Skip to content

L
linux
Commit 98ac0cc2 authored by Linus Walleij's avatar Linus Walleij
Browse files
Options

ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER 

This rewrites the IXP4xx to use MULTI_IRQ_HANDLER and
create an irqdomain for the irqchip in the platform. We
convert the timer to request the interrupt like any other
driver in the process.

We bump all IRQs to 16+offset to avoid using IRQ 0 and
set NR_IRQS to 512 (the default for most systems).
This conveniently fits with the first 16 IRQs being
pre-allocated when using SPARSE_IRQ.

This is a prerequisite for SPARSE_IRQ and DT boot.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 64534e06
Hide whitespace changes
Inline Side-by-side
Showing with 126 additions and 120 deletions
arch/arm/Kconfig
View file @ 98ac0cc2
......@@ -433,6 +433,7 @@ config ARCH_IXP4XX
select CPU_XSCALE
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_PCI
select NEED_MACH_IO_H
......
arch/arm/mach-ixp4xx/common.c
View file @ 98ac0cc2
......@@ -31,12 +31,14 @@
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/sched_clock.h>
#include <linux/bitops.h>
#include <mach/udc.h>
#include <mach/hardware.h>
#include <mach/io.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/exception.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
......@@ -54,6 +56,7 @@
(IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
(IXP4XX_OST_RELOAD_MASK + 1)
static struct irq_domain *ixp4xx_irqdomain;
static void __init ixp4xx_clocksource_init(void);
static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
......@@ -166,16 +169,17 @@ static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
{
int line = irq2gpio[d->irq];
int line = irq2gpio[d->hwirq];
u32 int_style;
enum ixp4xx_irq_type irq_type;
volatile u32 *int_reg;
/*
* Only for GPIO IRQs
* all other IRQs are simply active low
*/
if (line < 0)
return -EINVAL;
return 0;
switch (type){
case IRQ_TYPE_EDGE_BOTH:
......@@ -203,9 +207,9 @@ static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
}
if (irq_type == IXP4XX_IRQ_EDGE)
ixp4xx_irq_edge |= (1 << d->irq);
ixp4xx_irq_edge |= (1 << d->hwirq);
else
ixp4xx_irq_edge &= ~(1 << d->irq);
ixp4xx_irq_edge &= ~(1 << d->hwirq);
if (line >= 8) { /* pins 8-15 */
line -= 8;
......@@ -224,22 +228,22 @@ static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
/* Configure the line as an input */
gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN);
gpio_line_config(irq2gpio[d->hwirq], IXP4XX_GPIO_IN);
return 0;
}
static void ixp4xx_irq_mask(struct irq_data *d)
{
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
*IXP4XX_ICMR2 &= ~(1 << (d->irq - 32));
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->hwirq >= 32)
*IXP4XX_ICMR2 &= ~(1 << (d->hwirq - 32));
else
*IXP4XX_ICMR &= ~(1 << d->irq);
*IXP4XX_ICMR &= ~(1 << d->hwirq);
}
static void ixp4xx_irq_ack(struct irq_data *d)
{
int line = (d->irq < 32) ? irq2gpio[d->irq] : -1;
int line = (d->hwirq < 32) ? irq2gpio[d->hwirq] : -1;
if (line >= 0)
*IXP4XX_GPIO_GPISR = (1 << line);
......@@ -251,13 +255,13 @@ static void ixp4xx_irq_ack(struct irq_data *d)
*/
static void ixp4xx_irq_unmask(struct irq_data *d)
{
if (!(ixp4xx_irq_edge & (1 << d->irq)))
if (!(ixp4xx_irq_edge & (1 << d->hwirq)))
ixp4xx_irq_ack(d);
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
*IXP4XX_ICMR2 |= (1 << (d->irq - 32));
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->hwirq >= 32)
*IXP4XX_ICMR2 |= (1 << (d->hwirq - 32));
else
*IXP4XX_ICMR |= (1 << d->irq);
*IXP4XX_ICMR |= (1 << d->hwirq);
}
static struct irq_chip ixp4xx_irq_chip = {
......@@ -268,9 +272,50 @@ static struct irq_chip ixp4xx_irq_chip = {
.irq_set_type = ixp4xx_set_irq_type,
};
asmlinkage void __exception_irq_entry ixp4xx_handle_irq(struct pt_regs *regs)
{
unsigned long status;
int i;
status = *IXP4XX_ICIP;
for_each_set_bit(i, &status, 32)
handle_domain_irq(ixp4xx_irqdomain, i, regs);
/*
* IXP465/IXP435 has an upper IRQ status register
*/
if ((cpu_is_ixp46x() || cpu_is_ixp43x())) {
status = *IXP4XX_ICIP2;
for_each_set_bit(i, &status, 32)
handle_domain_irq(ixp4xx_irqdomain, i + 32, regs);
}
}
static int ixp4xx_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_data(irq, &ixp4xx_irq_chip);
irq_set_chip_and_handler(irq, &ixp4xx_irq_chip, handle_level_irq);
irq_set_probe(irq);
return 0;
}
static void ixp4xx_irqdomain_unmap(struct irq_domain *d, unsigned int irq)
{
irq_set_chip_and_handler(irq, NULL, NULL);
irq_set_chip_data(irq, NULL);
}
static const struct irq_domain_ops ixp4xx_irqdomain_ops = {
.map = ixp4xx_irqdomain_map,
.unmap = ixp4xx_irqdomain_unmap,
};
void __init ixp4xx_init_irq(void)
{
int i = 0;
int nr_irqs;
/*
* ixp4xx does not implement the XScale PWRMODE register
......@@ -290,14 +335,21 @@ void __init ixp4xx_init_irq(void)
/* Disable upper 32 interrupts */
*IXP4XX_ICMR2 = 0x00;
nr_irqs = 64;
} else {
nr_irqs = 32;
}
/* Default to all level triggered */
for(i = 0; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &ixp4xx_irq_chip,
handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST);
ixp4xx_irqdomain = irq_domain_add_simple(NULL, nr_irqs, IRQ_IXP4XX_BASE,
&ixp4xx_irqdomain_ops,
NULL);
if (!ixp4xx_irqdomain) {
pr_crit("can not add primary irqdomain\n");
return;
}
set_handle_irq(ixp4xx_handle_irq);
}
......@@ -319,13 +371,6 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction ixp4xx_timer_irq = {
.name = "timer1",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = ixp4xx_timer_interrupt,
.dev_id = &clockevent_ixp4xx,
};
void __init ixp4xx_timer_init(void)
{
/* Reset/disable counter */
......@@ -337,9 +382,6 @@ void __init ixp4xx_timer_init(void)
/* Reset time-stamp counter */
*IXP4XX_OSTS = 0;
/* Connect the interrupt handler and enable the interrupt */
setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
ixp4xx_clocksource_init();
ixp4xx_clockevent_init();
}
......@@ -574,7 +616,16 @@ static struct clock_event_device clockevent_ixp4xx = {
static void __init ixp4xx_clockevent_init(void)
{
int ret;
clockevent_ixp4xx.cpumask = cpumask_of(0);
clockevent_ixp4xx.irq = IRQ_IXP4XX_TIMER1;
ret = request_irq(IRQ_IXP4XX_TIMER1, ixp4xx_timer_interrupt,
IRQF_TIMER, "IXP4XX-TIMER1", &clockevent_ixp4xx);
if (ret) {
pr_crit("no timer IRQ\n");
return;
}
clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
0xf, 0xfffffffe);
}
......
arch/arm/mach-ixp4xx/include/mach/entry-macro.S deleted 100644 → 0
View file @ 64534e06
/*
* arch/arm/mach-ixp4xx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for IXP4xx-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
.macro get_irqnr_preamble, base, tmp
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
ldr \irqstat, [\irqstat] @ get interrupts
cmp \irqstat, #0
beq 1001f @ upper IRQ?
clz \irqnr, \irqstat
mov \base, #31
sub \irqnr, \base, \irqnr
b 1002f @ lower IRQ being
@ handled
1001:
/*
* IXP465/IXP435 has an upper IRQ status register
*/
#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
ldr \irqstat, [\irqstat] @ get upper interrupts
mov \irqnr, #63
clz \irqstat, \irqstat
cmp \irqstat, #32
subne \irqnr, \irqnr, \irqstat
#endif
1002:
.endm
arch/arm/mach-ixp4xx/include/mach/irqs.h
View file @ 98ac0cc2
......@@ -15,60 +15,55 @@
#ifndef _ARCH_IXP4XX_IRQS_H_
#define _ARCH_IXP4XX_IRQS_H_
#define IRQ_IXP4XX_NPEA 0
#define IRQ_IXP4XX_NPEB 1
#define IRQ_IXP4XX_NPEC 2
#define IRQ_IXP4XX_QM1 3
#define IRQ_IXP4XX_QM2 4
#define IRQ_IXP4XX_TIMER1 5
#define IRQ_IXP4XX_GPIO0 6
#define IRQ_IXP4XX_GPIO1 7
#define IRQ_IXP4XX_PCI_INT 8
#define IRQ_IXP4XX_PCI_DMA1 9
#define IRQ_IXP4XX_PCI_DMA2 10
#define IRQ_IXP4XX_TIMER2 11
#define IRQ_IXP4XX_USB 12
#define IRQ_IXP4XX_UART2 13
#define IRQ_IXP4XX_TIMESTAMP 14
#define IRQ_IXP4XX_UART1 15
#define IRQ_IXP4XX_WDOG 16
#define IRQ_IXP4XX_AHB_PMU 17
#define IRQ_IXP4XX_XSCALE_PMU 18
#define IRQ_IXP4XX_GPIO2 19
#define IRQ_IXP4XX_GPIO3 20
#define IRQ_IXP4XX_GPIO4 21
#define IRQ_IXP4XX_GPIO5 22
#define IRQ_IXP4XX_GPIO6 23
#define IRQ_IXP4XX_GPIO7 24
#define IRQ_IXP4XX_GPIO8 25
#define IRQ_IXP4XX_GPIO9 26
#define IRQ_IXP4XX_GPIO10 27
#define IRQ_IXP4XX_GPIO11 28
#define IRQ_IXP4XX_GPIO12 29
#define IRQ_IXP4XX_SW_INT1 30
#define IRQ_IXP4XX_SW_INT2 31
#define IRQ_IXP4XX_USB_HOST 32
#define IRQ_IXP4XX_I2C 33
#define IRQ_IXP4XX_SSP 34
#define IRQ_IXP4XX_TSYNC 35
#define IRQ_IXP4XX_EAU_DONE 36
#define IRQ_IXP4XX_SHA_DONE 37
#define IRQ_IXP4XX_SWCP_PE 58
#define IRQ_IXP4XX_QM_PE 60
#define IRQ_IXP4XX_MCU_ECC 61
#define IRQ_IXP4XX_EXP_PE 62
#define IRQ_IXP4XX_BASE 16
#define IRQ_IXP4XX_NPEA (IRQ_IXP4XX_BASE + 0)
#define IRQ_IXP4XX_NPEB (IRQ_IXP4XX_BASE + 1)
#define IRQ_IXP4XX_NPEC (IRQ_IXP4XX_BASE + 2)
#define IRQ_IXP4XX_QM1 (IRQ_IXP4XX_BASE + 3)
#define IRQ_IXP4XX_QM2 (IRQ_IXP4XX_BASE + 4)
#define IRQ_IXP4XX_TIMER1 (IRQ_IXP4XX_BASE + 5)
#define IRQ_IXP4XX_GPIO0 (IRQ_IXP4XX_BASE + 6)
#define IRQ_IXP4XX_GPIO1 (IRQ_IXP4XX_BASE + 7)
#define IRQ_IXP4XX_PCI_INT (IRQ_IXP4XX_BASE + 8)
#define IRQ_IXP4XX_PCI_DMA1 (IRQ_IXP4XX_BASE + 9)
#define IRQ_IXP4XX_PCI_DMA2 (IRQ_IXP4XX_BASE + 10)
#define IRQ_IXP4XX_TIMER2 (IRQ_IXP4XX_BASE + 11)
#define IRQ_IXP4XX_USB (IRQ_IXP4XX_BASE + 12)
#define IRQ_IXP4XX_UART2 (IRQ_IXP4XX_BASE + 13)
#define IRQ_IXP4XX_TIMESTAMP (IRQ_IXP4XX_BASE + 14)
#define IRQ_IXP4XX_UART1 (IRQ_IXP4XX_BASE + 15)
#define IRQ_IXP4XX_WDOG (IRQ_IXP4XX_BASE + 16)
#define IRQ_IXP4XX_AHB_PMU (IRQ_IXP4XX_BASE + 17)
#define IRQ_IXP4XX_XSCALE_PMU (IRQ_IXP4XX_BASE + 18)
#define IRQ_IXP4XX_GPIO2 (IRQ_IXP4XX_BASE + 19)
#define IRQ_IXP4XX_GPIO3 (IRQ_IXP4XX_BASE + 20)
#define IRQ_IXP4XX_GPIO4 (IRQ_IXP4XX_BASE + 21)
#define IRQ_IXP4XX_GPIO5 (IRQ_IXP4XX_BASE + 22)
#define IRQ_IXP4XX_GPIO6 (IRQ_IXP4XX_BASE + 23)
#define IRQ_IXP4XX_GPIO7 (IRQ_IXP4XX_BASE + 24)
#define IRQ_IXP4XX_GPIO8 (IRQ_IXP4XX_BASE + 25)
#define IRQ_IXP4XX_GPIO9 (IRQ_IXP4XX_BASE + 26)
#define IRQ_IXP4XX_GPIO10 (IRQ_IXP4XX_BASE + 27)
#define IRQ_IXP4XX_GPIO11 (IRQ_IXP4XX_BASE + 28)
#define IRQ_IXP4XX_GPIO12 (IRQ_IXP4XX_BASE + 29)
#define IRQ_IXP4XX_SW_INT1 (IRQ_IXP4XX_BASE + 30)
#define IRQ_IXP4XX_SW_INT2 (IRQ_IXP4XX_BASE + 31)
#define IRQ_IXP4XX_USB_HOST (IRQ_IXP4XX_BASE + 32)
#define IRQ_IXP4XX_I2C (IRQ_IXP4XX_BASE + 33)
#define IRQ_IXP4XX_SSP (IRQ_IXP4XX_BASE + 34)
#define IRQ_IXP4XX_TSYNC (IRQ_IXP4XX_BASE + 35)
#define IRQ_IXP4XX_EAU_DONE (IRQ_IXP4XX_BASE + 36)
#define IRQ_IXP4XX_SHA_DONE (IRQ_IXP4XX_BASE + 37)
#define IRQ_IXP4XX_SWCP_PE (IRQ_IXP4XX_BASE + 58)
#define IRQ_IXP4XX_QM_PE (IRQ_IXP4XX_BASE + 60)
#define IRQ_IXP4XX_MCU_ECC (IRQ_IXP4XX_BASE + 61)
#define IRQ_IXP4XX_EXP_PE (IRQ_IXP4XX_BASE + 62)
#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n)
#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n)
/*
* Only first 32 sources are valid if running on IXP42x systems
*/
#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
#define NR_IRQS 64
#else
#define NR_IRQS 32
#endif
#define NR_IRQS 512
#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7