Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: remove unused "ddr" parameter in struct mmc_ios
  mmc: dw_mmc: Fix DDR mode support.
  mmc: core: use defined R1_STATE_PRG macro for card status
  mmc: sdhci: use f_max instead of host->clock for timeouts
  mmc: sdhci: move timeout_clk calculation farther down
  mmc: sdhci: check host->clock before using it as a denominator
  mmc: Revert "mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK"
  mmc: tmio: eliminate unused variable 'mmc' warning
  mmc: esdhc-imx: fix card interrupt loss on freescale eSDHC
  mmc: sdhci-s3c: Fix build for header change
  mmc: dw_mmc: Fix mask in IDMAC_SET_BUFFER1_SIZE macro
  mmc: cb710: fix possible pci_dev leak in cb710_pci_configure()
  mmc: core: Detect eMMC v4.5 ext_csd entries
  mmc: mmc_test: avoid stalled file in debugfs
  mmc: sdhci-s3c: add BROKEN_ADMA_ZEROLEN_DESC quirk
  mmc: sdhci: pxav3: controller needs 32 bit ADMA addressing
  mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish

drivers/misc/cb710/core.c

@@ -33,7 +33,7 @@ EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
 static int __devinit cb710_pci_configure(struct pci_dev *pdev)
 {
 	unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
-	struct pci_dev *pdev0 = pci_get_slot(pdev->bus, devfn);
+	struct pci_dev *pdev0;
 	u32 val;
 
 	cb710_pci_update_config_reg(pdev, 0x48,
@@ -43,6 +43,7 @@ static int __devinit cb710_pci_configure(struct pci_dev *pdev)
 	if (val & 0x80000000)
 		return 0;
 
+	pdev0 = pci_get_slot(pdev->bus, devfn);
 	if (!pdev0)
 		return -ENODEV;
 

drivers/mmc/card/mmc_test.c

@@ -224,7 +224,7 @@ static void mmc_test_prepare_mrq(struct mmc_test_card *test,
 static int mmc_test_busy(struct mmc_command *cmd)
 {
 	return !(cmd->resp[0] & R1_READY_FOR_DATA) ||
-		(R1_CURRENT_STATE(cmd->resp[0]) == 7);
+		(R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG);
 }
 
 /*
@@ -2900,7 +2900,7 @@ static const struct file_operations mmc_test_fops_testlist = {
 	.release	= single_release,
 };
 
-static void mmc_test_free_file_test(struct mmc_card *card)
+static void mmc_test_free_dbgfs_file(struct mmc_card *card)
 {
 	struct mmc_test_dbgfs_file *df, *dfs;
 
@@ -2917,34 +2917,21 @@ static void mmc_test_free_file_test(struct mmc_card *card)
 	mutex_unlock(&mmc_test_lock);
 }
 
-static int mmc_test_register_file_test(struct mmc_card *card)
+static int __mmc_test_register_dbgfs_file(struct mmc_card *card,
+	const char *name, mode_t mode, const struct file_operations *fops)
 {
 	struct dentry *file = NULL;
 	struct mmc_test_dbgfs_file *df;
-	int ret = 0;
-
-	mutex_lock(&mmc_test_lock);
-
-	if (card->debugfs_root)
-		file = debugfs_create_file("test", S_IWUSR | S_IRUGO,
-			card->debugfs_root, card, &mmc_test_fops_test);
-
-	if (IS_ERR_OR_NULL(file)) {
-		dev_err(&card->dev,
-			"Can't create test. Perhaps debugfs is disabled.\n");
-		ret = -ENODEV;
-		goto err;
-	}
 
 	if (card->debugfs_root)
-		file = debugfs_create_file("testlist", S_IRUGO,
-			card->debugfs_root, card, &mmc_test_fops_testlist);
+		file = debugfs_create_file(name, mode, card->debugfs_root,
+			card, fops);
 
 	if (IS_ERR_OR_NULL(file)) {
 		dev_err(&card->dev,
-			"Can't create testlist. Perhaps debugfs is disabled.\n");
-		ret = -ENODEV;
-		goto err;
+			"Can't create %s. Perhaps debugfs is disabled.\n",
+			name);
+		return -ENODEV;
 	}
 
 	df = kmalloc(sizeof(struct mmc_test_dbgfs_file), GFP_KERNEL);
@@ -2952,14 +2939,31 @@ static int mmc_test_register_file_test(struct mmc_card *card)
 		debugfs_remove(file);
 		dev_err(&card->dev,
 			"Can't allocate memory for internal usage.\n");
-		ret = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 
 	df->card = card;
 	df->file = file;
 
 	list_add(&df->link, &mmc_test_file_test);
+	return 0;
+}
+
+static int mmc_test_register_dbgfs_file(struct mmc_card *card)
+{
+	int ret;
+
+	mutex_lock(&mmc_test_lock);
+
+	ret = __mmc_test_register_dbgfs_file(card, "test", S_IWUSR | S_IRUGO,
+		&mmc_test_fops_test);
+	if (ret)
+		goto err;
+
+	ret = __mmc_test_register_dbgfs_file(card, "testlist", S_IRUGO,
+		&mmc_test_fops_testlist);
+	if (ret)
+		goto err;
 
 err:
 	mutex_unlock(&mmc_test_lock);
@@ -2974,7 +2978,7 @@ static int mmc_test_probe(struct mmc_card *card)
 	if (!mmc_card_mmc(card) && !mmc_card_sd(card))
 		return -ENODEV;
 
-	ret = mmc_test_register_file_test(card);
+	ret = mmc_test_register_dbgfs_file(card);
 	if (ret)
 		return ret;
 
@@ -2986,7 +2990,7 @@ static int mmc_test_probe(struct mmc_card *card)
 static void mmc_test_remove(struct mmc_card *card)
 {
 	mmc_test_free_result(card);
-	mmc_test_free_file_test(card);
+	mmc_test_free_dbgfs_file(card);
 }
 
 static struct mmc_driver mmc_driver = {
@@ -3006,7 +3010,7 @@ static void __exit mmc_test_exit(void)
 {
 	/* Clear stalled data if card is still plugged */
 	mmc_test_free_result(NULL);
-	mmc_test_free_file_test(NULL);
+	mmc_test_free_dbgfs_file(NULL);
 
 	mmc_unregister_driver(&mmc_driver);
 }

drivers/mmc/core/core.c

@@ -1502,7 +1502,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
 			goto out;
 		}
 	} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
-		 R1_CURRENT_STATE(cmd.resp[0]) == 7);
+		 R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG);
 out:
 	return err;
 }

drivers/mmc/core/mmc.c

@@ -259,7 +259,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	}
 
 	card->ext_csd.rev = ext_csd[EXT_CSD_REV];
-	if (card->ext_csd.rev > 5) {
+	if (card->ext_csd.rev > 6) {
 		printk(KERN_ERR "%s: unrecognised EXT_CSD revision %d\n",
 			mmc_hostname(card->host), card->ext_csd.rev);
 		err = -EINVAL;

drivers/mmc/core/mmc_ops.c

@@ -407,7 +407,7 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 			break;
 		if (mmc_host_is_spi(card->host))
 			break;
-	} while (R1_CURRENT_STATE(status) == 7);
+	} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
 
 	if (mmc_host_is_spi(card->host)) {
 		if (status & R1_SPI_ILLEGAL_COMMAND)

drivers/mmc/host/dw_mmc.c

@@ -62,7 +62,7 @@ struct idmac_desc {
 
 	u32		des1;	/* Buffer sizes */
 #define IDMAC_SET_BUFFER1_SIZE(d, s) \
-	((d)->des1 = ((d)->des1 & 0x03ffc000) | ((s) & 0x3fff))
+	((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
 
 	u32		des2;	/* buffer 1 physical address */
 
@@ -699,7 +699,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	/* DDR mode set */
-	if (ios->ddr) {
+	if (ios->timing == MMC_TIMING_UHS_DDR50) {
 		regs = mci_readl(slot->host, UHS_REG);
 		regs |= (0x1 << slot->id) << 16;
 		mci_writel(slot->host, UHS_REG, regs);
@@ -1646,7 +1646,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 			mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED)
-		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
 
 #ifdef CONFIG_MMC_DW_IDMAC
 	mmc->max_segs = host->ring_size;

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -27,6 +27,7 @@
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
 
+#define	SDHCI_CTRL_D3CD			0x08
 /* VENDOR SPEC register */
 #define SDHCI_VENDOR_SPEC		0xC0
 #define  SDHCI_VENDOR_SPEC_SDIO_QUIRK	0x00000002
@@ -141,13 +142,32 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
-
-	if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
-			&& (boarddata->cd_type == ESDHC_CD_GPIO)))
-		/*
-		 * these interrupts won't work with a custom card_detect gpio
-		 */
-		val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+	u32 data;
+
+	if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
+		if (boarddata->cd_type == ESDHC_CD_GPIO)
+			/*
+			 * These interrupts won't work with a custom
+			 * card_detect gpio (only applied to mx25/35)
+			 */
+			val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+
+		if (val & SDHCI_INT_CARD_INT) {
+			/*
+			 * Clear and then set D3CD bit to avoid missing the
+			 * card interrupt.  This is a eSDHC controller problem
+			 * so we need to apply the following workaround: clear
+			 * and set D3CD bit will make eSDHC re-sample the card
+			 * interrupt. In case a card interrupt was lost,
+			 * re-sample it by the following steps.
+			 */
+			data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
+			data &= ~SDHCI_CTRL_D3CD;
+			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+			data |= SDHCI_CTRL_D3CD;
+			writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+		}
+	}
 
 	if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
 				&& (reg == SDHCI_INT_STATUS)
@@ -217,8 +237,10 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 		 */
 		return;
 	case SDHCI_HOST_CONTROL:
-		/* FSL messed up here, so we can just keep those two */
-		new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS);
+		/* FSL messed up here, so we can just keep those three */
+		new_val = val & (SDHCI_CTRL_LED | \
+				SDHCI_CTRL_4BITBUS | \
+				SDHCI_CTRL_D3CD);
 		/* ensure the endianess */
 		new_val |= ESDHC_HOST_CONTROL_LE;
 		/* DMA mode bits are shifted */

drivers/mmc/host/sdhci-pxav3.c

@@ -195,7 +195,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
 	clk_enable(clk);
 
 	host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
-		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
+		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+		| SDHCI_QUIRK_32BIT_ADMA_SIZE;
 
 	/* enable 1/8V DDR capable */
 	host->mmc->caps |= MMC_CAP_1_8V_DDR;

drivers/mmc/host/sdhci-s3c.c

@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 
 #include <linux/mmc/host.h>
 
@@ -502,6 +503,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	/* This host supports the Auto CMD12 */
 	host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
 
+	/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
+	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
+
 	if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
 	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
 		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;

drivers/mmc/host/sdhci.c

@@ -628,12 +628,11 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 	/* timeout in us */
 	if (!data)
 		target_timeout = cmd->cmd_timeout_ms * 1000;
-	else
-		target_timeout = data->timeout_ns / 1000 +
-			data->timeout_clks / host->clock;
-
-	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-		host->timeout_clk = host->clock / 1000;
+	else {
+		target_timeout = data->timeout_ns / 1000;
+		if (host->clock)
+			target_timeout += data->timeout_clks / host->clock;
+	}
 
 	/*
 	 * Figure out needed cycles.
@@ -645,7 +644,6 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 	 *     =>
 	 *     (1) / (2) > 2^6
 	 */
-	BUG_ON(!host->timeout_clk);
 	count = 0;
 	current_timeout = (1 << 13) * 1000 / host->timeout_clk;
 	while (current_timeout < target_timeout) {
@@ -1867,9 +1865,6 @@ static void sdhci_tasklet_finish(unsigned long param)
 
 	del_timer(&host->timer);
 
-	if (host->version >= SDHCI_SPEC_300)
-		del_timer(&host->tuning_timer);
-
 	mrq = host->mrq;
 
 	/*
@@ -2461,22 +2456,6 @@ int sdhci_add_host(struct sdhci_host *host)
 		host->max_clk = host->ops->get_max_clock(host);
 	}
 
-	host->timeout_clk =
-		(caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
-	if (host->timeout_clk == 0) {
-		if (host->ops->get_timeout_clock) {
-			host->timeout_clk = host->ops->get_timeout_clock(host);
-		} else if (!(host->quirks &
-				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
-			printk(KERN_ERR
-			       "%s: Hardware doesn't specify timeout clock "
-			       "frequency.\n", mmc_hostname(mmc));
-			return -ENODEV;
-		}
-	}
-	if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
-		host->timeout_clk *= 1000;
-
 	/*
 	 * In case of Host Controller v3.00, find out whether clock
 	 * multiplier is supported.
@@ -2509,10 +2488,26 @@ int sdhci_add_host(struct sdhci_host *host)
 	} else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
+	host->timeout_clk =
+		(caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
+	if (host->timeout_clk == 0) {
+		if (host->ops->get_timeout_clock) {
+			host->timeout_clk = host->ops->get_timeout_clock(host);
+		} else if (!(host->quirks &
+				SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+			printk(KERN_ERR
+			       "%s: Hardware doesn't specify timeout clock "
+			       "frequency.\n", mmc_hostname(mmc));
+			return -ENODEV;
+		}
+	}
+	if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
+		host->timeout_clk *= 1000;
+
 	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-		mmc->max_discard_to = (1 << 27) / (mmc->f_max / 1000);
-	else
-		mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+		host->timeout_clk = mmc->f_max / 1000;
+
+	mmc->max_discard_to = (1 << 27) / host->timeout_clk;
 
 	mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
 

drivers/mmc/host/tmio_mmc.c

@@ -27,7 +27,6 @@
 static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
 {
 	const struct mfd_cell *cell = mfd_get_cell(dev);
-	struct mmc_host *mmc = platform_get_drvdata(dev);
 	int ret;
 
 	ret = tmio_mmc_host_suspend(&dev->dev);
@@ -42,7 +41,6 @@ static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
 static int tmio_mmc_resume(struct platform_device *dev)
 {
 	const struct mfd_cell *cell = mfd_get_cell(dev);
-	struct mmc_host *mmc = platform_get_drvdata(dev);
 	int ret = 0;
 
 	/* Tell the MFD core we are ready to be enabled */

include/linux/mmc/host.h

@@ -56,8 +56,6 @@ struct mmc_ios {
 #define MMC_TIMING_UHS_SDR104	4
 #define MMC_TIMING_UHS_DDR50	5
 
-	unsigned char	ddr;			/* dual data rate used */
-
 #define MMC_SDR_MODE		0
 #define MMC_1_2V_DDR_MODE	1
 #define MMC_1_8V_DDR_MODE	2