Commit 97a3b027 authored by Javier Martinez Canillas's avatar Javier Martinez Canillas Committed by Jon Hunter

Documentation: dt: update TI GPMC ethernet binding properties

The GPMC timing properties for device-tree have been updated
by adding a "-ns" or "-ps" suffix to indicate the units of
time the property represents. Therefore, update the timing
property names for TI GPMC ethernet binding.
Signed-off-by: default avatarJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: default avatarJon Hunter <jon-hunter@ti.com>
parent aecb65a3
...@@ -26,16 +26,16 @@ Required properties: ...@@ -26,16 +26,16 @@ Required properties:
- bank-width: Address width of the device in bytes. GPMC supports 8-bit - bank-width: Address width of the device in bytes. GPMC supports 8-bit
and 16-bit devices and so must be either 1 or 2 bytes. and 16-bit devices and so must be either 1 or 2 bytes.
- compatible: Compatible string property for the ethernet child device. - compatible: Compatible string property for the ethernet child device.
- gpmc,cs-on: Chip-select assertion time - gpmc,cs-on-ns: Chip-select assertion time
- gpmc,cs-rd-off: Chip-select de-assertion time for reads - gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
- gpmc,cs-wr-off: Chip-select de-assertion time for writes - gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
- gpmc,oe-on: Output-enable assertion time - gpmc,oe-on-ns: Output-enable assertion time
- gpmc,oe-off Output-enable de-assertion time - gpmc,oe-off-ns: Output-enable de-assertion time
- gpmc,we-on: Write-enable assertion time - gpmc,we-on-ns: Write-enable assertion time
- gpmc,we-off: Write-enable de-assertion time - gpmc,we-off-ns: Write-enable de-assertion time
- gpmc,access: Start cycle to first data capture (read access) - gpmc,access-ns: Start cycle to first data capture (read access)
- gpmc,rd-cycle: Total read cycle time - gpmc,rd-cycle-ns: Total read cycle time
- gpmc,wr-cycle: Total write cycle time - gpmc,wr-cycle-ns: Total write cycle time
- reg: Chip-select, base address (relative to chip-select) - reg: Chip-select, base address (relative to chip-select)
and size of the memory mapped for the device. and size of the memory mapped for the device.
Note that base address will be typically 0 as this Note that base address will be typically 0 as this
...@@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 { ...@@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 {
bank-width = <2>; bank-width = <2>;
gpmc,mux-add-data; gpmc,mux-add-data;
gpmc,cs-on = <0>; gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off = <186>; gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off = <186>; gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on = <12>; gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off = <48>; gpmc,adv-rd-off-ns = <48>;
gpmc,adv-wr-off = <48>; gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on = <54>; gpmc,oe-on-ns = <54>;
gpmc,oe-off = <168>; gpmc,oe-off-ns = <168>;
gpmc,we-on = <54>; gpmc,we-on-ns = <54>;
gpmc,we-off = <168>; gpmc,we-off-ns = <168>;
gpmc,rd-cycle = <186>; gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle = <186>; gpmc,wr-cycle-ns = <186>;
gpmc,access = <114>; gpmc,access-ns = <114>;
gpmc,page-burst-access = <6>; gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround = <12>; gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay = <18>; gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus = <90>; gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access = <186>; gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen; gpmc,cycle2cycle-diffcsen;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment