Commit 988cbb15 authored by Mitch Williams's avatar Mitch Williams Committed by Greg Kroah-Hartman

PCI: Flush MSI-X table writes

This patch fixes a kernel bug which is triggered when using the
irqbalance daemon with MSI-X hardware.

Because both MSI-X interrupt messages and MSI-X table writes are posted,
it's possible for them to cross while in-flight.  This results in
interrupts being received long after the kernel thinks they're disabled,
and in interrupts being sent to stale vectors after rebalancing.

This patch performs a read flush after writes to the MSI-X table for
mask and unmask operations.  Since the SMP affinity is set while
the interrupt is masked, and since it's unmasked immediately after,
no additional flushes are required in the various affinity setting
routines.

This patch has been validated with (unreleased) network hardware which
uses MSI-X.

Revised with input from Eric Biederman.
Signed-off-by: default avatarMitch Williams <mitch.a.williams@intel.com>
Acked-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent dc87c398
......@@ -68,6 +68,29 @@ static void msix_set_enable(struct pci_dev *dev, int enable)
}
}
static void msix_flush_writes(unsigned int irq)
{
struct msi_desc *entry;
entry = get_irq_msi(irq);
BUG_ON(!entry || !entry->dev);
switch (entry->msi_attrib.type) {
case PCI_CAP_ID_MSI:
/* nothing to do */
break;
case PCI_CAP_ID_MSIX:
{
int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
readl(entry->mask_base + offset);
break;
}
default:
BUG();
break;
}
}
static void msi_set_mask_bit(unsigned int irq, int flag)
{
struct msi_desc *entry;
......@@ -187,11 +210,13 @@ void write_msi_msg(unsigned int irq, struct msi_msg *msg)
void mask_msi_irq(unsigned int irq)
{
msi_set_mask_bit(irq, 1);
msix_flush_writes(irq);
}
void unmask_msi_irq(unsigned int irq)
{
msi_set_mask_bit(irq, 0);
msix_flush_writes(irq);
}
static int msi_free_irq(struct pci_dev* dev, int irq);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment