Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add support to enable/disable the thermal zones resulting on core
   code and drivers cleanup (Andrzej Pietrasiewicz)

 - Add generic netlink support for userspace notifications: events,
   temperature and discovery commands (Daniel Lezcano)

 - Fix redundant initialization for a ret variable (Colin Ian King)

 - Remove the clock cooling code as it is used nowhere (Amit Kucheria)

 - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
   Rotariu)

 - Replace all references to thermal.txt in the documentation to the
   corresponding yaml files (Amit Kucheria)

 - Add maintainer entry for the IPA (Lukasz Luba)

 - Add support for MSM8939 for the tsens (Shawn Guo)

 - Update power allocator and devfreq cooling to SPDX licensing (Lukasz
   Luba)

 - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)

 - Add tsensor support for V2 mediatek thermal system (Henry Yen)

 - Fix thermal zone lookup by ID for the core code (Thierry Reding)

* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
  thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
  thermal: mediatek: Add tsensor support for V2 thermal system
  thermal: mediatek: Prepare to add support for other platforms
  thermal: Update power allocator and devfreq cooling to SPDX licensing
  MAINTAINERS: update entry to thermal governors file name prefixing
  thermal: core: Add thermal zone enable/disable notification
  thermal: qcom: tsens-v0_1: Add support for MSM8939
  dt-bindings: tsens: qcom: Document MSM8939 compatible
  thermal: core: Fix thermal zone lookup by ID
  thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
  thermal: imx8mm: Support module autoloading
  thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
  MAINTAINERS: Add maintenance information for IPA
  thermal: rcar_gen3_thermal: Do not shadow thcode variable
  dt-bindings: thermal: Get rid of thermal.txt and replace references
  thermal: core: Move initialization after core initcall
  thermal: netlink: Improve the initcall ordering
  net: genetlink: Move initialization to core_initcall
  thermal: rcar_gen3_thermal: Add r8a774e1 support
  thermal/drivers/clock_cooling: Remove clock_cooling code
  ...

Documentation/devicetree/bindings/arm/arm,scmi.txt

@@ -102,7 +102,7 @@ Required sub-node properties:
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/thermal/thermal.txt
+[3] Documentation/devicetree/bindings/thermal/thermal*.yaml
 [4] Documentation/devicetree/bindings/sram/sram.yaml
 [5] Documentation/devicetree/bindings/reset/reset.txt
 

Documentation/devicetree/bindings/arm/arm,scpi.txt

@@ -108,7 +108,7 @@ Required properties:
 
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/thermal/thermal.txt
+[2] Documentation/devicetree/bindings/thermal/thermal*.yaml
 [3] Documentation/devicetree/bindings/sram/sram.yaml
 [4] Documentation/devicetree/bindings/power/power-domain.yaml
 

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

@@ -176,7 +176,7 @@ Required properties:
 				  "fsl,imx8qxp-sc-thermal"
 				followed by "fsl,imx-sc-thermal";
 
-- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal.txt
+- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
 				for a description.
 
 Example (imx8qxp):

Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt

@@ -111,7 +111,7 @@ Thermal:
 --------
 
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal.txt
+Documentation/devicetree/bindings/thermal/thermal*.yaml
 
 The thermal IP can probe the temperature all around the processor. It
 may feature several channels, each of them wired to one sensor.

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt

@@ -203,7 +203,7 @@ It is possible to setup an overheat interrupt by giving at least one
 critical point to any subnode of the thermal-zone node.
 
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal.txt
+Documentation/devicetree/bindings/thermal/thermal*.yaml
 
 Required properties:
 - compatible: must be one of:

Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt

@@ -18,7 +18,8 @@ Optional properties:
   in unit of nanoseconds.
 - voltage-tolerance: Specify the CPU voltage tolerance in percentage.
 - #cooling-cells:
-     Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+     Please refer to
+     Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
 
 Examples:
 

Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt

@@ -21,8 +21,8 @@ Optional properties:
 	       flow is handled by hardware, hence no software "voltage tracking" is
 	       needed.
 - #cooling-cells:
-	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt
-	for detail.
+	For details, please refer to
+	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
 
 Example 1 (MT7623 SoC):
 

Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt

@@ -5,7 +5,7 @@ Required properties:
 - clocks: Must contain an entry for the CPU clock.
   See ../clocks/clock-bindings.txt for details.
 - operating-points-v2: See ../bindings/opp/opp.txt for details.
-- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details.
+- #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details.
 
 For each opp entry in 'operating-points-v2' table:
 - opp-supported-hw: Two bitfields indicating:

Documentation/devicetree/bindings/hwmon/gpio-fan.txt

@@ -12,7 +12,8 @@ Optional properties:
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
 - #cooling-cells: If used as a cooling device, must be <2>
-  Also see: Documentation/devicetree/bindings/thermal/thermal.txt
+  Also see:
+  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
   min and max states are derived from the speed-map of the fan.
 
 Note: At least one the "gpios" or "alarm-gpios" properties must be set.

Documentation/devicetree/bindings/hwmon/lm90.txt

@@ -34,8 +34,8 @@ Optional properties:
               LM90 "-ALERT" pin output.
               See interrupt-controller/interrupts.txt for the format.
 
-- #thermal-sensor-cells: should be set to 1. See thermal/thermal.txt for
-	      details. See <include/dt-bindings/thermal/lm90.h> for the
+- #thermal-sensor-cells: should be set to 1. See thermal/thermal-sensor.yaml
+	      for details. See <include/dt-bindings/thermal/lm90.h> for the
 	      definition of the local, remote and 2nd remote sensor index
 	      constants.
 

Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml

@@ -50,7 +50,7 @@ properties:
   nvmem-cell-names:
     const: calibration
 
-  # See ./thermal.txt for details
+  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
       - 0

Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt

@@ -6,7 +6,7 @@ transaction.
 Required properties:
 - compatible: "amazon,al-thermal".
 - reg: The physical base address and length of the sensor's registers.
-- #thermal-sensor-cells: Must be 1. See ./thermal.txt for a description.
+- #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Example:
 	thermal: thermal {

Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml

@@ -23,7 +23,7 @@ properties:
   compatible:
     const: brcm,bcm2711-thermal
 
-  # See ./thermal.txt for details
+  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     const: 0
 

Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt

@@ -7,7 +7,7 @@ compatible: 		should be one of: "brcm,bcm2835-thermal",
 			"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
 reg:			Address range of the thermal registers.
 clocks: 		Phandle of the clock used by the thermal sensor.
-#thermal-sensor-cells:	should be 0 (see thermal.txt)
+#thermal-sensor-cells:	should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
 
 Example:
 

Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt

@@ -9,7 +9,7 @@
   by /SOCTHERM/tsensor.
 - clock-names: Input clock name, should be 'thermal_clk'.
 - clocks: phandles for clock specified in "clock-names" property.
-- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description.
+- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Example :
 

Documentation/devicetree/bindings/thermal/max77620_thermal.txt

@@ -8,12 +8,12 @@ below threshold level.
 
 Required properties:
 -------------------
-#thermal-sensor-cells:	Please refer <devicetree/bindings/thermal/thermal.txt>
-			for more details.
+#thermal-sensor-cells:	For more details, please refer to
+			<devicetree/bindings/thermal/thermal-sensor.yaml>
 			The value must be 0.
 
 For more details, please refer generic thermal DT binding document
-<devicetree/bindings/thermal/thermal.txt>.
+<devicetree/bindings/thermal/thermal*.yaml>.
 
 Please refer <devicetree/bindings/mfd/max77620.txt> for mfd DT binding
 document for the MAX77620.

Documentation/devicetree/bindings/thermal/mediatek-thermal.txt

@@ -23,7 +23,7 @@ Required properties:
 - resets: Reference to the reset controller controlling the thermal controller.
 - mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
 - mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
-- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description.
+- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Optional properties:
 - nvmem-cells: A phandle to the calibration data provided by a nvmem device. If

Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt

@@ -28,9 +28,10 @@ Required properties :
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
   - soctherm
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
-    of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
-    list of valid values when referring to thermal sensors.
+- #thermal-sensor-cells : Should be 1. For a description of this property, see
+     Documentation/devicetree/bindings/thermal/thermal-sensor.yaml.
+    See <dt-bindings/thermal/tegra124-soctherm.h> for a list of valid values
+    when referring to thermal sensors.
 - throttle-cfgs: A sub-node which is a container of configuration for each
     hardware throttle events. These events can be set as cooling devices.
   * throttle events: Sub-nodes must be named as "light" or "heavy".
@@ -62,7 +63,8 @@ Required properties :
         TEGRA_SOCTHERM_THROT_LEVEL_MED (75%),
         TEGRA_SOCTHERM_THROT_LEVEL_HIGH (85%).
       - #cooling-cells: Should be 1. This cooling device only support on/off state.
-        See ./thermal.txt for a description of this property.
+        For a description of this property see:
+	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
 
       Optional properties: The following properties are T210 specific and
       valid only for OCx throttle events.

Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt

@@ -8,7 +8,7 @@ exposed by BPMP.
 The BPMP thermal node must be located directly inside the main BPMP node. See
 ../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
 
-This node represents a thermal sensor. See thermal.txt for details of the
+This node represents a thermal sensor. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details of the
 core thermal binding.
 
 Required properties:

Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt

@@ -8,7 +8,7 @@ Required properties:
 - compatible:      Should contain "qcom,spmi-temp-alarm".
 - reg:             Specifies the SPMI address.
 - interrupts:      PMIC temperature alarm interrupt.
-- #thermal-sensor-cells: Should be 0. See thermal.txt for a description.
+- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Optional properties:
 - io-channels:     Should contain IIO channel specifier for the ADC channel,

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

@@ -23,6 +23,7 @@ properties:
         items:
           - enum:
               - qcom,msm8916-tsens
+              - qcom,msm8939-tsens
               - qcom,msm8974-tsens
           - const: qcom,tsens-v0_1
 

Documentation/devicetree/bindings/thermal/rockchip-thermal.txt

@@ -24,7 +24,7 @@ Required properties:
 - pinctrl-1 : The "default" pinctrl state, it will be set after reset the
 	      TSADC controller.
 - pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend.
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- #thermal-sensor-cells : Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
 
 Optional properties:
 - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.

Documentation/devicetree/bindings/thermal/tango-thermal.txt

@@ -4,7 +4,7 @@ The SMP8758 SoC includes 3 instances of this temperature sensor
 (in the CPU, video decoder, and PCIe controller).
 
 Required properties:
-- #thermal-sensor-cells: Should be 0 (see thermal.txt)
+- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
 - compatible: "sigma,smp8758-thermal"
 - reg: Address range of the thermal registers
 

Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt

@@ -8,7 +8,7 @@ temperature using voltage-temperature lookup table.
 Required properties:
 ===================
 - compatible:		     Must be "generic-adc-thermal".
-- #thermal-sensor-cells:     Should be 1. See ./thermal.txt for a description
+- #thermal-sensor-cells:     Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description
 		             of this property.
 Optional properties:
 ===================

MAINTAINERS

@@ -17086,6 +17086,14 @@ F:	drivers/thermal/cpufreq_cooling.c
 F:	drivers/thermal/cpuidle_cooling.c
 F:	include/linux/cpu_cooling.h
 
+THERMAL/POWER_ALLOCATOR
+M:	Lukasz Luba <lukasz.luba@arm.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/driver-api/thermal/power_allocator.rst
+F:	drivers/thermal/gov_power_allocator.c
+F:	include/trace/events/thermal_power_allocator.h
+
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net

drivers/acpi/thermal.c

@@ -172,7 +172,6 @@ struct acpi_thermal {
 	struct acpi_thermal_trips trips;
 	struct acpi_handle_list devices;
 	struct thermal_zone_device *thermal_zone;
-	int tz_enabled;
 	int kelvin_offset;	/* in millidegrees */
 	struct work_struct thermal_check_work;
 };
@@ -500,9 +499,6 @@ static void acpi_thermal_check(void *data)
 {
 	struct acpi_thermal *tz = data;
 
-	if (!tz->tz_enabled)
-		return;
-
 	thermal_zone_device_update(tz->thermal_zone,
 				   THERMAL_EVENT_UNSPECIFIED);
 }
@@ -526,50 +522,6 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
 	return 0;
 }
 
-static int thermal_get_mode(struct thermal_zone_device *thermal,
-				enum thermal_device_mode *mode)
-{
-	struct acpi_thermal *tz = thermal->devdata;
-
-	if (!tz)
-		return -EINVAL;
-
-	*mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
-		THERMAL_DEVICE_DISABLED;
-
-	return 0;
-}
-
-static int thermal_set_mode(struct thermal_zone_device *thermal,
-				enum thermal_device_mode mode)
-{
-	struct acpi_thermal *tz = thermal->devdata;
-	int enable;
-
-	if (!tz)
-		return -EINVAL;
-
-	/*
-	 * enable/disable thermal management from ACPI thermal driver
-	 */
-	if (mode == THERMAL_DEVICE_ENABLED)
-		enable = 1;
-	else if (mode == THERMAL_DEVICE_DISABLED) {
-		enable = 0;
-		pr_warn("thermal zone will be disabled\n");
-	} else
-		return -EINVAL;
-
-	if (enable != tz->tz_enabled) {
-		tz->tz_enabled = enable;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			"%s kernel ACPI thermal control\n",
-			tz->tz_enabled ? "Enable" : "Disable"));
-		acpi_thermal_check(tz);
-	}
-	return 0;
-}
-
 static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 				 int trip, enum thermal_trip_type *type)
 {
@@ -856,8 +808,6 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
 	.bind = acpi_thermal_bind_cooling_device,
 	.unbind	= acpi_thermal_unbind_cooling_device,
 	.get_temp = thermal_get_temp,
-	.get_mode = thermal_get_mode,
-	.set_mode = thermal_set_mode,
 	.get_trip_type = thermal_get_trip_type,
 	.get_trip_temp = thermal_get_trip_temp,
 	.get_crit_temp = thermal_get_crit_temp,
@@ -901,23 +851,39 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 	result = sysfs_create_link(&tz->device->dev.kobj,
 				   &tz->thermal_zone->device.kobj, "thermal_zone");
 	if (result)
-		return result;
+		goto unregister_tzd;
 
 	result = sysfs_create_link(&tz->thermal_zone->device.kobj,
 				   &tz->device->dev.kobj, "device");
 	if (result)
-		return result;
+		goto remove_tz_link;
 
 	status =  acpi_bus_attach_private_data(tz->device->handle,
 					       tz->thermal_zone);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
+	if (ACPI_FAILURE(status)) {
+		result = -ENODEV;
+		goto remove_dev_link;
+	}
 
-	tz->tz_enabled = 1;
+	result = thermal_zone_device_enable(tz->thermal_zone);
+	if (result)
+		goto acpi_bus_detach;
 
 	dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
 		 tz->thermal_zone->id);
+
 	return 0;
+
+acpi_bus_detach:
+	acpi_bus_detach_private_data(tz->device->handle);
+remove_dev_link:
+	sysfs_remove_link(&tz->thermal_zone->device.kobj, "device");
+remove_tz_link:
+	sysfs_remove_link(&tz->device->dev.kobj, "thermal_zone");
+unregister_tzd:
+	thermal_zone_device_unregister(tz->thermal_zone);
+
+	return result;
 }
 
 static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz)

drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c

@@ -92,6 +92,14 @@ int cxgb4_thermal_init(struct adapter *adap)
 		ch_thermal->tzdev = NULL;
 		return ret;
 	}
+
+	ret = thermal_zone_device_enable(ch_thermal->tzdev);
+	if (ret) {
+		dev_err(adap->pdev_dev, "Failed to enable thermal zone\n");
+		thermal_zone_device_unregister(adap->ch_thermal.tzdev);
+		return ret;
+	}
+
 	return 0;
 }
 

drivers/net/ethernet/mellanox/mlxsw/core_thermal.c

@@ -98,7 +98,6 @@ struct mlxsw_thermal_module {
 	struct mlxsw_thermal *parent;
 	struct thermal_zone_device *tzdev;
 	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
-	enum thermal_device_mode mode;
 	int module; /* Module or gearbox number */
 };
 
@@ -110,7 +109,6 @@ struct mlxsw_thermal {
 	struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
 	u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1];
 	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
-	enum thermal_device_mode mode;
 	struct mlxsw_thermal_module *tz_module_arr;
 	u8 tz_module_num;
 	struct mlxsw_thermal_module *tz_gearbox_arr;
@@ -277,36 +275,6 @@ static int mlxsw_thermal_unbind(struct thermal_zone_device *tzdev,
 	return 0;
 }
 
-static int mlxsw_thermal_get_mode(struct thermal_zone_device *tzdev,
-				  enum thermal_device_mode *mode)
-{
-	struct mlxsw_thermal *thermal = tzdev->devdata;
-
-	*mode = thermal->mode;
-
-	return 0;
-}
-
-static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
-				  enum thermal_device_mode mode)
-{
-	struct mlxsw_thermal *thermal = tzdev->devdata;
-
-	mutex_lock(&tzdev->lock);
-
-	if (mode == THERMAL_DEVICE_ENABLED)
-		tzdev->polling_delay = thermal->polling_delay;
-	else
-		tzdev->polling_delay = 0;
-
-	mutex_unlock(&tzdev->lock);
-
-	thermal->mode = mode;
-	thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
-
-	return 0;
-}
-
 static int mlxsw_thermal_get_temp(struct thermal_zone_device *tzdev,
 				  int *p_temp)
 {
@@ -406,8 +374,6 @@ static int mlxsw_thermal_trend_get(struct thermal_zone_device *tzdev,
 static struct thermal_zone_device_ops mlxsw_thermal_ops = {
 	.bind = mlxsw_thermal_bind,
 	.unbind = mlxsw_thermal_unbind,
-	.get_mode = mlxsw_thermal_get_mode,
-	.set_mode = mlxsw_thermal_set_mode,
 	.get_temp = mlxsw_thermal_get_temp,
 	.get_trip_type	= mlxsw_thermal_get_trip_type,
 	.get_trip_temp	= mlxsw_thermal_get_trip_temp,
@@ -465,37 +431,6 @@ static int mlxsw_thermal_module_unbind(struct thermal_zone_device *tzdev,
 	return err;
 }
 
-static int mlxsw_thermal_module_mode_get(struct thermal_zone_device *tzdev,
-					 enum thermal_device_mode *mode)
-{
-	struct mlxsw_thermal_module *tz = tzdev->devdata;
-
-	*mode = tz->mode;
-
-	return 0;
-}
-
-static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev,
-					 enum thermal_device_mode mode)
-{
-	struct mlxsw_thermal_module *tz = tzdev->devdata;
-	struct mlxsw_thermal *thermal = tz->parent;
-
-	mutex_lock(&tzdev->lock);
-
-	if (mode == THERMAL_DEVICE_ENABLED)
-		tzdev->polling_delay = thermal->polling_delay;
-	else
-		tzdev->polling_delay = 0;
-
-	mutex_unlock(&tzdev->lock);
-
-	tz->mode = mode;
-	thermal_zone_device_update(tzdev, THERMAL_EVENT_UNSPECIFIED);
-
-	return 0;
-}
-
 static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,
 					 int *p_temp)
 {
@@ -611,8 +546,6 @@ static int mlxsw_thermal_module_trend_get(struct thermal_zone_device *tzdev,
 static struct thermal_zone_device_ops mlxsw_thermal_module_ops = {
 	.bind		= mlxsw_thermal_module_bind,
 	.unbind		= mlxsw_thermal_module_unbind,
-	.get_mode	= mlxsw_thermal_module_mode_get,
-	.set_mode	= mlxsw_thermal_module_mode_set,
 	.get_temp	= mlxsw_thermal_module_temp_get,
 	.get_trip_type	= mlxsw_thermal_module_trip_type_get,
 	.get_trip_temp	= mlxsw_thermal_module_trip_temp_get,
@@ -650,8 +583,6 @@ static int mlxsw_thermal_gearbox_temp_get(struct thermal_zone_device *tzdev,
 static struct thermal_zone_device_ops mlxsw_thermal_gearbox_ops = {
 	.bind		= mlxsw_thermal_module_bind,
 	.unbind		= mlxsw_thermal_module_unbind,
-	.get_mode	= mlxsw_thermal_module_mode_get,
-	.set_mode	= mlxsw_thermal_module_mode_set,
 	.get_temp	= mlxsw_thermal_gearbox_temp_get,
 	.get_trip_type	= mlxsw_thermal_module_trip_type_get,
 	.get_trip_temp	= mlxsw_thermal_module_trip_temp_get,
@@ -780,8 +711,11 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz)
 		return err;
 	}
 
-	module_tz->mode = THERMAL_DEVICE_ENABLED;
-	return 0;
+	err = thermal_zone_device_enable(module_tz->tzdev);
+	if (err)
+		thermal_zone_device_unregister(module_tz->tzdev);
+
+	return err;
 }
 
 static void mlxsw_thermal_module_tz_fini(struct thermal_zone_device *tzdev)
@@ -884,6 +818,7 @@ static int
 mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz)
 {
 	char tz_name[MLXSW_THERMAL_ZONE_MAX_NAME];
+	int ret;
 
 	snprintf(tz_name, sizeof(tz_name), "mlxsw-gearbox%d",
 		 gearbox_tz->module + 1);
@@ -896,8 +831,11 @@ mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz)
 	if (IS_ERR(gearbox_tz->tzdev))
 		return PTR_ERR(gearbox_tz->tzdev);
 
-	gearbox_tz->mode = THERMAL_DEVICE_ENABLED;
-	return 0;
+	ret = thermal_zone_device_enable(gearbox_tz->tzdev);
+	if (ret)
+		thermal_zone_device_unregister(gearbox_tz->tzdev);
+
+	return ret;
 }
 
 static void
@@ -1065,10 +1003,15 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
 	if (err)
 		goto err_unreg_modules_tzdev;
 
-	thermal->mode = THERMAL_DEVICE_ENABLED;
+	err = thermal_zone_device_enable(thermal->tzdev);
+	if (err)
+		goto err_unreg_gearboxes;
+
 	*p_thermal = thermal;
 	return 0;
 
+err_unreg_gearboxes:
+	mlxsw_thermal_gearboxes_fini(thermal);
 err_unreg_modules_tzdev:
 	mlxsw_thermal_modules_fini(thermal);
 err_unreg_tzdev:

drivers/net/wireless/intel/iwlwifi/mvm/tt.c

@@ -733,7 +733,7 @@ static  struct thermal_zone_device_ops tzone_ops = {
 
 static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm)
 {
-	int i;
+	int i, ret;
 	char name[16];
 	static atomic_t counter = ATOMIC_INIT(0);
 
@@ -759,6 +759,13 @@ static void iwl_mvm_thermal_zone_register(struct iwl_mvm *mvm)
 		return;
 	}
 
+	ret = thermal_zone_device_enable(mvm->tz_device.tzone);
+	if (ret) {
+		IWL_DEBUG_TEMP(mvm, "Failed to enable thermal zone\n");
+		thermal_zone_device_unregister(mvm->tz_device.tzone);
+		return;
+	}
+
 	/* 0 is a valid temperature,
 	 * so initialize the array with S16_MIN which invalid temperature
 	 */

drivers/platform/x86/acerhdf.c

@@ -397,39 +397,24 @@ static inline void acerhdf_revert_to_bios_mode(void)
 {
 	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
 	kernelmode = 0;
-	if (thz_dev)
-		thz_dev->polling_delay = 0;
+
 	pr_notice("kernel mode fan control OFF\n");
 }
 static inline void acerhdf_enable_kernelmode(void)
 {
 	kernelmode = 1;
 
-	thz_dev->polling_delay = interval*1000;
-	thermal_zone_device_update(thz_dev, THERMAL_EVENT_UNSPECIFIED);
 	pr_notice("kernel mode fan control ON\n");
 }
 
-static int acerhdf_get_mode(struct thermal_zone_device *thermal,
-			    enum thermal_device_mode *mode)
-{
-	if (verbose)
-		pr_notice("kernel mode fan control %d\n", kernelmode);
-
-	*mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
-			     : THERMAL_DEVICE_DISABLED;
-
-	return 0;
-}
-
 /*
  * set operation mode;
  * enabled: the thermal layer of the kernel takes care about
  *          the temperature and the fan.
  * disabled: the BIOS takes control of the fan.
  */
-static int acerhdf_set_mode(struct thermal_zone_device *thermal,
-			    enum thermal_device_mode mode)
+static int acerhdf_change_mode(struct thermal_zone_device *thermal,
+			       enum thermal_device_mode mode)
 {
 	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
 		acerhdf_revert_to_bios_mode();
@@ -488,8 +473,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
 	.bind = acerhdf_bind,
 	.unbind = acerhdf_unbind,
 	.get_temp = acerhdf_get_ec_temp,
-	.get_mode = acerhdf_get_mode,
-	.set_mode = acerhdf_set_mode,
+	.change_mode = acerhdf_change_mode,
 	.get_trip_type = acerhdf_get_trip_type,
 	.get_trip_hyst = acerhdf_get_trip_hyst,
 	.get_trip_temp = acerhdf_get_trip_temp,
@@ -733,6 +717,8 @@ static void acerhdf_unregister_platform(void)
 
 static int __init acerhdf_register_thermal(void)
 {
+	int ret;
+
 	cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
 						 &acerhdf_cooling_ops);
 
@@ -746,6 +732,13 @@ static int __init acerhdf_register_thermal(void)
 	if (IS_ERR(thz_dev))
 		return -EINVAL;
 
+	if (kernelmode)
+		ret = thermal_zone_device_enable(thz_dev);
+	else
+		ret = thermal_zone_device_disable(thz_dev);
+	if (ret)
+		return ret;
+
 	if (strcmp(thz_dev->governor->name,
 				acerhdf_zone_params.governor_name)) {
 		pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n",

drivers/platform/x86/intel_mid_thermal.c

@@ -493,6 +493,12 @@ static int mid_thermal_probe(struct platform_device *pdev)
 			ret = PTR_ERR(pinfo->tzd[i]);
 			goto err;
 		}
+		ret = thermal_zone_device_enable(pinfo->tzd[i]);
+		if (ret) {
+			kfree(td_info);
+			thermal_zone_device_unregister(pinfo->tzd[i]);
+			goto err;
+		}
 	}
 
 	pinfo->pdev = pdev;

drivers/power/supply/power_supply_core.c

@@ -939,7 +939,7 @@ static struct thermal_zone_device_ops psy_tzd_ops = {
 
 static int psy_register_thermal(struct power_supply *psy)
 {
-	int i;
+	int i, ret;
 
 	if (psy->desc->no_thermal)
 		return 0;
@@ -949,7 +949,12 @@ static int psy_register_thermal(struct power_supply *psy)
 		if (psy->desc->properties[i] == POWER_SUPPLY_PROP_TEMP) {
 			psy->tzd = thermal_zone_device_register(psy->desc->name,
 					0, 0, psy, &psy_tzd_ops, NULL, 0, 0);
-			return PTR_ERR_OR_ZERO(psy->tzd);
+			if (IS_ERR(psy->tzd))
+				return PTR_ERR(psy->tzd);
+			ret = thermal_zone_device_enable(psy->tzd);
+			if (ret)
+				thermal_zone_device_unregister(psy->tzd);
+			return ret;
 		}
 	}
 	return 0;

drivers/thermal/Kconfig

@@ -17,6 +17,16 @@ menuconfig THERMAL
 
 if THERMAL
 
+config THERMAL_NETLINK
+	bool "Thermal netlink management"
+	depends on NET
+	default y
+	help
+	  The thermal framework has a netlink interface to do thermal
+	  zones discovery, temperature readings and events such as
+	  trip point crossed, cooling device update or governor
+	  change. It is recommended to enable the feature.
+
 config THERMAL_STATISTICS
 	bool "Thermal state transition statistics"
 	help
@@ -180,16 +190,6 @@ config CPU_IDLE_THERMAL
 	  idle cycle.
 endif
 
-config CLOCK_THERMAL
-	bool "Generic clock cooling support"
-	depends on COMMON_CLK
-	depends on PM_OPP
-	help
-	  This entry implements the generic clock cooling mechanism through
-	  frequency clipping. Typically used to cool off co-processors. The
-	  device that is configured to use this cooling mechanism will be
-	  controlled to reduce clock frequency whenever temperature is high.
-
 config DEVFREQ_THERMAL
 	bool "Generic device cooling support"
 	depends on PM_DEVFREQ

drivers/thermal/Makefile

@@ -7,6 +7,9 @@ obj-$(CONFIG_THERMAL)		+= thermal_sys.o
 thermal_sys-y			+= thermal_core.o thermal_sysfs.o \
 					thermal_helpers.o
 
+# netlink interface to manage the thermal framework
+thermal_sys-$(CONFIG_THERMAL_NETLINK)		+= thermal_netlink.o
+
 # interface to/from other layers providing sensors
 thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
 thermal_sys-$(CONFIG_THERMAL_OF)		+= thermal_of.o
@@ -22,9 +25,6 @@ thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR)	+= gov_power_allocator.o
 thermal_sys-$(CONFIG_CPU_FREQ_THERMAL)	+= cpufreq_cooling.o
 thermal_sys-$(CONFIG_CPU_IDLE_THERMAL)	+= cpuidle_cooling.o
 
-# clock cooling
-thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
-
 # devfreq cooling
 thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 

drivers/thermal/armada_thermal.c

@@ -874,6 +874,12 @@ static int armada_thermal_probe(struct platform_device *pdev)
 			return PTR_ERR(tz);
 		}
 
+		ret = thermal_zone_device_enable(tz);
+		if (ret) {
+			thermal_zone_device_unregister(tz);
+			return ret;
+		}
+
 		drvdata->type = LEGACY;
 		drvdata->data.tz = tz;
 		platform_set_drvdata(pdev, drvdata);

drivers/thermal/da9062-thermal.c

@@ -49,7 +49,6 @@ struct da9062_thermal {
 	struct da9062 *hw;
 	struct delayed_work work;
 	struct thermal_zone_device *zone;
-	enum thermal_device_mode mode;
 	struct mutex lock; /* protection for da9062_thermal temperature */
 	int temperature;
 	int irq;
@@ -121,14 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int da9062_thermal_get_mode(struct thermal_zone_device *z,
-				   enum thermal_device_mode *mode)
-{
-	struct da9062_thermal *thermal = z->devdata;
-	*mode = thermal->mode;
-	return 0;
-}
-
 static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
 					int trip,
 					enum thermal_trip_type *type)
@@ -181,7 +172,6 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z,
 
 static struct thermal_zone_device_ops da9062_thermal_ops = {
 	.get_temp	= da9062_thermal_get_temp,
-	.get_mode	= da9062_thermal_get_mode,
 	.get_trip_type	= da9062_thermal_get_trip_type,
 	.get_trip_temp	= da9062_thermal_get_trip_temp,
 };
@@ -233,7 +223,6 @@ static int da9062_thermal_probe(struct platform_device *pdev)
 
 	thermal->config = match->data;
 	thermal->hw = chip;
-	thermal->mode = THERMAL_DEVICE_ENABLED;
 	thermal->dev = &pdev->dev;
 
 	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
@@ -248,6 +237,11 @@ static int da9062_thermal_probe(struct platform_device *pdev)
 		ret = PTR_ERR(thermal->zone);
 		goto err;
 	}
+	ret = thermal_zone_device_enable(thermal->zone);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable thermal zone device\n");
+		goto err_zone;
+	}
 
 	dev_dbg(&pdev->dev,
 		"TJUNC temperature polling period set at %d ms\n",

drivers/thermal/devfreq_cooling.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * devfreq_cooling: Thermal cooling device implementation for devices using
  *                  devfreq
  *
  * Copyright (C) 2014-2015 ARM Limited
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * TODO:
  *    - If OPPs are added or removed after devfreq cooling has
  *      registered, the devfreq cooling won't react to it.

drivers/thermal/dove_thermal.c

@@ -153,6 +153,12 @@ static int dove_thermal_probe(struct platform_device *pdev)
 		return PTR_ERR(thermal);
 	}
 
+	ret = thermal_zone_device_enable(thermal);
+	if (ret) {
+		thermal_zone_device_unregister(thermal);
+		return ret;
+	}
+
 	platform_set_drvdata(pdev, thermal);
 
 	return 0;

drivers/thermal/gov_power_allocator.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * A power allocator to manage temperature
  *
  * Copyright (C) 2014 ARM Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #define pr_fmt(fmt) "Power allocator: " fmt

drivers/thermal/hisi_thermal.c

@@ -549,8 +549,10 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
 {
 	struct thermal_zone_device *tzd = sensor->tzd;
 
-	tzd->ops->set_mode(tzd,
-		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
 }
 
 static int hisi_thermal_probe(struct platform_device *pdev)

drivers/thermal/imx8mm_thermal.c

@@ -220,6 +220,7 @@ static const struct of_device_id imx8mm_tmu_table[] = {
 	{ .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, imx8mm_tmu_table);
 
 static struct platform_driver imx8mm_tmu = {
 	.driver = {

drivers/thermal/imx_thermal.c

@@ -197,7 +197,6 @@ struct imx_thermal_data {
 	struct cpufreq_policy *policy;
 	struct thermal_zone_device *tz;
 	struct thermal_cooling_device *cdev;
-	enum thermal_device_mode mode;
 	struct regmap *tempmon;
 	u32 c1, c2; /* See formula in imx_init_calib() */
 	int temp_passive;
@@ -253,10 +252,11 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	const struct thermal_soc_data *soc_data = data->socdata;
 	struct regmap *map = data->tempmon;
 	unsigned int n_meas;
-	bool wait;
+	bool wait, run_measurement;
 	u32 val;
 
-	if (data->mode == THERMAL_DEVICE_ENABLED) {
+	run_measurement = !data->irq_enabled;
+	if (!run_measurement) {
 		/* Check if a measurement is currently in progress */
 		regmap_read(map, soc_data->temp_data, &val);
 		wait = !(val & soc_data->temp_valid_mask);
@@ -283,7 +283,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	regmap_read(map, soc_data->temp_data, &val);
 
-	if (data->mode != THERMAL_DEVICE_ENABLED) {
+	if (run_measurement) {
 		regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
 			     soc_data->measure_temp_mask);
 		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -331,27 +331,14 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 	return 0;
 }
 
-static int imx_get_mode(struct thermal_zone_device *tz,
-			enum thermal_device_mode *mode)
-{
-	struct imx_thermal_data *data = tz->devdata;
-
-	*mode = data->mode;
-
-	return 0;
-}
-
-static int imx_set_mode(struct thermal_zone_device *tz,
-			enum thermal_device_mode mode)
+static int imx_change_mode(struct thermal_zone_device *tz,
+			   enum thermal_device_mode mode)
 {
 	struct imx_thermal_data *data = tz->devdata;
 	struct regmap *map = data->tempmon;
 	const struct thermal_soc_data *soc_data = data->socdata;
 
 	if (mode == THERMAL_DEVICE_ENABLED) {
-		tz->polling_delay = IMX_POLLING_DELAY;
-		tz->passive_delay = IMX_PASSIVE_DELAY;
-
 		regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
 			     soc_data->power_down_mask);
 		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -367,18 +354,12 @@ static int imx_set_mode(struct thermal_zone_device *tz,
 		regmap_write(map, soc_data->sensor_ctrl + REG_SET,
 			     soc_data->power_down_mask);
 
-		tz->polling_delay = 0;
-		tz->passive_delay = 0;
-
 		if (data->irq_enabled) {
 			disable_irq(data->irq);
 			data->irq_enabled = false;
 		}
 	}
 
-	data->mode = mode;
-	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
 	return 0;
 }
 
@@ -467,8 +448,7 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.bind = imx_bind,
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
-	.get_mode = imx_get_mode,
-	.set_mode = imx_set_mode,
+	.change_mode = imx_change_mode,
 	.get_trip_type = imx_get_trip_type,
 	.get_trip_temp = imx_get_trip_temp,
 	.get_crit_temp = imx_get_crit_temp,
@@ -832,7 +812,9 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		     data->socdata->measure_temp_mask);
 
 	data->irq_enabled = true;
-	data->mode = THERMAL_DEVICE_ENABLED;
+	ret = thermal_zone_device_enable(data->tz);
+	if (ret)
+		goto thermal_zone_unregister;
 
 	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
 			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
@@ -874,19 +856,18 @@ static int imx_thermal_remove(struct platform_device *pdev)
 static int __maybe_unused imx_thermal_suspend(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
-	struct regmap *map = data->tempmon;
+	int ret;
 
 	/*
 	 * Need to disable thermal sensor, otherwise, when thermal core
 	 * try to get temperature before thermal sensor resume, a wrong
 	 * temperature will be read as the thermal sensor is powered
-	 * down.
+	 * down. This is done in change_mode() operation called from
+	 * thermal_zone_device_disable()
 	 */
-	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
-		     data->socdata->measure_temp_mask);
-	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
-		     data->socdata->power_down_mask);
-	data->mode = THERMAL_DEVICE_DISABLED;
+	ret = thermal_zone_device_disable(data->tz);
+	if (ret)
+		return ret;
 	clk_disable_unprepare(data->thermal_clk);
 
 	return 0;
@@ -895,18 +876,15 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
 static int __maybe_unused imx_thermal_resume(struct device *dev)
 {
 	struct imx_thermal_data *data = dev_get_drvdata(dev);
-	struct regmap *map = data->tempmon;
 	int ret;
 
 	ret = clk_prepare_enable(data->thermal_clk);
 	if (ret)
 		return ret;
 	/* Enabled thermal sensor after resume */
-	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
-		     data->socdata->power_down_mask);
-	regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
-		     data->socdata->measure_temp_mask);
-	data->mode = THERMAL_DEVICE_ENABLED;
+	ret = thermal_zone_device_enable(data->tz);
+	if (ret)
+		return ret;
 
 	return 0;
 }

drivers/thermal/intel/int340x_thermal/int3400_thermal.c

@@ -48,7 +48,6 @@ struct int3400_thermal_priv {
 	struct acpi_device *adev;
 	struct platform_device *pdev;
 	struct thermal_zone_device *thermal;
-	int mode;
 	int art_count;
 	struct art *arts;
 	int trt_count;
@@ -383,42 +382,20 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static int int3400_thermal_get_mode(struct thermal_zone_device *thermal,
-				enum thermal_device_mode *mode)
+static int int3400_thermal_change_mode(struct thermal_zone_device *thermal,
+				       enum thermal_device_mode mode)
 {
 	struct int3400_thermal_priv *priv = thermal->devdata;
-
-	if (!priv)
-		return -EINVAL;
-
-	*mode = priv->mode;
-
-	return 0;
-}
-
-static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
-				enum thermal_device_mode mode)
-{
-	struct int3400_thermal_priv *priv = thermal->devdata;
-	bool enable;
 	int result = 0;
 
 	if (!priv)
 		return -EINVAL;
 
-	if (mode == THERMAL_DEVICE_ENABLED)
-		enable = true;
-	else if (mode == THERMAL_DEVICE_DISABLED)
-		enable = false;
-	else
-		return -EINVAL;
-
-	if (enable != priv->mode) {
-		priv->mode = enable;
+	if (mode != thermal->mode)
 		result = int3400_thermal_run_osc(priv->adev->handle,
-						 priv->current_uuid_index,
-						 enable);
-	}
+						priv->current_uuid_index,
+						mode == THERMAL_DEVICE_ENABLED);
+
 
 	evaluate_odvp(priv);
 
@@ -427,8 +404,7 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
 
 static struct thermal_zone_device_ops int3400_thermal_ops = {
 	.get_temp = int3400_thermal_get_temp,
-	.get_mode = int3400_thermal_get_mode,
-	.set_mode = int3400_thermal_set_mode,
+	.change_mode = int3400_thermal_change_mode,
 };
 
 static struct thermal_zone_params int3400_thermal_params = {

drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c

@@ -259,9 +259,14 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
 		ret = PTR_ERR(int34x_thermal_zone->zone);
 		goto err_thermal_zone;
 	}
+	ret = thermal_zone_device_enable(int34x_thermal_zone->zone);
+	if (ret)
+		goto err_enable;
 
 	return int34x_thermal_zone;
 
+err_enable:
+	thermal_zone_device_unregister(int34x_thermal_zone->zone);
 err_thermal_zone:
 	acpi_lpat_free_conversion_table(int34x_thermal_zone->lpat_table);
 	kfree(int34x_thermal_zone->aux_trips);

drivers/thermal/intel/int340x_thermal/processor_thermal_device.c

@@ -43,7 +43,7 @@
 #define PCI_DEVICE_ID_PROC_ICL_THERMAL	0x8a03
 
 /* JasperLake thermal reporting device */
-#define PCI_DEVICE_ID_PROC_JSL_THERMAL	0x4503
+#define PCI_DEVICE_ID_PROC_JSL_THERMAL	0x4E03
 
 /* TigerLake thermal reporting device */
 #define PCI_DEVICE_ID_PROC_TGL_THERMAL	0x9A03

drivers/thermal/intel/intel_pch_thermal.c

@@ -24,6 +24,7 @@
 #define PCH_THERMAL_DID_SKL_H	0xA131 /* Skylake PCH 100 series */
 #define PCH_THERMAL_DID_CNL	0x9Df9 /* CNL PCH */
 #define PCH_THERMAL_DID_CNL_H	0xA379 /* CNL-H PCH */
+#define PCH_THERMAL_DID_CNL_LP	0x02F9 /* CNL-LP PCH */
 #define PCH_THERMAL_DID_CML_H	0X06F9 /* CML-H PCH */
 
 /* Wildcat Point-LP  PCH Thermal registers */
@@ -352,9 +353,14 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev,
 		err = PTR_ERR(ptd->tzd);
 		goto error_cleanup;
 	}
+	err = thermal_zone_device_enable(ptd->tzd);
+	if (err)
+		goto err_unregister;
 
 	return 0;
 
+err_unregister:
+	thermal_zone_device_unregister(ptd->tzd);
 error_cleanup:
 	iounmap(ptd->hw_base);
 error_release:
@@ -405,6 +411,8 @@ static const struct pci_device_id intel_pch_thermal_id[] = {
 		.driver_data = board_cnl, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H),
 		.driver_data = board_cnl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_LP),
+		.driver_data = board_cnl, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H),
 		.driver_data = board_cml, },
 	{ 0, },

drivers/thermal/intel/intel_quark_dts_thermal.c

@@ -103,7 +103,6 @@ struct soc_sensor_entry {
 	bool locked;
 	u32 store_ptps;
 	u32 store_dts_enable;
-	enum thermal_device_mode mode;
 	struct thermal_zone_device *tzone;
 };
 
@@ -127,10 +126,8 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
 	if (ret)
 		return ret;
 
-	if (out & QRK_DTS_ENABLE_BIT) {
-		aux_entry->mode = THERMAL_DEVICE_ENABLED;
+	if (out & QRK_DTS_ENABLE_BIT)
 		return 0;
-	}
 
 	if (!aux_entry->locked) {
 		out |= QRK_DTS_ENABLE_BIT;
@@ -138,10 +135,7 @@ static int soc_dts_enable(struct thermal_zone_device *tzd)
 				     QRK_DTS_REG_OFFSET_ENABLE, out);
 		if (ret)
 			return ret;
-
-		aux_entry->mode = THERMAL_DEVICE_ENABLED;
 	} else {
-		aux_entry->mode = THERMAL_DEVICE_DISABLED;
 		pr_info("DTS is locked. Cannot enable DTS\n");
 		ret = -EPERM;
 	}
@@ -160,10 +154,8 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
 	if (ret)
 		return ret;
 
-	if (!(out & QRK_DTS_ENABLE_BIT)) {
-		aux_entry->mode = THERMAL_DEVICE_DISABLED;
+	if (!(out & QRK_DTS_ENABLE_BIT))
 		return 0;
-	}
 
 	if (!aux_entry->locked) {
 		out &= ~QRK_DTS_ENABLE_BIT;
@@ -172,10 +164,7 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
 
 		if (ret)
 			return ret;
-
-		aux_entry->mode = THERMAL_DEVICE_DISABLED;
 	} else {
-		aux_entry->mode = THERMAL_DEVICE_ENABLED;
 		pr_info("DTS is locked. Cannot disable DTS\n");
 		ret = -EPERM;
 	}
@@ -309,16 +298,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
 	return 0;
 }
 
-static int sys_get_mode(struct thermal_zone_device *tzd,
-				enum thermal_device_mode *mode)
-{
-	struct soc_sensor_entry *aux_entry = tzd->devdata;
-	*mode = aux_entry->mode;
-	return 0;
-}
-
-static int sys_set_mode(struct thermal_zone_device *tzd,
-				enum thermal_device_mode mode)
+static int sys_change_mode(struct thermal_zone_device *tzd,
+			   enum thermal_device_mode mode)
 {
 	int ret;
 
@@ -338,8 +319,7 @@ static struct thermal_zone_device_ops tzone_ops = {
 	.get_trip_type = sys_get_trip_type,
 	.set_trip_temp = sys_set_trip_temp,
 	.get_crit_temp = sys_get_crit_temp,
-	.get_mode = sys_get_mode,
-	.set_mode = sys_set_mode,
+	.change_mode = sys_change_mode,
 };
 
 static void free_soc_dts(struct soc_sensor_entry *aux_entry)
@@ -414,9 +394,7 @@ static struct soc_sensor_entry *alloc_soc_dts(void)
 		goto err_ret;
 	}
 
-	mutex_lock(&dts_update_mutex);
-	err = soc_dts_enable(aux_entry->tzone);
-	mutex_unlock(&dts_update_mutex);
+	err = thermal_zone_device_enable(aux_entry->tzone);
 	if (err)
 		goto err_aux_status;
 

drivers/thermal/intel/intel_soc_dts_iosf.c

@@ -329,6 +329,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
 		ret = PTR_ERR(dts->tzone);
 		goto err_ret;
 	}
+	ret = thermal_zone_device_enable(dts->tzone);
+	if (ret)
+		goto err_enable;
 
 	ret = soc_dts_enable(id);
 	if (ret)

drivers/thermal/intel/x86_pkg_temp_thermal.c

@@ -363,6 +363,12 @@ static int pkg_temp_thermal_device_add(unsigned int cpu)
 		kfree(zonedev);
 		return err;
 	}
+	err = thermal_zone_device_enable(zonedev->tzone);
+	if (err) {
+		thermal_zone_device_unregister(zonedev->tzone);
+		kfree(zonedev);
+		return err;
+	}
 	/* Store MSR value for package thermal interrupt, to restore at exit */
 	rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, zonedev->msr_pkg_therm_low,
 	      zonedev->msr_pkg_therm_high);

drivers/thermal/kirkwood_thermal.c

@@ -65,6 +65,7 @@ static int kirkwood_thermal_probe(struct platform_device *pdev)
 	struct thermal_zone_device *thermal = NULL;
 	struct kirkwood_thermal_priv *priv;
 	struct resource *res;
+	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -82,6 +83,12 @@ static int kirkwood_thermal_probe(struct platform_device *pdev)
 			"Failed to register thermal zone device\n");
 		return PTR_ERR(thermal);
 	}
+	ret = thermal_zone_device_enable(thermal);
+	if (ret) {
+		thermal_zone_device_unregister(thermal);
+		dev_err(&pdev->dev, "Failed to enable thermal zone device\n");
+		return ret;
+	}
 
 	platform_set_drvdata(pdev, thermal);
 

drivers/thermal/qcom/tsens-v0_1.c

@@ -48,6 +48,63 @@
 #define MSM8916_CAL_SEL_MASK	0xe0000000
 #define MSM8916_CAL_SEL_SHIFT	29
 
+/* eeprom layout data for 8939 */
+#define MSM8939_BASE0_MASK	0x000000ff
+#define MSM8939_BASE1_MASK	0xff000000
+#define MSM8939_BASE0_SHIFT	0
+#define MSM8939_BASE1_SHIFT	24
+
+#define MSM8939_S0_P1_MASK	0x000001f8
+#define MSM8939_S1_P1_MASK	0x001f8000
+#define MSM8939_S2_P1_MASK_0_4	0xf8000000
+#define MSM8939_S2_P1_MASK_5	0x00000001
+#define MSM8939_S3_P1_MASK	0x00001f80
+#define MSM8939_S4_P1_MASK	0x01f80000
+#define MSM8939_S5_P1_MASK	0x00003f00
+#define MSM8939_S6_P1_MASK	0x03f00000
+#define MSM8939_S7_P1_MASK	0x0000003f
+#define MSM8939_S8_P1_MASK	0x0003f000
+#define MSM8939_S9_P1_MASK	0x07e00000
+
+#define MSM8939_S0_P2_MASK	0x00007e00
+#define MSM8939_S1_P2_MASK	0x07e00000
+#define MSM8939_S2_P2_MASK	0x0000007e
+#define MSM8939_S3_P2_MASK	0x0007e000
+#define MSM8939_S4_P2_MASK	0x7e000000
+#define MSM8939_S5_P2_MASK	0x000fc000
+#define MSM8939_S6_P2_MASK	0xfc000000
+#define MSM8939_S7_P2_MASK	0x00000fc0
+#define MSM8939_S8_P2_MASK	0x00fc0000
+#define MSM8939_S9_P2_MASK_0_4	0xf8000000
+#define MSM8939_S9_P2_MASK_5	0x00002000
+
+#define MSM8939_S0_P1_SHIFT	3
+#define MSM8939_S1_P1_SHIFT	15
+#define MSM8939_S2_P1_SHIFT_0_4	27
+#define MSM8939_S2_P1_SHIFT_5	0
+#define MSM8939_S3_P1_SHIFT	7
+#define MSM8939_S4_P1_SHIFT	19
+#define MSM8939_S5_P1_SHIFT	8
+#define MSM8939_S6_P1_SHIFT	20
+#define MSM8939_S7_P1_SHIFT	0
+#define MSM8939_S8_P1_SHIFT	12
+#define MSM8939_S9_P1_SHIFT	21
+
+#define MSM8939_S0_P2_SHIFT	9
+#define MSM8939_S1_P2_SHIFT	21
+#define MSM8939_S2_P2_SHIFT	1
+#define MSM8939_S3_P2_SHIFT	13
+#define MSM8939_S4_P2_SHIFT	25
+#define MSM8939_S5_P2_SHIFT	14
+#define MSM8939_S6_P2_SHIFT	26
+#define MSM8939_S7_P2_SHIFT	6
+#define MSM8939_S8_P2_SHIFT	18
+#define MSM8939_S9_P2_SHIFT_0_4	27
+#define MSM8939_S9_P2_SHIFT_5	13
+
+#define MSM8939_CAL_SEL_MASK	0x7
+#define MSM8939_CAL_SEL_SHIFT	0
+
 /* eeprom layout data for 8974 */
 #define BASE1_MASK		0xff
 #define S0_P1_MASK		0x3f00
@@ -189,6 +246,76 @@ static int calibrate_8916(struct tsens_priv *priv)
 	return 0;
 }
 
+static int calibrate_8939(struct tsens_priv *priv)
+{
+	int base0 = 0, base1 = 0, i;
+	u32 p1[10], p2[10];
+	int mode = 0;
+	u32 *qfprom_cdata;
+	u32 cdata[6];
+
+	qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
+	if (IS_ERR(qfprom_cdata))
+		return PTR_ERR(qfprom_cdata);
+
+	/* Mapping between qfprom nvmem and calibration data */
+	cdata[0] = qfprom_cdata[12];
+	cdata[1] = qfprom_cdata[13];
+	cdata[2] = qfprom_cdata[0];
+	cdata[3] = qfprom_cdata[1];
+	cdata[4] = qfprom_cdata[22];
+	cdata[5] = qfprom_cdata[21];
+
+	mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
+	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
+
+	switch (mode) {
+	case TWO_PT_CALIB:
+		base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT;
+		p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT;
+		p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT;
+		p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT;
+		p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT;
+		p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT;
+		p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT;
+		p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
+		p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
+		p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
+		p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
+		p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5;
+		for (i = 0; i < priv->num_sensors; i++)
+			p2[i] = (base1 + p2[i]) << 2;
+		fallthrough;
+	case ONE_PT_CALIB2:
+		base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT;
+		p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT;
+		p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT;
+		p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4;
+		p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5;
+		p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT;
+		p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT;
+		p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT;
+		p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
+		p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
+		p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
+		p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
+		for (i = 0; i < priv->num_sensors; i++)
+			p1[i] = ((base0) + p1[i]) << 2;
+		break;
+	default:
+		for (i = 0; i < priv->num_sensors; i++) {
+			p1[i] = 500;
+			p2[i] = 780;
+		}
+		break;
+	}
+
+	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+
+	return 0;
+}
+
 static int calibrate_8974(struct tsens_priv *priv)
 {
 	int base1 = 0, base2 = 0, i;
@@ -325,7 +452,7 @@ static int calibrate_8974(struct tsens_priv *priv)
 	return 0;
 }
 
-/* v0.1: 8916, 8974 */
+/* v0.1: 8916, 8939, 8974 */
 
 static struct tsens_features tsens_v0_1_feat = {
 	.ver_major	= VER_0_1,
@@ -386,6 +513,21 @@ struct tsens_plat_data data_8916 = {
 	.fields	= tsens_v0_1_regfields,
 };
 
+static const struct tsens_ops ops_8939 = {
+	.init		= init_common,
+	.calibrate	= calibrate_8939,
+	.get_temp	= get_temp_common,
+};
+
+struct tsens_plat_data data_8939 = {
+	.num_sensors	= 10,
+	.ops		= &ops_8939,
+	.hw_ids		= (unsigned int []){ 0, 1, 2, 4, 5, 6, 7, 8, 9, 10 },
+
+	.feat		= &tsens_v0_1_feat,
+	.fields	= tsens_v0_1_regfields,
+};
+
 static const struct tsens_ops ops_8974 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8974,

drivers/thermal/qcom/tsens.c

@@ -897,6 +897,9 @@ static const struct of_device_id tsens_table[] = {
 	{
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
+	}, {
+		.compatible = "qcom,msm8939-tsens",
+		.data = &data_8939,
 	}, {
 		.compatible = "qcom,msm8974-tsens",
 		.data = &data_8974,

drivers/thermal/qcom/tsens.h

@@ -585,7 +585,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp);
 extern struct tsens_plat_data data_8960;
 
 /* TSENS v0.1 targets */
-extern struct tsens_plat_data data_8916, data_8974;
+extern struct tsens_plat_data data_8916, data_8939, data_8974;
 
 /* TSENS v1 targets */
 extern struct tsens_plat_data data_tsens_v1, data_8976;

drivers/thermal/rcar_gen3_thermal.c

@@ -63,7 +63,7 @@
 #define TSC_MAX_NUM	3
 
 /* default THCODE values if FUSEs are missing */
-static const int thcode[TSC_MAX_NUM][3] = {
+static const int thcodes[TSC_MAX_NUM][3] = {
 	{ 3397, 2800, 2221 },
 	{ 3393, 2795, 2216 },
 	{ 3389, 2805, 2237 },
@@ -172,7 +172,7 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
 	/* Read register and convert to mili Celsius */
 	reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
 
-	if (reg <= thcode[tsc->id][1])
+	if (reg <= thcodes[tsc->id][1])
 		val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1,
 				tsc->coef.a1);
 	else
@@ -314,6 +314,10 @@ static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
 		.compatible = "renesas,r8a774b1-thermal",
 		.data = &rcar_gen3_ths_tj_1,
 	},
+	{
+		.compatible = "renesas,r8a774e1-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
 	{
 		.compatible = "renesas,r8a7795-thermal",
 		.data = &rcar_gen3_ths_tj_1,
@@ -430,7 +434,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		priv->tscs[i] = tsc;
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcode[i],
+		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i],
 					     *rcar_gen3_ths_tj_1);
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,

drivers/thermal/rcar_thermal.c

@@ -550,12 +550,19 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			priv->zone = devm_thermal_zone_of_sensor_register(
 						dev, i, priv,
 						&rcar_thermal_zone_of_ops);
-		else
+		else {
 			priv->zone = thermal_zone_device_register(
 						"rcar_thermal",
 						1, 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,
 						idle);
+
+			ret = thermal_zone_device_enable(priv->zone);
+			if (ret) {
+				thermal_zone_device_unregister(priv->zone);
+				priv->zone = ERR_PTR(ret);
+			}
+		}
 		if (IS_ERR(priv->zone)) {
 			dev_err(dev, "can't register thermal zone\n");
 			ret = PTR_ERR(priv->zone);

drivers/thermal/rockchip_thermal.c

@@ -1068,8 +1068,10 @@ rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on)
 {
 	struct thermal_zone_device *tzd = sensor->tzd;
 
-	tzd->ops->set_mode(tzd,
-		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
 }
 
 static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)

drivers/thermal/spear_thermal.c

@@ -131,6 +131,11 @@ static int spear_thermal_probe(struct platform_device *pdev)
 		ret = PTR_ERR(spear_thermal);
 		goto disable_clk;
 	}
+	ret = thermal_zone_device_enable(spear_thermal);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable thermal zone\n");
+		goto unregister_tzd;
+	}
 
 	platform_set_drvdata(pdev, spear_thermal);
 
@@ -139,6 +144,8 @@ static int spear_thermal_probe(struct platform_device *pdev)
 
 	return 0;
 
+unregister_tzd:
+	thermal_zone_device_unregister(spear_thermal);
 disable_clk:
 	clk_disable(stdev->clk);
 

drivers/thermal/sprd_thermal.c

@@ -322,8 +322,10 @@ static void sprd_thm_toggle_sensor(struct sprd_thermal_sensor *sen, bool on)
 {
 	struct thermal_zone_device *tzd = sen->tzd;
 
-	tzd->ops->set_mode(tzd,
-		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+	if (on)
+		thermal_zone_device_enable(tzd);
+	else
+		thermal_zone_device_disable(tzd);
 }
 
 static int sprd_thm_probe(struct platform_device *pdev)

drivers/thermal/st/st_thermal.c

@@ -246,11 +246,16 @@ int st_thermal_register(struct platform_device *pdev,
 		ret = PTR_ERR(sensor->thermal_dev);
 		goto sensor_off;
 	}
+	ret = thermal_zone_device_enable(sensor->thermal_dev);
+	if (ret)
+		goto tzd_unregister;
 
 	platform_set_drvdata(pdev, sensor);
 
 	return 0;
 
+tzd_unregister:
+	thermal_zone_device_unregister(sensor->thermal_dev);
 sensor_off:
 	st_thermal_sensor_off(sensor);
 

drivers/thermal/thermal_core.c

@@ -215,6 +215,8 @@ int thermal_zone_device_set_policy(struct thermal_zone_device *tz,
 	mutex_unlock(&tz->lock);
 	mutex_unlock(&thermal_governor_lock);
 
+	thermal_notify_tz_gov_change(tz->id, policy);
+
 	return ret;
 }
 
@@ -301,13 +303,22 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
 		cancel_delayed_work(&tz->poll_queue);
 }
 
+static inline bool should_stop_polling(struct thermal_zone_device *tz)
+{
+	return !thermal_zone_device_is_enabled(tz);
+}
+
 static void monitor_thermal_zone(struct thermal_zone_device *tz)
 {
+	bool stop;
+
+	stop = should_stop_polling(tz);
+
 	mutex_lock(&tz->lock);
 
-	if (tz->passive)
+	if (!stop && tz->passive)
 		thermal_zone_device_set_polling(tz, tz->passive_delay);
-	else if (tz->polling_delay)
+	else if (!stop && tz->polling_delay)
 		thermal_zone_device_set_polling(tz, tz->polling_delay);
 	else
 		thermal_zone_device_set_polling(tz, 0);
@@ -406,12 +417,25 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
 static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 {
 	enum thermal_trip_type type;
+	int trip_temp, hyst = 0;
 
 	/* Ignore disabled trip points */
 	if (test_bit(trip, &tz->trips_disabled))
 		return;
 
+	tz->ops->get_trip_temp(tz, trip, &trip_temp);
 	tz->ops->get_trip_type(tz, trip, &type);
+	if (tz->ops->get_trip_hyst)
+		tz->ops->get_trip_hyst(tz, trip, &hyst);
+
+	if (tz->last_temperature != THERMAL_TEMP_INVALID) {
+		if (tz->last_temperature < trip_temp &&
+		    tz->temperature >= trip_temp)
+			thermal_notify_tz_trip_up(tz->id, trip);
+		if (tz->last_temperature >= trip_temp &&
+		    tz->temperature < (trip_temp - hyst))
+			thermal_notify_tz_trip_down(tz->id, trip);
+	}
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
 		handle_critical_trips(tz, trip, type);
@@ -443,6 +467,8 @@ static void update_temperature(struct thermal_zone_device *tz)
 	mutex_unlock(&tz->lock);
 
 	trace_thermal_temperature(tz);
+
+	thermal_genl_sampling_temp(tz->id, temp);
 }
 
 static void thermal_zone_device_init(struct thermal_zone_device *tz)
@@ -459,11 +485,71 @@ static void thermal_zone_device_reset(struct thermal_zone_device *tz)
 	thermal_zone_device_init(tz);
 }
 
+static int thermal_zone_device_set_mode(struct thermal_zone_device *tz,
+					enum thermal_device_mode mode)
+{
+	int ret = 0;
+
+	mutex_lock(&tz->lock);
+
+	/* do nothing if mode isn't changing */
+	if (mode == tz->mode) {
+		mutex_unlock(&tz->lock);
+
+		return ret;
+	}
+
+	if (tz->ops->change_mode)
+		ret = tz->ops->change_mode(tz, mode);
+
+	if (!ret)
+		tz->mode = mode;
+
+	mutex_unlock(&tz->lock);
+
+	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
+
+	if (mode == THERMAL_DEVICE_ENABLED)
+		thermal_notify_tz_enable(tz->id);
+	else
+		thermal_notify_tz_disable(tz->id);
+
+	return ret;
+}
+
+int thermal_zone_device_enable(struct thermal_zone_device *tz)
+{
+	return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_ENABLED);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_enable);
+
+int thermal_zone_device_disable(struct thermal_zone_device *tz)
+{
+	return thermal_zone_device_set_mode(tz, THERMAL_DEVICE_DISABLED);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_device_disable);
+
+int thermal_zone_device_is_enabled(struct thermal_zone_device *tz)
+{
+	enum thermal_device_mode mode;
+
+	mutex_lock(&tz->lock);
+
+	mode = tz->mode;
+
+	mutex_unlock(&tz->lock);
+
+	return mode == THERMAL_DEVICE_ENABLED;
+}
+
 void thermal_zone_device_update(struct thermal_zone_device *tz,
 				enum thermal_notify_event event)
 {
 	int count;
 
+	if (should_stop_polling(tz))
+		return;
+
 	if (atomic_read(&in_suspend))
 		return;
 
@@ -617,6 +703,73 @@ void thermal_zone_device_rebind_exception(struct thermal_zone_device *tz,
 	mutex_unlock(&thermal_list_lock);
 }
 
+int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
+			      void *data)
+{
+	struct thermal_governor *gov;
+	int ret = 0;
+
+	mutex_lock(&thermal_governor_lock);
+	list_for_each_entry(gov, &thermal_governor_list, governor_list) {
+		ret = cb(gov, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_governor_lock);
+
+	return ret;
+}
+
+int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
+					      void *), void *data)
+{
+	struct thermal_cooling_device *cdev;
+	int ret = 0;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(cdev, &thermal_cdev_list, node) {
+		ret = cb(cdev, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return ret;
+}
+
+int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
+			  void *data)
+{
+	struct thermal_zone_device *tz;
+	int ret = 0;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		ret = cb(tz, data);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return ret;
+}
+
+struct thermal_zone_device *thermal_zone_get_by_id(int id)
+{
+	struct thermal_zone_device *tz, *match = NULL;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(tz, &thermal_tz_list, node) {
+		if (tz->id == id) {
+			match = tz;
+			break;
+		}
+	}
+	mutex_unlock(&thermal_list_lock);
+
+	return match;
+}
+
 void thermal_zone_device_unbind_exception(struct thermal_zone_device *tz,
 					  const char *cdev_type, size_t size)
 {
@@ -1340,6 +1493,8 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	if (atomic_cmpxchg(&tz->need_update, 1, 0))
 		thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
 
+	thermal_notify_tz_create(tz->id, tz->type);
+
 	return tz;
 
 unregister:
@@ -1411,6 +1566,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 	ida_destroy(&tz->ida);
 	mutex_destroy(&tz->lock);
 	device_unregister(&tz->device);
+
+	thermal_notify_tz_delete(tz->id);
 }
 EXPORT_SYMBOL_GPL(thermal_zone_device_unregister);
 
@@ -1456,7 +1613,6 @@ static int thermal_pm_notify(struct notifier_block *nb,
 			     unsigned long mode, void *_unused)
 {
 	struct thermal_zone_device *tz;
-	enum thermal_device_mode tz_mode;
 
 	switch (mode) {
 	case PM_HIBERNATION_PREPARE:
@@ -1469,11 +1625,7 @@ static int thermal_pm_notify(struct notifier_block *nb,
 	case PM_POST_SUSPEND:
 		atomic_set(&in_suspend, 0);
 		list_for_each_entry(tz, &thermal_tz_list, node) {
-			tz_mode = THERMAL_DEVICE_ENABLED;
-			if (tz->ops->get_mode)
-				tz->ops->get_mode(tz, &tz_mode);
-
-			if (tz_mode == THERMAL_DEVICE_DISABLED)
+			if (!thermal_zone_device_is_enabled(tz))
 				continue;
 
 			thermal_zone_device_init(tz);
@@ -1495,6 +1647,10 @@ static int __init thermal_init(void)
 {
 	int result;
 
+	result = thermal_netlink_init();
+	if (result)
+		goto error;
+
 	mutex_init(&poweroff_lock);
 	result = thermal_register_governors();
 	if (result)
@@ -1527,4 +1683,4 @@ static int __init thermal_init(void)
 	mutex_destroy(&poweroff_lock);
 	return result;
 }
-core_initcall(thermal_init);
+postcore_initcall(thermal_init);

drivers/thermal/thermal_core.h

@@ -12,6 +12,8 @@
 #include <linux/device.h>
 #include <linux/thermal.h>
 
+#include "thermal_netlink.h"
+
 /* Default Thermal Governor */
 #if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
 #define DEFAULT_THERMAL_GOVERNOR       "step_wise"
@@ -41,6 +43,17 @@ extern struct thermal_governor *__governor_thermal_table_end[];
 	     __governor < __governor_thermal_table_end;	\
 	     __governor++)
 
+int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
+			  void *);
+
+int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
+					      void *), void *);
+
+int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
+			      void *thermal_governor);
+
+struct thermal_zone_device *thermal_zone_get_by_id(int id);
+
 struct thermal_attr {
 	struct device_attribute attr;
 	char name[THERMAL_NAME_LENGTH];
@@ -166,4 +179,6 @@ of_thermal_get_trip_points(struct thermal_zone_device *tz)
 }
 #endif
 
+int thermal_zone_device_is_enabled(struct thermal_zone_device *tz);
+
 #endif /* __THERMAL_CORE_H__ */

drivers/thermal/thermal_helpers.c

@@ -175,6 +175,16 @@ void thermal_zone_set_trips(struct thermal_zone_device *tz)
 	mutex_unlock(&tz->lock);
 }
 
+static void thermal_cdev_set_cur_state(struct thermal_cooling_device *cdev,
+				       int target)
+{
+	if (cdev->ops->set_cur_state(cdev, target))
+		return;
+
+	thermal_notify_cdev_state_update(cdev->id, target);
+	thermal_cooling_device_stats_update(cdev, target);
+}
+
 void thermal_cdev_update(struct thermal_cooling_device *cdev)
 {
 	struct thermal_instance *instance;
@@ -197,8 +207,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 			target = instance->target;
 	}
 
-	if (!cdev->ops->set_cur_state(cdev, target))
-		thermal_cooling_device_stats_update(cdev, target);
+	thermal_cdev_set_cur_state(cdev, target);
 
 	cdev->updated = true;
 	mutex_unlock(&cdev->lock);

drivers/thermal/thermal_netlink.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) Linaro Ltd 2020
+ *  Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+
+/* Netlink notification function */
+#ifdef CONFIG_THERMAL_NETLINK
+int __init thermal_netlink_init(void);
+int thermal_notify_tz_create(int tz_id, const char *name);
+int thermal_notify_tz_delete(int tz_id);
+int thermal_notify_tz_enable(int tz_id);
+int thermal_notify_tz_disable(int tz_id);
+int thermal_notify_tz_trip_down(int tz_id, int id);
+int thermal_notify_tz_trip_up(int tz_id, int id);
+int thermal_notify_tz_trip_delete(int tz_id, int id);
+int thermal_notify_tz_trip_add(int tz_id, int id, int type,
+			       int temp, int hyst);
+int thermal_notify_tz_trip_change(int tz_id, int id, int type,
+				  int temp, int hyst);
+int thermal_notify_cdev_state_update(int cdev_id, int state);
+int thermal_notify_cdev_add(int cdev_id, const char *name, int max_state);
+int thermal_notify_cdev_delete(int cdev_id);
+int thermal_notify_tz_gov_change(int tz_id, const char *name);
+int thermal_genl_sampling_temp(int id, int temp);
+#else
+static inline int thermal_netlink_init(void)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_create(int tz_id, const char *name)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_delete(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_enable(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_disable(int tz_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_down(int tz_id, int id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_up(int tz_id, int id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_delete(int tz_id, int id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_add(int tz_id, int id, int type,
+					     int temp, int hyst)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_trip_change(int tz_id, int id, int type,
+						int temp, int hyst)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_state_update(int cdev_id, int state)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_add(int cdev_id, const char *name,
+					  int max_state)
+{
+	return 0;
+}
+
+static inline int thermal_notify_cdev_delete(int cdev_id)
+{
+	return 0;
+}
+
+static inline int thermal_notify_tz_gov_change(int tz_id, const char *name)
+{
+	return 0;
+}
+
+static inline int thermal_genl_sampling_temp(int id, int temp)
+{
+	return 0;
+}
+#endif /* CONFIG_THERMAL_NETLINK */

drivers/thermal/thermal_of.c

@@ -51,7 +51,6 @@ struct __thermal_bind_params {
 
 /**
  * struct __thermal_zone - internal representation of a thermal zone
- * @mode: current thermal zone device mode (enabled/disabled)
  * @passive_delay: polling interval while passive cooling is activated
  * @polling_delay: zone polling interval
  * @slope: slope of the temperature adjustment curve
@@ -65,7 +64,6 @@ struct __thermal_bind_params {
  */
 
 struct __thermal_zone {
-	enum thermal_device_mode mode;
 	int passive_delay;
 	int polling_delay;
 	int slope;
@@ -269,39 +267,6 @@ static int of_thermal_unbind(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static int of_thermal_get_mode(struct thermal_zone_device *tz,
-			       enum thermal_device_mode *mode)
-{
-	struct __thermal_zone *data = tz->devdata;
-
-	*mode = data->mode;
-
-	return 0;
-}
-
-static int of_thermal_set_mode(struct thermal_zone_device *tz,
-			       enum thermal_device_mode mode)
-{
-	struct __thermal_zone *data = tz->devdata;
-
-	mutex_lock(&tz->lock);
-
-	if (mode == THERMAL_DEVICE_ENABLED) {
-		tz->polling_delay = data->polling_delay;
-		tz->passive_delay = data->passive_delay;
-	} else {
-		tz->polling_delay = 0;
-		tz->passive_delay = 0;
-	}
-
-	mutex_unlock(&tz->lock);
-
-	data->mode = mode;
-	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
-	return 0;
-}
-
 static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
 				    enum thermal_trip_type *type)
 {
@@ -393,9 +358,6 @@ static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
 }
 
 static struct thermal_zone_device_ops of_thermal_ops = {
-	.get_mode = of_thermal_get_mode,
-	.set_mode = of_thermal_set_mode,
-
 	.get_trip_type = of_thermal_get_trip_type,
 	.get_trip_temp = of_thermal_get_trip_temp,
 	.set_trip_temp = of_thermal_set_trip_temp,
@@ -554,7 +516,7 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data,
 			tzd = thermal_zone_of_add_sensor(child, sensor_np,
 							 data, ops);
 			if (!IS_ERR(tzd))
-				tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED);
+				thermal_zone_device_enable(tzd);
 
 			of_node_put(child);
 			goto exit;
@@ -979,7 +941,6 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
 
 finish:
 	of_node_put(child);
-	tz->mode = THERMAL_DEVICE_DISABLED;
 
 	return tz;
 

drivers/thermal/thermal_sysfs.c

@@ -49,18 +49,9 @@ static ssize_t
 mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	enum thermal_device_mode mode;
-	int result;
-
-	if (!tz->ops->get_mode)
-		return -EPERM;
+	int enabled = thermal_zone_device_is_enabled(tz);
 
-	result = tz->ops->get_mode(tz, &mode);
-	if (result)
-		return result;
-
-	return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
-		       : "disabled");
+	return sprintf(buf, "%s\n", enabled ? "enabled" : "disabled");
 }
 
 static ssize_t
@@ -70,13 +61,10 @@ mode_store(struct device *dev, struct device_attribute *attr,
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 	int result;
 
-	if (!tz->ops->set_mode)
-		return -EPERM;
-
 	if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
-		result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
+		result = thermal_zone_device_enable(tz);
 	else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
-		result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
+		result = thermal_zone_device_disable(tz);
 	else
 		result = -EINVAL;
 
@@ -124,7 +112,8 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
 	int trip, ret;
-	int temperature;
+	int temperature, hyst = 0;
+	enum thermal_trip_type type;
 
 	if (!tz->ops->set_trip_temp)
 		return -EPERM;
@@ -139,6 +128,18 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
 	if (ret)
 		return ret;
 
+	if (tz->ops->get_trip_hyst) {
+		ret = tz->ops->get_trip_hyst(tz, trip, &hyst);
+		if (ret)
+			return ret;
+	}
+
+	ret = tz->ops->get_trip_type(tz, trip, &type);
+	if (ret)
+		return ret;
+
+	thermal_notify_tz_trip_change(tz->id, trip, type, temperature, hyst);
+
 	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
 
 	return count;
@@ -428,30 +429,13 @@ static struct attribute_group thermal_zone_attribute_group = {
 	.attrs = thermal_zone_dev_attrs,
 };
 
-/* We expose mode only if .get_mode is present */
 static struct attribute *thermal_zone_mode_attrs[] = {
 	&dev_attr_mode.attr,
 	NULL,
 };
 
-static umode_t thermal_zone_mode_is_visible(struct kobject *kobj,
-					    struct attribute *attr,
-					    int attrno)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct thermal_zone_device *tz;
-
-	tz = container_of(dev, struct thermal_zone_device, device);
-
-	if (tz->ops->get_mode)
-		return attr->mode;
-
-	return 0;
-}
-
 static struct attribute_group thermal_zone_mode_attribute_group = {
 	.attrs = thermal_zone_mode_attrs,
-	.is_visible = thermal_zone_mode_is_visible,
 };
 
 /* We expose passive only if passive trips are present */

drivers/thermal/ti-soc-thermal/ti-thermal-common.c

@@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
-	if (!IS_ERR_OR_NULL(data))
+	if (IS_ERR_OR_NULL(data))
 		data = ti_thermal_build_data(bgp, id);
 
 	if (!data)

include/linux/clock_cooling.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  linux/include/linux/clock_cooling.h
- *
- *  Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com>
- *
- *  Copyright (C) 2013	Texas Instruments Inc.
- *  Contact:  Eduardo Valentin <eduardo.valentin@ti.com>
- *
- *  Highly based on cpufreq_cooling.c.
- *  Copyright (C) 2012	Samsung Electronics Co., Ltd(http://www.samsung.com)
- *  Copyright (C) 2012  Amit Daniel <amit.kachhap@linaro.org>
- */
-
-#ifndef __CPU_COOLING_H__
-#define __CPU_COOLING_H__
-
-#include <linux/of.h>
-#include <linux/thermal.h>
-#include <linux/cpumask.h>
-
-#ifdef CONFIG_CLOCK_THERMAL
-/**
- * clock_cooling_register - function to create clock cooling device.
- * @dev: struct device pointer to the device used as clock cooling device.
- * @clock_name: string containing the clock used as cooling mechanism.
- */
-struct thermal_cooling_device *
-clock_cooling_register(struct device *dev, const char *clock_name);
-
-/**
- * clock_cooling_unregister - function to remove clock cooling device.
- * @cdev: thermal cooling device pointer.
- */
-void clock_cooling_unregister(struct thermal_cooling_device *cdev);
-
-unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev,
-				      unsigned long freq);
-#else /* !CONFIG_CLOCK_THERMAL */
-static inline struct thermal_cooling_device *
-clock_cooling_register(struct device *dev, const char *clock_name)
-{
-	return NULL;
-}
-static inline
-void clock_cooling_unregister(struct thermal_cooling_device *cdev)
-{
-}
-static inline
-unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev,
-				      unsigned long freq)
-{
-	return THERMAL_CSTATE_INVALID;
-}
-#endif	/* CONFIG_CLOCK_THERMAL */
-
-#endif /* __CPU_COOLING_H__ */

include/linux/devfreq_cooling.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * devfreq_cooling: Thermal cooling device implementation for devices using
  *                  devfreq
  *
  * Copyright (C) 2014-2015 ARM Limited
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __DEVFREQ_COOLING_H__

include/linux/thermal.h

@@ -37,18 +37,6 @@ struct thermal_cooling_device;
 struct thermal_instance;
 struct thermal_attr;
 
-enum thermal_device_mode {
-	THERMAL_DEVICE_DISABLED = 0,
-	THERMAL_DEVICE_ENABLED,
-};
-
-enum thermal_trip_type {
-	THERMAL_TRIP_ACTIVE = 0,
-	THERMAL_TRIP_PASSIVE,
-	THERMAL_TRIP_HOT,
-	THERMAL_TRIP_CRITICAL,
-};
-
 enum thermal_trend {
 	THERMAL_TREND_STABLE, /* temperature is stable */
 	THERMAL_TREND_RAISING, /* temperature is raising */
@@ -76,9 +64,7 @@ struct thermal_zone_device_ops {
 		       struct thermal_cooling_device *);
 	int (*get_temp) (struct thermal_zone_device *, int *);
 	int (*set_trips) (struct thermal_zone_device *, int, int);
-	int (*get_mode) (struct thermal_zone_device *,
-			 enum thermal_device_mode *);
-	int (*set_mode) (struct thermal_zone_device *,
+	int (*change_mode) (struct thermal_zone_device *,
 		enum thermal_device_mode);
 	int (*get_trip_type) (struct thermal_zone_device *, int,
 		enum thermal_trip_type *);
@@ -128,6 +114,7 @@ struct thermal_cooling_device {
  * @trip_temp_attrs:	attributes for trip points for sysfs: trip temperature
  * @trip_type_attrs:	attributes for trip points for sysfs: trip type
  * @trip_hyst_attrs:	attributes for trip points for sysfs: trip hysteresis
+ * @mode:		current mode of this thermal zone
  * @devdata:	private pointer for device private data
  * @trips:	number of trip points the thermal zone supports
  * @trips_disabled;	bitmap for disabled trips
@@ -170,6 +157,7 @@ struct thermal_zone_device {
 	struct thermal_attr *trip_temp_attrs;
 	struct thermal_attr *trip_type_attrs;
 	struct thermal_attr *trip_hyst_attrs;
+	enum thermal_device_mode mode;
 	void *devdata;
 	int trips;
 	unsigned long trips_disabled;	/* bitmap for disabled trips */
@@ -303,11 +291,6 @@ struct thermal_zone_params {
 	int offset;
 };
 
-struct thermal_genl_event {
-	u32 orig;
-	enum events event;
-};
-
 /**
  * struct thermal_zone_of_device_ops - scallbacks for handling DT based zones
  *
@@ -416,6 +399,8 @@ int thermal_zone_get_offset(struct thermal_zone_device *tz);
 
 void thermal_cdev_update(struct thermal_cooling_device *);
 void thermal_notify_framework(struct thermal_zone_device *, int);
+int thermal_zone_device_enable(struct thermal_zone_device *tz);
+int thermal_zone_device_disable(struct thermal_zone_device *tz);
 #else
 static inline struct thermal_zone_device *thermal_zone_device_register(
 	const char *type, int trips, int mask, void *devdata,
@@ -463,6 +448,12 @@ static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
 static inline void thermal_notify_framework(struct thermal_zone_device *tz,
 	int trip)
 { }
+
+static inline int thermal_zone_device_enable(struct thermal_zone_device *tz)
+{ return -ENODEV; }
+
+static inline int thermal_zone_device_disable(struct thermal_zone_device *tz)
+{ return -ENODEV; }
 #endif /* CONFIG_THERMAL */
 
 #endif /* __THERMAL_H__ */

include/uapi/linux/thermal.h

@@ -4,31 +4,86 @@
 
 #define THERMAL_NAME_LENGTH	20
 
-/* Adding event notification support elements */
-#define THERMAL_GENL_FAMILY_NAME                "thermal_event"
-#define THERMAL_GENL_VERSION                    0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME           "thermal_mc_grp"
-
-/* Events supported by Thermal Netlink */
-enum events {
-	THERMAL_AUX0,
-	THERMAL_AUX1,
-	THERMAL_CRITICAL,
-	THERMAL_DEV_FAULT,
+enum thermal_device_mode {
+	THERMAL_DEVICE_DISABLED = 0,
+	THERMAL_DEVICE_ENABLED,
+};
+
+enum thermal_trip_type {
+	THERMAL_TRIP_ACTIVE = 0,
+	THERMAL_TRIP_PASSIVE,
+	THERMAL_TRIP_HOT,
+	THERMAL_TRIP_CRITICAL,
 };
 
-/* attributes of thermal_genl_family */
-enum {
+/* Adding event notification support elements */
+#define THERMAL_GENL_FAMILY_NAME		"thermal"
+#define THERMAL_GENL_VERSION			0x01
+#define THERMAL_GENL_SAMPLING_GROUP_NAME	"sampling"
+#define THERMAL_GENL_EVENT_GROUP_NAME		"event"
+
+/* Attributes of thermal_genl_family */
+enum thermal_genl_attr {
 	THERMAL_GENL_ATTR_UNSPEC,
-	THERMAL_GENL_ATTR_EVENT,
+	THERMAL_GENL_ATTR_TZ,
+	THERMAL_GENL_ATTR_TZ_ID,
+	THERMAL_GENL_ATTR_TZ_TEMP,
+	THERMAL_GENL_ATTR_TZ_TRIP,
+	THERMAL_GENL_ATTR_TZ_TRIP_ID,
+	THERMAL_GENL_ATTR_TZ_TRIP_TYPE,
+	THERMAL_GENL_ATTR_TZ_TRIP_TEMP,
+	THERMAL_GENL_ATTR_TZ_TRIP_HYST,
+	THERMAL_GENL_ATTR_TZ_MODE,
+	THERMAL_GENL_ATTR_TZ_NAME,
+	THERMAL_GENL_ATTR_TZ_CDEV_WEIGHT,
+	THERMAL_GENL_ATTR_TZ_GOV,
+	THERMAL_GENL_ATTR_TZ_GOV_NAME,
+	THERMAL_GENL_ATTR_CDEV,
+	THERMAL_GENL_ATTR_CDEV_ID,
+	THERMAL_GENL_ATTR_CDEV_CUR_STATE,
+	THERMAL_GENL_ATTR_CDEV_MAX_STATE,
+	THERMAL_GENL_ATTR_CDEV_NAME,
+	THERMAL_GENL_ATTR_GOV_NAME,
+
 	__THERMAL_GENL_ATTR_MAX,
 };
 #define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
 
-/* commands supported by the thermal_genl_family */
-enum {
+enum thermal_genl_sampling {
+	THERMAL_GENL_SAMPLING_TEMP,
+	__THERMAL_GENL_SAMPLING_MAX,
+};
+#define THERMAL_GENL_SAMPLING_MAX (__THERMAL_GENL_SAMPLING_MAX - 1)
+
+/* Events of thermal_genl_family */
+enum thermal_genl_event {
+	THERMAL_GENL_EVENT_UNSPEC,
+	THERMAL_GENL_EVENT_TZ_CREATE,		/* Thermal zone creation */
+	THERMAL_GENL_EVENT_TZ_DELETE,		/* Thermal zone deletion */
+	THERMAL_GENL_EVENT_TZ_DISABLE,		/* Thermal zone disabed */
+	THERMAL_GENL_EVENT_TZ_ENABLE,		/* Thermal zone enabled */
+	THERMAL_GENL_EVENT_TZ_TRIP_UP,		/* Trip point crossed the way up */
+	THERMAL_GENL_EVENT_TZ_TRIP_DOWN,	/* Trip point crossed the way down */
+	THERMAL_GENL_EVENT_TZ_TRIP_CHANGE,	/* Trip point changed */
+	THERMAL_GENL_EVENT_TZ_TRIP_ADD,		/* Trip point added */
+	THERMAL_GENL_EVENT_TZ_TRIP_DELETE,	/* Trip point deleted */
+	THERMAL_GENL_EVENT_CDEV_ADD,		/* Cdev bound to the thermal zone */
+	THERMAL_GENL_EVENT_CDEV_DELETE,		/* Cdev unbound */
+	THERMAL_GENL_EVENT_CDEV_STATE_UPDATE,	/* Cdev state updated */
+	THERMAL_GENL_EVENT_TZ_GOV_CHANGE,	/* Governor policy changed  */
+	__THERMAL_GENL_EVENT_MAX,
+};
+#define THERMAL_GENL_EVENT_MAX (__THERMAL_GENL_EVENT_MAX - 1)
+
+/* Commands supported by the thermal_genl_family */
+enum thermal_genl_cmd {
 	THERMAL_GENL_CMD_UNSPEC,
-	THERMAL_GENL_CMD_EVENT,
+	THERMAL_GENL_CMD_TZ_GET_ID,	/* List of thermal zones id */
+	THERMAL_GENL_CMD_TZ_GET_TRIP,	/* List of thermal trips */
+	THERMAL_GENL_CMD_TZ_GET_TEMP,	/* Get the thermal zone temperature */
+	THERMAL_GENL_CMD_TZ_GET_GOV,	/* Get the thermal zone governor */
+	THERMAL_GENL_CMD_TZ_GET_MODE,	/* Get the thermal zone mode */
+	THERMAL_GENL_CMD_CDEV_GET,	/* List of cdev id */
 	__THERMAL_GENL_CMD_MAX,
 };
 #define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)

net/netlink/genetlink.c

@@ -1192,7 +1192,7 @@ static int __init genl_init(void)
 	panic("GENL: Cannot register controller: %d\n", err);
 }
 
-subsys_initcall(genl_init);
+core_initcall(genl_init);
 
 static int genlmsg_mcast(struct sk_buff *skb, u32 portid, unsigned long group,
 			 gfp_t flags)