devinit qlogicfas_detect(Scsi_Host_Template * host)
+struct Scsi_Host *__qlogicfas_detect(Scsi_Host_Template *host)
 {
 	int i, j;		/* these are only used by IRQ detect */
 	int qltyp;		/* type of chip */
 	struct Scsi_Host *hreg;	/* registered host structure */
 
-	host->proc_name = "qlogicfas";
-
 	/*	Qlogic Cards only exist at 0x230 or 0x330 (the chip itself
 	 *	decodes the address - I check 230 first since MIDI cards are
 	 *	typically at 0x330
@@ -659,7 +653,7 @@ int __devinit qlogicfas_detect(Scsi_Host_Template * host)
 			release_region(qbase, 0x10);
 		}
 		if (qbase == 0x430)
-			return 0;
+			return NULL;;
 	} else
 		printk(KERN_INFO "Ql: Using preset base address of %03x\n", qbase);
 
@@ -726,16 +720,21 @@ int __devinit qlogicfas_detect(Scsi_Host_Template * host)
 		qltyp, qbase, qlirq, QL_TURBO_PDMA);
 	host->name = qinfo;
 
-	return 1;
+	return hreg;
 
 err_release_mem:
 	release_region(qbase, 0x10);
 	if (host->can_queue)
 		free_irq(qlirq, do_ql_ihandl);
-	return 0;
+	return NULL;;
 
 }
 
+int __devinit qlogicfas_detect(Scsi_Host_Template *sht)
+{
+	return (__qlogicfas_detect(sht) != NULL);
+}
+
 /* 
  *	Return bios parameters 
  */
@@ -777,7 +776,7 @@ static int qlogicfas_abort(Scsi_Cmnd * cmd)
  *	the PCMCIA qlogic_stub code. This wants fixing
  */
 
-static int qlogicfas_bus_reset(Scsi_Cmnd * cmd)
+int qlogicfas_bus_reset(Scsi_Cmnd * cmd)
 {
 	qabort = 2;
 	ql_zap();
@@ -818,9 +817,27 @@ MODULE_LICENSE("GPL");
 /*
  *	The driver template is also needed for PCMCIA
  */
- 
-Scsi_Host_Template qlogicfas_driver_template = QLOGICFAS;
+Scsi_Host_Template qlogicfas_driver_template = {
+	.module			= THIS_MODULE,
+	.name			= "qlogicfas",
+	.proc_name		= "qlogicfas",
+	.detect			= qlogicfas_detect,
+	.info			= qlogicfas_info,
+	.command		= qlogicfas_command,
+	.queuecommand		= qlogicfas_queuecommand,
+	.eh_abort_handler	= qlogicfas_abort,
+	.eh_bus_reset_handler	= qlogicfas_bus_reset,
+	.eh_device_reset_handler= qlogicfas_device_reset,
+	.eh_host_reset_handler	= qlogicfas_host_reset,
+	.bios_param		= qlogicfas_biosparam,
+	.can_queue		= 0,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.cmd_per_lun		= 1,
+	.use_clustering		= DISABLE_CLUSTERING,
+};
+
+#ifndef PCMCIA
 #define driver_template qlogicfas_driver_template
-
 #include "scsi_module.c"
-
+#endif

drivers/scsi/qlogicfas.h

-#ifndef _QLOGICFAS_H
-#define _QLOGICFAS_H
-
-static int qlogicfas_detect(Scsi_Host_Template * );
-static const char * qlogicfas_info(struct Scsi_Host *);
-static int qlogicfas_command(Scsi_Cmnd *);
-static int qlogicfas_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
-static int qlogicfas_abort(Scsi_Cmnd *);
-static int qlogicfas_bus_reset(Scsi_Cmnd *);
-static int qlogicfas_device_reset(Scsi_Cmnd *);
-static int qlogicfas_host_reset(Scsi_Cmnd *);
-static int qlogicfas_biosparam(struct scsi_device *, struct block_device *,
-			       sector_t, int[]);
-
-#define QLOGICFAS {						\
-	.detect         		= qlogicfas_detect,	\
-	.info           		= qlogicfas_info,		\
-	.command     			= qlogicfas_command, 	\
-	.queuecommand			= qlogicfas_queuecommand,	\
-	.eh_abort_handler          	= qlogicfas_abort,	\
-	.eh_bus_reset_handler		= qlogicfas_bus_reset,	\
-	.eh_device_reset_handler        = qlogicfas_device_reset,	\
-	.eh_host_reset_handler          = qlogicfas_host_reset,	\
-	.bios_param     = qlogicfas_biosparam,			\
-	.can_queue      = 0,					\
-	.this_id        = -1,					\
-	.sg_tablesize   = SG_ALL,					\
-	.cmd_per_lun    = 1,					\
-	.use_clustering = DISABLE_CLUSTERING			\
-}
-#endif /* _QLOGICFAS_H */
-
-
-

drivers/scsi/sd.c

@@ -1197,7 +1197,7 @@ sd_init_onedisk(struct scsi_disk * sdkp, struct gendisk *disk)
 		return;
 	}
 
-	buffer = kmalloc(512, GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
 	if (!buffer) {
 		printk(KERN_WARNING "(sd_init_onedisk:) Memory allocation "
 		       "failure.\n");

drivers/scsi/sr.c

@@ -604,7 +604,7 @@ static void get_sectorsize(struct scsi_cd *cd)
 	struct scsi_request *SRpnt = NULL;
 	request_queue_t *queue;
 
-	buffer = kmalloc(512, GFP_DMA);
+	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
 	if (!buffer)
 		goto Enomem;
 	SRpnt = scsi_allocate_request(cd->device);
@@ -698,7 +698,7 @@ static void get_sectorsize(struct scsi_cd *cd)
 	goto out;
 }
 
-void get_capabilities(struct scsi_cd *cd)
+static void get_capabilities(struct scsi_cd *cd)
 {
 	struct cdrom_generic_command cgc;
 	unsigned char *buffer;
@@ -716,9 +716,8 @@ void get_capabilities(struct scsi_cd *cd)
 		""
 	};
 
-	buffer = kmalloc(512, GFP_DMA);
-	if (!buffer)
-	{
+	buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+	if (!buffer) {
 		printk(KERN_ERR "sr: out of memory.\n");
 		return;
 	}

drivers/scsi/sym53c8xx.c

@@ -112,8 +112,8 @@
 #include <asm/spinlock.h>
 #endif
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/signal.h>
-#include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/pci.h>
 #include <linux/string.h>
@@ -7214,7 +7214,6 @@ static int ncr_abort_command (ncb_p np, Scsi_Cmnd *cmd)
 **==========================================================
 */
 
-#ifdef MODULE
 static int ncr_detach(ncb_p np)
 {
 	int i;
@@ -7260,7 +7259,6 @@ static int ncr_detach(ncb_p np)
 
 	return 1;
 }
-#endif
 
 /*==========================================================
 **
@@ -12958,6 +12956,7 @@ if (sym53c8xx)
 		}
 		if (i != count)	/* Ignore this device if we already have it */
 			continue;
+		pci_set_master(pcidev);
 		devp = &devtbl[count];
 		devp->host_id = driver_setup.host_id;
 		devp->attach_done = 0;
@@ -13798,7 +13797,6 @@ int sym53c8xx_abort(Scsi_Cmnd *cmd)
 }
 
 
-#ifdef MODULE
 int sym53c8xx_release(struct Scsi_Host *host)
 {
 #ifdef DEBUG_SYM53C8XX
@@ -13808,7 +13806,6 @@ printk("sym53c8xx : release\n");
 
      return 1;
 }
-#endif
 
 
 /*

drivers/scsi/sym53c8xx.h

@@ -75,17 +75,11 @@ const char *sym53c8xx_info(struct Scsi_Host *host);
 int sym53c8xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
 int sym53c8xx_reset(Scsi_Cmnd *, unsigned int);
 int sym53c8xx_slave_configure(Scsi_Device *);
-
-#ifdef MODULE
 int sym53c8xx_release(struct Scsi_Host *);
-#else
-#define sym53c8xx_release NULL
-#endif
-
 
 #if	LINUX_VERSION_CODE >= LinuxVersionCode(2,1,75)
 
-#define SYM53C8XX {     .name           = "",			\
+#define SYM53C8XX {     .name           = "sym53c8xx",		\
 			.detect         = sym53c8xx_detect,	\
 			.release        = sym53c8xx_release,	\
 			.info           = sym53c8xx_info, 	\

drivers/scsi/zalon.c

@@ -151,7 +151,6 @@ int zalon7xx_detect(Scsi_Host_Template *tpnt)
 	return (hosts_used != 0);
 }
 
-#ifdef MODULE
 extern int ncr53c8xx_release(struct Scsi_Host *host);
 
 int zalon7xx_release(struct Scsi_Host *host)
@@ -160,4 +159,3 @@ int zalon7xx_release(struct Scsi_Host *host)
 	unregister_parisc_driver(&zalon_driver);
 	return 1;
 }
-#endif

drivers/scsi/zalon.h

@@ -15,12 +15,7 @@ extern struct proc_dir_entry proc_scsi_zalon7xx;
 int zalon7xx_detect(Scsi_Host_Template *tpnt);
 const char *ncr53c8xx_info(struct Scsi_Host *host);
 int ncr53c8xx_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-
-#ifdef MODULE
 int zalon7xx_release(struct Scsi_Host *);
-#else
-#define zalon7xx_release NULL
-#endif
 
 #define GSC_SCSI_ZALON_OFFSET 0x800