Commit 96fc294c authored by Hsin-Yu Chao's avatar Hsin-Yu Chao Committed by Mark Brown

ASoC: da7219: software reset codec at probe

Da7219 does not trigger interrupt to report jack status
when system boots from warm reset because its power
remains on during warm reset.
Doing software reset at probe to handle this.
Signed-off-by: default avatarHsin-Yu Chao <hychao@chromium.org>
Signed-off-by: default avatarXing Zheng <zhengxing@rock-chips.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 29b4817d
......@@ -1937,6 +1937,14 @@ static int da7219_i2c_probe(struct i2c_client *i2c,
return ret;
}
/* Software reset codec. */
regmap_write_bits(da7219->regmap, DA7219_ACCDET_CONFIG_1,
DA7219_ACCDET_EN_MASK, 0);
regmap_write_bits(da7219->regmap, DA7219_CIF_CTRL,
DA7219_CIF_REG_SOFT_RESET_MASK, 0);
regmap_write_bits(da7219->regmap, DA7219_SYSTEM_ACTIVE,
DA7219_SYSTEM_ACTIVE_MASK, 0);
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_da7219,
&da7219_dai, 1);
if (ret < 0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment