Merge tag 'platform-drivers-x86-v5.12-1' of...

Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - Microsoft Surface devices System Aggregator Module support

   - SW_TABLET_MODE reporting improvements

   - thinkpad_acpi keyboard language setting support

   - platform / DPTF profile settings support:

      - Base / userspace API parts merged from Rafael's acpi-platform
        branch

      - thinkpad_acpi and ideapad-laptop support through pdx86

   - Remove support for some obsolete Intel MID platforms through
     merging of the shared intel-mid-removal branch

   - Big cleanup of the ideapad-laptop driver

   - Misc other fixes / new hw support / quirks"

* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
  platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
  platform/surface: aggregator: Fix access of unaligned value
  tools/power/x86/intel-speed-select: Update version to 1.8
  tools/power/x86/intel-speed-select: Add new command to get/set TRL
  tools/power/x86/intel-speed-select: Add new command turbo-mode
  Platform: OLPC: Constify static struct regulator_ops
  platform/surface: Add Surface Hot-Plug driver
  platform/x86: intel_scu_wdt: Drop mistakenly added const
  platform/x86: Kconfig: add missing selects for ideapad-laptop
  platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
  platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
  platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
  platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
  platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
  platform/x86: Move all dell drivers to their own subdirectory
  Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
  Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
  platform/x86: ideapad-laptop: add "always on USB charging" control support
  platform/x86: ideapad-laptop: add keyboard backlight control support
  platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
  ...

Documentation/ABI/testing/sysfs-platform-ideapad-laptop

-What:		/sys/devices/platform/ideapad/camera_power
+What:		/sys/bus/platform/devices/VPC2004:*/camera_power
 Date:		Dec 2010
 KernelVersion:	2.6.37
 Contact:	"Ike Panhc <ike.pan@canonical.com>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
 
-What:		/sys/devices/platform/ideapad/fan_mode
+What:		/sys/bus/platform/devices/VPC2004:*/fan_mode
 Date:		June 2012
 KernelVersion:	3.6
 Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
@@ -18,7 +18,7 @@ Description:
 			* 2 -> Dust Cleaning
 			* 4 -> Efficient Thermal Dissipation Mode
 
-What:		/sys/devices/platform/ideapad/touchpad
+What:		/sys/bus/platform/devices/VPC2004:*/touchpad
 Date:		May 2017
 KernelVersion:	4.13
 Contact:	"Ritesh Raj Sarraf <rrs@debian.org>"
@@ -27,7 +27,16 @@ Description:
 			* 1 -> Switched On
 			* 0 -> Switched Off
 
-What:		/sys/bus/pci/devices/<bdf>/<device>/VPC2004:00/fn_lock
+What:		/sys/bus/platform/devices/VPC2004:*/conservation_mode
+Date:		Aug 2017
+KernelVersion:	4.14
+Contact:	platform-driver-x86@vger.kernel.org
+Description:
+		Controls whether the conservation mode is enabled or not.
+		This feature limits the maximum battery charge percentage to
+		around 50-60% in order to prolong the lifetime of the battery.
+
+What:		/sys/bus/platform/devices/VPC2004:*/fn_lock
 Date:		May 2018
 KernelVersion:	4.18
 Contact:	"Oleg Keri <ezhi99@gmail.com>"
@@ -41,3 +50,12 @@ Description:
 
 		  # echo "0" >	\
 		  /sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock
+
+What:		/sys/bus/platform/devices/VPC2004:*/usb_charging
+Date:		Feb 2021
+KernelVersion:	5.12
+Contact:	platform-driver-x86@vger.kernel.org
+Description:
+		Controls whether the "always on USB charging" feature is
+		enabled or not. This feature enables charging USB devices
+		even if the computer is not turned on.

Documentation/admin-guide/laptops/thinkpad-acpi.rst

@@ -51,6 +51,7 @@ detailed description):
 	- UWB enable and disable
 	- LCD Shadow (PrivacyGuard) enable and disable
 	- Lap mode sensor
+	- Setting keyboard language
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -1466,6 +1467,30 @@ Sysfs notes
 	rfkill controller switch "tpacpi_uwb_sw": refer to
 	Documentation/driver-api/rfkill.rst for details.
 
+
+Setting keyboard language
+-------------------------
+
+sysfs: keyboard_lang
+
+This feature is used to set keyboard language to ECFW using ASL interface.
+Fewer thinkpads models like T580 , T590 , T15 Gen 1 etc.. has "=", "(',
+")" numeric keys, which are not displaying correctly, when keyboard language
+is other than "english". This is because the default keyboard language in ECFW
+is set as "english". Hence using this sysfs, user can set the correct keyboard
+language to ECFW and then these key's will work correctly.
+
+Example of command to set keyboard language is mentioned below::
+
+        echo jp > /sys/devices/platform/thinkpad_acpi/keyboard_lang
+
+Text corresponding to keyboard layout to be set in sysfs are: be(Belgian),
+cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian),
+fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan),
+nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden),
+tr(Turkey)
+
+
 Adaptive keyboard
 -----------------
 

Documentation/driver-api/index.rst

@@ -99,6 +99,7 @@ available subsections can be seen below.
    rfkill
    serial/index
    sm501
+   surface_aggregator/index
    switchtec
    sync_file
    vfio-mediated-device

Documentation/driver-api/surface_aggregator/client-api.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+===============================
+Client Driver API Documentation
+===============================
+
+.. contents::
+    :depth: 2
+
+
+Serial Hub Communication
+========================
+
+.. kernel-doc:: include/linux/surface_aggregator/serial_hub.h
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_packet_layer.c
+    :export:
+
+
+Controller and Core Interface
+=============================
+
+.. kernel-doc:: include/linux/surface_aggregator/controller.h
+
+.. kernel-doc:: drivers/platform/surface/aggregator/controller.c
+    :export:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/core.c
+    :export:
+
+
+Client Bus and Client Device API
+================================
+
+.. kernel-doc:: include/linux/surface_aggregator/device.h
+
+.. kernel-doc:: drivers/platform/surface/aggregator/bus.c
+    :export:

Documentation/driver-api/surface_aggregator/clients/cdev.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+.. |u8| replace:: :c:type:`u8 <u8>`
+.. |u16| replace:: :c:type:`u16 <u16>`
+.. |ssam_cdev_request| replace:: :c:type:`struct ssam_cdev_request <ssam_cdev_request>`
+.. |ssam_cdev_request_flags| replace:: :c:type:`enum ssam_cdev_request_flags <ssam_cdev_request_flags>`
+
+==============================
+User-Space EC Interface (cdev)
+==============================
+
+The ``surface_aggregator_cdev`` module provides a misc-device for the SSAM
+controller to allow for a (more or less) direct connection from user-space to
+the SAM EC. It is intended to be used for development and debugging, and
+therefore should not be used or relied upon in any other way. Note that this
+module is not loaded automatically, but instead must be loaded manually.
+
+The provided interface is accessible through the ``/dev/surface/aggregator``
+device-file. All functionality of this interface is provided via IOCTLs.
+These IOCTLs and their respective input/output parameter structs are defined in
+``include/uapi/linux/surface_aggregator/cdev.h``.
+
+A small python library and scripts for accessing this interface can be found
+at https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam.
+
+
+Controller IOCTLs
+=================
+
+The following IOCTLs are provided:
+
+.. flat-table:: Controller IOCTLs
+   :widths: 1 1 1 1 4
+   :header-rows: 1
+
+   * - Type
+     - Number
+     - Direction
+     - Name
+     - Description
+
+   * - ``0xA5``
+     - ``1``
+     - ``WR``
+     - ``REQUEST``
+     - Perform synchronous SAM request.
+
+
+``REQUEST``
+-----------
+
+Defined as ``_IOWR(0xA5, 1, struct ssam_cdev_request)``.
+
+Executes a synchronous SAM request. The request specification is passed in
+as argument of type |ssam_cdev_request|, which is then written to/modified
+by the IOCTL to return status and result of the request.
+
+Request payload data must be allocated separately and is passed in via the
+``payload.data`` and ``payload.length`` members. If a response is required,
+the response buffer must be allocated by the caller and passed in via the
+``response.data`` member. The ``response.length`` member must be set to the
+capacity of this buffer, or if no response is required, zero. Upon
+completion of the request, the call will write the response to the response
+buffer (if its capacity allows it) and overwrite the length field with the
+actual size of the response, in bytes.
+
+Additionally, if the request has a response, this must be indicated via the
+request flags, as is done with in-kernel requests. Request flags can be set
+via the ``flags`` member and the values correspond to the values found in
+|ssam_cdev_request_flags|.
+
+Finally, the status of the request itself is returned in the ``status``
+member (a negative errno value indicating failure). Note that failure
+indication of the IOCTL is separated from failure indication of the request:
+The IOCTL returns a negative status code if anything failed during setup of
+the request (``-EFAULT``) or if the provided argument or any of its fields
+are invalid (``-EINVAL``). In this case, the status value of the request
+argument may be set, providing more detail on what went wrong (e.g.
+``-ENOMEM`` for out-of-memory), but this value may also be zero. The IOCTL
+will return with a zero status code in case the request has been set up,
+submitted, and completed (i.e. handed back to user-space) successfully from
+inside the IOCTL, but the request ``status`` member may still be negative in
+case the actual execution of the request failed after it has been submitted.
+
+A full definition of the argument struct is provided below:
+
+.. kernel-doc:: include/uapi/linux/surface_aggregator/cdev.h

Documentation/driver-api/surface_aggregator/clients/index.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+===========================
+Client Driver Documentation
+===========================
+
+This is the documentation for client drivers themselves. Refer to
+:doc:`../client` for documentation on how to write client drivers.
+
+.. toctree::
+   :maxdepth: 1
+
+   cdev
+   san
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/driver-api/surface_aggregator/clients/san.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+.. |san_client_link| replace:: :c:func:`san_client_link`
+.. |san_dgpu_notifier_register| replace:: :c:func:`san_dgpu_notifier_register`
+.. |san_dgpu_notifier_unregister| replace:: :c:func:`san_dgpu_notifier_unregister`
+
+===================
+Surface ACPI Notify
+===================
+
+The Surface ACPI Notify (SAN) device provides the bridge between ACPI and
+SAM controller. Specifically, ACPI code can execute requests and handle
+battery and thermal events via this interface. In addition to this, events
+relating to the discrete GPU (dGPU) of the Surface Book 2 can be sent from
+ACPI code (note: the Surface Book 3 uses a different method for this). The
+only currently known event sent via this interface is a dGPU power-on
+notification. While this driver handles the former part internally, it only
+relays the dGPU events to any other driver interested via its public API and
+does not handle them.
+
+The public interface of this driver is split into two parts: Client
+registration and notifier-block registration.
+
+A client to the SAN interface can be linked as consumer to the SAN device
+via |san_client_link|. This can be used to ensure that the a client
+receiving dGPU events does not miss any events due to the SAN interface not
+being set up as this forces the client driver to unbind once the SAN driver
+is unbound.
+
+Notifier-blocks can be registered by any device for as long as the module is
+loaded, regardless of being linked as client or not. Registration is done
+with |san_dgpu_notifier_register|. If the notifier is not needed any more, it
+should be unregistered via |san_dgpu_notifier_unregister|.
+
+Consult the API documentation below for more details.
+
+
+API Documentation
+=================
+
+.. kernel-doc:: include/linux/surface_acpi_notify.h
+
+.. kernel-doc:: drivers/platform/surface/surface_acpi_notify.c
+    :export:

Documentation/driver-api/surface_aggregator/index.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+=======================================
+Surface System Aggregator Module (SSAM)
+=======================================
+
+.. toctree::
+   :maxdepth: 2
+
+   overview
+   client
+   clients/index
+   ssh
+   internal
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/driver-api/surface_aggregator/internal-api.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+==========================
+Internal API Documentation
+==========================
+
+.. contents::
+    :depth: 2
+
+
+Packet Transport Layer
+======================
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_parser.h
+    :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_parser.c
+    :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_msgb.h
+    :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_packet_layer.h
+    :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_packet_layer.c
+    :internal:
+
+
+Request Transport Layer
+=======================
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_request_layer.h
+    :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_request_layer.c
+    :internal:
+
+
+Controller
+==========
+
+.. kernel-doc:: drivers/platform/surface/aggregator/controller.h
+    :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/controller.c
+    :internal:
+
+
+Client Device Bus
+=================
+
+.. kernel-doc:: drivers/platform/surface/aggregator/bus.c
+    :internal:
+
+
+Core
+====
+
+.. kernel-doc:: drivers/platform/surface/aggregator/core.c
+    :internal:
+
+
+Trace Helpers
+=============
+
+.. kernel-doc:: drivers/platform/surface/aggregator/trace.h

Documentation/driver-api/surface_aggregator/overview.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+========
+Overview
+========
+
+The Surface/System Aggregator Module (SAM, SSAM) is an (arguably *the*)
+embedded controller (EC) on Microsoft Surface devices. It has been originally
+introduced on 4th generation devices (Surface Pro 4, Surface Book 1), but
+its responsibilities and feature-set have since been expanded significantly
+with the following generations.
+
+
+Features and Integration
+========================
+
+Not much is currently known about SAM on 4th generation devices (Surface Pro
+4, Surface Book 1), due to the use of a different communication interface
+between host and EC (as detailed below). On 5th (Surface Pro 2017, Surface
+Book 2, Surface Laptop 1) and later generation devices, SAM is responsible
+for providing battery information (both current status and static values,
+such as maximum capacity etc.), as well as an assortment of temperature
+sensors (e.g. skin temperature) and cooling/performance-mode setting to the
+host. On the Surface Book 2, specifically, it additionally provides an
+interface for properly handling clipboard detachment (i.e. separating the
+display part from the keyboard part of the device), on the Surface Laptop 1
+and 2 it is required for keyboard HID input. This HID subsystem has been
+restructured for 7th generation devices and on those, specifically Surface
+Laptop 3 and Surface Book 3, is responsible for all major HID input (i.e.
+keyboard and touchpad).
+
+While features have not changed much on a coarse level since the 5th
+generation, internal interfaces have undergone some rather large changes. On
+5th and 6th generation devices, both battery and temperature information is
+exposed to ACPI via a shim driver (referred to as Surface ACPI Notify, or
+SAN), translating ACPI generic serial bus write-/read-accesses to SAM
+requests. On 7th generation devices, this additional layer is gone and these
+devices require a driver hooking directly into the SAM interface. Equally,
+on newer generations, less devices are declared in ACPI, making them a bit
+harder to discover and requiring us to hard-code a sort of device registry.
+Due to this, a SSAM bus and subsystem with client devices
+(:c:type:`struct ssam_device <ssam_device>`) has been implemented.
+
+
+Communication
+=============
+
+The type of communication interface between host and EC depends on the
+generation of the Surface device. On 4th generation devices, host and EC
+communicate via HID, specifically using a HID-over-I2C device, whereas on
+5th and later generations, communication takes place via a USART serial
+device. In accordance to the drivers found on other operating systems, we
+refer to the serial device and its driver as Surface Serial Hub (SSH). When
+needed, we differentiate between both types of SAM by referring to them as
+SAM-over-SSH and SAM-over-HID.
+
+Currently, this subsystem only supports SAM-over-SSH. The SSH communication
+interface is described in more detail below. The HID interface has not been
+reverse engineered yet and it is, at the moment, unclear how many (and
+which) concepts of the SSH interface detailed below can be transferred to
+it.
+
+Surface Serial Hub
+------------------
+
+As already elaborated above, the Surface Serial Hub (SSH) is the
+communication interface for SAM on 5th- and all later-generation Surface
+devices. On the highest level, communication can be separated into two main
+types: Requests, messages sent from host to EC that may trigger a direct
+response from the EC (explicitly associated with the request), and events
+(sometimes also referred to as notifications), sent from EC to host without
+being a direct response to a previous request. We may also refer to requests
+without response as commands. In general, events need to be enabled via one
+of multiple dedicated requests before they are sent by the EC.
+
+See :doc:`ssh` for a more technical protocol documentation and
+:doc:`internal` for an overview of the internal driver architecture.

Documentation/userspace-api/ioctl/ioctl-number.rst

@@ -324,6 +324,8 @@ Code  Seq#    Include File                                           Comments
 0xA3  90-9F  linux/dtlk.h
 0xA4  00-1F  uapi/linux/tee.h                                        Generic TEE subsystem
 0xA4  00-1F  uapi/asm/sgx.h                                          <mailto:linux-sgx@vger.kernel.org>
+0xA5  01     linux/surface_aggregator/cdev.h                         Microsoft Surface Platform System Aggregator
+                                                                     <mailto:luzmaximilian@gmail.com>
 0xAA  00-3F  linux/uapi/linux/userfaultfd.h
 0xAB  00-1F  linux/nbd.h
 0xAC  00-1F  linux/raw.h

MAINTAINERS

@@ -4946,17 +4946,17 @@ M:	Matthew Garrett <mjg59@srcf.ucam.org>
 M:	Pali Rohár <pali@kernel.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/dell-laptop.c
+F:	drivers/platform/x86/dell/dell-laptop.c
 
 DELL LAPTOP FREEFALL DRIVER
 M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
-F:	drivers/platform/x86/dell-smo8800.c
+F:	drivers/platform/x86/dell/dell-smo8800.c
 
 DELL LAPTOP RBTN DRIVER
 M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
-F:	drivers/platform/x86/dell-rbtn.*
+F:	drivers/platform/x86/dell/dell-rbtn.*
 
 DELL LAPTOP SMM DRIVER
 M:	Pali Rohár <pali@kernel.org>
@@ -4968,26 +4968,26 @@ DELL REMOTE BIOS UPDATE DRIVER
 M:	Stuart Hayes <stuart.w.hayes@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/dell_rbu.c
+F:	drivers/platform/x86/dell/dell_rbu.c
 
 DELL SMBIOS DRIVER
 M:	Pali Rohár <pali@kernel.org>
 M:	Mario Limonciello <mario.limonciello@dell.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/dell-smbios.*
+F:	drivers/platform/x86/dell/dell-smbios.*
 
 DELL SMBIOS SMM DRIVER
 M:	Mario Limonciello <mario.limonciello@dell.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/dell-smbios-smm.c
+F:	drivers/platform/x86/dell/dell-smbios-smm.c
 
 DELL SMBIOS WMI DRIVER
 M:	Mario Limonciello <mario.limonciello@dell.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/dell-smbios-wmi.c
+F:	drivers/platform/x86/dell/dell-smbios-wmi.c
 F:	tools/wmi/dell-smbios-example.c
 
 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
@@ -4995,12 +4995,12 @@ M:	Stuart Hayes <stuart.w.hayes@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	Documentation/driver-api/dcdbas.rst
-F:	drivers/platform/x86/dcdbas.*
+F:	drivers/platform/x86/dell/dcdbas.*
 
 DELL WMI DESCRIPTOR DRIVER
 M:	Mario Limonciello <mario.limonciello@dell.com>
 S:	Maintained
-F:	drivers/platform/x86/dell-wmi-descriptor.c
+F:	drivers/platform/x86/dell/dell-wmi-descriptor.c
 
 DELL WMI SYSMAN DRIVER
 M:	Divya Bharathi <divya.bharathi@dell.com>
@@ -5009,13 +5009,13 @@ M:	Prasanth Ksr <prasanth.ksr@dell.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-class-firmware-attributes
-F:	drivers/platform/x86/dell-wmi-sysman/
+F:	drivers/platform/x86/dell/dell-wmi-sysman/
 
 DELL WMI NOTIFICATIONS DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
 M:	Pali Rohár <pali@kernel.org>
 S:	Maintained
-F:	drivers/platform/x86/dell-wmi.c
+F:	drivers/platform/x86/dell/dell-wmi.c
 
 DELTA ST MEDIA DRIVER
 M:	Hugues Fruchet <hugues.fruchet@st.com>
@@ -8908,7 +8908,6 @@ L:	linux-gpio@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
 F:	drivers/gpio/gpio-ich.c
-F:	drivers/gpio/gpio-intel-mid.c
 F:	drivers/gpio/gpio-merrifield.c
 F:	drivers/gpio/gpio-ml-ioh.c
 F:	drivers/gpio/gpio-pch.c
@@ -9080,7 +9079,6 @@ M:	Andy Shevchenko <andy@kernel.org>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel.git
 F:	drivers/gpio/gpio-*cove.c
-F:	drivers/gpio/gpio-msic.c
 
 INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
 M:	Andy Shevchenko <andy@kernel.org>
@@ -11798,12 +11796,31 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git
 F:	drivers/platform/surface/
 
+MICROSOFT SURFACE HOT-PLUG DRIVER
+M:	Maximilian Luz <luzmaximilian@gmail.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/surface/surface_hotplug.c
+
 MICROSOFT SURFACE PRO 3 BUTTON DRIVER
 M:	Chen Yu <yu.c.chen@intel.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Supported
 F:	drivers/platform/surface/surfacepro3_button.c
 
+MICROSOFT SURFACE SYSTEM AGGREGATOR SUBSYSTEM
+M:	Maximilian Luz <luzmaximilian@gmail.com>
+S:	Maintained
+W:	https://github.com/linux-surface/surface-aggregator-module
+C:	irc://chat.freenode.net/##linux-surface
+F:	Documentation/driver-api/surface_aggregator/
+F:	drivers/platform/surface/aggregator/
+F:	drivers/platform/surface/surface_acpi_notify.c
+F:	drivers/platform/surface/surface_aggregator_cdev.c
+F:	include/linux/surface_acpi_notify.h
+F:	include/linux/surface_aggregator/
+F:	include/uapi/linux/surface_aggregator/
+
 MICROTEK X6 SCANNER
 M:	Oliver Neukum <oliver@neukum.org>
 S:	Maintained
@@ -17656,7 +17673,7 @@ F:	drivers/thermal/gov_power_allocator.c
 F:	include/trace/events/thermal_power_allocator.h
 
 THINKPAD ACPI EXTRAS DRIVER
-M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
+M:	Henrique de Moraes Holschuh <hmh@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained

arch/x86/platform/intel-mid/device_libs/Makefile

@@ -30,4 +30,3 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
 obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_mrfld_wdt.o

drivers/gpio/Kconfig

@@ -1253,13 +1253,6 @@ config GPIO_MAX77650
 	  GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor.
 	  These chips have a single pin that can be configured as GPIO.
 
-config GPIO_MSIC
-	bool "Intel MSIC mixed signal gpio support"
-	depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC
-	help
-	  Enable support for GPIO on intel MSIC controllers found in
-	  intel MID devices
-
 config GPIO_PALMAS
 	bool "TI PALMAS series PMICs GPIO"
 	depends on MFD_PALMAS
@@ -1455,13 +1448,6 @@ config GPIO_BT8XX
 
 	  If unsure, say N.
 
-config GPIO_INTEL_MID
-	bool "Intel MID GPIO support"
-	depends on X86_INTEL_MID
-	select GPIOLIB_IRQCHIP
-	help
-	  Say Y here to support Intel MID GPIO.
-
 config GPIO_MERRIFIELD
 	tristate "Intel Merrifield GPIO support"
 	depends on X86_INTEL_MID

drivers/gpio/Makefile

@@ -67,7 +67,6 @@ obj-$(CONFIG_GPIO_HISI)                 += gpio-hisi.o
 obj-$(CONFIG_GPIO_HLWD)			+= gpio-hlwd.o
 obj-$(CONFIG_HTC_EGPIO)			+= gpio-htc-egpio.o
 obj-$(CONFIG_GPIO_ICH)			+= gpio-ich.o
-obj-$(CONFIG_GPIO_INTEL_MID)		+= gpio-intel-mid.o
 obj-$(CONFIG_GPIO_IOP)			+= gpio-iop.o
 obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
 obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o

drivers/gpio/TODO

@@ -101,7 +101,7 @@ for a few GPIOs. Those should stay where they are.
 
 At the same time it makes sense to get rid of code duplication in existing or
 new coming drivers. For example, gpio-ml-ioh should be incorporated into
-gpio-pch. In similar way gpio-intel-mid into gpio-pxa.
+gpio-pch.
 
 
 Generic MMIO GPIO

drivers/gpio/gpio-msic.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * Intel Medfield MSIC GPIO driver>
- * Copyright (c) 2011, Intel Corporation.
- *
- * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
- * Based on intel_pmic_gpio.c
- */
-
-#include <linux/gpio/driver.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* the offset for the mapping of global gpio pin to irq */
-#define MSIC_GPIO_IRQ_OFFSET	0x100
-
-#define MSIC_GPIO_DIR_IN	0
-#define MSIC_GPIO_DIR_OUT	BIT(5)
-#define MSIC_GPIO_TRIG_FALL	BIT(1)
-#define MSIC_GPIO_TRIG_RISE	BIT(2)
-
-/* masks for msic gpio output GPIOxxxxCTLO registers */
-#define MSIC_GPIO_DIR_MASK	BIT(5)
-#define MSIC_GPIO_DRV_MASK	BIT(4)
-#define MSIC_GPIO_REN_MASK	BIT(3)
-#define MSIC_GPIO_RVAL_MASK	(BIT(2) | BIT(1))
-#define MSIC_GPIO_DOUT_MASK	BIT(0)
-
-/* masks for msic gpio input GPIOxxxxCTLI registers */
-#define MSIC_GPIO_GLBYP_MASK	BIT(5)
-#define MSIC_GPIO_DBNC_MASK	(BIT(4) | BIT(3))
-#define MSIC_GPIO_INTCNT_MASK	(BIT(2) | BIT(1))
-#define MSIC_GPIO_DIN_MASK	BIT(0)
-
-#define MSIC_NUM_GPIO		24
-
-struct msic_gpio {
-	struct platform_device	*pdev;
-	struct mutex		buslock;
-	struct gpio_chip	chip;
-	int			irq;
-	unsigned		irq_base;
-	unsigned long		trig_change_mask;
-	unsigned		trig_type;
-};
-
-/*
- * MSIC has 24 gpios, 16 low voltage (1.2-1.8v) and 8 high voltage (3v).
- * Both the high and low voltage gpios are divided in two banks.
- * GPIOs are numbered with GPIO0LV0 as gpio_base in the following order:
- * GPIO0LV0..GPIO0LV7: low voltage, bank 0, gpio_base
- * GPIO1LV0..GPIO1LV7: low voltage, bank 1,  gpio_base + 8
- * GPIO0HV0..GPIO0HV3: high voltage, bank 0, gpio_base + 16
- * GPIO1HV0..GPIO1HV3: high voltage, bank 1, gpio_base + 20
- */
-
-static int msic_gpio_to_ireg(unsigned offset)
-{
-	if (offset >= MSIC_NUM_GPIO)
-		return -EINVAL;
-
-	if (offset < 8)
-		return INTEL_MSIC_GPIO0LV0CTLI - offset;
-	if (offset < 16)
-		return INTEL_MSIC_GPIO1LV0CTLI - offset + 8;
-	if (offset < 20)
-		return INTEL_MSIC_GPIO0HV0CTLI - offset + 16;
-
-	return INTEL_MSIC_GPIO1HV0CTLI - offset + 20;
-}
-
-static int msic_gpio_to_oreg(unsigned offset)
-{
-	if (offset >= MSIC_NUM_GPIO)
-		return -EINVAL;
-
-	if (offset < 8)
-		return INTEL_MSIC_GPIO0LV0CTLO - offset;
-	if (offset < 16)
-		return INTEL_MSIC_GPIO1LV0CTLO - offset + 8;
-	if (offset < 20)
-		return INTEL_MSIC_GPIO0HV0CTLO - offset + 16;
-
-	return INTEL_MSIC_GPIO1HV0CTLO - offset + 20;
-}
-
-static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	int reg;
-
-	reg = msic_gpio_to_oreg(offset);
-	if (reg < 0)
-		return reg;
-
-	return intel_msic_reg_update(reg, MSIC_GPIO_DIR_IN, MSIC_GPIO_DIR_MASK);
-}
-
-static int msic_gpio_direction_output(struct gpio_chip *chip,
-			unsigned offset, int value)
-{
-	int reg;
-	unsigned mask;
-
-	value = (!!value) | MSIC_GPIO_DIR_OUT;
-	mask = MSIC_GPIO_DIR_MASK | MSIC_GPIO_DOUT_MASK;
-
-	reg = msic_gpio_to_oreg(offset);
-	if (reg < 0)
-		return reg;
-
-	return intel_msic_reg_update(reg, value, mask);
-}
-
-static int msic_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	u8 r;
-	int ret;
-	int reg;
-
-	reg = msic_gpio_to_ireg(offset);
-	if (reg < 0)
-		return reg;
-
-	ret = intel_msic_reg_read(reg, &r);
-	if (ret < 0)
-		return ret;
-
-	return !!(r & MSIC_GPIO_DIN_MASK);
-}
-
-static void msic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	int reg;
-
-	reg = msic_gpio_to_oreg(offset);
-	if (reg < 0)
-		return;
-
-	intel_msic_reg_update(reg, !!value , MSIC_GPIO_DOUT_MASK);
-}
-
-/*
- * This is called from genirq with mg->buslock locked and
- * irq_desc->lock held. We can not access the scu bus here, so we
- * store the change and update in the bus_sync_unlock() function below
- */
-static int msic_irq_type(struct irq_data *data, unsigned type)
-{
-	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
-	u32 gpio = data->irq - mg->irq_base;
-
-	if (gpio >= mg->chip.ngpio)
-		return -EINVAL;
-
-	/* mark for which gpio the trigger changed, protected by buslock */
-	mg->trig_change_mask |= (1 << gpio);
-	mg->trig_type = type;
-
-	return 0;
-}
-
-static int msic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct msic_gpio *mg = gpiochip_get_data(chip);
-	return mg->irq_base + offset;
-}
-
-static void msic_bus_lock(struct irq_data *data)
-{
-	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
-	mutex_lock(&mg->buslock);
-}
-
-static void msic_bus_sync_unlock(struct irq_data *data)
-{
-	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
-	int offset;
-	int reg;
-	u8 trig = 0;
-
-	/* We can only get one change at a time as the buslock covers the
-	   entire transaction. The irq_desc->lock is dropped before we are
-	   called but that is fine */
-	if (mg->trig_change_mask) {
-		offset = __ffs(mg->trig_change_mask);
-
-		reg = msic_gpio_to_ireg(offset);
-		if (reg < 0)
-			goto out;
-
-		if (mg->trig_type & IRQ_TYPE_EDGE_RISING)
-			trig |= MSIC_GPIO_TRIG_RISE;
-		if (mg->trig_type & IRQ_TYPE_EDGE_FALLING)
-			trig |= MSIC_GPIO_TRIG_FALL;
-
-		intel_msic_reg_update(reg, trig, MSIC_GPIO_INTCNT_MASK);
-		mg->trig_change_mask = 0;
-	}
-out:
-	mutex_unlock(&mg->buslock);
-}
-
-/* Firmware does all the masking and unmasking for us, no masking here. */
-static void msic_irq_unmask(struct irq_data *data) { }
-
-static void msic_irq_mask(struct irq_data *data) { }
-
-static struct irq_chip msic_irqchip = {
-	.name			= "MSIC-GPIO",
-	.irq_mask		= msic_irq_mask,
-	.irq_unmask		= msic_irq_unmask,
-	.irq_set_type		= msic_irq_type,
-	.irq_bus_lock		= msic_bus_lock,
-	.irq_bus_sync_unlock	= msic_bus_sync_unlock,
-};
-
-static void msic_gpio_irq_handler(struct irq_desc *desc)
-{
-	struct irq_data *data = irq_desc_get_irq_data(desc);
-	struct msic_gpio *mg = irq_data_get_irq_handler_data(data);
-	struct irq_chip *chip = irq_data_get_irq_chip(data);
-	struct intel_msic *msic = pdev_to_intel_msic(mg->pdev);
-	unsigned long pending;
-	int i;
-	int bitnr;
-	u8 pin;
-
-	for (i = 0; i < (mg->chip.ngpio / BITS_PER_BYTE); i++) {
-		intel_msic_irq_read(msic, INTEL_MSIC_GPIO0LVIRQ + i, &pin);
-		pending = pin;
-
-		for_each_set_bit(bitnr, &pending, BITS_PER_BYTE)
-			generic_handle_irq(mg->irq_base + i * BITS_PER_BYTE + bitnr);
-	}
-	chip->irq_eoi(data);
-}
-
-static int platform_msic_gpio_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct intel_msic_gpio_pdata *pdata = dev_get_platdata(dev);
-	struct msic_gpio *mg;
-	int irq = platform_get_irq(pdev, 0);
-	int retval;
-	int i;
-
-	if (irq < 0) {
-		dev_err(dev, "no IRQ line: %d\n", irq);
-		return irq;
-	}
-
-	if (!pdata || !pdata->gpio_base) {
-		dev_err(dev, "incorrect or missing platform data\n");
-		return -EINVAL;
-	}
-
-	mg = kzalloc(sizeof(*mg), GFP_KERNEL);
-	if (!mg)
-		return -ENOMEM;
-
-	dev_set_drvdata(dev, mg);
-
-	mg->pdev = pdev;
-	mg->irq = irq;
-	mg->irq_base = pdata->gpio_base + MSIC_GPIO_IRQ_OFFSET;
-	mg->chip.label = "msic_gpio";
-	mg->chip.direction_input = msic_gpio_direction_input;
-	mg->chip.direction_output = msic_gpio_direction_output;
-	mg->chip.get = msic_gpio_get;
-	mg->chip.set = msic_gpio_set;
-	mg->chip.to_irq = msic_gpio_to_irq;
-	mg->chip.base = pdata->gpio_base;
-	mg->chip.ngpio = MSIC_NUM_GPIO;
-	mg->chip.can_sleep = true;
-	mg->chip.parent = dev;
-
-	mutex_init(&mg->buslock);
-
-	retval = gpiochip_add_data(&mg->chip, mg);
-	if (retval) {
-		dev_err(dev, "Adding MSIC gpio chip failed\n");
-		goto err;
-	}
-
-	for (i = 0; i < mg->chip.ngpio; i++) {
-		irq_set_chip_data(i + mg->irq_base, mg);
-		irq_set_chip_and_handler(i + mg->irq_base,
-					 &msic_irqchip,
-					 handle_simple_irq);
-	}
-	irq_set_chained_handler_and_data(mg->irq, msic_gpio_irq_handler, mg);
-
-	return 0;
-err:
-	kfree(mg);
-	return retval;
-}
-
-static struct platform_driver platform_msic_gpio_driver = {
-	.driver = {
-		.name		= "msic_gpio",
-	},
-	.probe		= platform_msic_gpio_probe,
-};
-
-static int __init platform_msic_gpio_init(void)
-{
-	return platform_driver_register(&platform_msic_gpio_driver);
-}
-subsys_initcall(platform_msic_gpio_init);

drivers/gpu/drm/gma500/oaktrail_device.c

@@ -10,9 +10,6 @@
 #include <linux/dmi.h>
 #include <linux/module.h>
 
-#include <asm/intel-mid.h>
-#include <asm/intel_scu_ipc.h>
-
 #include <drm/drm.h>
 
 #include "intel_bios.h"

drivers/gpu/drm/gma500/psb_drv.h

@@ -386,6 +386,8 @@ struct psb_ops;
 
 #define PSB_NUM_PIPE		3
 
+struct intel_scu_ipc_dev;
+
 struct drm_psb_private {
 	struct drm_device *dev;
 	struct pci_dev *aux_pdev; /* Currently only used by mrst */
@@ -525,6 +527,7 @@ struct drm_psb_private {
 	 * Used for modifying backlight from
 	 * xrandr -- consider removing and using HAL instead
 	 */
+	struct intel_scu_ipc_dev *scu;
 	struct backlight_device *backlight_device;
 	struct drm_property *backlight_property;
 	bool backlight_enabled;

drivers/platform/olpc/olpc-ec.c

@@ -37,7 +37,6 @@ struct olpc_ec_priv {
 	struct mutex cmd_lock;
 
 	/* DCON regulator */
-	struct regulator_dev *dcon_rdev;
 	bool dcon_enabled;
 
 	/* Pending EC commands */
@@ -387,24 +386,26 @@ static int dcon_regulator_is_enabled(struct regulator_dev *rdev)
 	return ec->dcon_enabled ? 1 : 0;
 }
 
-static struct regulator_ops dcon_regulator_ops = {
+static const struct regulator_ops dcon_regulator_ops = {
 	.enable		= dcon_regulator_enable,
 	.disable	= dcon_regulator_disable,
 	.is_enabled	= dcon_regulator_is_enabled,
 };
 
 static const struct regulator_desc dcon_desc = {
-	.name	= "dcon",
-	.id	= 0,
-	.ops	= &dcon_regulator_ops,
-	.type	= REGULATOR_VOLTAGE,
-	.owner	= THIS_MODULE,
+	.name		= "dcon",
+	.id		= 0,
+	.ops		= &dcon_regulator_ops,
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.enable_time	= 25000,
 };
 
 static int olpc_ec_probe(struct platform_device *pdev)
 {
 	struct olpc_ec_priv *ec;
 	struct regulator_config config = { };
+	struct regulator_dev *regulator;
 	int err;
 
 	if (!ec_driver)
@@ -426,26 +427,26 @@ static int olpc_ec_probe(struct platform_device *pdev)
 
 	/* get the EC revision */
 	err = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ec->version, 1);
-	if (err) {
-		ec_priv = NULL;
-		kfree(ec);
-		return err;
-	}
+	if (err)
+		goto error;
 
 	config.dev = pdev->dev.parent;
 	config.driver_data = ec;
 	ec->dcon_enabled = true;
-	ec->dcon_rdev = devm_regulator_register(&pdev->dev, &dcon_desc,
-								&config);
-	if (IS_ERR(ec->dcon_rdev)) {
+	regulator = devm_regulator_register(&pdev->dev, &dcon_desc, &config);
+	if (IS_ERR(regulator)) {
 		dev_err(&pdev->dev, "failed to register DCON regulator\n");
-		err = PTR_ERR(ec->dcon_rdev);
-		kfree(ec);
-		return err;
+		err = PTR_ERR(regulator);
+		goto error;
 	}
 
 	ec->dbgfs_dir = olpc_ec_setup_debugfs();
 
+	return 0;
+
+error:
+	ec_priv = NULL;
+	kfree(ec);
 	return err;
 }
 

drivers/platform/surface/Kconfig

@@ -41,6 +41,42 @@ config SURFACE_3_POWER_OPREGION
 	  This driver provides support for ACPI operation
 	  region of the Surface 3 battery platform driver.
 
+config SURFACE_ACPI_NOTIFY
+	tristate "Surface ACPI Notify Driver"
+	depends on SURFACE_AGGREGATOR
+	help
+	  Surface ACPI Notify (SAN) driver for Microsoft Surface devices.
+
+	  This driver provides support for the ACPI interface (called SAN) of
+	  the Surface System Aggregator Module (SSAM) EC. This interface is used
+	  on 5th- and 6th-generation Microsoft Surface devices (including
+	  Surface Pro 5 and 6, Surface Book 2, Surface Laptops 1 and 2, and in
+	  reduced functionality on the Surface Laptop 3) to execute SSAM
+	  requests directly from ACPI code, as well as receive SSAM events and
+	  turn them into ACPI notifications. It essentially acts as a
+	  translation layer between the SSAM controller and ACPI.
+
+	  Specifically, this driver may be needed for battery status reporting,
+	  thermal sensor access, and real-time clock information, depending on
+	  the Surface device in question.
+
+config SURFACE_AGGREGATOR_CDEV
+	tristate "Surface System Aggregator Module User-Space Interface"
+	depends on SURFACE_AGGREGATOR
+	help
+	  Provides a misc-device interface to the Surface System Aggregator
+	  Module (SSAM) controller.
+
+	  This option provides a module (called surface_aggregator_cdev), that,
+	  when loaded, will add a client device (and its respective driver) to
+	  the SSAM controller. Said client device manages a misc-device
+	  interface (/dev/surface/aggregator), which can be used by user-space
+	  tools to directly communicate with the SSAM EC by sending requests and
+	  receiving the corresponding responses.
+
+	  The provided interface is intended for debugging and development only,
+	  and should not be used otherwise.
+
 config SURFACE_GPE
 	tristate "Surface GPE/Lid Support Driver"
 	depends on DMI
@@ -50,10 +86,31 @@ config SURFACE_GPE
 	  accordingly. It is required on those devices to allow wake-ups from
 	  suspend by opening the lid.
 
+config SURFACE_HOTPLUG
+	tristate "Surface Hot-Plug Driver"
+	depends on GPIOLIB
+	help
+	  Driver for out-of-band hot-plug event signaling on Microsoft Surface
+	  devices with hot-pluggable PCIe cards.
+
+	  This driver is used on Surface Book (2 and 3) devices with a
+	  hot-pluggable discrete GPU (dGPU). When not in use, the dGPU on those
+	  devices can enter D3cold, which prevents in-band (standard) PCIe
+	  hot-plug signaling. Thus, without this driver, detaching the base
+	  containing the dGPU will not correctly update the state of the
+	  corresponding PCIe device if it is in D3cold. This driver adds support
+	  for out-of-band hot-plug notifications, ensuring that the device state
+	  is properly updated even when the device in question is in D3cold.
+
+	  Select M or Y here, if you want to (fully) support hot-plugging of
+	  dGPU devices on the Surface Book 2 and/or 3 during D3cold.
+
 config SURFACE_PRO3_BUTTON
 	tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet"
 	depends on INPUT
 	help
 	  This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet.
 
+source "drivers/platform/surface/aggregator/Kconfig"
+
 endif # SURFACE_PLATFORMS

drivers/platform/surface/Makefile

@@ -7,5 +7,9 @@
 obj-$(CONFIG_SURFACE3_WMI)		+= surface3-wmi.o
 obj-$(CONFIG_SURFACE_3_BUTTON)		+= surface3_button.o
 obj-$(CONFIG_SURFACE_3_POWER_OPREGION)	+= surface3_power.o
+obj-$(CONFIG_SURFACE_ACPI_NOTIFY)	+= surface_acpi_notify.o
+obj-$(CONFIG_SURFACE_AGGREGATOR)	+= aggregator/
+obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV)	+= surface_aggregator_cdev.o
 obj-$(CONFIG_SURFACE_GPE)		+= surface_gpe.o
+obj-$(CONFIG_SURFACE_HOTPLUG)		+= surface_hotplug.o
 obj-$(CONFIG_SURFACE_PRO3_BUTTON)	+= surfacepro3_button.o

drivers/platform/surface/aggregator/Kconfig

+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+
+menuconfig SURFACE_AGGREGATOR
+	tristate "Microsoft Surface System Aggregator Module Subsystem and Drivers"
+	depends on SERIAL_DEV_BUS
+	select CRC_CCITT
+	help
+	  The Surface System Aggregator Module (Surface SAM or SSAM) is an
+	  embedded controller (EC) found on 5th- and later-generation Microsoft
+	  Surface devices (i.e. Surface Pro 5, Surface Book 2, Surface Laptop,
+	  and newer, with exception of Surface Go series devices).
+
+	  Depending on the device in question, this EC provides varying
+	  functionality, including:
+	  - EC access from ACPI via Surface ACPI Notify (5th- and 6th-generation)
+	  - battery status information (all devices)
+	  - thermal sensor access (all devices)
+	  - performance mode / cooling mode control (all devices)
+	  - clipboard detachment system control (Surface Book 2 and 3)
+	  - HID / keyboard input (Surface Laptops, Surface Book 3)
+
+	  This option controls whether the Surface SAM subsystem core will be
+	  built. This includes a driver for the Surface Serial Hub (SSH), which
+	  is the device responsible for the communication with the EC, and a
+	  basic kernel interface exposing the EC functionality to other client
+	  drivers, i.e. allowing them to make requests to the EC and receive
+	  events from it. Selecting this option alone will not provide any
+	  client drivers and therefore no functionality beyond the in-kernel
+	  interface. Said functionality is the responsibility of the respective
+	  client drivers.
+
+	  Note: While 4th-generation Surface devices also make use of a SAM EC,
+	  due to a difference in the communication interface of the controller,
+	  only 5th and later generations are currently supported. Specifically,
+	  devices using SAM-over-SSH are supported, whereas devices using
+	  SAM-over-HID, which is used on the 4th generation, are currently not
+	  supported.
+
+	  Choose m if you want to build the SAM subsystem core and SSH driver as
+	  module, y if you want to build it into the kernel and n if you don't
+	  want it at all.
+
+config SURFACE_AGGREGATOR_BUS
+	bool "Surface System Aggregator Module Bus"
+	depends on SURFACE_AGGREGATOR
+	default y
+	help
+	  Expands the Surface System Aggregator Module (SSAM) core driver by
+	  providing a dedicated bus and client-device type.
+
+	  This bus and device type are intended to provide and simplify support
+	  for non-platform and non-ACPI SSAM devices, i.e. SSAM devices that are
+	  not auto-detectable via the conventional means (e.g. ACPI).
+
+config SURFACE_AGGREGATOR_ERROR_INJECTION
+	bool "Surface System Aggregator Module Error Injection Capabilities"
+	depends on SURFACE_AGGREGATOR
+	depends on FUNCTION_ERROR_INJECTION
+	help
+	  Provides error-injection capabilities for the Surface System
+	  Aggregator Module subsystem and Surface Serial Hub driver.
+
+	  Specifically, exports error injection hooks to be used with the
+	  kernel's function error injection capabilities to simulate underlying
+	  transport and communication problems, such as invalid data sent to or
+	  received from the EC, dropped data, and communication timeouts.
+	  Intended for development and debugging.

drivers/platform/surface/aggregator/Makefile

+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+
+# For include/trace/define_trace.h to include trace.h
+CFLAGS_core.o = -I$(src)
+
+obj-$(CONFIG_SURFACE_AGGREGATOR) += surface_aggregator.o
+
+surface_aggregator-objs := core.o
+surface_aggregator-objs += ssh_parser.o
+surface_aggregator-objs += ssh_packet_layer.o
+surface_aggregator-objs += ssh_request_layer.o
+surface_aggregator-objs += controller.o
+
+ifeq ($(CONFIG_SURFACE_AGGREGATOR_BUS),y)
+surface_aggregator-objs += bus.o
+endif

drivers/platform/surface/aggregator/bus.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Surface System Aggregator Module bus and device integration.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_BUS_H
+#define _SURFACE_AGGREGATOR_BUS_H
+
+#include <linux/surface_aggregator/controller.h>
+
+#ifdef CONFIG_SURFACE_AGGREGATOR_BUS
+
+void ssam_controller_remove_clients(struct ssam_controller *ctrl);
+
+int ssam_bus_register(void);
+void ssam_bus_unregister(void);
+
+#else /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
+static inline void ssam_controller_remove_clients(struct ssam_controller *ctrl) {}
+static inline int ssam_bus_register(void) { return 0; }
+static inline void ssam_bus_unregister(void) {}
+
+#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */
+#endif /* _SURFACE_AGGREGATOR_BUS_H */

drivers/platform/surface/aggregator/controller.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Main SSAM/SSH controller structure and functionality.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_CONTROLLER_H
+#define _SURFACE_AGGREGATOR_CONTROLLER_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/serdev.h>
+#include <linux/spinlock.h>
+#include <linux/srcu.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/serial_hub.h>
+
+#include "ssh_request_layer.h"
+
+
+/* -- Safe counters. -------------------------------------------------------- */
+
+/**
+ * struct ssh_seq_counter - Safe counter for SSH sequence IDs.
+ * @value: The current counter value.
+ */
+struct ssh_seq_counter {
+	u8 value;
+};
+
+/**
+ * struct ssh_rqid_counter - Safe counter for SSH request IDs.
+ * @value: The current counter value.
+ */
+struct ssh_rqid_counter {
+	u16 value;
+};
+
+
+/* -- Event/notification system. -------------------------------------------- */
+
+/**
+ * struct ssam_nf_head - Notifier head for SSAM events.
+ * @srcu: The SRCU struct for synchronization.
+ * @head: List-head for notifier blocks registered under this head.
+ */
+struct ssam_nf_head {
+	struct srcu_struct srcu;
+	struct list_head head;
+};
+
+/**
+ * struct ssam_nf - Notifier callback- and activation-registry for SSAM events.
+ * @lock:     Lock guarding (de-)registration of notifier blocks. Note: This
+ *            lock does not need to be held for notifier calls, only
+ *            registration and deregistration.
+ * @refcount: The root of the RB-tree used for reference-counting enabled
+ *            events/notifications.
+ * @head:     The list of notifier heads for event/notification callbacks.
+ */
+struct ssam_nf {
+	struct mutex lock;
+	struct rb_root refcount;
+	struct ssam_nf_head head[SSH_NUM_EVENTS];
+};
+
+
+/* -- Event/async request completion system. -------------------------------- */
+
+struct ssam_cplt;
+
+/**
+ * struct ssam_event_item - Struct for event queuing and completion.
+ * @node:     The node in the queue.
+ * @rqid:     The request ID of the event.
+ * @ops:      Instance specific functions.
+ * @ops.free: Callback for freeing this event item.
+ * @event:    Actual event data.
+ */
+struct ssam_event_item {
+	struct list_head node;
+	u16 rqid;
+
+	struct {
+		void (*free)(struct ssam_event_item *event);
+	} ops;
+
+	struct ssam_event event;	/* must be last */
+};
+
+/**
+ * struct ssam_event_queue - Queue for completing received events.
+ * @cplt: Reference to the completion system on which this queue is active.
+ * @lock: The lock for any operation on the queue.
+ * @head: The list-head of the queue.
+ * @work: The &struct work_struct performing completion work for this queue.
+ */
+struct ssam_event_queue {
+	struct ssam_cplt *cplt;
+
+	spinlock_t lock;
+	struct list_head head;
+	struct work_struct work;
+};
+
+/**
+ * struct ssam_event_target - Set of queues for a single SSH target ID.
+ * @queue: The array of queues, one queue per event ID.
+ */
+struct ssam_event_target {
+	struct ssam_event_queue queue[SSH_NUM_EVENTS];
+};
+
+/**
+ * struct ssam_cplt - SSAM event/async request completion system.
+ * @dev:          The device with which this system is associated. Only used
+ *                for logging.
+ * @wq:           The &struct workqueue_struct on which all completion work
+ *                items are queued.
+ * @event:        Event completion management.
+ * @event.target: Array of &struct ssam_event_target, one for each target.
+ * @event.notif:  Notifier callbacks and event activation reference counting.
+ */
+struct ssam_cplt {
+	struct device *dev;
+	struct workqueue_struct *wq;
+
+	struct {
+		struct ssam_event_target target[SSH_NUM_TARGETS];
+		struct ssam_nf notif;
+	} event;
+};
+
+
+/* -- Main SSAM device structures. ------------------------------------------ */
+
+/**
+ * enum ssam_controller_state - State values for &struct ssam_controller.
+ * @SSAM_CONTROLLER_UNINITIALIZED:
+ *	The controller has not been initialized yet or has been deinitialized.
+ * @SSAM_CONTROLLER_INITIALIZED:
+ *	The controller is initialized, but has not been started yet.
+ * @SSAM_CONTROLLER_STARTED:
+ *	The controller has been started and is ready to use.
+ * @SSAM_CONTROLLER_STOPPED:
+ *	The controller has been stopped.
+ * @SSAM_CONTROLLER_SUSPENDED:
+ *	The controller has been suspended.
+ */
+enum ssam_controller_state {
+	SSAM_CONTROLLER_UNINITIALIZED,
+	SSAM_CONTROLLER_INITIALIZED,
+	SSAM_CONTROLLER_STARTED,
+	SSAM_CONTROLLER_STOPPED,
+	SSAM_CONTROLLER_SUSPENDED,
+};
+
+/**
+ * struct ssam_controller_caps - Controller device capabilities.
+ * @ssh_power_profile:             SSH power profile.
+ * @ssh_buffer_size:               SSH driver UART buffer size.
+ * @screen_on_sleep_idle_timeout:  SAM UART screen-on sleep idle timeout.
+ * @screen_off_sleep_idle_timeout: SAM UART screen-off sleep idle timeout.
+ * @d3_closes_handle:              SAM closes UART handle in D3.
+ *
+ * Controller and SSH device capabilities found in ACPI.
+ */
+struct ssam_controller_caps {
+	u32 ssh_power_profile;
+	u32 ssh_buffer_size;
+	u32 screen_on_sleep_idle_timeout;
+	u32 screen_off_sleep_idle_timeout;
+	u32 d3_closes_handle:1;
+};
+
+/**
+ * struct ssam_controller - SSAM controller device.
+ * @kref:  Reference count of the controller.
+ * @lock:  Main lock for the controller, used to guard state changes.
+ * @state: Controller state.
+ * @rtl:   Request transport layer for SSH I/O.
+ * @cplt:  Completion system for SSH/SSAM events and asynchronous requests.
+ * @counter:      Safe SSH message ID counters.
+ * @counter.seq:  Sequence ID counter.
+ * @counter.rqid: Request ID counter.
+ * @irq:          Wakeup IRQ resources.
+ * @irq.num:      The wakeup IRQ number.
+ * @irq.wakeup_enabled: Whether wakeup by IRQ is enabled during suspend.
+ * @caps: The controller device capabilities.
+ */
+struct ssam_controller {
+	struct kref kref;
+
+	struct rw_semaphore lock;
+	enum ssam_controller_state state;
+
+	struct ssh_rtl rtl;
+	struct ssam_cplt cplt;
+
+	struct {
+		struct ssh_seq_counter seq;
+		struct ssh_rqid_counter rqid;
+	} counter;
+
+	struct {
+		int num;
+		bool wakeup_enabled;
+	} irq;
+
+	struct ssam_controller_caps caps;
+};
+
+#define to_ssam_controller(ptr, member) \
+	container_of(ptr, struct ssam_controller, member)
+
+#define ssam_dbg(ctrl, fmt, ...)  rtl_dbg(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+#define ssam_info(ctrl, fmt, ...) rtl_info(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+#define ssam_warn(ctrl, fmt, ...) rtl_warn(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+#define ssam_err(ctrl, fmt, ...)  rtl_err(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+
+/**
+ * ssam_controller_receive_buf() - Provide input-data to the controller.
+ * @ctrl: The controller.
+ * @buf:  The input buffer.
+ * @n:    The number of bytes in the input buffer.
+ *
+ * Provide input data to be evaluated by the controller, which has been
+ * received via the lower-level transport.
+ *
+ * Return: Returns the number of bytes consumed, or, if the packet transport
+ * layer of the controller has been shut down, %-ESHUTDOWN.
+ */
+static inline
+int ssam_controller_receive_buf(struct ssam_controller *ctrl,
+				const unsigned char *buf, size_t n)
+{
+	return ssh_ptl_rx_rcvbuf(&ctrl->rtl.ptl, buf, n);
+}
+
+/**
+ * ssam_controller_write_wakeup() - Notify the controller that the underlying
+ * device has space available for data to be written.
+ * @ctrl: The controller.
+ */
+static inline void ssam_controller_write_wakeup(struct ssam_controller *ctrl)
+{
+	ssh_ptl_tx_wakeup_transfer(&ctrl->rtl.ptl);
+}
+
+int ssam_controller_init(struct ssam_controller *ctrl, struct serdev_device *s);
+int ssam_controller_start(struct ssam_controller *ctrl);
+void ssam_controller_shutdown(struct ssam_controller *ctrl);
+void ssam_controller_destroy(struct ssam_controller *ctrl);
+
+int ssam_notifier_disable_registered(struct ssam_controller *ctrl);
+void ssam_notifier_restore_registered(struct ssam_controller *ctrl);
+
+int ssam_irq_setup(struct ssam_controller *ctrl);
+void ssam_irq_free(struct ssam_controller *ctrl);
+int ssam_irq_arm_for_wakeup(struct ssam_controller *ctrl);
+void ssam_irq_disarm_wakeup(struct ssam_controller *ctrl);
+
+void ssam_controller_lock(struct ssam_controller *c);
+void ssam_controller_unlock(struct ssam_controller *c);
+
+int ssam_get_firmware_version(struct ssam_controller *ctrl, u32 *version);
+int ssam_ctrl_notif_display_off(struct ssam_controller *ctrl);
+int ssam_ctrl_notif_display_on(struct ssam_controller *ctrl);
+int ssam_ctrl_notif_d0_exit(struct ssam_controller *ctrl);
+int ssam_ctrl_notif_d0_entry(struct ssam_controller *ctrl);
+
+int ssam_controller_suspend(struct ssam_controller *ctrl);
+int ssam_controller_resume(struct ssam_controller *ctrl);
+
+int ssam_event_item_cache_init(void);
+void ssam_event_item_cache_destroy(void);
+
+#endif /* _SURFACE_AGGREGATOR_CONTROLLER_H */

drivers/platform/surface/aggregator/ssh_msgb.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SSH message builder functions.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_SSH_MSGB_H
+#define _SURFACE_AGGREGATOR_SSH_MSGB_H
+
+#include <asm/unaligned.h>
+#include <linux/types.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/serial_hub.h>
+
+/**
+ * struct msgbuf - Buffer struct to construct SSH messages.
+ * @begin: Pointer to the beginning of the allocated buffer space.
+ * @end:   Pointer to the end (one past last element) of the allocated buffer
+ *         space.
+ * @ptr:   Pointer to the first free element in the buffer.
+ */
+struct msgbuf {
+	u8 *begin;
+	u8 *end;
+	u8 *ptr;
+};
+
+/**
+ * msgb_init() - Initialize the given message buffer struct.
+ * @msgb: The buffer struct to initialize
+ * @ptr:  Pointer to the underlying memory by which the buffer will be backed.
+ * @cap:  Size of the underlying memory.
+ *
+ * Initialize the given message buffer struct using the provided memory as
+ * backing.
+ */
+static inline void msgb_init(struct msgbuf *msgb, u8 *ptr, size_t cap)
+{
+	msgb->begin = ptr;
+	msgb->end = ptr + cap;
+	msgb->ptr = ptr;
+}
+
+/**
+ * msgb_bytes_used() - Return the current number of bytes used in the buffer.
+ * @msgb: The message buffer.
+ */
+static inline size_t msgb_bytes_used(const struct msgbuf *msgb)
+{
+	return msgb->ptr - msgb->begin;
+}
+
+static inline void __msgb_push_u8(struct msgbuf *msgb, u8 value)
+{
+	*msgb->ptr = value;
+	msgb->ptr += sizeof(u8);
+}
+
+static inline void __msgb_push_u16(struct msgbuf *msgb, u16 value)
+{
+	put_unaligned_le16(value, msgb->ptr);
+	msgb->ptr += sizeof(u16);
+}
+
+/**
+ * msgb_push_u16() - Push a u16 value to the buffer.
+ * @msgb:  The message buffer.
+ * @value: The value to push to the buffer.
+ */
+static inline void msgb_push_u16(struct msgbuf *msgb, u16 value)
+{
+	if (WARN_ON(msgb->ptr + sizeof(u16) > msgb->end))
+		return;
+
+	__msgb_push_u16(msgb, value);
+}
+
+/**
+ * msgb_push_syn() - Push SSH SYN bytes to the buffer.
+ * @msgb: The message buffer.
+ */
+static inline void msgb_push_syn(struct msgbuf *msgb)
+{
+	msgb_push_u16(msgb, SSH_MSG_SYN);
+}
+
+/**
+ * msgb_push_buf() - Push raw data to the buffer.
+ * @msgb: The message buffer.
+ * @buf:  The data to push to the buffer.
+ * @len:  The length of the data to push to the buffer.
+ */
+static inline void msgb_push_buf(struct msgbuf *msgb, const u8 *buf, size_t len)
+{
+	msgb->ptr = memcpy(msgb->ptr, buf, len) + len;
+}
+
+/**
+ * msgb_push_crc() - Compute CRC and push it to the buffer.
+ * @msgb: The message buffer.
+ * @buf:  The data for which the CRC should be computed.
+ * @len:  The length of the data for which the CRC should be computed.
+ */
+static inline void msgb_push_crc(struct msgbuf *msgb, const u8 *buf, size_t len)
+{
+	msgb_push_u16(msgb, ssh_crc(buf, len));
+}
+
+/**
+ * msgb_push_frame() - Push a SSH message frame header to the buffer.
+ * @msgb: The message buffer
+ * @ty:   The type of the frame.
+ * @len:  The length of the payload of the frame.
+ * @seq:  The sequence ID of the frame/packet.
+ */
+static inline void msgb_push_frame(struct msgbuf *msgb, u8 ty, u16 len, u8 seq)
+{
+	u8 *const begin = msgb->ptr;
+
+	if (WARN_ON(msgb->ptr + sizeof(struct ssh_frame) > msgb->end))
+		return;
+
+	__msgb_push_u8(msgb, ty);	/* Frame type. */
+	__msgb_push_u16(msgb, len);	/* Frame payload length. */
+	__msgb_push_u8(msgb, seq);	/* Frame sequence ID. */
+
+	msgb_push_crc(msgb, begin, msgb->ptr - begin);
+}
+
+/**
+ * msgb_push_ack() - Push a SSH ACK frame to the buffer.
+ * @msgb: The message buffer
+ * @seq:  The sequence ID of the frame/packet to be ACKed.
+ */
+static inline void msgb_push_ack(struct msgbuf *msgb, u8 seq)
+{
+	/* SYN. */
+	msgb_push_syn(msgb);
+
+	/* ACK-type frame + CRC. */
+	msgb_push_frame(msgb, SSH_FRAME_TYPE_ACK, 0x00, seq);
+
+	/* Payload CRC (ACK-type frames do not have a payload). */
+	msgb_push_crc(msgb, msgb->ptr, 0);
+}
+
+/**
+ * msgb_push_nak() - Push a SSH NAK frame to the buffer.
+ * @msgb: The message buffer
+ */
+static inline void msgb_push_nak(struct msgbuf *msgb)
+{
+	/* SYN. */
+	msgb_push_syn(msgb);
+
+	/* NAK-type frame + CRC. */
+	msgb_push_frame(msgb, SSH_FRAME_TYPE_NAK, 0x00, 0x00);
+
+	/* Payload CRC (ACK-type frames do not have a payload). */
+	msgb_push_crc(msgb, msgb->ptr, 0);
+}
+
+/**
+ * msgb_push_cmd() - Push a SSH command frame with payload to the buffer.
+ * @msgb: The message buffer.
+ * @seq:  The sequence ID (SEQ) of the frame/packet.
+ * @rqid: The request ID (RQID) of the request contained in the frame.
+ * @rqst: The request to wrap in the frame.
+ */
+static inline void msgb_push_cmd(struct msgbuf *msgb, u8 seq, u16 rqid,
+				 const struct ssam_request *rqst)
+{
+	const u8 type = SSH_FRAME_TYPE_DATA_SEQ;
+	u8 *cmd;
+
+	/* SYN. */
+	msgb_push_syn(msgb);
+
+	/* Command frame + CRC. */
+	msgb_push_frame(msgb, type, sizeof(struct ssh_command) + rqst->length, seq);
+
+	/* Frame payload: Command struct + payload. */
+	if (WARN_ON(msgb->ptr + sizeof(struct ssh_command) > msgb->end))
+		return;
+
+	cmd = msgb->ptr;
+
+	__msgb_push_u8(msgb, SSH_PLD_TYPE_CMD);		/* Payload type. */
+	__msgb_push_u8(msgb, rqst->target_category);	/* Target category. */
+	__msgb_push_u8(msgb, rqst->target_id);		/* Target ID (out). */
+	__msgb_push_u8(msgb, 0x00);			/* Target ID (in). */
+	__msgb_push_u8(msgb, rqst->instance_id);	/* Instance ID. */
+	__msgb_push_u16(msgb, rqid);			/* Request ID. */
+	__msgb_push_u8(msgb, rqst->command_id);		/* Command ID. */
+
+	/* Command payload. */
+	msgb_push_buf(msgb, rqst->payload, rqst->length);
+
+	/* CRC for command struct + payload. */
+	msgb_push_crc(msgb, cmd, msgb->ptr - cmd);
+}
+
+#endif /* _SURFACE_AGGREGATOR_SSH_MSGB_H */

drivers/platform/surface/aggregator/ssh_packet_layer.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SSH packet transport layer.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H
+#define _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H
+
+#include <linux/atomic.h>
+#include <linux/kfifo.h>
+#include <linux/ktime.h>
+#include <linux/list.h>
+#include <linux/serdev.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/serial_hub.h>
+#include "ssh_parser.h"
+
+/**
+ * enum ssh_ptl_state_flags - State-flags for &struct ssh_ptl.
+ *
+ * @SSH_PTL_SF_SHUTDOWN_BIT:
+ *	Indicates that the packet transport layer has been shut down or is
+ *	being shut down and should not accept any new packets/data.
+ */
+enum ssh_ptl_state_flags {
+	SSH_PTL_SF_SHUTDOWN_BIT,
+};
+
+/**
+ * struct ssh_ptl_ops - Callback operations for packet transport layer.
+ * @data_received: Function called when a data-packet has been received. Both,
+ *                 the packet layer on which the packet has been received and
+ *                 the packet's payload data are provided to this function.
+ */
+struct ssh_ptl_ops {
+	void (*data_received)(struct ssh_ptl *p, const struct ssam_span *data);
+};
+
+/**
+ * struct ssh_ptl - SSH packet transport layer.
+ * @serdev:        Serial device providing the underlying data transport.
+ * @state:         State(-flags) of the transport layer.
+ * @queue:         Packet submission queue.
+ * @queue.lock:    Lock for modifying the packet submission queue.
+ * @queue.head:    List-head of the packet submission queue.
+ * @pending:       Set/list of pending packets.
+ * @pending.lock:  Lock for modifying the pending set.
+ * @pending.head:  List-head of the pending set/list.
+ * @pending.count: Number of currently pending packets.
+ * @tx:            Transmitter subsystem.
+ * @tx.running:    Flag indicating (desired) transmitter thread state.
+ * @tx.thread:     Transmitter thread.
+ * @tx.thread_cplt_tx:  Completion for transmitter thread waiting on transfer.
+ * @tx.thread_cplt_pkt: Completion for transmitter thread waiting on packets.
+ * @tx.packet_wq:  Waitqueue-head for packet transmit completion.
+ * @rx:            Receiver subsystem.
+ * @rx.thread:     Receiver thread.
+ * @rx.wq:         Waitqueue-head for receiver thread.
+ * @rx.fifo:       Buffer for receiving data/pushing data to receiver thread.
+ * @rx.buf:        Buffer for evaluating data on receiver thread.
+ * @rx.blocked:    List of recent/blocked sequence IDs to detect retransmission.
+ * @rx.blocked.seqs:   Array of blocked sequence IDs.
+ * @rx.blocked.offset: Offset indicating where a new ID should be inserted.
+ * @rtx_timeout:   Retransmission timeout subsystem.
+ * @rtx_timeout.lock:    Lock for modifying the retransmission timeout reaper.
+ * @rtx_timeout.timeout: Timeout interval for retransmission.
+ * @rtx_timeout.expires: Time specifying when the reaper work is next scheduled.
+ * @rtx_timeout.reaper:  Work performing timeout checks and subsequent actions.
+ * @ops:           Packet layer operations.
+ */
+struct ssh_ptl {
+	struct serdev_device *serdev;
+	unsigned long state;
+
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+	} queue;
+
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+		atomic_t count;
+	} pending;
+
+	struct {
+		atomic_t running;
+		struct task_struct *thread;
+		struct completion thread_cplt_tx;
+		struct completion thread_cplt_pkt;
+		struct wait_queue_head packet_wq;
+	} tx;
+
+	struct {
+		struct task_struct *thread;
+		struct wait_queue_head wq;
+		struct kfifo fifo;
+		struct sshp_buf buf;
+
+		struct {
+			u16 seqs[8];
+			u16 offset;
+		} blocked;
+	} rx;
+
+	struct {
+		spinlock_t lock;
+		ktime_t timeout;
+		ktime_t expires;
+		struct delayed_work reaper;
+	} rtx_timeout;
+
+	struct ssh_ptl_ops ops;
+};
+
+#define __ssam_prcond(func, p, fmt, ...)		\
+	do {						\
+		typeof(p) __p = (p);			\
+							\
+		if (__p)				\
+			func(__p, fmt, ##__VA_ARGS__);	\
+	} while (0)
+
+#define ptl_dbg(p, fmt, ...)  dev_dbg(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_info(p, fmt, ...) dev_info(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_warn(p, fmt, ...) dev_warn(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_err(p, fmt, ...)  dev_err(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_dbg_cond(p, fmt, ...) __ssam_prcond(ptl_dbg, p, fmt, ##__VA_ARGS__)
+
+#define to_ssh_ptl(ptr, member) \
+	container_of(ptr, struct ssh_ptl, member)
+
+int ssh_ptl_init(struct ssh_ptl *ptl, struct serdev_device *serdev,
+		 struct ssh_ptl_ops *ops);
+
+void ssh_ptl_destroy(struct ssh_ptl *ptl);
+
+/**
+ * ssh_ptl_get_device() - Get device associated with packet transport layer.
+ * @ptl: The packet transport layer.
+ *
+ * Return: Returns the device on which the given packet transport layer builds
+ * upon.
+ */
+static inline struct device *ssh_ptl_get_device(struct ssh_ptl *ptl)
+{
+	return ptl->serdev ? &ptl->serdev->dev : NULL;
+}
+
+int ssh_ptl_tx_start(struct ssh_ptl *ptl);
+int ssh_ptl_tx_stop(struct ssh_ptl *ptl);
+int ssh_ptl_rx_start(struct ssh_ptl *ptl);
+int ssh_ptl_rx_stop(struct ssh_ptl *ptl);
+void ssh_ptl_shutdown(struct ssh_ptl *ptl);
+
+int ssh_ptl_submit(struct ssh_ptl *ptl, struct ssh_packet *p);
+void ssh_ptl_cancel(struct ssh_packet *p);
+
+int ssh_ptl_rx_rcvbuf(struct ssh_ptl *ptl, const u8 *buf, size_t n);
+
+/**
+ * ssh_ptl_tx_wakeup_transfer() - Wake up packet transmitter thread for
+ * transfer.
+ * @ptl: The packet transport layer.
+ *
+ * Wakes up the packet transmitter thread, notifying it that the underlying
+ * transport has more space for data to be transmitted. If the packet
+ * transport layer has been shut down, calls to this function will be ignored.
+ */
+static inline void ssh_ptl_tx_wakeup_transfer(struct ssh_ptl *ptl)
+{
+	if (test_bit(SSH_PTL_SF_SHUTDOWN_BIT, &ptl->state))
+		return;
+
+	complete(&ptl->tx.thread_cplt_tx);
+}
+
+void ssh_packet_init(struct ssh_packet *packet, unsigned long type,
+		     u8 priority, const struct ssh_packet_ops *ops);
+
+int ssh_ctrl_packet_cache_init(void);
+void ssh_ctrl_packet_cache_destroy(void);
+
+#endif /* _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H */

drivers/platform/surface/surface3-wmi.c

@@ -57,12 +57,16 @@ static DEFINE_MUTEX(s3_wmi_lock);
 static int s3_wmi_query_block(const char *guid, int instance, int *ret)
 {
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj = NULL;
 	acpi_status status;
-	union acpi_object *obj;
 	int error = 0;
 
 	mutex_lock(&s3_wmi_lock);
 	status = wmi_query_block(guid, instance, &output);
+	if (ACPI_FAILURE(status)) {
+		error = -EIO;
+		goto out_free_unlock;
+	}
 
 	obj = output.pointer;
 

drivers/platform/x86/Makefile

@@ -9,7 +9,6 @@ obj-$(CONFIG_ACPI_WMI)		+= wmi.o
 obj-$(CONFIG_WMI_BMOF)		+= wmi-bmof.o
 
 # WMI drivers
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
 obj-$(CONFIG_HUAWEI_WMI)		+= huawei-wmi.o
 obj-$(CONFIG_INTEL_WMI_SBL_FW_UPDATE)	+= intel-wmi-sbl-fw-update.o
 obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
@@ -37,20 +36,7 @@ obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
 obj-$(CONFIG_EEEPC_WMI)		+= eeepc-wmi.o
 
 # Dell
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_X86_PLATFORM_DRIVERS_DELL)		+= dell/
 
 # Fujitsu
 obj-$(CONFIG_AMILO_RFKILL)	+= amilo-rfkill.o
@@ -137,8 +123,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 # Intel PMIC / PMC / P-Unit devices
 obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)	+= intel_bxtwc_tmu.o
 obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
-obj-$(CONFIG_INTEL_MFLD_THERMAL)	+= intel_mid_thermal.o
-obj-$(CONFIG_INTEL_MID_POWER_BUTTON)	+= intel_mid_powerbtn.o
 obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
 obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core.o intel_pmc_core_pltdrv.o
 obj-$(CONFIG_INTEL_PMT_CLASS)		+= intel_pmt_class.o
@@ -148,6 +132,7 @@ obj-$(CONFIG_INTEL_PUNIT_IPC)		+= intel_punit_ipc.o
 obj-$(CONFIG_INTEL_SCU_IPC)		+= intel_scu_ipc.o
 obj-$(CONFIG_INTEL_SCU_PCI)		+= intel_scu_pcidrv.o
 obj-$(CONFIG_INTEL_SCU_PLATFORM)	+= intel_scu_pltdrv.o
+obj-$(CONFIG_INTEL_SCU_WDT)		+= intel_scu_wdt.o
 obj-$(CONFIG_INTEL_SCU_IPC_UTIL)	+= intel_scu_ipcutil.o
 obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_core.o \
 					   intel_telemetry_pltdrv.o \

drivers/platform/x86/acer-wmi.c

@@ -30,7 +30,6 @@
 #include <linux/input/sparse-keymap.h>
 #include <acpi/video.h>
 
-ACPI_MODULE_NAME(KBUILD_MODNAME);
 MODULE_AUTHOR("Carlos Corbacho");
 MODULE_DESCRIPTION("Acer Laptop WMI Extras Driver");
 MODULE_LICENSE("GPL");
@@ -1605,7 +1604,8 @@ static void acer_kbd_dock_get_initial_state(void)
 
 	status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input_buf, &output_buf);
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Error getting keyboard-dock initial status"));
+		pr_err("Error getting keyboard-dock initial status: %s\n",
+		       acpi_format_exception(status));
 		return;
 	}
 

drivers/platform/x86/intel-uncore-frequency.c

@@ -377,6 +377,7 @@ static const struct x86_cpu_id intel_uncore_cpu_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	NULL),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,	NULL),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, NULL),
 	{}
 };
 

drivers/platform/x86/intel_scu_ipc.c

@@ -75,7 +75,7 @@ struct intel_scu_ipc_dev {
 #define IPC_READ_BUFFER		0x90
 
 /* Timeout in jiffies */
-#define IPC_TIMEOUT		(3 * HZ)
+#define IPC_TIMEOUT		(5 * HZ)
 
 static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */
 static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */