Skip to content

L
linux
Commit 989e7e35 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'imx-dt64-5.14' of... 

Merge tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree chagnes for 5.14:

- New board support: i.MX8MM Gateworks GW7901 board.
- Add SPBA bus description for i.MX8MN and i.MX8MM.
- A series of update on imx8mq-nitrogen board to add USB OTG/Host and
  LT8912 MIPI-DSI to HDMI support.
- Correct enet clock description for i.MX8 Connection Subsystem.
- A couple of patches from Heiko Schocher to add FlexSPI device for
  i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som.
- Remove the reference to audio IPG clock on i.MX8MP.
- Enable EQOS Ethernet and PMIC device support for imx8mp-evk.
- Disable USB over-current on imx8mm-evk and imx8mn-evk.
- Add dma-ranges description for i.MX8MM and i.MX8MN SoC.
- Add PCIe clock description for i.MX8MQ SoC.
- Enable PCIe support on freeway board.
- Enable OPTEE support on ls1028a-rdb board.

* tag 'imx-dt64-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
  arm64: dts: imx8mn-evk: disable over current for usb
  arm64: dts: imx8mm-evk: disable over current for usb1
  arm64: dts: freescale: Separate each group of data in the property 'reg'
  arm64: dts: imx8: conn: fix enet clock setting
  arm64: dts: imx8mq: assign PCIe clocks
  arm64: dts: imx8mn: specify dma-ranges
  arm64: dts: imx8mm: specify dma-ranges
  arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges
  arm64: dts: imx8mn-beacon-som: Assign PMIC clock
  arm64: dts: ls208xa: remove bus-num from dspi node
  arm64: dts: ls1012a: enable PCIe on freeway board
  arm64: dts: imx8mp-evk: enable EQOS ethernet
  arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp
  arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
  arm64: dts: imx8mm: Add spba1 and spba2 buses
  arm64: dts: imx8mn: Add spba1 bus
  arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI
  arm64: dts: imx8mq-nitrogen: add USB HOST support
  arm64: dts: imx8mq-nitrogen: add USB OTG support
  arm64: dts: imx8mp-phycore-som: enable spi nor
  ...

Link: https://lore.kernel.org/r/20210613082544.16067-5-shawnguo@kernel.orgSigned-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 970d180b 21cc1f22
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1789 additions and 340 deletions
arch/arm64/boot/dts/freescale/Makefile
View file @ 989e7e35
......@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
......
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
View file @ 989e7e35
......@@ -24,6 +24,10 @@ &i2c0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&qspi {
status = "okay";
......
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
View file @ 989e7e35
......@@ -238,35 +238,35 @@ rtic@60000 {
"fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x60000 0x100 0x60e00 0x18>;
reg = <0x60000 0x100>, <0x60e00 0x18>;
ranges = <0x0 0x60100 0x500>;
rtic_a: rtic-a@0 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20 0x100 0x100>;
reg = <0x00 0x20>, <0x100 0x100>;
};
rtic_b: rtic-b@20 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20 0x200 0x100>;
reg = <0x20 0x20>, <0x200 0x100>;
};
rtic_c: rtic-c@40 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20 0x300 0x100>;
reg = <0x40 0x20>, <0x300 0x100>;
};
rtic_d: rtic-d@60 {
compatible = "fsl,sec-v5.4-rtic-memory",
"fsl,sec-v5.0-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20 0x400 0x100>;
reg = <0x60 0x20>, <0x400 0x100>;
};
};
};
......@@ -522,8 +522,8 @@ msi: msi-controller1@1572000 {
pcie1: pcie@3400000 {
compatible = "fsl,ls1012a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 118 0x4>, /* controller interrupt */
<0 117 0x4>; /* PME interrupt */
......
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
View file @ 989e7e35
......@@ -275,6 +275,10 @@ &mscc_felix_port4 {
status = "okay";
};
&optee {
status = "okay";
};
&sai4 {
status = "okay";
};
......
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View file @ 989e7e35
......@@ -88,7 +88,7 @@ dpclk: clock-controller@f1f0000 {
};
firmware {
optee {
optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
status = "disabled";
......@@ -617,8 +617,8 @@ sata: sata@3200000 {
pcie1: pcie@3400000 {
compatible = "fsl,ls1028a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x80 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x80 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
......@@ -644,8 +644,8 @@ pcie1: pcie@3400000 {
pcie2: pcie@3500000 {
compatible = "fsl,ls1028a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x88 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x88 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
......@@ -990,19 +990,19 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
msi-map = <0 &its 0x17 0xe>;
iommu-map = <0 &smmu 0x17 0xe>;
/* PF0-6 BAR0 - non-prefetchable memory */
ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000
ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000
/* PF0-6 BAR2 - prefetchable memory */
0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000
0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000
/* PF0: VF0-1 BAR0 - non-prefetchable memory */
0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000
0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000
/* PF0: VF0-1 BAR2 - prefetchable memory */
0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000
0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000
/* PF1: VF0-1 BAR0 - non-prefetchable memory */
0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000
0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000
/* PF1: VF0-1 BAR2 - prefetchable memory */
0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000
0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000
/* BAR4 (PF5) - non-prefetchable memory */
0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>;
0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>;
enetc_port0: ethernet@0,0 {
compatible = "fsl,enetc";
......
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
View file @ 989e7e35
......@@ -869,8 +869,8 @@ msi3: msi-controller3@1573000 {
pcie1: pcie@3400000 {
compatible = "fsl,ls1043a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 118 0x4>, /* controller interrupt */
<0 117 0x4>; /* PME interrupt */
......@@ -895,8 +895,8 @@ pcie1: pcie@3400000 {
pcie2: pcie@3500000 {
compatible = "fsl,ls1043a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 128 0x4>,
<0 127 0x4>;
......@@ -921,8 +921,8 @@ pcie2: pcie@3500000 {
pcie3: pcie@3600000 {
compatible = "fsl,ls1043a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 162 0x4>,
<0 161 0x4>;
......
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
View file @ 989e7e35
......@@ -773,8 +773,8 @@ msi3: msi-controller@15a0000 {
pcie1: pcie@3400000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
......@@ -799,8 +799,8 @@ pcie1: pcie@3400000 {
pcie_ep1: pcie_ep@3400000 {
compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
reg = <0x00 0x03400000 0x0 0x00100000
0x40 0x00000000 0x8 0x00000000>;
reg = <0x00 0x03400000 0x0 0x00100000>,
<0x40 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <8>;
......@@ -809,8 +809,8 @@ pcie_ep1: pcie_ep@3400000 {
pcie2: pcie@3500000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
......@@ -835,8 +835,8 @@ pcie2: pcie@3500000 {
pcie_ep2: pcie_ep@3500000 {
compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
reg = <0x00 0x03500000 0x0 0x00100000
0x48 0x00000000 0x8 0x00000000>;
reg = <0x00 0x03500000 0x0 0x00100000>,
<0x48 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <8>;
......@@ -845,8 +845,8 @@ pcie_ep2: pcie_ep@3500000 {
pcie3: pcie@3600000 {
compatible = "fsl,ls1046a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
......@@ -871,8 +871,8 @@ pcie3: pcie@3600000 {
pcie_ep3: pcie_ep@3600000 {
compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
reg = <0x00 0x03600000 0x0 0x00100000
0x50 0x00000000 0x8 0x00000000>;
reg = <0x00 0x03600000 0x0 0x00100000>,
<0x50 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <8>;
......
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
View file @ 989e7e35
......@@ -536,8 +536,8 @@ sec_jr3: jr@40000 {
pcie1: pcie@3400000 {
compatible = "fsl,ls1088a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x20 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x20 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
interrupt-names = "aer";
......@@ -562,8 +562,8 @@ pcie1: pcie@3400000 {
pcie_ep1: pcie-ep@3400000 {
compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
reg = <0x00 0x03400000 0x0 0x00100000
0x20 0x00000000 0x8 0x00000000>;
reg = <0x00 0x03400000 0x0 0x00100000>,
<0x20 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <24>;
num-ob-windows = <256>;
......@@ -573,8 +573,8 @@ pcie_ep1: pcie-ep@3400000 {
pcie2: pcie@3500000 {
compatible = "fsl,ls1088a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x28 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x28 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
interrupt-names = "aer";
......@@ -599,8 +599,8 @@ pcie2: pcie@3500000 {
pcie_ep2: pcie-ep@3500000 {
compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
reg = <0x00 0x03500000 0x0 0x00100000
0x28 0x00000000 0x8 0x00000000>;
reg = <0x00 0x03500000 0x0 0x00100000>,
<0x28 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <6>;
......@@ -609,8 +609,8 @@ pcie_ep2: pcie-ep@3500000 {
pcie3: pcie@3600000 {
compatible = "fsl,ls1088a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x30 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x30 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
interrupt-names = "aer";
......@@ -635,8 +635,8 @@ pcie3: pcie@3600000 {
pcie_ep3: pcie-ep@3600000 {
compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
reg = <0x00 0x03600000 0x0 0x00100000
0x30 0x00000000 0x8 0x00000000>;
reg = <0x00 0x03600000 0x0 0x00100000>,
<0x30 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
num-ib-windows = <6>;
num-ob-windows = <6>;
......
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
View file @ 989e7e35
......@@ -120,32 +120,32 @@ CPU_PW20: cpu-pw20 {
};
&pcie1 {
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x10 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x10 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
&pcie2 {
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x12 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x12 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
&pcie3 {
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x14 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x14 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
&pcie4 {
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x16 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
<0x16 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
......
arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
View file @ 989e7e35
......@@ -121,8 +121,8 @@ CPU_PW20: cpu-pw20 {
&pcie1 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x20 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x20 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
......@@ -130,8 +130,8 @@ &pcie1 {
&pcie2 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x28 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x28 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
......@@ -139,8 +139,8 @@ &pcie2 {
&pcie3 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x30 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x30 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
......@@ -148,8 +148,8 @@ &pcie3 {
&pcie4 {
compatible = "fsl,ls2088a-pcie";
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x38 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
<0x38 0x00000000 0x0 0x00002000>; /* configuration space */
ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
......
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
View file @ 989e7e35
......@@ -929,7 +929,6 @@ dspi: spi@2100000 {
QORIQ_CLK_PLL_DIV(4)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <0>;
};
esdhc: esdhc@2140000 {
......
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
View file @ 989e7e35
......@@ -1089,8 +1089,8 @@ sata3: sata@3230000 {
pcie1: pcie@3400000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x80 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
<0x80 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
......@@ -1117,8 +1117,8 @@ pcie1: pcie@3400000 {
pcie2: pcie@3500000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x88 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
<0x88 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
......@@ -1145,8 +1145,8 @@ pcie2: pcie@3500000 {
pcie3: pcie@3600000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x90 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
<0x90 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
......@@ -1173,8 +1173,8 @@ pcie3: pcie@3600000 {
pcie4: pcie@3700000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x98 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
<0x98 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
......@@ -1201,8 +1201,8 @@ pcie4: pcie@3700000 {
pcie5: pcie@3800000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */
0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */
<0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
......@@ -1229,8 +1229,8 @@ pcie5: pcie@3800000 {
pcie6: pcie@3900000 {
compatible = "fsl,lx2160a-pcie";
reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */
0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */
<0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "csr_axi_slave", "config_axi_slave";
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
......
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
View file @ 989e7e35
......@@ -77,9 +77,12 @@ fec1: ethernet@5b040000 {
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&enet0_lpcg IMX_LPCG_CLK_4>,
<&enet0_lpcg IMX_LPCG_CLK_2>,
<&enet0_lpcg IMX_LPCG_CLK_1>,
<&enet0_lpcg IMX_LPCG_CLK_3>,
<&enet0_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
assigned-clock-rates = <250000000>, <125000000>;
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_0>;
......@@ -94,9 +97,12 @@ fec2: ethernet@5b050000 {
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&enet1_lpcg IMX_LPCG_CLK_4>,
<&enet1_lpcg IMX_LPCG_CLK_2>,
<&enet1_lpcg IMX_LPCG_CLK_1>,
<&enet1_lpcg IMX_LPCG_CLK_3>,
<&enet1_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
assigned-clock-rates = <250000000>, <125000000>;
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_1>;
......@@ -152,15 +158,19 @@ enet0_lpcg: clock-controller@5b230000 {
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
<&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
<&conn_axi_clk>,
<&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
<&conn_ipg_clk>,
<&conn_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "enet0_ipg_root_clk",
"enet0_tx_clk",
"enet0_ahb_clk",
"enet0_ipg_clk",
"enet0_ipg_s_clk";
<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
clock-output-names = "enet0_lpcg_timer_clk",
"enet0_lpcg_txc_sampling_clk",
"enet0_lpcg_ahb_clk",
"enet0_lpcg_rgmii_txc_clk",
"enet0_lpcg_ipg_clk",
"enet0_lpcg_ipg_s_clk";
power-domains = <&pd IMX_SC_R_ENET_0>;
};
......@@ -170,15 +180,19 @@ enet1_lpcg: clock-controller@5b240000 {
#clock-cells = <1>;
clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
<&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
<&conn_axi_clk>,
<&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>,
<&conn_ipg_clk>,
<&conn_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "enet1_ipg_root_clk",
"enet1_tx_clk",
"enet1_ahb_clk",
"enet1_ipg_clk",
"enet1_ipg_s_clk";
<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
clock-output-names = "enet1_lpcg_timer_clk",
"enet1_lpcg_txc_sampling_clk",
"enet1_lpcg_ahb_clk",
"enet1_lpcg_rgmii_txc_clk",
"enet1_lpcg_ipg_clk",
"enet1_lpcg_ipg_s_clk";
power-domains = <&pd IMX_SC_R_ENET_1>;
};
};
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
View file @ 989e7e35
......@@ -314,6 +314,7 @@ &usbotg1 {
srp-disable;
adp-disable;
usb-role-switch;
disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts 0 → 100644
View file @ 989e7e35
This diff is collapsed.
arch/arm64/boot/dts/freescale/imx8mm.dtsi
View file @ 989e7e35
This diff is collapsed.
arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
View file @ 989e7e35
......@@ -120,6 +120,9 @@ pmic@4b {
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
buck1_reg: BUCK1 {
......
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
View file @ 989e7e35
......@@ -193,6 +193,7 @@ &usbotg1 {
srp-disable;
adp-disable;
usb-role-switch;
disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
......
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View file @ 989e7e35
......@@ -245,6 +245,7 @@ soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
nvmem-cells = <&imx8mn_uid>;
nvmem-cell-names = "soc_unique_id";
......@@ -255,7 +256,7 @@ aips1: bus@30000000 {
#size-cells = <1>;
ranges;
spba: spba-bus@30000000 {
spba2: spba-bus@30000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
......@@ -681,80 +682,88 @@ aips3: bus@30800000 {
#size-cells = <1>;
ranges;
ecspi1: spi@30820000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
spba1: spba-bus@30800000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30820000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
<&clk IMX8MN_CLK_ECSPI1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
#size-cells = <1>;
reg = <0x30800000 0x100000>;
ranges;
ecspi2: spi@30830000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30830000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
<&clk IMX8MN_CLK_ECSPI2_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi1: spi@30820000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30820000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
<&clk IMX8MN_CLK_ECSPI1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi3: spi@30840000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30840000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
<&clk IMX8MN_CLK_ECSPI3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi2: spi@30830000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30830000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
<&clk IMX8MN_CLK_ECSPI2_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@30860000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30860000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
<&clk IMX8MN_CLK_UART1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi3: spi@30840000 {
compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x30840000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
<&clk IMX8MN_CLK_ECSPI3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
uart3: serial@30880000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30880000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
<&clk IMX8MN_CLK_UART3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@30860000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30860000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
<&clk IMX8MN_CLK_UART1_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@30890000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
<&clk IMX8MN_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
status = "disabled";
uart3: serial@30880000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30880000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
<&clk IMX8MN_CLK_UART3_ROOT>;
clock-names = "ipg", "per";
dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@30890000 {
compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
<&clk IMX8MN_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
status = "disabled";
};
};
crypto: crypto@30900000 {
......
arch/arm64/boot/dts/freescale/imx8mp-evk.dts
View file @ 989e7e35
......@@ -81,6 +81,26 @@ &flexcan2 {
status = "disabled";/* can2 pin conflict with pdm */
};
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
eee-broken-1000t;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
......@@ -104,6 +124,92 @@ ethphy1: ethernet-phy@1 {
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic@25 {
compatible = "nxp,pca9450c";
reg = <0x25>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1025000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
};
BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3600000>;
regulator-boot-on;
regulator-always-on;
};
BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1950000>;
regulator-boot-on;
regulator-always-on;
};
BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <1045000>;
regulator-max-microvolt = <1155000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1950000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <1890000>;
regulator-boot-on;
regulator-always-on;
};
LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
......@@ -177,6 +283,26 @@ &wdog1 {
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
......@@ -229,6 +355,13 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
......@@ -236,6 +369,12 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
......
arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
View file @ 989e7e35
......@@ -65,6 +65,20 @@ ethphy1: ethernet-phy@0 {
};
};
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi0>;
status = "okay";
som_flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
......@@ -217,6 +231,17 @@ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11
>;
};
pinctrl_flexspi0: flexspi0grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
......
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View file @ 989e7e35
......@@ -37,6 +37,7 @@ aliases {
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
spi0 = &flexspi;
};
cpus {
......@@ -407,7 +408,6 @@ clk: clock-controller@30380000 {
<&clk IMX8MP_CLK_GIC>,
<&clk IMX8MP_CLK_AUDIO_AHB>,
<&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
<&clk IMX8MP_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MP_AUDIO_PLL1>,
<&clk IMX8MP_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
......@@ -423,7 +423,6 @@ clk: clock-controller@30380000 {
<500000000>,
<400000000>,
<800000000>,
<400000000>,
<393216000>,
<361267200>;
};
......@@ -761,6 +760,21 @@ usdhc3: mmc@30b60000 {
status = "disabled";
};
flexspi: spi@30bb0000 {
compatible = "nxp,imx8mp-fspi";
reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_QSPI_ROOT>,
<&clk IMX8MP_CLK_QSPI_ROOT>;
clock-names = "fspi", "fspi_en";
assigned-clock-rates = <80000000>;
assigned-clocks = <&clk IMX8MP_CLK_QSPI>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
......
arch/arm64/boot/dts/freescale/imx8mq-evk.dts
View file @ 989e7e35
......@@ -318,6 +318,7 @@ &pcie0 {
<&clk IMX8MQ_CLK_PCIE1_PHY>,
<&pcie0_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
vph-supply = <&vgen5_reg>;
status = "okay";
};
......
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
View file @ 989e7e35
......@@ -34,6 +34,30 @@ power {
};
};
hdmi-connector {
compatible = "hdmi-connector";
ddc-i2c-bus = <&ddc_i2c_bus>;
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&lt8912_out>;
};
};
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_vref_0v9: regulator-vref-0v9 {
compatible = "regulator-fixed";
regulator-name = "vref-0v9";
......@@ -70,6 +94,9 @@ reg_vref_5v: regulator-vref-5v {
};
};
&dphy {
status = "okay";
};
&fec1 {
pinctrl-names = "default";
......@@ -91,6 +118,15 @@ ethphy0: ethernet-phy@4 {
};
};
/* Release reset of the USB Host HUB */
&gpio1 {
usb-host-reset-hog {
gpio-hog;
gpios = <14 GPIO_ACTIVE_HIGH>;
output-high;
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
......@@ -174,6 +210,98 @@ rtc@68 {
};
};
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
pca9546: i2cmux@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c4@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
hdmi-bridge@48 {
compatible = "lontium,lt8912b";
reg = <0x48> ;
reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hdmi_out_in: endpoint {
data-lanes = <1 2 3 4>;
remote-endpoint = <&mipi_dsi_out>;
};
};
port@1 {
reg = <1>;
lt8912_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
};
ddc_i2c_bus: i2c4@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
};
i2c4@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
max7323: gpio-expander@68 {
compatible = "maxim,max7323";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_max7323>;
gpio-controller;
reg = <0x68>;
#gpio-cells = <2>;
};
};
};
};
&lcdif {
status = "okay";
};
&mipi_dsi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ports {
port@1 {
reg = <1>;
mipi_dsi_out: endpoint {
remote-endpoint = <&hdmi_out_in>;
};
};
};
};
&uart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
......@@ -190,6 +318,29 @@ &uart2 {
status = "okay";
};
&usb_dwc3_0 {
dr_mode = "otg";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3_0>;
status = "okay";
};
&usb3_phy0 {
vbus-supply = <&reg_usb_otg_vbus>;
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
&usb3_phy1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3_1>;
status = "okay";
};
&usdhc1 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
assigned-clock-rates = <400000000>;
......@@ -321,6 +472,19 @@ MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x49
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f
MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f
>;
};
pinctrl_max7323: max7323grp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19
>;
};
pinctrl_reg_arm_dram: reg-arm-dramgrp {
fsl,pins = <
MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16
......@@ -339,6 +503,12 @@ MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x16
>;
};
pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45
......@@ -353,6 +523,18 @@ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45
>;
};
pinctrl_usb3_0: usb3-0grp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x16
>;
};
pinctrl_usb3_1: usb3-1grp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
......
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View file @ 989e7e35
......@@ -1383,6 +1383,14 @@ pcie0: pcie@33800000 {
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
reset-names = "pciephy", "apps", "turnoff";
assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
<&clk IMX8MQ_CLK_PCIE1_PHY>,
<&clk IMX8MQ_CLK_PCIE1_AUX>;
assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
<&clk IMX8MQ_SYS2_PLL_100M>,
<&clk IMX8MQ_SYS1_PLL_80M>;
assigned-clock-rates = <250000000>, <100000000>,
<10000000>;
status = "disabled";
};
......@@ -1413,6 +1421,14 @@ pcie1: pcie@33c00000 {
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
<&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
reset-names = "pciephy", "apps", "turnoff";
assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
<&clk IMX8MQ_CLK_PCIE2_PHY>,
<&clk IMX8MQ_CLK_PCIE2_AUX>;
assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
<&clk IMX8MQ_SYS2_PLL_100M>,
<&clk IMX8MQ_SYS1_PLL_80M>;
assigned-clock-rates = <250000000>, <100000000>,
<10000000>;
status = "disabled";
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7