bcma: implement BCM4331 workaround for external PA lines

We need to disable ext. PA lines for reading SPROM. It's disabled by
default, but this patch allows using bcma after loading wl, which leaves
workaround enabled.

Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/bcma/driver_chipcommon_pmu.c

@@ -90,6 +90,24 @@ void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
 	}
 }
 
+/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 val;
+
+	val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL);
+	if (enable) {
+		val |= BCMA_CHIPCTL_4331_EXTPA_EN;
+		if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
+			val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+	} else {
+		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
+		val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+	}
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
+}
+
 void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
@@ -99,7 +117,7 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
 		break;
 	case 0x4331:
-		pr_err("Enabling Ext PA lines not implemented\n");
+		/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
 		break;
 	case 43224:
 		if (bus->chipinfo.rev == 0) {

drivers/bcma/sprom.c

@@ -152,6 +152,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
 	if (!sprom)
 		return -ENOMEM;
 
+	if (bus->chipinfo.id == 0x4331)
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
 	/* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
 	 * According to brcm80211 this applies to cards with PCIe rev >= 6
 	 * TODO: understand this condition and use it */
@@ -159,6 +162,9 @@ int bcma_sprom_get(struct bcma_bus *bus)
 		BCMA_CC_SPROM_PCIE6;
 	bcma_sprom_read(bus, offset, sprom);
 
+	if (bus->chipinfo.id == 0x4331)
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
 	err = bcma_sprom_valid(sprom);
 	if (err)
 		goto out;

include/linux/bcma/bcma_driver_chipcommon.h

@@ -283,6 +283,22 @@
 #define BCMA_CC_PPL_PCHI_OFF		5
 #define BCMA_CC_PPL_PCHI_MASK		0x0000003f
 
+/* BCM4331 ChipControl numbers. */
+#define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
+#define BCMA_CHIPCTL_4331_EXT_LNA		BIT(2)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15	BIT(3)	/* sprom/gpio13-15 mux */
+#define BCMA_CHIPCTL_4331_EXTPA_EN		BIT(4)	/* 0 ext pa disable, 1 ext pa enabled */
+#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS	BIT(5)	/* set drive out GPIO_CLK on sprom_cs pin */
+#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS	BIT(6)	/* use sprom_cs pin as PCIE mdio interface */
+#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5	BIT(7)	/* aband extpa will be at gpio2/5 and sprom_dout */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN	BIT(8)	/* override core control on pipe_AuxClkEnable */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
+#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
+#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
+#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
+
 /* Data for the PMU, if available.
  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
  */
@@ -342,6 +358,8 @@ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
 extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
 extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
 
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
 extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
 					  u32 ticks);