Commit 98a5f361 authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt Committed by Michael Ellerman

powerpc: Add new cache geometry aux vectors

This adds AUX vectors for the L1I,D, L2 and L3 cache levels
providing for each cache level the size of the cache in bytes
and the geometry (line size and number of ways).

We chose to not use the existing alpha/sh definition which
packs all the information in a single entry per cache level as
it is too restricted to represent some of the geometries used
on POWER.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 608b4214
...@@ -38,6 +38,7 @@ struct ppc_cache_info { ...@@ -38,6 +38,7 @@ struct ppc_cache_info {
u32 log_block_size; u32 log_block_size;
u32 blocks_per_page; u32 blocks_per_page;
u32 sets; u32 sets;
u32 assoc;
}; };
struct ppc64_caches { struct ppc64_caches {
......
...@@ -136,6 +136,25 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm, ...@@ -136,6 +136,25 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
#endif /* CONFIG_SPU_BASE */ #endif /* CONFIG_SPU_BASE */
#ifdef CONFIG_PPC64
#define get_cache_geometry(level) \
(ppc64_caches.level.assoc << 16 | ppc64_caches.level.line_size)
#define ARCH_DLINFO_CACHE_GEOMETRY \
NEW_AUX_ENT(AT_L1I_CACHESIZE, ppc64_caches.l1i.size); \
NEW_AUX_ENT(AT_L1I_CACHEGEOMETRY, get_cache_geometry(l1i)); \
NEW_AUX_ENT(AT_L1D_CACHESIZE, ppc64_caches.l1i.size); \
NEW_AUX_ENT(AT_L1D_CACHEGEOMETRY, get_cache_geometry(l1i)); \
NEW_AUX_ENT(AT_L2_CACHESIZE, ppc64_caches.l2.size); \
NEW_AUX_ENT(AT_L2_CACHEGEOMETRY, get_cache_geometry(l2)); \
NEW_AUX_ENT(AT_L3_CACHESIZE, ppc64_caches.l3.size); \
NEW_AUX_ENT(AT_L3_CACHEGEOMETRY, get_cache_geometry(l3))
#else
#define ARCH_DLINFO_CACHE_GEOMETRY
#endif
/* /*
* The requirements here are: * The requirements here are:
* - keep the final alignment of sp (sp & 0xf) * - keep the final alignment of sp (sp & 0xf)
...@@ -156,6 +175,7 @@ do { \ ...@@ -156,6 +175,7 @@ do { \
NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \ NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \
NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \ NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \
VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base); \ VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base); \
ARCH_DLINFO_CACHE_GEOMETRY; \
} while (0) } while (0)
#endif /* _ASM_POWERPC_ELF_H */ #endif /* _ASM_POWERPC_ELF_H */
...@@ -16,6 +16,37 @@ ...@@ -16,6 +16,37 @@
*/ */
#define AT_SYSINFO_EHDR 33 #define AT_SYSINFO_EHDR 33
#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ /*
* AT_*CACHEBSIZE above represent the cache *block* size which is
* the size that is affected by the cache management instructions.
*
* It doesn't nececssarily matches the cache *line* size which is
* more of a performance tuning hint. Additionally the latter can
* be different for the different cache levels.
*
* The set of entries below represent more extensive information
* about the caches, in the form of two entry per cache type,
* one entry containing the cache size in bytes, and the other
* containing the cache line size in bytes in the bottom 16 bits
* and the cache associativity in the next 16 bits.
*
* The associativity is such that if N is the 16-bit value, the
* cache is N way set associative. A value if 0xffff means fully
* associative, a value of 1 means directly mapped.
*
* For all these fields, a value of 0 means that the information
* is not known.
*/
#define AT_L1I_CACHESIZE 40
#define AT_L1I_CACHEGEOMETRY 41
#define AT_L1D_CACHESIZE 42
#define AT_L1D_CACHEGEOMETRY 43
#define AT_L2_CACHESIZE 44
#define AT_L2_CACHEGEOMETRY 45
#define AT_L3_CACHESIZE 46
#define AT_L3_CACHEGEOMETRY 47
#define AT_VECTOR_SIZE_ARCH 14 /* entries in ARCH_DLINFO */
#endif #endif
...@@ -411,6 +411,11 @@ static void init_cache_info(struct ppc_cache_info *info, u32 size, u32 lsize, ...@@ -411,6 +411,11 @@ static void init_cache_info(struct ppc_cache_info *info, u32 size, u32 lsize,
info->block_size = bsize; info->block_size = bsize;
info->log_block_size = __ilog2(bsize); info->log_block_size = __ilog2(bsize);
info->blocks_per_page = PAGE_SIZE / bsize; info->blocks_per_page = PAGE_SIZE / bsize;
if (sets == 0)
info->assoc = 0xffff;
else
info->assoc = size / (sets * lsize);
} }
static bool __init parse_cache_info(struct device_node *np, static bool __init parse_cache_info(struct device_node *np,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment