ARM: at91: enable on flash bbt for Atmel Reference and DT boards

Enable it on Calao board too as they are in DT too.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

arch/arm/mach-at91/board-dt.c

@@ -48,6 +48,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {

arch/arm/mach-at91/board-qil-a9260.c

@@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-rm9200dk.c

@@ -151,6 +151,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 	.rdy_pin	= AT91_PIN_PC2,
 	.enable_pin	= -EINVAL,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= dk_nand_partition,
 	.num_parts	= ARRAY_SIZE(dk_nand_partition),
 };

arch/arm/mach-at91/board-sam9260ek.c

@@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9261ek.c

@@ -188,6 +188,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9263ek.c

@@ -188,6 +188,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9g20ek.c

@@ -167,6 +167,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.enable_pin	= AT91_PIN_PC14,
 	.det_pin	= -EINVAL,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -149,6 +149,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.enable_pin	= AT91_PIN_PC14,
 	.det_pin	= -EINVAL,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-sam9rlek.c

@@ -95,6 +95,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PD17,
 	.enable_pin	= AT91_PIN_PB6,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

arch/arm/mach-at91/board-usb-a926x.c

@@ -199,6 +199,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.ecc_mode	= NAND_ECC_SOFT,
+	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };