Skip to content

L
linux
Commit 970aa9e0 authored by Andrew Chew's avatar Andrew Chew Committed by Mauro Carvalho Chehab
Browse files
Options

[media] V4L: ov9740: Remove hardcoded resolution regs 

Derive resolution-dependent register settings programmatically.
Signed-off-by: default avatarAndrew Chew <achew@nvidia.com>
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent c4fdce56
Hide whitespace changes
Inline Side-by-side
Showing with 114 additions and 96 deletions
drivers/media/video/ov9740.c
View file @ 970aa9e0
......@@ -181,27 +181,8 @@
#define OV9740_MIPI_CTRL_3012 0x3012
#define OV9740_SC_CMMM_MIPI_CTR 0x3014
/* supported resolutions */
enum {
OV9740_VGA,
OV9740_720P,
};
struct ov9740_resolution {
unsigned int width;
unsigned int height;
};
static struct ov9740_resolution ov9740_resolutions[] = {
[OV9740_VGA] = {
.width = 640,
.height = 480,
},
[OV9740_720P] = {
.width = 1280,
.height = 720,
},
};
#define OV9740_MAX_WIDTH 1280
#define OV9740_MAX_HEIGHT 720
/* Misc. structures */
struct ov9740_reg {
......@@ -403,54 +384,6 @@ static const struct ov9740_reg ov9740_defaults[] = {
{ OV9740_ISP_CTRL19, 0x02 },
};
static const struct ov9740_reg ov9740_regs_vga[] = {
{ OV9740_X_ADDR_START_HI, 0x00 },
{ OV9740_X_ADDR_START_LO, 0xa0 },
{ OV9740_Y_ADDR_START_HI, 0x00 },
{ OV9740_Y_ADDR_START_LO, 0x00 },
{ OV9740_X_ADDR_END_HI, 0x04 },
{ OV9740_X_ADDR_END_LO, 0x63 },
{ OV9740_Y_ADDR_END_HI, 0x02 },
{ OV9740_Y_ADDR_END_LO, 0xd3 },
{ OV9740_X_OUTPUT_SIZE_HI, 0x02 },
{ OV9740_X_OUTPUT_SIZE_LO, 0x80 },
{ OV9740_Y_OUTPUT_SIZE_HI, 0x01 },
{ OV9740_Y_OUTPUT_SIZE_LO, 0xe0 },
{ OV9740_ISP_CTRL1E, 0x03 },
{ OV9740_ISP_CTRL1F, 0xc0 },
{ OV9740_ISP_CTRL20, 0x02 },
{ OV9740_ISP_CTRL21, 0xd0 },
{ OV9740_VFIFO_READ_START_HI, 0x01 },
{ OV9740_VFIFO_READ_START_LO, 0x40 },
{ OV9740_ISP_CTRL00, 0xff },
{ OV9740_ISP_CTRL01, 0xff },
{ OV9740_ISP_CTRL03, 0xff },
};
static const struct ov9740_reg ov9740_regs_720p[] = {
{ OV9740_X_ADDR_START_HI, 0x00 },
{ OV9740_X_ADDR_START_LO, 0x00 },
{ OV9740_Y_ADDR_START_HI, 0x00 },
{ OV9740_Y_ADDR_START_LO, 0x00 },
{ OV9740_X_ADDR_END_HI, 0x05 },
{ OV9740_X_ADDR_END_LO, 0x03 },
{ OV9740_Y_ADDR_END_HI, 0x02 },
{ OV9740_Y_ADDR_END_LO, 0xd3 },
{ OV9740_X_OUTPUT_SIZE_HI, 0x05 },
{ OV9740_X_OUTPUT_SIZE_LO, 0x00 },
{ OV9740_Y_OUTPUT_SIZE_HI, 0x02 },
{ OV9740_Y_OUTPUT_SIZE_LO, 0xd0 },
{ OV9740_ISP_CTRL1E, 0x05 },
{ OV9740_ISP_CTRL1F, 0x00 },
{ OV9740_ISP_CTRL20, 0x02 },
{ OV9740_ISP_CTRL21, 0xd0 },
{ OV9740_VFIFO_READ_START_HI, 0x02 },
{ OV9740_VFIFO_READ_START_LO, 0x30 },
{ OV9740_ISP_CTRL00, 0xff },
{ OV9740_ISP_CTRL01, 0xef },
{ OV9740_ISP_CTRL03, 0xff },
};
static enum v4l2_mbus_pixelcode ov9740_codes[] = {
V4L2_MBUS_FMT_YUYV8_2X8,
};
......@@ -727,39 +660,124 @@ static int ov9740_set_register(struct v4l2_subdev *sd,
/* select nearest higher resolution for capture */
static void ov9740_res_roundup(u32 *width, u32 *height)
{
int i;
/* Width must be a multiple of 4 pixels. */
*width = ALIGN(*width, 4);
for (i = 0; i < ARRAY_SIZE(ov9740_resolutions); i++)
if ((ov9740_resolutions[i].width >= *width) &&
(ov9740_resolutions[i].height >= *height)) {
*width = ov9740_resolutions[i].width;
*height = ov9740_resolutions[i].height;
return;
}
/* Max resolution is 1280x720 (720p). */
if (*width > OV9740_MAX_WIDTH)
*width = OV9740_MAX_WIDTH;
*width = ov9740_resolutions[OV9740_720P].width;
*height = ov9740_resolutions[OV9740_720P].height;
if (*height > OV9740_MAX_HEIGHT)
*height = OV9740_MAX_HEIGHT;
}
/* Setup registers according to resolution and color encoding */
static int ov9740_set_res(struct i2c_client *client, u32 width)
static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height)
{
u32 x_start;
u32 y_start;
u32 x_end;
u32 y_end;
bool scaling = 0;
u32 scale_input_x;
u32 scale_input_y;
int ret;
/* select register configuration for given resolution */
if (width == ov9740_resolutions[OV9740_VGA].width) {
dev_dbg(&client->dev, "Setting image size to 640x480\n");
ret = ov9740_reg_write_array(client, ov9740_regs_vga,
ARRAY_SIZE(ov9740_regs_vga));
} else if (width == ov9740_resolutions[OV9740_720P].width) {
dev_dbg(&client->dev, "Setting image size to 1280x720\n");
ret = ov9740_reg_write_array(client, ov9740_regs_720p,
ARRAY_SIZE(ov9740_regs_720p));
if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT))
scaling = 1;
/*
* Try to use as much of the sensor area as possible when supporting
* smaller resolutions. Depending on the aspect ratio of the
* chosen resolution, we can either use the full width of the sensor,
* or the full height of the sensor (or both if the aspect ratio is
* the same as 1280x720.
*/
if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) {
scale_input_x = (OV9740_MAX_HEIGHT * width) / height;
scale_input_y = OV9740_MAX_HEIGHT;
} else {
dev_err(&client->dev, "Failed to select resolution!\n");
return -EINVAL;
scale_input_x = OV9740_MAX_WIDTH;
scale_input_y = (OV9740_MAX_WIDTH * height) / width;
}
/* These describe the area of the sensor to use. */
x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2;
y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2;
x_end = x_start + scale_input_x - 1;
y_end = y_start + scale_input_y - 1;
ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI,
(scale_input_x - width) >> 8);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO,
(scale_input_x - width) & 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff);
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef |
(scaling << 4));
if (ret)
goto done;
ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff);
done:
return ret;
}
......@@ -787,7 +805,7 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
if (ret < 0)
return ret;
ret = ov9740_set_res(client, mf->width);
ret = ov9740_set_res(client, mf->width, mf->height);
if (ret < 0)
return ret;
......@@ -824,8 +842,8 @@ static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
{
a->bounds.left = 0;
a->bounds.top = 0;
a->bounds.width = ov9740_resolutions[OV9740_720P].width;
a->bounds.height = ov9740_resolutions[OV9740_720P].height;
a->bounds.width = OV9740_MAX_WIDTH;
a->bounds.height = OV9740_MAX_HEIGHT;
a->defrect = a->bounds;
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->pixelaspect.numerator = 1;
......@@ -838,8 +856,8 @@ static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
{
a->c.left = 0;
a->c.top = 0;
a->c.width = ov9740_resolutions[OV9740_720P].width;
a->c.height = ov9740_resolutions[OV9740_720P].height;
a->c.width = OV9740_MAX_WIDTH;
a->c.height = OV9740_MAX_HEIGHT;
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
return 0;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7