Commit 98cd1552 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: dsa: Mock-up driver

This patch adds support for a DSA mock-up driver which essentially does
the following:

- registers/unregisters 4 fixed PHYs to the slave network devices
- uses eth0 (configurable) as the master netdev
- registers the switch as a fixed MDIO device against the fixed MDIO bus
  at address 31
- includes dynamic debug prints for dsa_switch_ops functions that can be
  enabled to get call traces

This is a good way to test modular builds as well as exercise the DSA
APIs without requiring access to real hardware. This does not test the
data-path, although this could be added later on.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 772c3bda
......@@ -34,4 +34,12 @@ config NET_DSA_QCA8K
This enables support for the Qualcomm Atheros QCA8K Ethernet
switch chips.
config NET_DSA_LOOP
tristate "DSA mock-up Ethernet switch chip support"
depends on NET_DSA
select FIXED_PHY
---help---
This enables support for a fake mock-up switch chip which
exercises the DSA APIs.
endmenu
......@@ -2,6 +2,6 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o
bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
obj-y += b53/
obj-y += mv88e6xxx/
obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o dsa_loop_bdinfo.o
/*
* Distributed Switch Architecture loopback driver
*
* Copyright (C) 2016, Florian Fainelli <f.fainelli@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/platform_device.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/export.h>
#include <linux/workqueue.h>
#include <linux/module.h>
#include <linux/if_bridge.h>
#include <net/switchdev.h>
#include <net/dsa.h>
#include "dsa_loop.h"
struct dsa_loop_vlan {
u16 members;
u16 untagged;
};
#define DSA_LOOP_VLANS 5
struct dsa_loop_priv {
struct mii_bus *bus;
unsigned int port_base;
struct dsa_loop_vlan vlans[DSA_LOOP_VLANS];
struct net_device *netdev;
u16 pvid;
};
static struct phy_device *phydevs[PHY_MAX_ADDR];
static enum dsa_tag_protocol dsa_loop_get_protocol(struct dsa_switch *ds)
{
dev_dbg(ds->dev, "%s\n", __func__);
return DSA_TAG_PROTO_NONE;
}
static int dsa_loop_setup(struct dsa_switch *ds)
{
dev_dbg(ds->dev, "%s\n", __func__);
return 0;
}
static int dsa_loop_set_addr(struct dsa_switch *ds, u8 *addr)
{
dev_dbg(ds->dev, "%s\n", __func__);
return 0;
}
static int dsa_loop_phy_read(struct dsa_switch *ds, int port, int regnum)
{
struct dsa_loop_priv *ps = ds->priv;
struct mii_bus *bus = ps->bus;
dev_dbg(ds->dev, "%s\n", __func__);
return mdiobus_read_nested(bus, ps->port_base + port, regnum);
}
static int dsa_loop_phy_write(struct dsa_switch *ds, int port,
int regnum, u16 value)
{
struct dsa_loop_priv *ps = ds->priv;
struct mii_bus *bus = ps->bus;
dev_dbg(ds->dev, "%s\n", __func__);
return mdiobus_write_nested(bus, ps->port_base + port, regnum, value);
}
static int dsa_loop_port_bridge_join(struct dsa_switch *ds, int port,
struct net_device *bridge)
{
dev_dbg(ds->dev, "%s\n", __func__);
return 0;
}
static void dsa_loop_port_bridge_leave(struct dsa_switch *ds, int port,
struct net_device *bridge)
{
dev_dbg(ds->dev, "%s\n", __func__);
}
static void dsa_loop_port_stp_state_set(struct dsa_switch *ds, int port,
u8 state)
{
dev_dbg(ds->dev, "%s\n", __func__);
}
static int dsa_loop_port_vlan_filtering(struct dsa_switch *ds, int port,
bool vlan_filtering)
{
dev_dbg(ds->dev, "%s\n", __func__);
return 0;
}
static int dsa_loop_port_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans)
{
struct dsa_loop_priv *ps = ds->priv;
struct mii_bus *bus = ps->bus;
dev_dbg(ds->dev, "%s\n", __func__);
/* Just do a sleeping operation to make lockdep checks effective */
mdiobus_read(bus, ps->port_base + port, MII_BMSR);
if (vlan->vid_end > DSA_LOOP_VLANS)
return -ERANGE;
return 0;
}
static void dsa_loop_port_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans)
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
struct dsa_loop_priv *ps = ds->priv;
struct mii_bus *bus = ps->bus;
struct dsa_loop_vlan *vl;
u16 vid;
dev_dbg(ds->dev, "%s\n", __func__);
/* Just do a sleeping operation to make lockdep checks effective */
mdiobus_read(bus, ps->port_base + port, MII_BMSR);
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
vl = &ps->vlans[vid];
vl->members |= BIT(port);
if (untagged)
vl->untagged |= BIT(port);
else
vl->untagged &= ~BIT(port);
}
if (pvid)
ps->pvid = vid;
}
static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
struct dsa_loop_priv *ps = ds->priv;
struct mii_bus *bus = ps->bus;
struct dsa_loop_vlan *vl;
u16 vid, pvid;
dev_dbg(ds->dev, "%s\n", __func__);
/* Just do a sleeping operation to make lockdep checks effective */
mdiobus_read(bus, ps->port_base + port, MII_BMSR);
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
vl = &ps->vlans[vid];
vl->members &= ~BIT(port);
if (untagged)
vl->untagged &= ~BIT(port);
if (pvid == vid)
pvid = 1;
}
ps->pvid = pvid;
return 0;
}
static int dsa_loop_port_vlan_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_vlan *vlan,
int (*cb)(struct switchdev_obj *obj))
{
struct dsa_loop_priv *ps = ds->priv;
struct mii_bus *bus = ps->bus;
struct dsa_loop_vlan *vl;
u16 vid, vid_start = 0;
int err;
dev_dbg(ds->dev, "%s\n", __func__);
/* Just do a sleeping operation to make lockdep checks effective */
mdiobus_read(bus, ps->port_base + port, MII_BMSR);
for (vid = vid_start; vid < DSA_LOOP_VLANS; vid++) {
vl = &ps->vlans[vid];
if (!(vl->members & BIT(port)))
continue;
vlan->vid_begin = vlan->vid_end = vid;
vlan->flags = 0;
if (vl->untagged & BIT(port))
vlan->flags |= BRIDGE_VLAN_INFO_UNTAGGED;
if (ps->pvid == vid)
vlan->flags |= BRIDGE_VLAN_INFO_PVID;
err = cb(&vlan->obj);
if (err)
break;
}
return err;
}
static struct dsa_switch_ops dsa_loop_driver = {
.get_tag_protocol = dsa_loop_get_protocol,
.setup = dsa_loop_setup,
.set_addr = dsa_loop_set_addr,
.phy_read = dsa_loop_phy_read,
.phy_write = dsa_loop_phy_write,
.port_bridge_join = dsa_loop_port_bridge_join,
.port_bridge_leave = dsa_loop_port_bridge_leave,
.port_stp_state_set = dsa_loop_port_stp_state_set,
.port_vlan_filtering = dsa_loop_port_vlan_filtering,
.port_vlan_prepare = dsa_loop_port_vlan_prepare,
.port_vlan_add = dsa_loop_port_vlan_add,
.port_vlan_del = dsa_loop_port_vlan_del,
.port_vlan_dump = dsa_loop_port_vlan_dump,
};
static int dsa_loop_drv_probe(struct mdio_device *mdiodev)
{
struct dsa_loop_pdata *pdata = mdiodev->dev.platform_data;
struct dsa_loop_priv *ps;
struct dsa_switch *ds;
if (!pdata)
return -ENODEV;
dev_info(&mdiodev->dev, "%s: 0x%0x\n",
pdata->name, pdata->enabled_ports);
ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
if (!ds)
return -ENOMEM;
ps = devm_kzalloc(&mdiodev->dev, sizeof(*ps), GFP_KERNEL);
ps->netdev = dev_get_by_name(&init_net, pdata->netdev);
if (!ps->netdev)
return -EPROBE_DEFER;
pdata->cd.netdev[DSA_LOOP_CPU_PORT] = &ps->netdev->dev;
ds->dev = &mdiodev->dev;
ds->ops = &dsa_loop_driver;
ds->priv = ps;
ps->bus = mdiodev->bus;
dev_set_drvdata(&mdiodev->dev, ds);
return dsa_register_switch(ds, ds->dev);
}
static void dsa_loop_drv_remove(struct mdio_device *mdiodev)
{
struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
struct dsa_loop_priv *ps = ds->priv;
dsa_unregister_switch(ds);
dev_put(ps->netdev);
}
static struct mdio_driver dsa_loop_drv = {
.mdiodrv.driver = {
.name = "dsa-loop",
},
.probe = dsa_loop_drv_probe,
.remove = dsa_loop_drv_remove,
};
#define NUM_FIXED_PHYS (DSA_LOOP_NUM_PORTS - 2)
static void unregister_fixed_phys(void)
{
unsigned int i;
for (i = 0; i < NUM_FIXED_PHYS; i++)
if (phydevs[i])
fixed_phy_unregister(phydevs[i]);
}
static int __init dsa_loop_init(void)
{
struct fixed_phy_status status = {
.link = 1,
.speed = SPEED_100,
.duplex = DUPLEX_FULL,
};
unsigned int i;
for (i = 0; i < NUM_FIXED_PHYS; i++)
phydevs[i] = fixed_phy_register(PHY_POLL, &status, -1, NULL);
return mdio_driver_register(&dsa_loop_drv);
}
module_init(dsa_loop_init);
static void __exit dsa_loop_exit(void)
{
mdio_driver_unregister(&dsa_loop_drv);
unregister_fixed_phys();
}
module_exit(dsa_loop_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Florian Fainelli");
MODULE_DESCRIPTION("DSA loopback driver");
#ifndef __DSA_LOOP_H
#define __DSA_LOOP_H
struct dsa_chip_data;
struct dsa_loop_pdata {
/* Must be first, such that dsa_register_switch() can access this
* without gory pointer manipulations
*/
struct dsa_chip_data cd;
const char *name;
unsigned int enabled_ports;
const char *netdev;
};
#define DSA_LOOP_NUM_PORTS 6
#define DSA_LOOP_CPU_PORT (DSA_LOOP_NUM_PORTS - 1)
#endif /* __DSA_LOOP_H */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/phy.h>
#include <net/dsa.h>
#include "dsa_loop.h"
static struct dsa_loop_pdata dsa_loop_pdata = {
.cd = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
.port_names[3] = "lan4",
.port_names[DSA_LOOP_CPU_PORT] = "cpu",
},
.name = "DSA mockup driver",
.enabled_ports = 0x1f,
.netdev = "eth0",
};
static const struct mdio_board_info bdinfo = {
.bus_id = "fixed-0",
.modalias = "dsa-loop",
.mdio_addr = 31,
.platform_data = &dsa_loop_pdata,
};
static int __init dsa_loop_bdinfo_init(void)
{
return mdiobus_register_board_info(&bdinfo, 1);
}
arch_initcall(dsa_loop_bdinfo_init)
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment