Commit 986499b1 authored by Lorenzo Colitti's avatar Lorenzo Colitti Committed by Felipe Balbi

usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above.

Currently, SuperSpeed NCM gadgets report a speed of 851 Mbps
in USB_CDC_NOTIFY_SPEED_CHANGE. But the calculation appears to
assume 16 packets per microframe, and USB 3 and above no longer
use microframes.

Maximum speed is actually much higher. On a direct connection,
theoretical throughput is at most 3.86 Gbps for gen1x1 and
9.36 Gbps for gen2x1, and I have seen gadget->host iperf
throughput of >2 Gbps for gen1x1 and >4 Gbps for gen2x1.

Unfortunately the ConnectionSpeedChange defined in the CDC spec
only uses 32-bit values, so we can't report accurate numbers for
10Gbps and above. So, report 3.75Gbps for SuperSpeed (which is
roughly maximum theoretical performance) and 4.25Gbps for
SuperSpeed Plus (which is close to the maximum that we can report
in a 32-bit unsigned integer).

This results in:

[50879.191272] cdc_ncm 2-2:1.0 enx228b127e050c: renamed from usb0
[50879.234778] cdc_ncm 2-2:1.0 enx228b127e050c: 3750 mbit/s downlink 3750 mbit/s uplink

on SuperSpeed and:

[50798.434527] cdc_ncm 8-2:1.0 enx228b127e050c: renamed from usb0
[50798.524278] cdc_ncm 8-2:1.0 enx228b127e050c: 4250 mbit/s downlink 4250 mbit/s uplink

on SuperSpeed Plus.

Fixes: 16501138 ("usb: gadget: f_ncm: add SuperSpeed descriptors for CDC NCM")
Reviewed-by: default avatarMaciej Żenczykowski <maze@google.com>
Signed-off-by: default avatarLorenzo Colitti <lorenzo@google.com>
Signed-off-by: default avatarFelipe Balbi <balbi@kernel.org>
parent b21cf937
......@@ -85,8 +85,10 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
/* peak (theoretical) bulk transfer rate in bits-per-second */
static inline unsigned ncm_bitrate(struct usb_gadget *g)
{
if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
return 13 * 1024 * 8 * 1000 * 8;
if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
return 4250000000U;
else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
return 3750000000U;
else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
return 13 * 512 * 8 * 1000 * 8;
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment