drm/msm/dp: do not initialize phy until plugin interrupt received
Current DP drivers have regulators, clocks, irq and phy are grouped together within a function and executed not in a symmetric manner. This increase difficulty of code maintenance and limited code scalability. This patch divides the driver life cycle of operation into four states, resume (including booting up), dongle plugin, dongle unplugged and suspend. Regulators, core clocks and irq are grouped together and enabled at resume (or booting up) so that the DP controller is armed and ready to receive HPD plugin interrupts. HPD plugin interrupt is generated when a dongle plugs into DUT (device under test). Once HPD plugin interrupt is received, DP controller will initialize phy so that dpcd read/write will function and following link training can be proceeded successfully. DP phy will be disabled after main link is teared down at end of unplugged HPD interrupt handle triggered by dongle unplugged out of DUT. Finally regulators, code clocks and irq are disabled at corresponding suspension. Changes in V2: -- removed unnecessary dp_ctrl NULL check -- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs -- remove flip parameter out of dp_ctrl_irq_enable() -- add fixes tag Changes in V3: -- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at dp_display_host_init() for eDP Changes in V4: -- rewording commit text to match this commit changes Changes in V5: -- rebase on top of msm-next branch Changes in V6: -- delete flip variable Changes in V7: -- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl() Changes in V8: -- add more detail comment regrading dp phy at dp_display_host_init() Changes in V9: -- remove set phy_initialized to false when -ECONNRESET detected Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Changes in v12: -- move dp_display_host_phy_exit() after dp_display_host_deinit() Changes in v13: -- do not execute phy_init until plugged_in interrupt for edp, same as DP. Changes in v14: -- remove redundant dp->core_initialized = false form dp_pm_suspend. Changes in v15: -- remove core_initialized flag check at both host_init and host_deinit Changes in v16: -- remove dp_display_host_phy_exit core_initialized=false at dp_pm_suspend Changes in v17: -- remove core_initialized checking before execute attention_cb() Changes in v18: -- remove core_initialized checking at dp_pm_suspend Fixes: 8ede2ecc ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1642531648-8448-2-git-send-email-quic_khsieh@quicinc.comSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Showing
Please register or sign in to comment